RESUMO
The pursuit of highly efficient and stable wide-band gap (WBG) perovskite solar cells (PSCs), especially for monolithic perovskite/silicon tandem devices, is a key focus in achieving the commercialization of perovskite photovoltaics. In this study, we initially designed poly(ionic liquid)s (PILs) with varying alkyl chain lengths based on density functional theory calculations. Results pinpoint that PILs with longer alkyl chain lengths tend to exhibit more robust binding energy with the perovskite structure. Then we synthesized the PILs to craft a hydrophobic hydrogen-bonded polymer network (HHPN) that passivates the WBG perovskite/electron transport layer interface, inhibits ion migration and serves as a barrier layer against water and oxygen ingression. Accordingly, the HHPN effectively curbs nonradiative recombination losses while facilitating efficient carrier transport, resulting in substantially enhanced open-circuit voltage (Voc ) and fill factor. As a result, the optimized single-junction WBG PSC achieves an impressive efficiency of 23.18 %, with Voc as high as 1.25â V, which is the highest reported for WBG (over 1.67â eV) PSCs. These devices also demonstrate outstanding thermostability and humidity resistance. Notably, this versatile strategy can be extended to textured perovskite/silicon tandem cells, reaching a remarkable efficiency of 28.24 % while maintaining exceptional operational stability.
RESUMO
Inverted perovskite solar cells (PSCs) are preferred for tandem applications due to their superior compatibility with diverse bottom solar cells. However, the solution processing and low formation energy of perovskites inevitably lead to numerous defects at both the bulk and interfaces. We report a facile and effective strategy for precisely modulating the perovskite by incorporating AlOx deposited by atomic layer deposition (ALD) on the top interface. We find that Al3+ can not only infiltrate the bulk phase and interact with halide ions to suppress ion migration and phase separation but also regulate the arrangement of energy levels and passivate defects on the perovskite surface and grain boundaries. Additionally, ALD-AlOx exhibits an encapsulation effect through a dense interlayer. Consequently, the ALD-AlOx treatment can significantly improve the power conversion efficiency (PCE) to 21.80 % for 1.66 electron volt (eV) PSCs. A monolithic perovskite-silicon TSCs using AlOx-modified perovskite achieved a PCE of 28.5 % with excellent photothermal stability. More importantly, the resulting 1.55â eV PSC and module achieved a PCE of 25.08 % (0.04â cm2) and 21.01 % (aperture area of 15.5â cm2), respectively. Our study provides an effective way to efficient and stable wide-band gap perovskite for perovskite-silicon TSCs and paves the way for large-area inverted PSCs.
RESUMO
Optical simulations allow the evaluation of the absorption, reflection, and transmission of each functional layer of solar cells and, therefore, are of great importance for the design of high-efficiency crystalline silicon (c-Si) solar cells. Here, a multi-scale simulation method (MSM) based on ray and wave optics is proposed to investigate the optical characteristics of c-Si solar cells. The ray and wave optical methods are first independently employed on inverted pyramid glass sheets, where the latter one can describe the size-dependent interfacial scattering characteristics more accurately. Then the optical properties of a c-Si solar cell with a tunnel oxide passivated carrier-selective contact configuration are studied by employing the MSM, where scattering at the interfaces is acquired by a finite-difference time-domain method (wave optics). Since the MSM can accurately simulate optical modes such as the Rayleigh anomaly, Bloch mode, and Mie resonances, the reflection and transmission spectra of the whole device are in good agreement with the measured data. The proposed MSM has proven to be accurate for structures with functional thin films, which can be extended to hybrid tandem devices with top-level cells consisting of stacks of layers with similar dimensions.
