Microplastics can affect soil properties and chemical speciation of metals in yellow-brown soil.

Although the influence of microplastics (MPs) in different soil environments has been investigated, their effects on the physiochemical properties and chemical speciation of heavy metals in yellow-brown soil remains unknown. This study aimed to determine the effects of various concentrations of linear low-density polyethylene (LLDPE), polyamide (PA), polyurethane (PU), polystyrene (PS), and low-density polyethylene (LDPE) MPs on the yellow-brown soil environment and chemical speciation of the heavy metals cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn). MPs influenced the physicochemical properties and chemical speciation of heavy metals in yellow-brown soil. The physicochemical properties of yellow-brown soil can be altered by changing the concentrations of LDPE MP. The relationship between changes in field capacity (FC) and LDPE concentrations was approximately linear. The physiochemical properties of yellow-brown soil containing added PA, PU, and LDPE MPs were substantially improved (control vs. MPs): FC, 39 % vs. 42.50 % for PU, cation exchange capacity (CEC) 45.77, 56.65, and 57.44 cmol.kg-1 for PA, PU, and LDPE respectively, and organic matter (OM) content, 40.16 vs. 51.68 g.kg-1 for PA. The LLDPE and PU MPs also simultaneously affected the chemical speciation of heavy metals in yellow-brown soil. The LLDPE MPs increased the acid-soluble (45.17-54.67 % (Cd-F1), 7.24-11.30 % (Cu-F1), 4.20-7.23 % (Pb-F1), 21.21-31.47 % (Zn-F1)) and reducible (24.02-29.41 % (Cd-F2), 25.69-34.95 % (Cu-F2), 74.29-81.07 % (Pb-F2), 28.77-34.19 % (Zn-F2)) fractions of heavy metals, which increased their bioavailability. However, PU MPs reduced the ecological risk of heavy metals in yellow-brown soil by increasing the content of the residual fraction (26.11-40.21 % (Cd-F4), 47.63-59.67 % (Cu-F4), 17.25-26.76 % (Pb-F4), 32.63-50.46 % (Zn-F4)). Changes in the properties of yellow-brown soil and the impact of MPs on heavy metals, might change the chemical speciation of heavy metals. The impact of MPs on heavy metals in yellow-brown soil requires further investigation.

Inversion of Lake Bathymetry through Integrating Multi-Temporal Landsat and ICESat Imagery.

Lake bathymetry provides valuable information for lake basin planning and treatment, lake watershed erosion and siltation management, water resource planning, and environmental protection. Lake bathymetry has been surveyed with sounding techniques, including single-beam and multi-beam sonar sounding, and unmanned ship sounding. Although these techniques have high accuracy, most of them require long survey cycles and entail a high degree of difficulty. On the contrary, optical remote sensing inversion methods are easy to implement, but tend to provide less accurate bathymetry measures, especially when applied to turbid waters. The present study, therefore, aims to improve the accuracy of bathymetry measurements through integrating Landsat Thematic Mapper imagery, the Ice, Cloud, and Land Elevation Satellite's Geoscience Laser Altimeter System (ICESat/GLAS) data, and water level data measured at hydrological stations. First, the boundaries of a lake at multiple dates were derived using water extraction, initial boundary extraction, and Landsat Thematic Mapper/Enhanced Thematic Mapper (TM/ETM+) strip removal processing techniques. Second, ICESat/GLAS data were introduced to obtain additional topographic information of a lake. The striped topography of a lake's area was then obtained through eliminating and correcting erroneous points and interpolating the values of unknown points. Third, the entire bathymetry of the lake was obtained through interpolating water level values of lake boundary points in various dates. Experiments show that accurate bathymetry (±1 m) can be successfully derived.

Are microplastics in livestock and poultry manure an emerging threat to agricultural soil safety?

Microplastics (MPs) have attracted much attention in recent years, due to the difficulty of degradation and threats to ecological systems and humans. Based on the analysis of 1429 articles on MPs in soil, we found that we know little about the behavior and fate of manure-born MPs from the livestock and poultry production systems to agriculture soils. This review summarizes the analytical methods for sampling, separation, and identification and the occurrence of MPs in livestock and poultry manure, mainly based on 7 surveys related to manure-born MPs. Then, the sources, fate, and environmental risks of MPs in livestock and poultry manure are discussed. MPs, heavy metals, pathogens, antibiotic resistance genes, and persistent organic pollutants are common pollutants in livestock and poultry manure. Worse, manure-born MPs will become smaller, rougher, and more numerous and could easily form more toxic compound pollution after complicated processes of manure treatment, which seriously threatens agricultural soil safety. Finally, an outlook is offered for future research. We hope this article to attract attention to the risks of MPs in livestock and poultry manure and provide a reference for future research.

