Simultaneous Fat Injection for Nasal Contouring in Orthognathic Patients.

BACKGROUND: Augmentation rhinoplasty with autologous fat grafting is a useful procedure to meet the demand for facial harmonization in the Asian population. We used this procedure during orthognathic surgery to address inadequate dorsum projection. This prospective study was conducted to determine the fat retention rate in patients undergoing simultaneous autologous fat injection augmentation rhinoplasty and orthognathic surgery. METHODS: Nineteen patients were treated with simultaneous bimaxillary orthognathic surgery and autologous fat grafting of the nasal dorsum and tip. The paired t test was used to compare the nasal volumes before and at least 6 months after surgery measured by 3-dimensional computer tomography scans. All measurements were performed twice by the same evaluator at least 2 weeks apart for intrarater consistency. RESULTS: Seventeen patients completed the study. The volume means before and after surgery were 22.3 ± 4.6 cm3 and 23.3 ± 4.7 cm3, respectively, with a mean difference of 1.0 ± 0.3 cm3 (P < .001). The mean retention rate was calculated to be 50.5% ± 7.0% (range: 40.5%-64.7%). Intrarater consistency was high with a Cronbach α of .97 (P < .001) and .98 (P < .001), respectively. CONCLUSION: This prospective study provides objective graft retention measurements for fat injection augmentation rhinoplasty combined with orthognathic surgery. All patients were satisfied with the results and no complications or additional morbidity was noted in the postoperative course. We consider this procedure to be a safe, reliable, and powerful adjunct to improve the aesthetic results of orthognathic surgery.

Technical Aspects of High-Resolution Color-Coded Duplex Sonography for the Design of Perforator Flaps.

BACKGROUND: Technical aspects are of utmost significance for an efficient execution in designing perforator flaps with high-resolution color-coded Duplex sonography (CCDS). The following study evaluates decisive factors for a successful microvessel examination conducted by the microsurgeon. METHODS: Technical knowledge presented in this study was based on a series of more than 200 perforator flaps planned with CCDS. Flap reconstructions were performed at the University Hospital Regensburg, Germany, from July 2013 to January 2021. Standard high-resolution ultrasound (US) devices with linear multifrequency transducers of 4 to 18 MHz were used. Modes and device settings were evaluated regarding applicability by microsurgeons. Key steps for safe perforator identification and further optional steps for additional assessment should be discriminated. RESULTS: Different US modes including brightness mode (B-mode), color flow (CF), power Doppler (PD), pulse wave (PW), and blood flow (B-Flow) were used. Transducers from 15 MHz and up were favorable to detect microvessels. Knobology of a standard US device regarding buttons, switches, and specific onscreen options with relevance for perforator mapping was subcategorized in four different groups. For qualitative and quantitative evaluation of microvessels, different US modes were tested with respect to their usefulness.Vital elements of the CCDS exam are disaggregated into three key steps for safe perforator identification and three optional steps for further perforator characterization. A standardized protocol for the CCDS exams was applied. Downregulation of pulse-repetition frequency/scale to adapt device sensitivity to slow-flow velocities represented the most important criterion to visualize microvessels.Qualitative microvessel evaluation was performed in B-mode, CCDS, PD mode, and B-Flow mode. Quantitative assessment was executed using PW-mode and CCDS measuring the microvessels' diameter (mm) and flow characteristics. Quantitative information may be obtained using PW-mode and the distance-measuring tool in CF-mode. CONCLUSION: Technical aspects with respect to proper device trimming and application decisively impact CCDS-guided perforator vessel identification and evaluation.

Diced Cartilage Rhinoplasty for Cleft Nose Deformities: Determining the Flexibility of the Cartilage Framework.

