Structural Features Promoting Photocatalytic Degradation of Contaminants of Emerging Concern: Insights into Degradation Mechanism Employing QSA/PR Modeling.

Although heterogeneous photocatalysis has shown promising results in degradation of contaminants of emerging concern (CECs), the mechanistic implications related to structural diversity of chemicals, affecting oxidative (by HO•) or reductive (by O2•-) degradation pathways are still scarce. In this study, the degradation extents and rates of selected organics in the absence and presence of common scavengers for reactive oxygen species (ROS) generated during photocatalytic treatment were determined. The obtained values were then brought into correlation as K coefficients (MHO•/MO2•-), denoting the ratio of organics degraded by two occurring mechanisms: oxidation and reduction via HO• and O2•-. The compounds possessing K >> 1 favor oxidative degradation over HO•, and vice versa for reductive degradation (i.e., if K << 1 compounds undergo reductive reactions driven by O2•-). Such empirical values were brought into correlation with structural features of CECs, represented by molecular descriptors, employing a quantitative structure activity/property relationship (QSA/PR) modeling. The functional stability and predictive power of the resulting QSA/PR model was confirmed by internal and external cross-validation. The most influential descriptors were found to be the size of the molecule and presence/absence of particular molecular fragments such as C - O and C - Cl bonds; the latter favors HO•-driven reaction, while the former the reductive pathway. The developed QSA/PR models can be considered robust predictive tools for evaluating distribution between degradation mechanisms occurring in photocatalytic treatment.

Effect of Functionalized Benzene Derivatives as Potential Hole Scavengers for BiVO4 and rGO-BiVO4 Photoelectrocatalytic Hydrogen Evolution.

Sustainable hydrogen production is one of the main challenges today in the transition to a green and sustainable economy. Photocatalytic hydrogen production is one of the most promising technologies, amongst which BiVO4-based processes are highly attractive due to their suitable band gap for solar-driven processes. However, the performance of BiVO4 alone in this role is often unsatisfactory. Herein we report the improvement of BiVO4 performance with reduced graphene oxide (rGO) as a co-catalyst for the photoelectrochemical water splitting (PEC-WS) in the presence of simple functionalized benzene derivatives (SFBDs), i.e., phenol (PH), benzoic acid (BA), salicylic acid (SA), and 5-aminosalicylic acid (5-ASA) as potential photogenerated hole scavengers from contaminated wastewaters. Linear sweep voltammetry and chronoamperometry, along with electrochemical impedance spectroscopy were utilized to elucidate PEC-WS performance under illumination. rGO has remarkably improved the performance of BiVO4 in this role by decreasing photogenerated charge recombination. In addition, 5-ASA greatly improved current densities. After 120 min under LED illumination, 0.53 µmol of H2 was produced. The type and concentration of SFBDs can have significant and at times opposite effects on the PEC-WS performance of both BiVO4 and rGO-BiVO4.

Toxicity of aromatic pollutants and photooxidative intermediates in water: A QSAR study.

Extensive commercial use of aromatic hydrocarbons results with significant amounts of these chemicals and related by-products in waters, causing a severe ecological and health threat, thus requiring an increased attention. This study was aimed at developing models for prediction of the initial toxicity of the aromatic water-pollutants (expressed as EC50 and TU0) as well as the toxicity of their intermediates at half-life of the parent pollutant (TU1/2). For that purpose, toxicity toward Vibrio fischery was determined for 36 single-benzene ring compounds (S-BRCs), diversified by the type, number and position of substituents. Quantitative structure-activity relationship (QSAR) methodology paired with genetic algorithm optimization tool and multiple linear regression was applied to obtain the models predicting the targeted toxicity, which are based on pure structural characteristics of the tested pollutants, avoiding thus additional experimentation. Upon derivation of the models and extensive analysis on training and test sets, 4-, 4- and 5-variable models (for EC50 and TU0, TU1/2, respectively) were selected as the most predictive possessing 0.839

Prediction of biodegradability of aromatics in water using QSAR modeling.