RESUMO
The overall efficiency and image uniformity are important criteria for augmented reality display. The conventional in-coupling grating design intending to improve only the first-order diffraction efficiency without considering the multiple interactions with diffracted light in the waveguide is insufficient. In this work, the back-coupling loss (BCL) on the in-coupling surface relief grating, and the power of light arriving at the out-coupling grating over that of incident light (denoted as optical efficiency in waveguide, OEW) are introduced for the design of in-coupling grating. A simple and effective method to increase diffraction efficiency with unique angular selectivity is demonstrated by inserting an interlayer between the waveguide and grating. The optimized average OEW and its uniformity under a field of view of 40° are increased from 8.02% and 24.83% to 8.34% and 35.02% by introducing a region-selective MgF2 interlayer.
RESUMO
Irreversible electroporation (IRE) kills tumor cells by the delivery of short pulses of strong electric fields. However, the field strength decreases with distance from the treatment center. When IRE cannot eradicate the entire tumor mass, the surviving tumor cells can regrow. NVP-BEZ235 is a dual PI3K/mTOR inhibitor that has been administered orally in clinical trials. However, its hydrophobicity and poor water solubility make NVP-BEZ235 difficult to deliver to target areas. To improve its pharmacokinetics and therapeutic efficacy, we have encapsulated NVP-BEZ235 in a liposome (termed as L-BEZ). Our current study focuses on the long-term antitumor efficacy of IRE and intratumoral injection of L-BEZ in HN5 head and neck cancer xenografts in nude mice. We compared in vitro efficacy, as well as the effect on tumor size and growth rate in vivo, between IRE alone, IRE + oral BEZ, and IRE + L-BEZ over the course of two months. All animals in the control group were sacrificed by day 36, due to excess tumor burden. Tumors treated with IRE alone grew faster and larger than those in the control group. IRE + oral BEZ suppressed tumor growth, but the growth rate increased to that of the controls toward the end of 21 days. Only IRE + L-BEZ eradicated the tumor masses, with no palpable or extractable tumor mass observed after two months. The combination of IRE and L-BEZ could effectively eradicate tumors and prevent recurrence.
Assuntos
Antineoplásicos/administração & dosagem , Carcinoma de Células Escamosas/tratamento farmacológico , Neoplasias de Cabeça e Pescoço/tratamento farmacológico , Imidazóis/administração & dosagem , Quinolinas/administração & dosagem , Animais , Antineoplásicos/farmacocinética , Cápsulas , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Eletroquimioterapia , Eletroporação , Feminino , Humanos , Interações Hidrofóbicas e Hidrofílicas , Imidazóis/farmacocinética , Lipossomos , Camundongos , Camundongos Nus , Quinolinas/farmacocinética , Solubilidade , Resultado do Tratamento , Ensaios Antitumorais Modelo de XenoenxertoRESUMO
BACKGROUND The Wnt/ß-catenin signaling pathway participates in many important tumorigeneses processes, including bladder cancer. The inhibition of abnormal activation of Wnt pathways might provide a new approach to tumor treatment. In the present study, we investigated the role of IC-2, a novel Wnt pathways small molecular inhibitor, in bladder cancer tumorigenesis. MATERIAL AND METHODS Bladder cancer cells were treated with various concentrations of IC-2 (0-5 µM) in vitro. The proliferation ability was measured using colony formation assay and apoptosis was measured using flow cytometry analysis. The protein expression was detected using Western blot analysis. Xenograft in vivo assay was performed to assess tumor growth. RESULTS IC-2 suppressed the proliferation and aggravated the apoptosis of bladder cancer cells in dose-dependent and time-dependent manners in vitro. Moreover, high concentrations of IC-2 inhibited the Wnt pathway-related protein expression levels, including ß-catenin, Cyclin D1, and TCF4. In vivo, administration of IC-2 in xenograft mice decreased the ß-catenin expression and reduced the tumor volume. CONCLUSIONS Our results validate the tumor-inhibition effect of IC-2 on bladder cancer in vivo and in vitro, providing a novel therapeutic strategy for bladder cancer.