BACKGROUND: The objective of this trial is to evaluate the flexibility of the cartilaginous component of the cleft nose after diced cartilage rhinoplasty by determining the degree of possible bending in relation to the vertical nasal dorsum axis and to compare with to a control group of the unaffected population. PATIENTS AND METHODS: Fifteen cleft nose patients with diced cartilage rhinoplasty were included in this study, as well as a control group of 15 unaffected individuals. The angle of maximum nasal bending is measured between the basic and maximum bending axis and performed by the same rater twice at least 2 weeks apart to account for intrarater reliability. Study groups were compared with Fisher and independent t test. RESULTS: The maximum bending to the left side was 16.10 ± 5.03 degrees for the study group and 23.95 ± 6.54 degrees for the control group (P = 0.001). The maximum bending to the right side were 16.54 ± 6.73 degrees for the study group and 23.00 ± 8.88 degrees for the control group (P = 0.034). CONCLUSION: Diced cartilage graft injection for dorsal augmentation yields reproducible and esthetically pleasing outcomes with good flexibility and natural feel of the nasal tip. Although there is a significant difference compared with a nonaffected control group in maximum bending capacity, all patients in this study were satisfied with the results.

NAM-help or burden? Intercultural evaluation of parental stress caused by nasoalveolar molding: a retrospective multi-center study.

OBJECTIVES: Nasoalveolar molding (NAM) was developed to facilitate easier treatment and better outcomes for cleft lip and palate (CLP) patients. The aim of this study was to investigate the parental burden and possible intercultural differences of this treatment modality, which is often argued to burden parents to an extraordinary amount. MATERIALS AND METHODS: Standardized questionnaires (available in English, Mandarin, and German) with 15 non-specific and 14 NAM-specific items to be retrospectively answered by Likert scales by parents of unilateral CLP patients with completed NAM treatment. RESULTS: The parents of 117 patients from two treatment centers in Taiwan and Germany were included. A very high level of overall satisfaction was found in both countries with significant intercultural differences in prenatal parent information, feeding problems, dealing with 3rd party's perception, and experienced personal effort. CONCLUSION: NAM is an effective treatment tool for children's CLP deformities and their caregivers in overcoming the feeling of helplessness. Intercultural differences may be due to infrastructural reasons, cultural attitudes and habits, or different public medical education. CLINICAL RELEVANCE: In addition to facilitating easier surgical treatment, NAM can be seen as a powerful coping strategy for parents dealing with a CLP deformity of their child and does not seem to burden them extraordinarily.

High-Resolution Ultrasound-Guided Perforator Mapping and Characterization by the Microsurgeon in Lower Limb Reconstruction.

BACKGROUND: Preoperative ultrasound (US)-guided perforator mapping has immensely simplified perforator flap planning. It may be executed by the microsurgeon. Device settings and selection of ultrasound modes are of utmost significance for detection of low-flow microvessels. The following study evaluates different US modes. METHODS: A prospective complete data acquisition was performed from July 2018 to June 2019 in a subset of patients who underwent US-guided flap planning. Multifrequency linear transducers were used applying five US modes. Brightness (B)-mode, color flow (CF), power Doppler (PD), pulse wave (PW), and B-flow modes were evaluated regarding applicability by microsurgeons. Peak systolic velocity (PSV), end diastolic velocity (EDV), and resistance index (RI) were chosen to evaluate flow characteristics. US results were correlated to intraoperative findings. RESULTS: A total number of eight patients (six males and two females) undergoing anterolateral thigh (ALT) or superficial circumflex iliac artery perforator (SCIP) flap surgery received an extensive standardized US-guided perforator characterization. Qualitative evaluation was performed in B-mode, color-coded duplex sonography (CCDS), PD, and B-flow mode. Quantitative assessment was executed using PW-mode and CCDS measuring the microvessels' diameter (mm) and flow characteristics (PSV, EDV, and RI). CCDS provided a mean diameter of 1.93 mm (range: 1.2-2.8 ± 0.51), a mean systolic peak of 16.9 cm/s (range: 9.9-33.4 ± 7.79), and mean RI of 0.71 (range: 0.55-0.87 ± 0.09) for lower limb perforators. All perforators located with US were verified by intraoperative findings. An optimized, time-effective US mapping algorithm was derived. Qualitative parameters may be evaluated with B-mode, CF, or B-flow. Smallest microvessels may be assessed in PD-mode. Lowering pulse-repetition frequency (PRF)/scale is mandatory to image low-flow microvessels as perforators. Quantitative information may be obtained using PW-mode and the distance-measuring tool in CF-mode. Image and video materials are provided. CONCLUSION: CCDS proved to be a powerful tool for preoperative perforator characterization when using a structured approach and mapping algorithm. Different techniques may be applied for specific visualizations and performed by the microsurgeon.

