RESUMO
Grazing exclusion (GE), as an effective strategy for revitalizing degraded grasslands, possesses the potential to increase ecosystem respiration (Re) and significantly influence the capacity of grassland soils to sequester carbon. However, our current grasp of Re dynamics in response to varying durations of GE, particularly in the context of precipitation fluctuations, remains incomplete. To fill this knowledge gap, we conducted a monitoring of Re over a 40-year GE chronosequence within Inner Mongolia temperate typical steppe across two distinct hydrologically years. Overall, Re exhibited a gradual saturation curve and an increasing trend with the duration of GE in the wet year of 2021 and the normal precipitation year of 2022, respectively. The variance primarily stemmed from relatively higher microbial biomass carbon observed in the short-term GE during 2022 in contrast to 2021. Moreover, the impacts of GE on the sensitivities of Re to moisture and temperature were intricately tied to precipitation patterns. increasing significantly with prolonged GE duration in 2022 but not in 2021. Our study highlights the intricate interplay between GE duration, precipitation variability, and Re dynamics. This deeper understanding enhances our ability to predict and manage carbon cycling within typical steppe in Inner Mongolia, offering invaluable insights for effective restoration strategies and climate change mitigation.
Assuntos
Biomassa , China , Ciclo do Carbono , Chuva , Solo , Microbiologia do SoloRESUMO
Charge compensation from cationic and anionic redox couples accompanying Na+ (de)intercalation in layered oxide cathodes contributes to high specific capacity. However, the engagement level of different redox couples remains unclear and their relationship with Na+ content is less studied. Here we discover that it is possible to take full advantage of the high-voltage transition metal (TM) redox reaction through low-valence cation substitution to tailor the electronic structure, which involves an increased ratio of Na+ content to available charge transfer number of TMs. Taking NaxCu0.11Ni0.11Fe0.3Mn0.48O2 as the example, the Li+ substitution increases the ratio to facilitate the high-voltage TM redox activity, and further F-ion substitution decreases the covalency of the TM-O bond to relieve structural changes. As a consequence, the final high-entropy Na0.95Li0.07Cu0.11Ni0.11Fe0.3Mn0.41O1.97F0.03 cathode demonstrates â¼29% capacity increase contributed by the high-voltage TMs and exhibits excellent long-term cycling stability due to the improved structural reversibility. This work provides a paradigm for the design of high-energy-density electrodes by simultaneous electronic and crystal structure modulation.
RESUMO
Li and Na metals with high energy density are promising in application in rechargeable batteries but suffer from degradation in the ambient atmosphere. The phenomenon that in terms of kinetics, Li is stable but Na is unstable in dry air has not been fully understood. Here, we use in situ environmental transmission electron microscopy combined with theoretical simulations and reveal that the different stabilities in dry air for Li and Na are reflected by the formation of compact Li2O layers on Li metal, while porous and rough Na2O/Na2O2 layers on Na metal are a consequence of the different thermodynamic and kinetics in O2. It is shown that a preformed carbonate layer can change the kinetics of Na toward an anticorrosive behavior. Our study provides a deeper understanding of the often-overlooked chemical reactions with environmental gases and enhances the electrochemical performance of Li and Na by controlling interfacial stability.
RESUMO
Na-ion layered oxide cathodes (NaxTMO2, TM = transition metal ion(s)), as an analogue of lithium layered oxide cathodes (such as LiCoO2, LiNixCoyMn1-x-yO2), have received growing attention with the development of Na-ion batteries. However, due to the larger Na+ radius and stronger Na+-Na+ electrostatic repulsion in NaO2 slabs, some undesired phase transitions are observed in NaxTMO2. Herein, we report a high-entropy configuration strategy for NaxTMO2 cathode materials, in which multicomponent TMO2 slabs with enlarged interlayer spacing help strengthen the whole skeleton structure of layered oxides through mitigating Jahn-Teller distortion, Na+/vacancy ordering, and lattice parameter changes. The strengthened skeleton structure with a modulated particle morphology dramatically improves the Na+ transport kinetics and suppresses intragranular fatigue cracks and TM dissolution, thus leading to highly improved performances. Furthermore, the elaborate high-entropy TMO2 slabs enhance the TM-O bonding energy to restrain oxygen release and thermal runaway, benefiting for the improvement of thermal safety.