Assuntos
Óleos Voláteis/farmacologia , Neoplasias da Bexiga Urinária/tratamento farmacológico , Neoplasias da Bexiga Urinária/metabolismo , Via de Sinalização Wnt/efeitos dos fármacos , Animais , Apoptose/efeitos dos fármacos , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Humanos , Camundongos , Camundongos Endogâmicos BALB C , Neoplasias da Bexiga Urinária/genética , Proteínas Wnt/metabolismo , Ensaios Antitumorais Modelo de Xenoenxerto/métodos , beta Catenina/metabolismoRESUMO
Micropatterned TiO2 nanorods (TiO2NRs) via three-dimensional (3D) geometry engineering in both microscale and nanoscale decorated with graphene quantum dots (GQDs) have been demonstrated successfully. First, micropillar (MP) and microcave (MC) arrays of anatase TiO2 films are obtained through the sol-gel based thermal nanoimprinting method. Then they are employed as seed layers in hydrothermal growth to fabricate the 3D micropillar/microcave arrays of rutile TiO2NRs (NR), which show much-improved photoelectrochemical water-splitting performance than the TiO2NRs grown on flat seed layer. The zero-dimensional GQDs are sequentially deposited onto the surfaces of the microscale patterned nanorods. Owing to the fast charge separation that resulted from the favorable band alignment of the GQDs and rutile TiO2, the MP-NR-GQDs electrode achieves a photocurrent density up to 2.92 mA cm(-2) under simulated one-sun illumination. The incident-photon-to-current-conversion efficiency (IPCE) value up to 72% at 370 nm was achieved on the MP-NR-GQDs electrode, which outperforms the flat-NR counterpart by 69%. The IPCE results also imply that the improved photocurrent mainly benefits from the distinctly enhanced ultraviolet response. The work provides a cost-effective and flexible pathway to develop periodic 3D micropatterned photoelectrodes and is promising for the future deployment of high performance optoelectronic devices.
RESUMO
Thermal nanoimprinting technology was employed to fabricate 3D periodic nanocone ZnO films with different height/pitch values for photodetectors to optimize their light capturing property. The photocurrents of patterned film photodetectors increase with the height/pitch values. The patterned ZnO-Au hybrid film further boosts the ultraviolet (UV) response. Due to the co-contribution of the light trapping of 3D periodic structures and the driving force of the Schottky barrier in the Au/ZnO interface, the patterned ZnO-Au hybrid films with height/pitch of 40 nm/866 nm exhibit the best UV photoresponse (I on/I off = 779.927), which is 3.8 times higher than its film counterpart (I on/I off = 164.1).
RESUMO
Multiscale metallic nanostrucutures, which support hybrid coupling of plasmon resonances, are essential for the engineering of plasmonic devices. The fabrication of large area periodic multiscale structures still remains a challenge, considering the cost and efficiency. In this work, highly ordered multiscale Ag nanoarrays with lateral dimensions of up to 6 mm × 6 mm have been successfully fabricated on both rigid silicon and flexible polydimethylsiloxane (PDMS) substrate by thermal evaporation using ultrathin anodic aluminum oxide films as masks. Owing to the peculiarities of thermal evaporation and the variance of substrate surface energy, the unit cell of the periodic arrays consist of a core-satellite structure on silicon and randomly distributed child particles on PDMS, with gaps as small as 10 nm. The flexible Ag nanoarrays on PDMS demonstrate a broadband extraordinary optical transmission with an enhancement up to 2.7 times when normalized to the exposed area. Moreover, the transmission and diffraction properties can readily be controlled by stretching the PDMS. These tunable optical properties support the multiscale Ag nanoarrays to be applied in some optical and optoelectronic devices.
RESUMO
OBJECTIVE: To investigate the inhibition of sanguinarine on S180 sarcoma in mice and the effect of angiogenesis. METHODS: S180 subcutaneous implanted tumor model mice were randomly divided into six groups: control group, cyclophosphamide (CTX) group, sanguinarine (10, 20 and 40 mg/kg) groups and combination group. The mice were sacrificed on the 10th day to measure the tumor weight and volumes, and caculate the tumor growth inhibition. Histopathology was performed, while immunohistochemistry was applied for assessment of MVD (microvascular density) and the expression of VEGF (vascular endothelial growth factor). RESULTS: The growth of tumors were significantly inhibited in the treatment groups (CTX group, sanguinarine 20 and 40 mg/kg groups, and combination group). HE staining showed tumor cell atypia and pathologic micosis were lower than that of the control group. Scattered and fusion of the slice necrosis foci were observed in the treatment groups. CTX, sanguinarine (20 and 40 mg/kg) and combination significantly reduced the expression of MVD and VEGF compared with the control group (P < 0.01, P < 0.05). CONCLUSION: Sanguinarine can effectively inhibit the growth of S180 implanted tumors via reducing MVD and the expression of VEGF, which is associated with its anti-angiogenesis.
