Dual Stealth Functional Immuno-magnetic Nanoparticles for High-Performance Isolation of Circulating Tumor Cells.

As a biomarker of hepatocellular carcinoma (HCC) biopsy, circulating tumor cells (CTCs) are often used in the diagnosis of cancer and treatment guidance. For CTCs detection, immuno-magnetic nanoparticles (IMNs) are one of the most commonly used platforms. However, the nonspecific adsorption of proteins and non-tumor cells weakens the performance of IMNs to capture CTCs. In this work, we developed an IMNs platform which was constructed by a biomimetic protein corona precoating and a polyethylene glycol (PEG) spacer to form the PEG and corona-coated IMNs (IP-CMNs). Due to the dual stealth effect of protein corona precoating and PEG spacer, the nonspecific protein adsorption and cell binding of P-CMNs could reduce by ∼5.5- and ∼5.4-fold, respectively, compared with those of unmodified particles. Furthermore, the PEG spacer could not only reduce the interaction between IP-CMNs and leukocytes but also enhance the capture performance toward tumor cells. By using artificial blood samples, the capture efficiency of IP-CMNs toward rare CTCs was found to be 88.3%, while it was 70.5% by using commercial IMNs. Finally, CTCs were successfully isolated in all HCC patient blood samples (7/7) using IP-CMNs. These results provide insight into the use of the multifunctional nanoplatform as a useful tool for CTCs detection.

Clinical characteristics of patient with GFAP-IgG: a review of 31 patients from two tertiary referral centers in China.

OBJECTIVE: This study presents a comprehensive analysis of the clinical characteristics of 31 patients exhibiting cerebrospinal fluid (CSF) and/or serum positivity for GFAP-IgG, with a specific emphasis on 24 cases demonstrating only GFAP-IgG positivity. The investigation thoroughly evaluates their clinical, radiological, and laboratory features, as well as treatment responses, with the objective of offering clinicians potential diagnostic and therapeutic approaches. METHODS: A total of 31 patients with GFAP-IgG in the CSF and/or serum were registered between August 2016 and August 2021 at the General Hospital of Ningxia Medical University and Huashan Hospital of Fudan University. We retrospectively reviewed their clinical records. RESULTS: Overall, the patients were positive with GFAP-IgG in their CSF (15/31), in serum (6/31), and both CSF and serum (10/31). Among them, two were eventually diagnosed with astroglioma and primary central nervous system lymphoma, respectively; one patient had typical multiple sclerosis; three exhibited overlapping GFAP-IgG and aquaporin-4-IgG (AQP4-IgG); and one patient was coexisting N-methyl-D-aspartate receptor IgG. The remaining 24 patients were only GFAP-IgG positive. In total, 22 out of the 24 patients had abnormal MRI outcomes, involving the brain, meninges, and spinal cord. Besides, seven of the 24 patients developed optic neuritis. The CSF protein levels positively correlated with the Expanded Disability Status Scale score (EDSSs). Significantly decreased EDSSs, modified Rankin Scale score, GFAP-IgG titer, CSF protein level, and CSF white blood cell counts were observed after immunomodulatory therapy. CONCLUSION: The clinical manifestations of GFAP-IgG exhibit a wide range of phenotypes that lack specificity. These findings emphasize the significance of not exclusively relying on the presence of antibodies to diagnose GFAP-A, but rather integrating them with the clinical phenotypes. GFAP-IgG testing enables the diagnosis of autoimmune GFAP astrocytopathy, a treatable autoimmune disease affecting the central nervous system. This condition provides opportunities for investigating innovative mechanisms of CNS autoimmunity and inflammation.

Comparative study of electro-Fenton and photoelectro-Fenton processes using a novel photocatalytic fuel cell electro-Fenton system with g-C3 N4 @N-TiO2 and Ag/CNT@CF as electrodes.