Microplastics removal and characteristics of a typical multi-combination and multi-stage constructed wetlands wastewater treatment plant in Changsha, China.

Wastewater treatment plants (WWTPs) are an important source of microplastics (MPs) entering the aquatic environment. As environmental awareness increases, WWTPs are gradually using constructed wetlands (CWs) in the depth treatment stage. There were few studies related to MPs removal efficiency of CWs, especially in multi-stage and multi-combinations CWs. Therefore, we studied MPs characteristics and removal in a typical CWs WWTP in Changsha, comparing the MPs removal efficiencies of different processes in a WWTP, focusing on the MPs abundance variation in different stages CWs. Result showed that the MPs removal efficiency of Phase Ⅰ was 87.72% and that of Phase II was 80.65%. Approximate estimates showed that the daily discharge of MPs reached 7.20 * 108 items. The MPs removal efficiency of vertical flow CWs was 25.71%. The MPs removal efficiencies of secondary and tertiary horizontal subsurface flow CWs (HSSFCWs) were 32.00% and 21.43%. The MPs removal efficiencies of secondary and tertiary surface flow CWs were 23.53% and 12.50%. The MPs removal efficiencies of three bio-ponds were -23.08%, -12.90%, and -27.27%. Combined system of bio-pond + CWs reduced the MPs removal efficiency. The most dominant shape of MPs in wastewater was fibers. The most common MPs were polyethylene and polystyrene. The primary treatment in the Changsha WWTP had the highest MPs removal efficiency. Results of this investigation showed the multi-combination and multi-stage CWs WWTP can remove most of MPs in influent, which greatly reduced the amount of MPs discharged into the aquatic environment through WWTP and provided data for analyzing the distribution of MPs in the aquatic environment.

A Review on Microorganisms in Constructed Wetlands for Typical Pollutant Removal: Species, Function, and Diversity.

Constructed wetlands (CWs) have been proven as a reliable alternative to traditional wastewater treatment technologies. Microorganisms in CWs, as an important component, play a key role in processes such as pollutant degradation and nutrient transformation. Therefore, an in-depth analysis of the community structure and diversity of microorganisms, especially for functional microorganisms, in CWs is important to understand its performance patterns and explore optimized strategies. With advances in molecular biotechnology, it is now possible to analyze and study microbial communities and species composition in complex environments. This review performed bibliometric analysis of microbial studies in CWs to evaluate research trends and identify the most studied pollutants. On this basis, the main functional microorganisms of CWs involved in the removal of these pollutants are summarized, and the effects of these pollutants on microbial diversity are investigated. The result showed that the main phylum involved in functional microorganisms in CWs include Proteobacteria, Bacteroidetes, Actinobacteria and Firmicutes. These functional microorganisms can remove pollutants from CWs by catalyzing chemical reactions, biodegradation, biosorption, and supporting plant growth, etc. Regarding microbial alpha diversity, heavy metals and high concentrations of nitrogen and phosphorus significantly reduce microbial richness and diversity, whereas antibiotics can cause large fluctuations in alpha diversity. Overall, this review can provide new ideas and directions for the research of microorganisms in CWs.

Enhanced removal of heavy metals and metalloids by constructed wetlands: A review of approaches and mechanisms.

Constructed wetlands (CWs) are increasingly employed to remediate heavy metal and metalloid (HMM)-polluted water. However, the disadvantages of HMM removal by conventional CWs (without enhancement), such as an unstable and unpredictable removal efficiency, hinder the reliability of this technology. The objective of this study was to review research on enhanced CWs for HMM removal. In particular, we performed a bibliometric analysis to evaluate research trends, critical literature, and keyword evolution in recent years. Subsequently, we reviewed various enhanced approaches for the application of CWs for the removal of HMMs, including the use of improved substrates, aquatic macrophytes, microorganisms, bioelectrochemical coupling systems, hybrid CW, external additives, and operation parameters. Furthermore, the main mechanisms underlying HMM removal by these approaches are summarized. Our review clearly reveals that research on the remediation of HMM-polluted water via CW technology is receiving increased attention, with no apparent trends in topics. The selection of appropriate enhanced approaches or operation parameters as well as methodological improvements should be based on the dominant environmental conditions of the CW column and removal mechanisms for the targeted HMMs. Based on the established literature, several suggestions are proposed to guide the optimization of the design and operation of efficient CWs for the treatment of HMM-polluted water.