Assuntos
Benzofenantridinas/farmacologia , Isoquinolinas/farmacologia , Sarcoma 180/tratamento farmacológico , Animais , Ciclofosfamida/farmacologia , Camundongos , Camundongos Endogâmicos BALB C , Neovascularização Patológica , Carga Tumoral , Fator A de Crescimento do Endotélio Vascular/metabolismoRESUMO
A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells. The control of forming uniform and large-area film and perovskite crystallization is still the main obstacle restricting the efficiency of PSMs. In this work, we adopted a solid-liquid two-step film formation technique, which involved the evaporation of a lead iodide film and blade coating of an organic ammonium halide solution to prepare perovskite films. This method possesses the advantages of integrating vapor deposition and solution methods, which could apply to substrates with different roughness and avoid using toxic solvents to achieve a more uniform, large-area perovskite film. Furthermore, modification of the NiOx/perovskite buried interface and introduction of Urea additives were utilized to reduce interface recombination and regulate perovskite crystallization. As a result, a large-area perovskite film possessing larger grains, fewer pinholes, and reduced defects could be achieved. The inverted PSM with an active area of 61.56 cm2 (10 × 10 cm2 substrate) achieved a champion power conversion efficiency of 20.56% and significantly improved stability. This method suggests an innovative approach to resolving the uniformity issue associated with large-area film fabrication.
RESUMO
BACKGROUND: Gut microbiota dysbiosis significantly contributes to progression of depression. Hypericum perforatum L. (HPL) is traditionally used in Europe for treating depression. However, its mechanism remains largely underexplored. PURPOSE: This study aims to investigate the pivotal gut microbiota species and microbial signaling metabolites associated with the antidepressant effects of HPL. METHODS: Fecal microbiota transplantation was used to assess whether HPL mitigates depression through alterations in gut microbiota. Microbiota and metabolic profiling of control, chronic restraint stress (CRS)-induced depression, and HPL-treated CRS mice were examined using 16S rRNA gene sequencing and metabolomics analysis. The influence of gut microbiota on HPL's antidepressant effects was assessed by metabolite and bacterial intervention experiments. RESULTS: HPL significantly alleviated depression symptoms in a manner dependent on gut microbiota and restored gut microbial composition by enriching Akkermansia muciniphila (AKK). Metabolomic analysis indicated that HPL regulated tryptophan metabolism, reducing kynurenine (KYN) levels derived from microbiota and increasing 5-hydroxytryptophan (5-HTP) levels. Notably, supplementation with KYN activated the NFκB-NLRP2-Caspase1-IL1ß pathway and increased proinflammatory IL1ß in the hippocampus of mice with depression. Interestingly, mono-colonization with AKK notably increased 5-hydroxytryptamine (5-HT) and decreased KYN levels, ameliorating depression symptoms through modulation of the NFκB-NLRP2-Caspase1-IL1ß pathway. CONCLUSIONS: The promising therapeutic role of HPL in treating depression is primarily attributed to its regulation of the NFκB-NLRP2-Caspase1-IL1ß pathway, specifically by targeting AKK and tryptophan metabolites.