Feasibility study of preoperative microvessel evaluation and characterization in perforator flaps using various modes of color-coded duplex sonography (CCDS).

BACKGROUND: Color-coded duplex sonography (CCDS) is useful for perforator flap design showing the highest sensitivity in identifying microvessels. This prospective study evaluates the feasibility of different ultrasound (US) modes applied by the microsurgeon in daily practice suggesting quantifiable reference values. METHODS: Twenty-four patients aged between 17 and 68 years (mean 43.3 ± 14.2 years) with 18 anterolateral thigh (ALT) and 6 superficial circumflex iliac artery (SCIP) flaps were included. Indications were traumatic (n = 12), infectious (n = 6), ischemic (n = 4), or tumor-associated defects (n = 2). Different US modes were evaluated regarding applicability using multifrequency linear probes (5-15 MHz). Vessels diameter, peak systolic velocity (PSV), end diastolic velocity (EDV), and resistance index (RI) were measured. Preoperative results were correlated to intraoperative findings. RESULTS: In the examined patient group with 24 perforator flaps a 100% correlation was seen when comparing perforators detected with CCDS/PD with intraoperative findings using optimized US settings. Sensitivity, PPV, and accuracy of CCDS were 100% respectively. Mean PSV of 16.99 ± 6.07 cm/s, mean EDV of 5.01 ± 1.84 cm/s and RI of 0.7 ± 0.07 were measured in microvessels (PW-mode). CCDS proved to be superior compared to PD in correct diameter assessment showing a mean diameter of 1.65 ± 0.45 mm, compared to PD-mode 1.31 ± 0.24 mm. Mean PSV and EDV were higher in ALT than in SCIP flaps, RI was slightly higher in SCIP flaps (p > .05). There were no significant differences in size of different flaps' perforators (p > .05). CONCLUSION: CCDS represents a highly valuable tool in the daily practice of free flap reconstructions using optimized low flow US settings and multifrequency linear probes.

Impact of Smoking Status in Free Deep Inferior Epigastric Artery Perforator Flap Breast Reconstruction: A Multicenter Study.

BACKGROUND: Several patient-related factors have been identified with regard to the safety and efficacy of breast reconstructions. Using the largest database available in Europe, the presented study investigated the impact of cigarette smoking on deep inferior epigastric artery perforator (DIEP) free-flap breast reconstructions. METHODS: In total, 3,926 female patients underwent 4,577 free DIEP-flap breast reconstructions after malignancies in 22 different German breast cancer centers. The cases were divided into two groups: nonsmokers (NS) and smokers (S). Impact of smoking on surgical complications, controlled for covariates, and cluster effects within the cancer centers were analyzed by using generalized linear mixed models. RESULTS: Overall, there was no significant difference between the groups of patients regarding the rate of total flap loss. However, the rate of partial flap loss (0.9 vs. 3.2%, p < 0.001) and wound-healing disturbances requiring revision surgery (donor site: 1.5 vs. 4.0; recipient site: 1.3 vs. 3.6%, both p < 0.001) was significantly higher in smokers. Multivariable analysis identified smoking to be an independent risk factor for revision surgery (p = 0.001) and partial flap loss (p < 0.0001). CONCLUSION: Our findings suggest that successful free tissue transfer can be achieved in smokers despite higher rates of partial flap losses and wound-healing disturbances. However, patients with a history of smoking requiring DIEP flap reconstruction should be critically evaluated preoperatively, informed in detail about the higher risk of complications and encouraged to quit smoking prior to surgery.