Microplastics removal and characteristics of constructed wetlands WWTPs in rural area of Changsha, China: A different situation from urban WWTPs.

Wastewater treatment plants (WWTPs) are important pathways that discharged microplastics into the natural environment, but few relevant research has been conducted in rural areas, especially with horizontal subsurface flow constructed wetlands (HSSFCWs). This study systematically investigates the removal efficiency and characteristics of microplastics in two rural WWTPs with HSSFCW in Changsha city of China and compared the microplastic pollution data of urban and rural WWTPs, to provide some advice for improving the microplastics removal efficiencies in rural WWTPs. 3 L wastewater were collected at each sampling point. Then microplastics in wastewater were extracted by density separation. The size, shape, color, and type of microplastics were analyzed and identified using the integrated microscope and FTIR. The whole experiment was carried out about a month. The results showed that the microplastics removal efficiency of rural WWTP1 was 72.38%, and that of rural WWTP2 was 68.10%, which were lower than that of most urban WWTPs. The microplastics removal efficiency of constructed wetlands in rural WWTP1 was 26.59%, and that in rural WWTP2 was 10.61%. Based on the daily discharge volume and the abundance of microplastics in the effluent of WWTPs, approximately 1.45 ∗ 107 items and 1.73 ∗ 107 items of microplastics were released each day from two rural WWTPs, separately. Fiber was the primary microplastic in both influent and effluent. The polyethylene (PE) and polystyrene (PS) were the main ingredients. The primary source of microplastics in rural WWTPs was inferred as domestic sewage. Microplastics removal efficiencies of rural WWTPs can be improved by regular maintenance, reducing the grid spacing, increasing the hydraulic stay time of biochemical pool, and increasing plant density, changing plant species, or adjusting the size and fill order of matrix in HSSFCWs, which can effectively help to prevent secondary pollution of microplastics from rural WWTPs.

Organophosphate Esters in China: Fate, Occurrence, and Human Exposure.

Organophosphate esters (OPEs) are widely used as flame retardants and plasticizers. OPEs have been released into various environments (e.g., water, sediments, dust and air, and soil). To investigate the occurrence and distribution of OPEs in various environments in China, this review collects and discusses the published scientific studies in this field. Chlorinated OPEs, as flame retardants, are the predominant OPEs found in the environment. The analysis of data revealed large concentration variations among microenvironments, including inflowing river water (range: 0.69-10.62 µgL-1), sediments (range: 0.0197-0.234 µg/g), dust (range: 8.706-34.872 µg/g), and open recycling sites' soil (range: 0.122-2.1 µg/g). Moreover, OPEs can be detected in the air and biota. We highlight the overall view regarding environmental levels of OPEs in different matrices as a starting point to monitor trends for China. The levels of OPEs in the water, sediment, dust, and air of China are still low. However, dust samples from electronic waste workshop sites were more contaminated. Human activities, pesticides, electronics, furniture, paint, plastics and textiles, and wastewater plants are the dominant sources of OPEs. Human exposure routes to OPEs mainly include dermal contact, dust ingestion, inhalation, and dietary intake. The low level of ecological risk and risk to human health indicated a limited threat from OPEs. Furthermore, current challenges and perspectives for future studies are prospected. A criteria inventory of OPEs reflecting the levels of OPEs contamination association among different microenvironments, emerging OPEs, and potential impact of OPEs on human health, particularly for children are needed in China for better investigation.

Comparison of the abundance of microplastics between rural and urban areas: A case study from East Dongting Lake.

There is a lack of research on microplastic pollution in freshwater areas. In this study, microplastic pollution in lakeshore sediments of East Dongting Lake was investigated. The abundance of microplastics ranged from 180 to 693 items/kg in the lakeshore sediment, which was moderate compared with other areas of the world. Fibers, transparent and small sized microplastics accounted for the largest proportion in terms of shape, color and size, respectively. Eight types of microplastics with different polymer compositions were identified by micro-Raman spectroscopy. The study found that the abundance of microplastics in the urban area sediment of Dongting Lake is lower than that of the rural area. The difference in environmental protection measures between urban and rural areas may be the cause of this phenomenon. The results of this study is helpful for understanding the role of human activities in microplastic pollution and provide valuable references for future research.