Assuntos
Akkermansia , Antidepressivos , Depressão , Microbioma Gastrointestinal , Hypericum , Interleucina-1beta , NF-kappa B , Triptofano , Animais , Hypericum/química , Microbioma Gastrointestinal/efeitos dos fármacos , Depressão/tratamento farmacológico , Triptofano/metabolismo , Triptofano/farmacologia , Masculino , NF-kappa B/metabolismo , Interleucina-1beta/metabolismo , Camundongos , Antidepressivos/farmacologia , Camundongos Endogâmicos C57BL , Caspase 1/metabolismo , Transplante de Microbiota Fecal , Verrucomicrobia , Extratos Vegetais/farmacologia , Transdução de Sinais/efeitos dos fármacos , Disbiose/tratamento farmacológico , Disbiose/microbiologia , Modelos Animais de DoençasRESUMO
High capacitance and high output voltage are two important research focuses of electrochemical supercapacitors. Herein we present two novel designs (laminated and tandem) of coin-cell supercapacitors based on a textile coated with active material. The fabric electrodes were prepared by dipping the non-woven cloth into a dispersion of carbon nanotubes and subsequent MnO2 electrodeposition. In the lamination configuration, several pieces of active-material-coated cloth were laminated to construct individual electrodes that enable fold-increased areal capacitances and excellent cycling stability. In the tandem structure, individual cells with solid-state electrolyte (polyvinyl alcohol/H3PO4) sandwiched between the fabric electrodes were stacked together to form a single device. The assembled device composed by ten unit cells was demonstrated to drive four LED digital screens in series with 10â V output.
RESUMO
One-dimensional anodic titanium oxide (ATO) nanotube arrays hold great potential as electrode materials for high-performance electrochemical supercapacitors. However, their poor electronic conductivity limits their practical applications. Here, we develop a hydrogen (H2) plasma treatment method to greatly improve the electrochemical performance of ATO electrodes. Compared with pristine ATO, the nanotubes treated by H2 plasma illumination (ATO-H) present a rough and amorphous layer at the surface of the nanotubes with simultaneously incorporated Ti(3+) and -OH groups. At a current density of 0.05 mA cm(-2) in charge-discharge measurements, the specific capacitance of the ATO-H electrode has substantially increased ~7.4 times, with a value as high as 7.22 mF cm(-2). Moreover, the novel ATO-H electrode has also exhibited excellent rate capability (6.37 mF cm(-2) at a current density of 2 mA cm(-2)) and cycling performance with no degradation after 10,000 cycles.
RESUMO
As a promising candidate for high-density data storage and neuromorphic computing, cross-point memory arrays provide a platform to overcome the von Neumann bottleneck and accelerate neural network computation. In order to suppress the sneak-path current problem that limits their scalability and read accuracy, a two-terminal selector can be integrated at each cross-point to form the one-selector-one-memristor (1S1R) stack. In this work, we demonstrate a CuAg alloy-based, thermally stable and electroforming-free selector device with tunable threshold voltage and over 7 orders of magnitude ON/OFF ratio. A vertically stacked 64 × 64 1S1R cross-point array is further implemented by integrating the selector with SiO2-based memristors. The 1S1R devices exhibit extremely low leakage currents and proper switching characteristics, which are suitable for both storage class memory and synaptic weight storage. Finally, a selector-based leaky integrate-and-fire neuron is designed and experimentally implemented, which expands the application prospect of CuAg alloy selectors from synapses to neurons.
RESUMO
The buried interface in perovskite solar cells (PSCs) is pivotal for achieving high efficiency and stability. However, it is challenging to study and optimize the buried interface due to its non-exposed feature. Here, a facile and effective strategy is developed to modify the SnO2 /perovskite buried interface by passivating the buried defects in perovskite and modulating carrier dynamics via incorporating formamidine oxalate (FOA) in SnO2 nanoparticles. Both formamidinium and oxalate ions show a longitudinal gradient distribution in the SnO2 layer, mainly accumulating at the SnO2 /perovskite buried interface, which enables high-quality upper perovskite films, minimized defects, superior interface contacts, and matched energy levels between perovskite and SnO2 . Significantly, FOA can simultaneously reduce the oxygen vacancies and tin interstitial defects on the SnO2 surface and the FA+ /Pb2+ associated defects at the perovskite buried interface. Consequently, the FOA treatment significantly improves the efficiency of the PSCs from 22.40% to 25.05% and their storage- and photo-stability. This method provides an effective target therapy of buried interface in PSCs to achieve very high efficiency and stability.