The study was aimed at developing models for predicting the biodegradability of aromatic water pollutants. For that purpose, 36 single-benzene ring compounds, with different type, number and position of substituents, were used. The biodegradability was estimated according to the ratio of the biochemical (BOD5) and chemical (COD) oxygen demand values determined for parent compounds ((BOD5/COD)0), as well as for their reaction mixtures in half-life achieved by UV-C/H2O2 process ((BOD5/COD)t1/2). The models correlating biodegradability and molecular structure characteristics of studied pollutants were derived using quantitative structure-activity relationship (QSAR) principles and tools. Upon derivation of the models and calibration on the training and subsequent testing on the test set, 3- and 5-variable models were selected as the most predictive for (BOD5/COD)0 and (BOD5/COD)t1/2, respectively, according to the values of statistical parameters R2 and Q2. Hence, 3-variable model predicting (BOD5/COD)0 possessed R2=0.863 and Q2=0.799 for training set, and R2=0.710 for test set, while 5-variable model predicting (BOD5/COD)1/2 possessed R2=0.886 and Q2=0.788 for training set, and R2=0.564 for test set. The selected models are interpretable and transparent, reflecting key structural features that influence targeted biodegradability and can be correlated with the degradation mechanisms of studied compounds by UV-C/H2O2.

Fragmentation of polypropylene into microplastics promoted by photo-aging; release of metals, toxicity and inhibition of biodegradability.

The widespread presence of microplastics (MP) in water represents an environmental problem, not only because of the harmful effects of their size and potential to vector other pollutants, but also because of the release of additives, degradation products and residues contained in the polymer matrix. The latter includes metallic catalysts, which are often overlooked. This study focuses on the photo-aging of polypropylene (PP) and the resulting structural changes that promote its fragmentation microplastics (PP-MPs) and release of metals, as well as the resulting toxicity of leachates and their potential to inhibit biodegradation of organics in water. The pristine, photo-aged and waste PP are ground under the same regime to assess susceptibility to fragmentation. Obtained PP-MPs are submitted to leaching tests; the release of organics and metals is monitored by Total Organic Carbon (TOC) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) analysis, respectively. The leachates are assessed for their toxicity against Vibrio fischeri, Daphnia magna and Pseudokirchneriella subcapitata and their influence on the biodegradability of the glucose solution. Photo-aging induced changes in the crystallinity and morphology of the PP and manifested in the abundance of smaller MPs, as revealed by the particle size distribution. In the case of pristine PP, all particles were > 100 µm in size, while aged PP yielded significant mass fraction of MPs <100 µm. The toxicity of leachates from aged PP-MPs is higher than that of pristine and exhibits a positive correlation with portion of metals released. The biodegradability of glucose is strongly inhibited by PP-MPs leachates containing a mixture of metals in trace concentrations.

Effect of Aging on Physicochemical Properties and Size Distribution of PET Microplastic: Influence on Adsorption of Diclofenac and Toxicity Assessment.

Microplastics (MPs) are detected in the water, sediments, as well as biota, mainly as a consequence of the degradation of plastic products/waste under environmental conditions. Due to their potentially harmful effects on ecosystems and organisms, MPs are regarded as emerging pollutants. The highly problematic aspect of MPs is their interaction with organic and inorganic pollutants; MPs can act as vectors for their further transport in the environment. The objective of this study was to investigate the effects of ageing on the changes in physicochemical properties and size distribution of polyethylene terephthalate (PET), as well as to investigate the adsorption capacity of pristine and aged PET MPs, using pharmaceutical diclofenac (DCF) as a model organic pollutant. An ecotoxicity assessment of such samples was performed. Characterization of the PET samples (bottles and films) was carried out to detect the thermooxidative aging effects. The influence of the temperature and MP dosage on the extent of adsorption of DCF was elucidated by employing an empirical modeling approach using the response surface methodology (RSM). Aquatic toxicity was investigated by examining the green microalgae Pseudokirchneriella subcapitata. It was found that the thermooxidative ageing process resulted in mild surface changes in PET MPs, which were reflected in changes in hydrophobicity, the amount of amorphous phase, and the particle size distribution. The fractions of the particle size distribution in the range 100-500 µm for aged PET are higher due to the increase in amorphous phase. The proposed mechanisms of interactions between DCF and PET MPs are hydrophobic and π-π interactions as well as hydrogen bonding. RSM revealed that the adsorption favors low temperatures and low dosages of MP. The combination of MPs and DCF exhibited higher toxicity than the individual components.