In this study, a novel photocatalytic fuel cell electro-Fenton (PFC-EF) system was constructed using g-C3 N4 @N-TNA and Ag/CNT@CF as electrodes. The composition, structure, and morphology of the electrodes were obtained. The g-C3 N4 @N-TNA, with its 2.37 eV band gap and 100 mV photovoltage, has excellent excitation properties for sunlight. Ag/CNT@CF with abundant pores, CNT 3D nanostructures, and Ag crystals on the surface can improve the electro-Fenton efficiency. A comparative study of rhodamine B (RhB) degradation was performed in this system. It has been shown that electric fields can greatly enhance the oxidation efficiency of both anode photocatalysis and the cathode electro-Fenton process. Under optimal conditions, RhB can be completely removed by the photoelectro-Fenton (PEF) process. The energy consumption of the PEF system was obtained. The electrical energy per order (EE/O) is only 9.2 kWh/m3 ·order, which is only 16.5% of EF and 2.2% of PFC-EF system. The mineralization current efficiency (MCE) of the PEF system reached 93.3% for a 2-h reaction. Therefore, the PEF system has the advantage of saving energy. The kinetic analysis shows that the RhB removal follows a first-order kinetic law, and the reaction rate constant reaches 0.1304 min-1 , which is approximately 5.2 times larger and 4.0 times larger than the electro-Fenton and PFC-EF processes, respectively. RhB removal is a coupling multimechanism in which an electric field enhances photoelectron migration, Ag loading improves H2 O2 generation, UV light coupled with H2 O2 promotes hydroxyl radical (Ù OH) generation, and the nanoconfinement effect of CNTs promotes Ù OH accumulation in favor of RhB degradation. PRACTITIONER POINTS: Novel efficiency photocatalytic fuel cell electro-Fenton system was constructed. The electric field greatly enhances the photocatalytic fuel cell electro-Fenton system. Multiple coupling mechanisms of UV/H2O2, UV/Fenton and photo-electro-Fenton have been revealed.

TiO2/Polystyrene Nanocomposite Antibacterial Material as a Hemoperfusion Adsorbent for Efficient Bilirubin Removal and Prevention of Bacterial Infection.

The use of hemoperfusion adsorbents for the removal of bilirubin in patients with liver failure has become a critical treatment. However, the insufficient clearance of bilirubin and the possibility of bacterial infection during hemoperfusion limit the application. In this work, we designed a novel antibacterial bilirubin adsorbent (PSVT) through the suspension polymerization reaction between double-bond functionalized TiO2 nanoparticles and styrene. PSVT showed an excellent bilirubin adsorption ability and antibacterial performance, ensuring efficient clearance of bilirubin in liver failure patients during hemoperfusion and preventing bacterial infection. The experimental results indicated that TiO2 was uniformly dispersed in the microspheres, which improved the mesoporous structure and increased the specific surface area. Composite adsorbent PSVT showed an exceptional bilirubin adsorption capacity, with the maximum adsorption capacity reaching 24.3 mg/g. In addition, the introduction of TiO2 endowed PSVT with excellent antibacterial ability; the ultimate antibacterial rates against Escherichia coli and Staphylococcus aureus reached 97.31 and 96.47%, respectively. In summary, PSVT served as a novel antibacterial bilirubin adsorbent with excellent bilirubin clearance capacity and antibacterial performance, providing excellent application prospects for treating liver failure patients.

Peripheral nerve injury associated with JEV infection in high endemic regions, 2016-2020: a multicenter retrospective study in China.

Previously, we reported a cohort of Japanese encephalitis (JE) patients with Guillain-Barré syndrome. However, the evidence linking Japanese encephalitis virus (JEV) infection and peripheral nerve injury (PNI) remains limited, especially the epidemiology, clinical presentation, diagnosis, treatment, and outcome significantly differ from traditional JE. We performed a retrospective and multicenter study of 1626 patients with JE recorded in the surveillance system of the Chinese Center for Disease Control and Prevention, spanning the years 2016-2020. Cases were classified into type 1 and type 2 JE based on whether the JE was combined with PNI or not. A comparative analysis was conducted on demographic characteristics, clinical manifestations, imaging findings, electromyography data, laboratory results, and treatment outcomes. Among 1626 laboratory confirmed JE patients, 230 (14%) were type 2 mainly located along the Yellow River in northwest China. In addition to fever, headache, and disturbance of consciousness, type 2 patients experienced acute flaccid paralysis of the limbs, as well as severe respiratory muscle paralysis. These patients presented a greater mean length of stay in hospital (children, 22 years [range, 1-34]; adults, 25 years [range, 0-183]) and intensive care unit (children, 16 years [range, 1-30]; adults, 17 years [range, 0-102]). The mortality rate was higher in type 2 patients (36/230 [16%]) compared to type 1 (67/1396 [5%]). The clinical classification of the diagnosis of JE may play a crucial role in developing a rational treatment strategy, thereby mitigating the severity of the disease and potentially reducing disability and mortality rates among patients.

Biomembrane-mimetic hemoperfusion adsorbent for efficient removal of low-density lipoprotein from hyperlipemia blood.