An Analysis of Aesthetic Refinements in 120 Secondary Cleft Rhinoplasties.

BACKGROUND: Secondary cleft nose rhinoplasty remains a challenging procedure. Cartilage memory and scar contraction are problematic factors. The need for more detailed procedures for secondary reconstruction in this patient population has arisen. Contemporary refinements demonstrate a highly structured approach. We conducted a retrospective study evaluating the aesthetic results of cleft patients who underwent secondary rhinoplasty. METHODS: In a retrospective study, a photometric analysis of cleft patients operated in the period 2003-2011 was conducted. Reconstructive methods were documented. Pre- and postoperative photographs of cleft rhinoplasty patients were evaluated using a standardized protocol. Nostril width ratio, columellar angle, tip projection ratio, and nasolabial angle served as objective instruments. The Unilateral Cleft Lip Surgical Outcomes Evaluation score was chosen for external photometric rating and rated blindly by 2 external individual plastic surgeons as independent nonbiased reviewers. The interrater and intrarater reliabilities were calculated using the Cohen kappa coefficient (κ). RESULTS: A total of 120 secondary rhinoplasties in 85 uni- and bilateral cleft patients could be included. Mean follow-up was 20 months. A total of 60 (71%) patients needed additional bone grafting (chin/pelvis), and 23 (27%) patients a LeFort I osteotomy. In one third of the secondary rhinoplasties, a medial and/or lateral osteotomy was performed (34%). In one fourth (24%), an external septoplasty was considered necessary. In 55% (47 patients) of the cases, a columellar strut was used. Excluding bone grafts, a total of 173 other grafts (mean of 2 grafts/patient) were applied. Postoperative measurements for nostril width ratio and columellar angle were statistically significant. A structured approach with contemporary refinements is described in detail. Intra- and interrater reliabilities for photometric assessment according to the Unilateral Cleft Lip Surgical Outcomes Evaluation score are shown. CONCLUSIONS: A structured approach for secondary cleft rhinoplasty yields satisfying, reproducible, and stable results.

Primary Repair in Patients With Unilateral Complete Cleft of Lip and Primary Palate: Assessment of Outcomes.

OBJECTIVE: Asymmetry of median facial structures is a major concern for patients with unilateral cleft lip and palate, and the principal goal of its treatment is to restore symmetry. Unilateral complete cleft of lip and primary palate (UCCLPP) is an uncommon subgroup and rarely reported. Patients with UCCLPP have protruding and deviating premaxilla, rendering a primary repair difficult. This study evaluated consecutive patients with UCCLPP and presented their treatment outcome. METHODS: We assessed 36 patients with UCCLPP and collected clinical information. Surgical repair was performed at 3 months of age by using a modified rotation-advancement method and primary nasal reconstruction. A single surgeon performed all surgical procedures. A postoperative nasal stent was used for 6 months. Follow-up standardized photographs were collected. Landmarks were identified, and nose and lip dimensions measured. The ratios of the corresponding parameters (cleft vs noncleft side) were obtained for evaluating nose and lip symmetry. RESULTS: No surgical complication was noted in any patient. The overall lip and nose outcome after the primary repair were adequate, and all ratios were close to 1. The nostril width was slightly wider on the cleft side, but the alar width and height were acceptable. The lip heights were balanced between the 2 sides. Patients who received presurgical nasoalveolar molding did not show more favorable lip and nose dimensions, except for the medial philtral height. CONCLUSION: Even in the presence of protruding and deviating premaxilla, our patients with UCCLPP obtained adequate lip and nose outcome after undergoing primary lip repair and nasal reconstruction.