RESUMO
Developing efficient crystalline silicon/wide-band gap metal-oxide thin-film heterostructure junction-based crystalline silicon (c-Si) solar cells has been an attractive alternative to the silicon thin film-based counterparts. Herein, nickel oxide thin films are introduced as the hole-selective layer for c-Si solar cells and prepared using the reactive sputtering technique with the target of metallic nickel. An optimal Ni3+ self-doped NiO x film is obtained by tuning the reactive oxygen atmosphere to construct the optimized c-Si/NiO x heterostructure band alignment. A thin SiO x interlayer was further introduced to reduce the defect of the c-Si/NiO x interface with the UV-ozone (UVO) treatment. The constructed p-type c-Si/SiO x /NiO x /Ag solar cell exhibits an increase in the open voltage from 586 to 611 mV and achieves a 19.2% conversion efficiency.
RESUMO
Introduction Prostate brachytherapy provides the most durable local control for prostate adenocarcinoma among all radiation treatment options. However, likely due to decreased trainee familiarity with the technique and resource intensity, it has seen a decline in utilization. Here we outline our experience with starting a high-dose-rate (HDR) prostate brachytherapy program within a residency training program and present our outcome data. Methods Patients were identified and screened using clinical data and volume study for candidacy for brachytherapy implantation. Eligible candidates were implanted and subsequently had radiation planning and delivery in our clinic. Descriptive statistical analysis was performed on our outcomes and dosimetry data and presented in tabular form. Results Seventeen patients were treated for a total of 18 implants (one monotherapy). No implant was aborted. No acute urinary retention requiring catheterization or chronic urethral stricture occurred. Biochemical recurrence-free survival was 94% at a median follow-up of 28.5 months (range 8.2-50 months); the one failure occurred in a very high-risk patient at 37 months following treatment. Dosimetrically, prostate coverage, urethra sparing, and rectum sparing aims were met. Volumetric bladder aims were also met; however, the max point dose to the bladder neck was above the guideline. Conclusion Our department successfully implemented an HDR prostate brachytherapy program. Treatments were effective and there was no grade 3 toxicity to report.
RESUMO
Owing to its large work function, MoOX has been widely used for hole-selective contact in both thin film and crystalline silicon solar cells. In this work, thermally evaporated MoOX films are employed on the rear sides of p-type crystalline silicon (p-Si) solar cells, where the optical and electronic properties of the MoOX films as well as the corresponding device performances are investigated as a function of post-annealing treatment. The MoOX film annealed at 100 °C shows the highest work function and proves the best hole selectivity based on the results of energy band simulation and contact resistivity measurements. The full rear p-Si/MoOX/Ag-contacted solar cells demonstrate the best performance with an efficiency of 19.19%, which is the result of the combined influence of MoOX's hole selectivity and passivation ability.
RESUMO
Passivating contacts that simultaneously promote carrier selectivity and suppress surface recombination are considered as a promising trend in the crystalline silicon (c-Si) photovoltaic industry. In this work, efficient p-type c-Si (p-Si) solar cells with cuprous oxide (Cu2O) hole-selective contacts are demonstrated. The direct p-Si/Cu2O contact leads to a substoichiometric SiOx interlayer and diffusion of Cu into the silicon substrate, which would generate a deep-level impurity behaving as carrier recombination centers. An Al2O3 layer is subsequently employed at the p-Si/Cu2O interface, which not only serves as a passivating and tunneling layer but also suppresses the redox reaction and Cu diffusion at the Si/Cu2O interface. In conjunction with the high work function of Au and the superior optical property of Ag, a power conversion efficiency up to 19.71% is achieved with a p-Si/Al2O3/Cu2O/Au/Ag rear contact. This work provides a strategy for reducing interfacial defects and lowering energy barrier height in passivating contact solar cells.