RESUMO
Heteroatom doping has been proved to effectively enhance the sloping capacity, nevertheless, the high sloping capacity almost encounters a conflict with the disappointing initial Coulombic efficiency (ICE). Herein, we propose a heteroatom configuration screening strategy by introducing a secondary carbonization process for the phosphate-treated carbons to remove the irreversible heteroatom configurations but with the reversible ones and free radicals remaining, achieving a simultaneity between the high sloping capacity and ICE (≈250â mAh g-1 and 80 %). The Na storage mechanism was also studied based on this "slope-dominated" carbon to reveal the reason for the absence of the plateau. This work could inspire to distinguish and filter the irreversible heteroatom configurations and facilitate the future design of practical "slope-dominated" carbon anodes towards high-power Na-ion batteries.
RESUMO
Layered Na-based oxides with the general composition of NaxTMO2 (TM: transition metal) have attracted significant attention for their high compositional diversity that provides tunable electrochemical performance for electrodes in sodium-ion batteries. The various compositions bring forward complex structural chemistry that is decisive for the layered stacking structure, Na-ion conductivity, and the redox activity, potentially promising new avenues in functional material properties. In this work, we have explored the maximum Na content in P2-type layered oxides and discovered that the high-content Na in the host enhances the structural stability; moreover, it promotes the oxidation of low-valent cations to their high oxidation states (in this case Ni2+). This can be rationalized by the increased hybridization of the O(2p)-TM(3d-eg*) states, affecting both the local TM environment as well as the interactions between the NaO2 and TMO2 layers. These properties are highly beneficial for the Na storage capabilities as required for cathode materials in sodium-ion batteries. It leads to excellent Na-ion mobility, a large storage capacity (>100 mAh g-1 between 2.0-4.0 V), yet preventing the detrimental sliding of the TMO2 layers (P2-O2 structural transition), as reflected by the ultralong cycle life (3000 (dis)charge cycles demonstrated). These findings expand the horizons of high Na-content P2-type materials, providing new insights of the electronic and structural chemistry for advanced cathode materials.
RESUMO
Reversibly intercalating ions into host materials for electrochemical energy storage is the essence of the working principle of rocking-chair type batteries. The most relevant example is the graphite anode for rechargeable Li-ion batteries which has been commercialized in 1991 and still represents the benchmark anode in Li-ion batteries 30 years later. Learning from past lessons on alkali metal intercalation in graphite, recent breakthroughs in sodium and potassium intercalation in graphite have been demonstrated for Na-ion batteries and K-ion batteries. Interestingly, some significant differences proved to exist for the intercalation of Na+ and K+ into graphite compared with the Li+ case. Such different host-guest interactions are unique depending on the host materials and electrolytes, which greatly contribute to a deeper understanding of intercalation-type electrode materials for next generation alkali metal ion batteries. This review summarizes significant advances from both experimental and theoretical calculations with a focus on comparing the intercalation of three alkali metal ions (Li+, Na+, K+) into graphite and aims to clarify the intimate host-guest relationships and the underlying mechanisms. New approaches developed to achieve favorable intercalation coupled with the challenges in this field are also discussed. We also extrapolate alkali metal ion intercalation in graphite to mono-/multi-valent ions in layered electrode materials, which will deepen the understanding of intercalation chemistry and provide guidance to explore new guests and hosts.