Biomass Pyrolysis-Derived Biochar: A Versatile Precursor for Graphene Synthesis.

Graphene, a two-dimensional carbon allotrope with a honeycomb structure, has emerged as a material of immense interest in diverse scientific and technical domains. It is mainly produced from graphite by mechanical, chemical and electrochemical exfoliation. As renewable energy and source utilization increase, including bioenergy from forest and woody residues, processed, among other methods, by pyrolysis treatment, it can be expected that biochar production will increase too. Thus, its useful applications, particularly in obtaining high-added-value products, need to be fully explored. This study aims at presenting a comprehensive analysis derived from experimental data, offering insights into the potential of biomass pyrolysis-derived biochar as a versatile precursor for the controlled synthesis of graphene and its derivatives. This approach comprehended the highest energy output and lowest negative environmental footprint, including the minimization of both toxic gas emissions during processing and heavy metals' presence in the feedstock, toward obtaining biochar suitable to be modified, employing the Hummers and intercalation with persulfate salts methods, aiming at deriving graphene-like materials. Material characterization has revealed that besides morphology and structural features of the original wooden biomass, graphitized structures are present as well, which is proven clearly by Raman and XPS analyses. Electrochemical tests revealed higher conductivity in modified samples, implying their graphene-like nature.

Visible-Light Activation of Persulfate or H2O2 by Fe2O3/TiO2 Immobilized on Glass Support for Photocatalytic Removal of Amoxicillin: Mechanism, Transformation Products, and Toxicity Assessment.

Fe2O3/TiO2 nanocomposites were fabricated via a facile impregnation/calcination technique employing different amounts iron (III) nitrate onto commercial TiO2 (P25 Aeroxide). The as-prepared Fe2O3/TiO2 nanocomposites were characterized by X-ray diffraction (XRD), Raman spectroscopy (RS), scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDXS), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller analysis (BET), electron impedance spectroscopy (EIS), photoluminescence spectroscopy (PL), and diffuse reflectance spectroscopy (DRS). As a result, 5% (w/w) Fe2O3/TiO2 achieved the highest photocatalytic activity in the slurry system and was successfully immobilized on glass support. Photocatalytic activity under visible-light irradiation was assessed by treating pharmaceutical amoxicillin (AMX) in the presence and absence of additional oxidants: hydrogen peroxide (H2O2) and persulfate salts (PS). The influence of pH and PS concentration on AMX conversion rate was established by means of statistical planning and response surface modeling. Results revealed optimum conditions of [S2O82-] = 1.873 mM and pH = 4.808; these were also utilized in presence of H2O2 instead of PS in long-term tests. The fastest AMX conversion possessing a zero-order rate constant of 1.51 × 10-7 M·min-1 was achieved with the photocatalysis + PS system. The AMX conversion pathway was established, and the evolution/conversion of formed intermediates was correlated with the changes in toxicity toward Vibrio fischeri. Reactive oxygen species (ROS) scavenging was also utilized to investigate the AMX conversion mechanism, revealing the major contribution of photogenerated h+ in all processes.

Environmental aspects of UV-C-based processes for the treatment of oxytetracycline in water.