Lowering of low-density lipoprotein (LDL) levels in blood of patients with hyperlipidaemia can effectively prevent the progression of atherosclerosis and coronary heart disease. The present study demonstrated a facile synthesis strategy to prepare biomembrane-mimetic LDL adsorbent (PVA@COOH-PE) via directional immobilization of phospholipid onto macro-porous cross-linked poly(vinyl alcohol) spheres. The binding between the prepared adsorbent and LDL particles simulates the cytosolic lipid droplets to form a lipid-packing structure. The adsorbent possesses satisfactory removal efficiency for LDL and total cholesterol (TCH) in hyperlipemia serum, while remains high-density lipoprotein (HDL) concentration within the normal range. The adsorption capacities for LDL and TCH are about 1.13 and 1.74 mg/ml respectively, which are nearly three and four times higher than that of HDL (0.42 mg/ml). The adsorbent also possesses satisfactory anticoagulant properties, causes negligible effect on blood cells and produces low hemolysis ratios. The excellent blood compatibility plus LDL removal efficiency of PVA@COOH-PE indicates its good application prospect as hemoperfusion adsorbent in the treatment of hyperlipidaemia.

Amphiphilic shell nanomagnetic adsorbents for selective and highly efficient capture of low-density lipoprotein from hyperlipidaemia serum.

Removal of low-density lipoprotein (LDL) from hyperlipemia patients' blood represents an effective approach to prevent the progression of atherosclerotic cardiovascular disease. Based on the LDL structural characteristics and intermolecular interactions, a tailored nano-adsorbent (Fe3O4@SiO2@PAA-PE) was prepared aimed at the removal of LDL from hyperlipemia serum with high selectivity. The core-shell structured magnetic nanoparticles were embedded in an amphiphilic layer composed of hydrophilic poly(acrylic acid) and lipophilic phospholipids to provide multifunctional binding for LDL particles. The results of dynamic light scattering, water contact angle and zeta-potential measurements, thermal gravimetric analysis, and X-ray photoelectron spectroscopy together with Fourier transform infrared spectroscopy confirmed the core-shell structured nanoparticles bearing amphiphilic poly acrylic acid and phospholipid molecules. Because of the superior electronegativity of the functional layer, the nano-adsorbent demonstrated favorable adsorption selectivity against high-density lipoprotein, which possesses a similar structure to LDL but has a cardio-protective function in the human body. The respective adsorption capacity of Fe3O4@SiO2@PAA-PE towards LDL, total cholesterol and triglycerides reached up to 6.26 mg g-1, 8.41 mg g-1 and 9.19 mg g-1, which was 7.03, 9.45 and 10.32 times that towards HDL (0.89 mg g-1). The kinetic and isothermal studies revealed that multiple interactions containing both physical and chemical adsorption occurred in the binding procedure between LDL and Fe3O4@SiO2@PAA-PE, and chemical adsorption may play a more predominant role in LDL adsorption. The nano-adsorbent also had negligible effects on blood cells, and possessed satisfactory recyclability, low cytotoxicity and hemolysis ratios, indicating its good application prospects as a hemoperfusion adsorbent in the treatment of hyperlipidaemia.

Protein corona-coated immunomagnetic nanoparticles with enhanced isolation of circulating tumor cells.

Immunomagnetic nanoparticles (IMNs) have been widely developed as a detection tool to isolate rare circulating tumor cells (CTCs) from whole blood as a potential method for early cancer diagnosis, metastasis examination, and treatment guidance. However, a spontaneous interaction between nanoparticles and proteins results in the formation of a protein corona that reduces the performance of IMNs when they enter body fluids. To address this issue, the protein corona was precoated onto magnetic nanoparticles (C-MNs), and then their surfaces were conjugated with an immuno-antibody. The adsorption of proteins on C-MNs was decreased 6-fold and non-specific cell binding was reduced 5-fold, compared with magnetic nanoparticles (MNs). Furthermore, the immuno-antibody functionalized C-MNs (IC-MNs) maintained highly specific CTC capture performance when exposed to blood plasma. By using artificial spiked blood samples, IC-MNs exhibited 90.2% CTC isolation efficiency, compared with 60.3% by using IMNs. IC-MNs also successfully captured CTCs with high purity in 24 out of 26 female breast cancer patient blood samples. This work demonstrated that a novel preformed protein corona strategy can provide a useful clinically applicable diagnostic tool.

Photorenewable Azobenzene Polymer Brush-Modified Nanoadsorbent for Selective Adsorption of LDL in Serum.