Microplastic Pollution in Surface Water of Urban Lakes in Changsha, China.

As emerging pollutants, microplastics have attracted the attention of scholars from all over the world. However, there is a lack of research on freshwater areas, even in densely populated urban areas. This study investigated eight urban lakes in Changsha, China. It was found that microplastic concentrations ranged from 2425 ± 247.5 items/m3 to 7050 ± 1060.66 items/m3 in the surface water of research areas and the maximum concentration was found in Yuejin Lake, a tourist spot in the center of the city. Anthropogenic factors are an important reason for microplastic abundance in urban lakes. The major shape of microplastics was linear and most of the microplastics were transparent. More than 89.5% of the microplastics had a size of less than 2 mm. Polypropylene was the dominant type in the studied waters. This study can provide a valuable reference for a better understanding of microplastic pollution in urban areas of China.

Microplastic pollution in the rivers of the Tibet Plateau.

The Tibet Plateau, the so-called Third Pole of the world, is home to the headstreams of many great rivers. The levels of microplastic pollution in those rivers, however, are unknown. In this study, surface water and sediment samples were collected from six sampling sites along five different rivers. The surface water and sediment samples were collected with a large flow sampler and a stainless steel shovel, respectively. The abundance of microplastics ranged from 483 to 967 items/m3 in the surface water and from 50 to 195 items/kg in the sediment. A large amount of small, fibrous, transparent microplastics were found in this study. Five types of microplastics with different chemical compositions were identified using micro-Raman spectroscopy: polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyamide (PA). These results demonstrate that rivers in the Tibet Plateau have been contaminated by microplastics, not only in developed areas with intense human activity but also in remote areas, where microplastic pollution requires further attention.

Microplastics in Sediment and Surface Water of West Dongting Lake and South Dongting Lake: Abundance, Source and Composition.

Microplastic pollution was investigated in sediment and surface water in West Dongting Lake and South Dongting Lake for the first time. The abundance of microplastics ranged from 616.67 to 2216.67 items/m³ and 716.67 to 2316.67 items/m³ in the lakeshore surface water of West Dongting Lake and South Dongting Lake, respectively. The highest levels of microplastic pollution were found in the lakes' outlets. In the lake center sites of the West Dongting Lake and South Dongting Lake, the abundance of microplastics ranged from 433.33 to 1500 items/m³ and 366.67 to 1566.67 items/m³, respectively. Meanwhile, the study found that in lakeshore sediment of West Dongting Lake and South Dongting Lake, microplastic concentrations ranged from 320 to 480 items/m³ and 200⁻1150 items/m³. Polystyrene (PS) and polyethylene terephthalate (PET) were most common in the surface water and sediment samples, respectively. In addition, we suggest that the effects of polymer types in microplastics should be taken into account when considering abundance. This study can provide valuable points of reference to better understanding microplastic pollution in inland freshwater areas.

Chlorine inactivation of Tubifex tubifex in drinking water and the synergistic effect of sequential inactivation with UV irradiation and chlorine.

The inactivation of Tubifex tubifex is important to prevent contamination of drinking water. Chlorine is a widely-used disinfectant and the key factor in the inactivation of T. tubifex. This study investigated the inactivation kinetics of chlorine on T. tubifex and the synergistic effect of the sequential use of chlorine and UV irradiation. The experimental results indicated that the Ct (concentration × timereaction) concept could be used to evaluate the inactivation kinetics of T. tubifex with chlorine, thus allowing for the use of a simpler Ct approach for the assessment of T. tubifex chlorine inactivation requirements. The inactivation kinetics of T. tubifex by chlorine was found to be well-fitted to a delayed pseudo first-order Chick-Watson expression. Sequential experiments revealed that UV irradiation and chlorine worked synergistically to effectively inactivate T. tubifex as a result of the decreased activation energy, Ea, induced by primary UV irradiation. Furthermore, the inactivation effectiveness of T. tubifex by chlorine was found to be affected by several drinking water quality parameters including pH, turbidity, and chemical oxygen demand with potassium permanganate (CODMn) concentration. High pH exhibited pronounced inactivation effectiveness and the decrease in turbidity and CODMn concentrations contributed to the inactivation of T. tubifex.