This study is focused on oxytetracycline (OTC) degradation by direct photolysis (UV-C) and photobased advanced oxidation processes (AOPs) (UV-C/H2O2 and UV-C/S2O82-). OTC degradation pathways were revealed by LC-MS/MS and GC-MS/MS analyses. The evolution/degradation profiles of 12 detected byproducts were correlated with changes in biodegradability and toxicity toward Vibrio fischeri recorded during the treatment. Both photobased AOPs yielded higher OTC degradation and mineralization rates than direct photolysis. The OTC degradation pathway was found to be rather specific regarding the main reactive species (HO• or SO4•-)/mechanism, yielding different patterns in toxicity changes, while biodegradability profiles were less affected. Biodegradability was correlated with the observed degradation and mineralization kinetics. The recorded toxicity changes indicate that byproducts formed by initial OTC degradation are more toxic than the parent pollutant. The prolonged treatment resulted in the formation of byproducts that contributed to a decrease in toxicity and an increase in biodegradability, as particularly emphasized in the case of UV-C/S2O82-.

One-Pot Synthesis of Sulfur-Doped TiO2/Reduced Graphene Oxide Composite (S-TiO2/rGO) With Improved Photocatalytic Activity for the Removal of Diclofenac From Water.

Sulfur-doped TiO2 (S-TiO2) composites with reduced graphene oxide (rGO), wt. % of rGO equal to 0.5%, 2.75%, and 5.0%, were prepared by a one-pot solvothermal procedure. The aim was to improve photocatalytic performance in comparison to TiO2 under simulated solar irradiation for the treatment of diclofenac (DCF) in aqueous medium. The obtained composites were characterized for physical-chemical properties using thermogravimetric analysis (TGA), X-ray diffractograms (XRD), Raman, scanning electron microscopy (SEM)/energy dispersive X-ray (EDX), Brauner Emmett Teller (BET), and photoluminescence (PL) analyses, indicating successful sulfur doping and inclusion of rGO. Sulfur doping and rGO have successfully led to a decrease in photogenerated charge recombination. However, both antagonistic and synergistic effects toward DCF treatment were observed, with the latter being brought forward by higher wt.% rGO. The composite with 5.0 wt.% rGO has shown the highest DCF conversion at pH 4 compared to that obtained by pristine TiO2, despite lower DCF adsorption during the initial dark period. The expected positive effects of both sulfur doping and rGO on charge recombination were found to be limited because of the subpar interphase contact with the composite and incomplete reduction of the GO precursor. Consequent unfavorable interactions between rGO and DCF negatively influenced the activity of the studied S-TiO2/rGO photocatalyst under simulated solar irradiation.

Key structural features promoting radical driven degradation of emerging contaminants in water.

Diverse contaminants of emerging concern (CECs) can be found in nowadays aquatic environment, possessing high potential to cause adverse ecological and human health effects. Due to their recalcitrance, conventional water treatment methods are shown to be inadequately effective. Thus, their upgrade by advanced oxidation processes, involving the generation of highly reactive species (HO and SO4-), is highly demanded. In order to assess the susceptibility of CECs by HO and SO4-, as well as to determine the corresponding reaction rate constants kHO and kSO4-, the complex experimental studies has to be maintained. The alternative is the application of modeling approaches which correlate structural characteristics with activities/properties of interest, i.e. quantitative structure activity/property relationship (QSAR/QSPR). In this study kHO and kSO4- of fifteen selected CECs were determined by competitive kinetics, and afterward used to elucidate key structural features promoting their degradation. In that purpose, QSPR models were constructed using multiple linear regression (MLR) combined with genetic algorithm (GA) approach. The models were submitted to the internal and external validation (using additional set of 17 CECs). Selected 3-variable models predicting kHO and kSO4- were characterized with high accuracy and predictivity (R2 = 0.876 and Q2 = 0.847 and R2 = 0.832 and Q2 = 0.778, respectively). Although selected models at the first sight include descriptors derived through complicated calculation procedures, their weighting schemes indicate on their relevance and transparency toward established reaction theories and differences regarding radical type.