RESUMO
Material innovation on high-performance Na-ion cathodes and the corresponding understanding of structural chemistry still remain a challenge. Herein, we report a new concept of high-entropy strategy to design layered oxide cathodes for Na-ion batteries. An example of layered O3-type NaNi0.12 Cu0.12 Mg0.12 Fe0.15 Co0.15 Mn0.1 Ti0.1 Sn0.1 Sb0.04 O2 has been demonstrated, which exhibits the longer cycling stability (ca. 83 % of capacity retention after 500â cycles) and the outstanding rate capability (ca. 80 % of capacity retention at the rate of 5.0 C). A highly reversible phase-transition behavior between O3 and P3 structures occurs during the charge-discharge process, and importantly, this behavior is delayed with more than 60 % of the total capacity being stored in O3-type region. Possible mechanism can be attributed to the multiple transition-metal components in this high-entropy material which can accommodate the changes of local interactions during Na+ (de)intercalation. This strategy opens new insights into the development of advanced cathode materials.
RESUMO
Replacing the commonly used nonaqueous liquid electrolytes in rechargeable sodium batteries with polymer solid electrolytes is expected to provide new opportunities to develop safer batteries with higher energy densities. However, this poses challenges related to the interface between the Na-metal anode and polymer electrolytes. Driven by systematically investigating the interface properties, an improved interface is established between a composite Na/C metal anode and electrolyte. The observed chemical bonding between carbon matrix of anode with solid polymer electrolyte, prevents delamination, and leads to more homogeneous plating and stripping, which reduces/suppresses dendrite formation. Full solid-state polymer Na-metal batteries, using a high mass loaded Na3 V2 (PO4 )3 cathode, exhibit ultrahigh capacity retention of more than 92 % after 2 000 cycles and over 80 % after 5 000 cycles, as well as the outstanding rate capability.
RESUMO
The comprehensive performance of carbon anodes for Na-ion batteries (NIBs) is largely restricted by their inferior rate capability and safety issues. Herein, a slope-dominated carbon anode is achieved at a low temperature of 800 °C, which delivers a high reversible capacity of 263â mA h g-1 at 0.15C with an impressive initial Coulombic efficiency (ICE) of 80 %. When paired with the NaNi1/3 Fe1/3 Mn1/3 O2 cathode, the reversible capacity at 6C is still 75 % of that at 0.15C, and 73 % of the capacity is retained after 1000 cycles at 3C. The enhanced Na storage performance could be attributed to the unique microstructure with randomly oriented short carbon layers and the relatively higher defect concentration. Given its robustness, such a low-temperature carbonization strategy could also be applicable to other precursors and provide a new opportunity to design slope-dominated carbon anodes for high safety, low-cost NIBs with excellent ICE and superior rate capability.
RESUMO
Sodium-ion batteries (NIBs), due to the advantages of low cost and relatively high safety, have attracted widespread attention all over the world, making them a promising candidate for large-scale energy storage systems. However, the inherent lower energy density to lithium-ion batteries is the issue that should be further investigated and optimized. Toward the grid-level energy storage applications, designing and discovering appropriate anode materials for NIBs are of great concern. Although many efforts on the improvements and innovations are achieved, several challenges still limit the current requirements of the large-scale application, including low energy/power densities, moderate cycle performance, and the low initial Coulombic efficiency. Advanced nanostructured strategies for anode materials can significantly improve ion or electron transport kinetic performance enhancing the electrochemical properties of battery systems. Herein, this Review intends to provide a comprehensive summary on the progress of nanostructured anode materials for NIBs, where representative examples and corresponding storage mechanisms are discussed. Meanwhile, the potential directions to obtain high-performance anode materials of NIBs are also proposed, which provide references for the further development of advanced anode materials for NIBs.
RESUMO
In the work, a fluorescence switch sensor consists of Mn-doped CdTe quantum dots (QDs) - methyl viologen (MV(2+)) nanohybrid is fabricated. In the sensor, MV(2+) plays a role in turning the QDs fluorescence to the "OFF" state due to the efficient electron transfer process while glutathione (GSH) could turn "ON" the native QDs fluorescence by effectively releasing QDs from the QDs-MV(2+) nanohybrids. In addition, the recovery level of QDs fluorescence is closely related to the amount of GSH. Based on this phenomenon, a reliable and convenient GSH quantitative determination method is established, which not only has a wide determination range of 1.2-200 µM, a low detection limit of 0.06 µM and a short detection time but also can realize the selective detection of GSH upon other competitive biothiols (homocysteine and cysteine) that are coexistent in biological systems. The developed sensor will greatly benefit to the study of GSH amount, helping the understanding of its function in biological systems.