3D printing in orthognathic surgery - A literature review.

With the recent advances in three-dimensional (3D) imaging, computer-assisted surgical planning and simulation are now regularly used for analysis of craniofacial structures and improved prediction of surgical outcomes in orthognathic surgery. A variety of patient-specific surgical guides and devices have been designed and manufactured using 3D printing technology, which rapidly gained widespread popularity to improve the outcomes. The article presents an overview of 3D printing technology for state-of-the-art application in orthognathic surgery and discusses the impacts on treatment feasibility and patient outcome. The current available literature regarding the use of 3D printing methods in orthognathic surgery including 3D computer-aided design/computer-aided manufacturing, rapid prototyping, additive manufacturing, 3D printing, 3D printed models, surgical occlusal splints, custom-made guides, templates and fixation plates is reviewed. A Medline, PubMed, ProQuest and ScienceDirect search was performed to find relevant articles over the past 10 years. A total of 318 articles were found, out of which 69 were publications addressing the topic of this study. An additional 9 hand-searched articles were added. From the review, we can conclude that the use of 3D printing methods in orthognathic surgery provide the benefit of optimal functional and aesthetic results, patient satisfaction, and precise translation of the treatment plan.

Establishment of a Reliable Horizontal Reference Plane for 3-Dimensional Facial Soft Tissue Evaluation Before and After Orthognathic Surgery.

BACKGROUND: This study aims to demonstrate the reliability of our proposed facial reference system in the horizontal axis using 3-dimensional photogrammetry and to find a correlation between this plane and the Frankfurt horizontal (FH) plane. METHODS: Forty-one patients were enrolled. Three-dimensional facial images were taken before and 6 months after orthognathic surgery. Superimposition was carried out, and differences in landmark position were evaluated. Two constant landmarks were selected to construct a reference system within a standardized reference frame. Cone-beam computed tomography and 3-dimensional facial images were superimposed. Two reference lines were identified, and the angle between these lines was calculated. RESULTS: For landmark reliability, 5 landmarks [gnathion, nasion, exocanthion (Ex), endocanthion, and tragion (T)] were constant. Two landmarks (Ex and T) were selected to construct a reference system within a standardized reference frame. For angular measurement, the mean angle between this reference plane and the skeletal FH plane was 17.6 ± 2.0 degrees. There was no statistical difference between sex, side, and preoperative/postoperative timing of photography. CONCLUSIONS: Our proposed reference plane is constructed from reliable facial Ex and T landmarks. This plane is consistent and crosses the FH plane at 17.6 degrees.

A Modified Technique of Mandibular Ramus Sagittal Split Osteotomy for Prevention of Inferior Alveolar Nerve Injury: A Prospective Cohort Study and Outcome Assessment.

BACKGROUND: Postoperative functional impairment of the inferior alveolar nerve (IAN) has been a common and well-recognized complication. Our study introduced a modified Obwegeser-Dal Pont bilateral sagittal split osteotomy (BSSO) technique and evaluated the subsequent incidence of postoperative neurosensory disturbance of IAN. METHODS: In this prospective cohort study, 57 patients receiving our modified BSSO during orthognathic surgery were enrolled. The technique contained opening the 2 ramus cortices and inserting the osteotome bypassing the IAN to avoid nerve injury. A 5-point scale self-assessment questionnaire was used to evaluate IAN neurosensory disturbance one week, six months and 12 months postoperatively. Differences between groups were analyzed using χ test for categorical and Wilcoxon signed-rank test for pairwise categorical data. RESULTS: Complete ramus splitting could be achieved in 109 (95.6%) sides. Lower lip or chin neurosensory disturbances presented in 72 (63.2%) sides 1 week postoperatively and gradually reduced to 9 (7.9%), and 4 (3.5%) at postoperative months 6 and 12, respectively. CONCLUSIONS: This BSSO technique could be safely performed with low rates of IAN exposure and injury and a low incidence of persistent neurosensory disturbance in 3.5% of patients 12 months postoperatively.