Elucidating the Photocatalytic Behavior of TiO2-SnS2 Composites Based on Their Energy Band Structure.

TiO2-SnS2 composite semiconducting photocatalysts with different building component ratios were prepared by hydrothermal synthesis (TiO2-SnS2-HT) and by immobilization of commercial TiO2 and SnS2 particles (TiO2-SnS2-COMM). The band gap values, which determine the catalysts’ photoactivity, were examined by diffuse reflectance spectroscopy and Kubelka⁻Munk transformations. The catalysts’ surface properties: specific surface area, charge and adsorption capacitance at the solid⁻solution interface were characterized using BET analysis, potentiometric titration and electrochemical impedance spectroscopy, respectively. The electronic band structure of TiO2-SnS2 photocatalyst, as the key property for the solar-driven photocatalysis, was deduced from the thermodynamic data and the semiconducting parameters (type of semiconductivity, concentration of the charge carriers, flat band potential) obtained by Mott⁻Schottky analysis. The photoactivity of both composites was studied in photocatalytic treatment of diclofenac (DCF) under simulated solar irradiation and was compared to the benchmark photocatalyst (TiO2 P25) activity. The influence of process parameters, such as pH, H2O2, and composite formulation on the effectiveness of DCF removal and conversion was investigated and discussed by employing response surface modeling (RSM) approach. The photocatalytic efficiency of both composite materials was discussed on the basis of the hetereojunction formation that facilitated the photoelectron transfer, promoting more efficient photocatalytic degradation of DCF.

UV photolysis of diclofenac in water; kinetics, degradation pathway and environmental aspects.

In this study, the photolysis behavior of commonly used anti-inflammatory drug diclofenac (DCF) was investigated using UV-C and UV-A irradiation. In that purpose, DCF conversion kinetics, mineralization of organic content, biodegradability, and toxicity were monitored and compared. The results showed different kinetics of DCF conversion regarding the type of UV source applied. However, in both cases, the mineralization extent reached upon complete DCF conversion is rather low (≤10 %), suggesting that the majority of DCF was transformed into by-products. Formation/degradation of main degradation by-products was monitored using high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry (HPLC-ESI-MS/MS), whereas different profiles were obtained by UV-C and UV-A photolysis. The results of bioassays revealed that biodegradability of DCF solutions remained low through the applied treatments. The toxicity of irradiated DCF solutions was evaluated using Vibrio fischeri. A significant reduction of toxicity, especially in the case of UV-A radiation, was observed upon complete degradation of DCF. In addition to toxicity reduction, calculated Log K OW values of DCF degradation by-products indicate their low potential for bioaccumulation (Log K OW ≤ 3) in comparison to the parent substance.

Photooxidation of benzene-structured compounds: influence of substituent type on degradation kinetic and sum water parameters.

The combined influence of substituent type and UV/H(2)O(2) process parameters on the degradation of four aromatic water pollutants was investigated using modified 3(3) full factorial design and response surface methodology. Degradation kinetics was described by the quadratic polynomial model. According to the applied ANOVA, besides pH and [H(2)O(2)], model terms related with the pollutant structure are found to be significant. Different optimal operating conditions and values of observed degradation rate constants were determined for each of the pollutants indicating that the type of substituent influences the overall process effectiveness over structurally defined degradation pathway. Biodegradability (BOD(5)/COD) and toxicity (TU) were evaluated prior to the treatment and at the reference time intervals t(1/2)(P), t(3/4)(P), t(1/4)(OC) and t(1/2)(OC) corresponding to the real time required to reduce the concentration of parent pollutant and organic content for 1/2, 3/4, 1/4 and 1/2 of initial amount. The observed differences are correlated to the structural differences of studied aromatics.