Assuntos
Técnicas Biossensoriais/métodos , Compostos de Cádmio/química , Glutationa/análise , Manganês/química , Nanoestruturas/química , Paraquat/química , Pontos Quânticos , Telúrio/química , Transporte de Elétrons , Fluorescência , Herbicidas/química , Espectrometria de FluorescênciaRESUMO
Based on the quenching of the fluorescence intensity of thioglycolic acid (TGA)-capped core-shell CdTe/ZnS nanoparticles (NPs) by vanillin, a novel, simple and rapid method for the determination of vanillin was proposed. In aqueous medium, the functionalized core-shell CdTe/ZnS NPs were successfully synthesized with TGA as the capping ligand. TGA-capped core-shell CdTe/ZnS NPs were characterized by using X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Factors affecting the vanillin detection were investigated, and the optimum conditions were also determined. Under the optimum conditions, the relative fluorescence intensity of CdTe/ZnS NPs was linearly proportional to vanillin over a concentration range from 9.4 × 10(-7) to 5.2 × 10(-4) M with a correlation coefficient of 0.998 and a detection limit of 2.6 × 10(-7) M. The proposed method was also employed to detect trace vanillin in cookies with satisfactory results.
RESUMO
Air sensitivity remains a substantial barrier to the commercialization of sodium (Na)-layered oxides (NLOs). This problem has puzzled the community for decades because of the complexity of interactions between air components and their impact on both bulk and surfaces of NLOs. We show here that water vapor plays a pivotal role in initiating destructive acid and oxidative degradations of NLOs only when coupled with carbon dioxide or oxygen, respectively. Quantification analysis revealed that reducing the defined cation competition coefficient (η), which integrates the effects of ionic potential and sodium content, and increasing the particle size can enhance the resistance to acid attack, whereas using high-potential redox couples can eliminate oxidative degradation. These findings elucidate the underlying air deterioration mechanisms and rationalize the design of air-stable NLOs.
RESUMO
There are several questions and controversies regarding the Na storage mechanism in hard carbon. This springs from the difficulty of probing the vast diversity of possible configurational environments for Na storage, including surface and defect sites, edges, pores, and intercalation morphologies. In the effort to explain the observed voltage profile, typically existing of a voltage slope section and a low-voltage plateau, several experimental and computational studies have provided a variety of contradicting results. This work employs density functional theory to thoroughly examine Na storage in hard carbon in combination with electrochemical experiments. Our calculation scheme disentangles the possible interactions by evaluating the enthalpies of formation, shedding light on the storage mechanisms. Parallel evaluation of the Li and K storage, and comparison with experiments, put forward a unified reaction mechanism for the three alkali metals. The results underline the importance of exposed metal surfaces and metal-carbon interfaces for the stability of the pore-filling mechanism responsible for the low-voltage plateau, in excellent agreement with the experimental voltage profiles. This generalized understanding provides insights into hard carbons as negative electrodes and their optimized properties.
RESUMO
The deposition of volatilized Na+ on the surface of the cathode during sintering results in the formation of surface residual alkali (NaOH/Na2 CO3 NaHCO3 ) in layered cathode materials, leading to serious interfacial reactions and performance degradation. This phenomenon is particularly evident in O3-NaNi0.4 Cu0.1 Mn0.4 Ti0.1 O2 (NCMT). In this study, a strategy is proposed to transform waste into treasure by converting residual alkali into a solid electrolyte. Mg(CH3 COO)2 and H3 PO4 are reacted with surface residual alkali to generate the solid electrolyte NaMgPO4 on the surface of NCMT, which can be labeled as NaMgPO4@NaNi0.4 Cu0.1 Mn0.4 Ti0.1 O2 -X (NMP@NCMT-X, where X indicates the different amounts of Mg2+ and PO4 3- ). NaMgPO4 acts as a special ionic conductivity channel on the surface to improve the kinetics of the electrode reactions, remarkably improving the rate capability of the modified cathode at a high current density in the half-cell. Additionally, NMP@NCMT-2 enables a reversible phase transition from the P3 to OP2 phase in the charge-discharge process above 4.2 V and achieves a high specific capacity of 157.3 mAh g-1 and outstanding capacity retention in the full cell. The strategy can effectively and reliably stabilize the interface and improve the performance of layered cathodes for Na-ion batteries (NIBs).