Primary Overcorrection of the Unilateral Cleft Nasal Deformity: Quantifying the Results.

BACKGROUND: Because primary nasal correction by the time of lip repair has been incorporated into the treatment approach, many patients have benefitted from this combined procedure. However, primary nasal correction cannot guarantee an excellent result. Although overcorrection has been mentioned as a treatment rationale of the unilateral cleft lip nasal deformity, a detailed approach and quantitative evidence of the rationale are rare. This study evaluates whether overcorrection in the primary repair results in a quantitative improvement in nasal appearance. PATIENTS AND METHODS: In this retrospective study, the inclusion criteria were patients with complete unilateral cleft lip and palate who underwent primary lip and nose repair by the age of 3 to 4 months. Primary nasal overcorrection was achieved by application of muscle to septal base suture, alar cinching suture and Tajima reversed U incision method. Patients were further divided into an overcorrected (n = 19) and nonovercorrected group (n = 19). The following parameters were identified on basilar photos of all patients taken at least 12 months after repair, ratios of cleft to noncleft side in each patient were taken and the mean for each parameter calculated: Ac angle (ACA/ACA'), alar height (AH/AH'), alar width (AW/AW'), nostril height (NH/NH`), nostril width (NW/NW'), and columellar deviation from the midline (CD/NW). The means of the overcorrected and nonovercorrected groups were then compared using the t test. RESULTS: From all investigated measuremens, Alar height (AH/AH': overcorrected, 0.983 to nonovercorrected, 0.941; P = 0.03) and nostril height ratio (NH/NH') (NH/NH': covercorrected, 0.897 to nonovercorrected, 0.680; P = 0.003) showed statistically significant differences favoring the overcorrected group at least 12 months after surgery. CONCLUSIONS: Primary nasal overcorrection including muscle to columella base suture, alar cinch suture, and Tajima method resulted in quantitatively more long-term symmetric alae and nostril height compared to nonovercorrected patients.

Complications following orthognathic surgery for patients with cleft lip/palate: A systematic review.

BACKGROUND/PURPOSE: The purpose of this systematic review is to update the available data for complications following orthognathic surgery in cleft lip and/or palate patients. METHODS: Three electronic databases (Medline, Embase, and Cochrane) were searched for publications from 1990 to 2014. RESULTS: A total of 26 articles were selected including 1003 patients (male: 391, female: 353, 259: not mentioned) who underwent maxillary osteotomies for cleft lip/palate. Mean age at surgery was 19.3 years (range: 8.5-60 years). Overall perioperative complications were reported in 126 cases (12.76%). The most common complication was closure failure of pre-existing palatal fistula (28.57%), followed by velopharyngeal impairment (16.79%), closure failure of pre-existing alveolar fistula (10.74%), gingival recession (4.55%), and failure of premaxilla stabilization in bilateral cases (4.55%). Severe vascular complications included one arteriovenous fistula (0.10%), one maxillary aneurysm (0.10%), and one cavernous sinus thrombosis (0.10%). Mean horizontal relapse rate was 17.9% (range: -20.0% to 37.2%), and mean vertical relapse rate was 35.4% (range: -25.9% to 162.5%). Reoperation rate was 12.2% (range: 0.0-64.0%). Prospective studies or randomized trials were rare. CONCLUSION: To obtain a dataset with higher evidence, a prospective multicenter study should be conducted with clearly defined criteria for each complication.

Three-Dimensional Analyses of Postoperative Effects of Surgically Assisted Rapid Palatal Expansion (SARPE) on the Soft Tissue of the Midface Region and the Upper Airway Space Using Stereophotogrammetry and Cone Beam Computed Tomography (CBCT).

