Characterization of Magnesium-Polylactic Acid Films Casted on Different Substrates and Doped with Diverse Amounts of CTAB.

Polylactic acid (PLA) is a good candidate for the manufacture of polymeric biodegradable biomaterials. The inclusion of metallic particles and surfactants solves its mechanical limitations and improves its wettability, respectively. In this work, cetyltrimethylammonium bromide (CTAB) and magnesium particles have been incorporated into PLA films to evaluate the changes produced in the polymeric matrix cast on glass and silicone substrates. For this purpose, the surface of the films has been characterized by means of contact angle measurements and ToF-SIMS. Depth profiles and SEM images of the cross sections of the films have also been obtained to study their morphology. The results show that the CTAB in the polymer matrix with and without magnesium improves the wettability of the films, making them more suitable for cell adhesion. The higher the hydrophilicity, the higher the surfactant concentration. The depth profiles show, for the first time, that, depending on the surfactant concentration and the presence of Mg, there is a layer-like distribution near the surface where, in addition to the CTAB + PLA mixture, a surfactant exclusion zone can be seen. This new structure could be relevant in in vitro/in vivo situations when the degradation processes remove the film components in a sequential form.

Synthesis and antiproliferative activity of new 2-glyco-3-nitro-2H-chromenes.

3-nitro-2H-chromenes and derivatives are compounds with diverse biological activity, among them, new 2-glyco-3-nitro-2H-chromenes have been prepared by one-pot oxa-Michael-Henry-dehydration reactions between carbohydrate-derived nitroalkenes and several salicylaldehydes, using a minimal amount of solvent and DBU as catalyst. The antiproliferative activity of these new compounds has been evaluated against a panel of six human solid tumor cell lines, and compared to pharmacological reference compounds, finding that their activities are in the low micromolar range and that some of them are more effective than the standards.

Synthesis and antiproliferative activity of peracetylated 2-amino-1,2-dideoxy-1-nitro-d-glycero-l-manno and d-glycero-d-talo heptitols.

Michael additions between carbohydrate derived nitroalkenes and several aliphatic and aromatic amines proceeded in a stereoselective way, leading to peracetylated 2-amino-1,2-dideoxy-1-nitro-heptitols. In addition, the antiproliferative activity of some of the new adducts has been studied. The results allowed to identify lead compounds which show GI50 values in the range 1.7-19µM.

Bacterial Response to the Surface Aging of PLA Matrices Loaded with Active Compounds.

The use of active components in biomaterials improves the properties of existing ones and makes it possible to obtain new devices with antibacterial properties that prevent infections after implantation, thus guaranteeing the success of the implant. In this work, cetyltrimethylammonium bromide (CTAB) and magnesium particles were incorporated into polylactic acid (PLA) films to assess the extent to which progressive aging of the new surfaces resists bacterial colonization processes. For this purpose, the films' surface was characterized by contact angle measurements, ToF-SIMS and AFM, and adhesion, viability and biofilm growth of Staphylococcus epidermidis bacteria on these films were also evaluated. The results show that the inclusion of Mg and CTAB in PLA films changes their surface properties both before and after aging and also modifies bacterial adhesion on the polymer. Complete bactericidal activity is exhibited on non-degraded films and films with CTAB. This antibacterial behavior is maintained after degradation for three months in the case of films containing a higher amount of CTAB.

Influence of Solvent and Substrate on Hydrophobicity of PLA Films.

The study of the surface properties of materials is key in determining whether the material will be suitable for medical purposes. One of these properties is hydrophobicity, which is important when assessing its behavior against bacterial adhesion. In this work, we have studied the influence of the solvent (chloroform, acetone, and tetrahydrofuran) and the substrate (glass, PTFE, silicone, and Ti6Al4V) on which polylactic acid is deposited in solution to manufacture films by solvent-casting. Thus, it has been found that there are no significant differences in hydrophobicity and surface tension among the solvents evaluated, but there are significant differences with respect to the substrates: PLA films casted on silicone are hydrophobic, while those casted on the rest of the substrates are hydrophilic. This is related to the fact that the silicone interacts with the polymer modifying its spatial arrangement, exposing its methyl groups towards the interface with the air. In this way, it has been shown that, when manufacturing PLA films, it is important to choose the right surface on which to deposit them, depending on their desired function.

The role of magnesium in biomaterials related infections.

Magnesium is currently increasing interest in the field of biomaterials. An extensive bibliography on this material in the last two decades arises from its potential for the development of biodegradable implants. In addition, many researches, motivated by this progress, have analyzed the performance of magnesium in both in vitro and in vivo assays with gram-positive and gram-negative bacteria in a very broad range of conditions. This review explores the extensive literature in recent years on magnesium in biomaterials-related infections, and discusses the mechanisms of the Mg action on bacteria, as well as the competition of Mg2+ and/or synergy with other divalent cations in this subject.