RESUMO
L-Cysteine capped CdTe nanoparticles (NPs) were synthesized in aqueous medium, and their application as fluorescence probes in the determination of paracetamol was studied. The L-cysteine capped CdTe NPs were characterized by transmission electron microscopy, X-ray diffraction spectrometry, spectrofluorometry, ultraviolet-visible and Fourier transform infrared spectrometry. Based on the distinct fluorescence quenching of CdTe fluorescence probes in the presence of paracetamol, a simple, rapid and specific method for paracetamol determination was presented. Under optimum conditions, the relative fluorescence intensity of CdTe NPs was linearly proportional to paracetamol concentration from 1.0 × 10(-8) mol/L to 1.6 × 10(-7) mol/L with a detection limit of 4.2 × 10(-9) mol/L. The proposed method was applied to detect paracetamol in commercial tablets with satisfactory results.
Assuntos
Acetaminofen/análise , Compostos de Cádmio/química , Corantes Fluorescentes/química , Luminescência , Telúrio/química , Compostos de Cádmio/síntese química , Cisteína/química , Corantes Fluorescentes/síntese química , Nanopartículas/química , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Potassium ion batteries (KIBs) have emerged as a promising energy storage system, but the stability and high rate capability of their electrode materials, particularly carbon as the most investigated anode ones, become a primary challenge. Here, it is identified that pitch-derived soft carbon, a nongraphitic carbonaceous species which is paid less attention in the battery field, holds special advantage in KIB anodes. The structural flexibility of soft carbon makes it convenient to tune its crystallization degree, thereby modulating the storage behavior of large-sized K+ in the turbostratic carbon lattices to satisfy the need in structural resilience, low-voltage feature, and high transportation kinetics. It is confirmed that a simple thermal control can produce structurally optimized soft carbon that has much better battery performance than its widely reported carbon counterparts such as graphite and hard carbon. The findings highlight the potential of soft carbon as an interesting category suitable for high-performance KIB electrode and provide insights for understanding the complicated K+ storage mechanisms in KIBs.
RESUMO
Sodium-ion batteries have captured widespread attention for grid-scale energy storage owing to the natural abundance of sodium. The performance of such batteries is limited by available electrode materials, especially for sodium-ion layered oxides, motivating the exploration of high compositional diversity. How the composition determines the structural chemistry is decisive for the electrochemical performance but very challenging to predict, especially for complex compositions. We introduce the "cationic potential" that captures the key interactions of layered materials and makes it possible to predict the stacking structures. This is demonstrated through the rational design and preparation of layered electrode materials with improved performance. As the stacking structure determines the functional properties, this methodology offers a solution toward the design of alkali metal layered oxides.
RESUMO
Nitrogen-doped hierarchical porous carbon (CNx-Co) samples embedded with cobalt nanoparticles are selectively prepared with polyethylenimine (PEI) as both the carbon and nitrogen sources. By processing at different temperature, CNx-Co-800 and CNx-Co-1000 are selectively prepared and the materials exhibit excellent electrocatalytic activity in the oxygen reduction reaction (ORR). The ORR measurements show that sample processed at the higher temperature delivers better performance due to the larger Co and graphitic nitrogen concentrations. CNx-Co-1000 also shows more tolerance against methanol crossover and outstanding durability towards ORR, making it a promising Pt-free electrocatalyst for ORR under alkaline conditions. The method demonstrated here is a general strategy to prepare other metal or metal alloy/porous carbon hybrid materials.