BACKGROUND: Surgically assisted rapid palatal expansion (SARPE) is an established method to treat transverse maxillary hypoplasia in skeletally mature adult patients. SARPE affects the surrounding soft tissue. In addition, effects on the airway and breathing have been described. Aim of this study was to assess the effects of SARPE on the nasal soft tissue and the upper airway by means of three-dimensional stereophotogrammetry and cone beam computed tomography (CBCT). METHODS: This retrospective study used preoperative and postoperative cone beam computed tomography (CBCT) scans and three-dimensional stereophotogrammetry. Ten skeletally adult patients (4 male, 6 female; mean age 27.68 years) with transverse maxillary hypoplasia were included. Patients had undergone SARPE procedure, performed by the same surgical team using the same technique. Nasal soft tissue changes were analyzed, using three-dimensional stereophotogrammetry records taken preoperatively (t0) and at the postoperative checkup appointment (t1). The upper airway was assessed using CBCT scans for surgical planning (t0) and the first scan taken after SARPE (t1). RESULTS: In stereophotogrammetry, it was shown that only a few soft tissue nasal parameters increased significantly and SARPE leads to mainly clinically irrelevant changes in nasal soft tissue. In CBCT, only a significant increase in nasopharyngeal airway volume was found. DISCUSSION: Results were in alignment with literature. The effects of SARPE on the nasal soft tissue are mostly statistically insignificant and clinically irrelevant. Airway volume significantly increased in the nasopharyngeal area. Further research on SARPE effects should be conducted to reinforce SARPE as a treatment option for sleep apnea patients.

Septal extension graft in cleft rhinoplasty: Patients with secondary unilateral cleft lip nasal deformity.

BACKGROUND: Tip refinement procedure is still controversial in secondary unilateral cleft rhinoplasty. The aim of this study was to assess whether septal extension graft improved nasal and tip deformity and achieved a normal profile with clinical and 3D morphometric analyses. METHODS: A consecutive series of 194 skeletally mature patients with unilateral cleft were included and analyzed. All had undergone secondary open rhinoplasty, performed by a single surgeon, with the use of septal extension graft between 2013 and 2021. Clinical data were collected, and 3D morphometric measurements were performed. An age-, sex-, and ethnicity-matched normal group was included for comparisons. RESULTS: Our standard procedures included open approach combining reverse U incision, septal extension graft, dorsal augmentation, lip revision, and vermilion augmentation. The postoperative outcome showed significantly increased numerical values (nasal bridge length, nasal height, nasal tip projection, nasal dorsum angle, columellar angle, columellar-lobule angle, nostril height ratio, nasal surface area, nasal volume) and decreased numerical values (alar width, tip/middle deviation, nasal tip angle, labial-columellar angle) than the preoperative morphology. The postoperative measurement showed significantly higher numerical values (nasal protrusion, tip/middle deviation, nasal dorsum angle), and lower numerical values (columellar-lobule angle, nostril height ratio, alar width ratio) than the control group. CONCLUSION: This study revealed that our secondary cleft rhinoplasty significantly improved the under-projected, up-rotated, deviated, and poorly defined tip as well as short nasal bridge deformities. The technique could result in the nose of the patients with cleft lip nasal deformity being closer to that of the normative profile.

Objectifying the Role of the Depressor Anguli Oris Muscle Using High-Resolution Ultrasound: A Prospective Study.

BACKGROUND: In the setting of facial palsy, synkinesis of the depressor anguli oris (DAO) muscle is a common pathology, impairing dynamic and resting facial symmetry.In this prospective study, the authors used high-resolution ultrasound (HRUS) to evaluate the morphologic features of DAO and to quantify bilateral differences in DAO cross-sectional diameter (CSD) in individuals with unilateral synkinesis. METHODS: From June of 2020 to May of 2021, 30 patients (19 women, 11 men) with clinically diagnosed unilateral synkinesis underwent evaluation with HRUS. DAO CSD was measured bilaterally, 1 cm inferior to the modiolus, in both the resting and smiling positions. RESULTS: The Sunnybrook Facial Grading System Synkinesis Score was 6.20 ± 2.48 (range, 0 to 10). DAO CSD at rest measured 2.41 ± 0.67 mm (range, 1.40 to 4.00 mm) on the control side and 2.66 ± 0.98 mm (range, 1.60 to 5.10 mm) on the affected side. On the control side, DAO CSD was reduced by -0.19 ± 0.43 mm (range, -1.10 to 1.12 mm) during smiling. In contrast, the synkinetic DAO CSD increased by 0.64 ± 0.38 mm (range, 0.00 to 1.59 mm) ( P < 0.001) with animation. The pattern of increased CSD in synkinetic DAO muscles and decreased or unchanged CSD on the control side during smiling was identified in 70% of patients. CONCLUSIONS: HRUS demonstrates increased CSD in synkinetic DAO muscles during active smiling. The opposite is true for DAO muscles on the control side, which exhibit decreased CSD with animation. HRUS can be performed preoperatively to objectify DAO dysfunction and guide targeted therapy. CLINICAL QUESTION/LEVEL OF EVIDENCE: Diagnostic, IV.

Using High-Resolution Ultrasound to Assess Post-Facial Paralysis Synkinesis-Machine Settings and Technical Aspects for Facial Surgeons.

BACKGROUND: Synkinesis of the facial musculature is a detrimental sequalae in post-paralytic facial palsy (PPFP) patients. Detailed knowledge on the technical requirements and device properties in a high-resolution ultrasound (HRUS) examination is mandatory for a reliable facial muscle assessment in PPFP patients. We therefore aimed to outline the key steps in a HRUS examination and extract an optimized workflow schema. METHODS: From December 2020 to April 2021, 20 patients with unilateral synkinesis underwent HRUS. All HRUS examinations were performed by the first author using US devices with linear multifrequency transducers of 4-18 MHz, including a LOGIQ E9 and a LOGIQ S7 XDclear (GE Healthcare; Milwaukee, WI, USA), as well as Philips Affinity 50G (Philips Health Systems; Eindhoven, the Netherlands). RESULTS: Higher-frequency and multifrequency linear probes ≥15 MHz provided superior imaging qualities. The selection of the preset program Small Parts, Breast or Thyroid was linked with a more detailed contrast of the imaging morphology of facial tissue layers. Frequency (Frq) = 15 MHz, Gain (Gn) = 25-35 db, Depth (D) = 1-1.5 cm, and Focus (F) = 0.5 cm enhanced the image quality and assessability. CONCLUSIONS: An optimized HRUS examination protocol for quantitative and qualitative facial muscle assessments was proposed.

Do-It-Yourself Preoperative High-Resolution Ultrasound-Guided Flap Design of the Superficial Circumflex Iliac Artery Perforator Flap (SCIP).

The superficial circumflex iliac artery perforator (SCIP) flap is a well-documented, thin, free tissue flap with a minimal donor site morbidity, and has the potential to become the new method for resurfacing moderate-size skin defects. The aim of this study is to describe an easy, reliable, systematic, and standardized approach for preoperative SCIP flap design and perforator characterization, using color-coded duplex sonography (CCDS). A list of customized settings and a straightforward algorithm are presented, which are easily applied by an operator with minimal experience. Specific settings for SCIP flap perforator evaluation were investigated and tested on 12 patients. Deep and superficial superficial circumflex iliac artery (SCIA) branches, along with their corresponding perforators and cutaneous veins, were marked individually with a permanent marker and the anatomy was verified intraoperatively. From this, a simplified procedure for preoperative flap design of the SCIP flap was developed. Branches could be localized and evaluated in all patients. A preoperative structured procedure for ultrasonically guided flap design of the SCIP flap is described. A 100% correlation between the number and emergence points of the branches detected by preoperative CCDS mapping and the intraoperative anatomy was found.