The elevated concentration of low-density lipoprotein (LDL) is recognized as a leading factor of hyperlipidemia (HLP), and selective adsorption of serum LDL is regarded as a practical therapy. Based on the superior structure-function characteristics of stimuli-responsive materials, a photorenewable nanoadsorbent (SiO2@Azo@Gly) with high selectivity and reusability was developed using azobenzene as the functional ligand. Its principle was certified by the preparation of silicon nanoparticles with atom transfer radical polymerization (ATRP)-initiating groups via a sol-gel reaction and their subsequent grafting of azobenzene polymer brushes by surface-initiated ATRP, followed by modification with glycine. Immobilization of carboxylated azobenzene polymer brushes onto the nanoparticles endowed SiO2@Azo@Gly with high adsorption selectivity and reusability. The advanced nanoadsorbent exhibited excellent LDL adsorption capacity at about 27 mg/g and could be regenerated by illumination with high efficiency (circulations ≥ 5); this was further verified by transmission electron microscopy (TEM) and Fourier-transform infrared (FTIR) analysis. SiO2@Azo@Gly also demonstrated superior adsorption efficiency and selectivity in serum from HLP patients, the respective adsorption capacities of LDL, triglyceride, and total cholesterol were about 15.65, 24.48, and 28.36 mg/g, and the adsorption to high-density lipoprotein (cardioprotective effect) was only about 3.66 mg/g. Green regeneration of the nanoadsorbent could be achieved completely through a simple photoregeneration process, and the recovery rate was still 97.9% after five regeneration experiments.

Bio-inspired dual-functional phospholipid-poly(acrylic acid) brushes grafted porous poly(vinyl alcohol) beads for selective adsorption of low-density lipoprotein.

Elevated levels of low-density lipoproteins (LDL) are recognized as a crucial indicator of hyperlipidemia (HLP) and lowering of LDL levels represents an effective clinical treatment strategy. Inspired by the conjugation of phospholipid monolayers and the lipid content of the LDL particle, the current study describes the preparation of an innovative hemoperfusion adsorbent. The adsorbent was prepared by attachment of phosphatidyl ethanolamine to poly(acrylic acid) modified poly(vinyl alcohol-co-triallyl isocyanurate) beads (PVA@PAA-PE). The interaction between LDL and adsorbent mimics the lipoprotein microemulsion present in the blood and thus promotes efficient binding with high affinity. In vitro adsorption using serum from patients with HLP revealed that the LDL adsorption of PVA@PAA-PE was 4.44 times higher than that of controls and the removal rate of LDL using PVA@PAA-PE was about twice as high as that of the anti-atherogenic high-density lipoprotein (HDL). In vivo whole blood perfusion demonstrated the superior affinity of PVA@PAA-PE for LDL since LDL concentration was significantly reduced from 10.71 ± 2.36 mmol L-1 to 6.21 ± 1.45 mmol L-1, while the HDL level was not severely reduced (from 0.98 ± 0.12 mmol L-1 to 0.56 ± 0.15 mmol L-1). Additionally, PVA@PAA-PE exhibited excellent hemocompatibility and low cytotoxicity. Therefore, PVA@PAA-PE is a potential adsorbent for whole blood perfusion to treat hyperlipidemia.

[Outer membrane protein 31 of B. melitensis induces the formation of autophagosomes in BV-2 microglia cells].

Objective To determine the influence of outer membrane protein 31 (Omp31) of B. melitensis on the formation of autophagosomes in BV-2 microglia cells. Methods BV-2 cells were treated for 6 hours with Omp31 at 0.17, 0.50, 1.50, 4.50, 13.50 µg/mL. Real-time quantitative PCR was used to detect the expression of microtubule associated protein 1 light chain 3B (LC3B) mRNA; Western blotting was applied to detect the expressions of LC3B II and LC3B proteins; transmission electron microscopy was performed to observe cell autophagy in each group. The levels of tumor necrosis factor α (TNF-α), interleukin 6 (IL-6) and IL-10 in the culture cell supernatant were determined with ELISA. Results Omp31 treatment resulted in an increase in the level of LC3B II protein, especially the most obvious increase in the ones treated by 0.5 µg/mL Omp31. The concentration of Omp31, being no more than 0.5 µg/mL, could promote the expression of LC3B mRNA, while more than 0.5 µg/mL Omp31, it could inhibit the expression of LC3B mRNA; 0.5 µg/mL Omp31 could induce the formation of more autophagosomes in BV-2 cells. Omp31 promoted the expressions of TNF-α and IL-6, and inhibited the expression of IL-10 in BV-2 cells. Conclusion Omp31 at the concentration of 0.5 µg/mL can significantly induce autophagy in BV-2 cells.

An Empirical Study of Design Parameters for Assessing Differential Impacts for Students in Group Randomized Trials.

BACKGROUND: Prior research has investigated design parameters for assessing average program impacts on achievement outcomes with cluster randomized trials (CRTs). Less is known about parameters important for assessing differential impacts. OBJECTIVES: This article develops a statistical framework for designing CRTs to assess differences in impact among student subgroups and presents initial estimates of critical parameters. RESEARCH DESIGN: Effect sizes and minimum detectable effect sizes for average and differential impacts are calculated before and after conditioning on effects of covariates using results from several CRTs. Relative sensitivities to detect average and differential impacts are also examined. SUBJECTS: Student outcomes from six CRTs are analyzed. MEASURES: Achievement in math, science, reading, and writing. RESULTS: The ratio of between-cluster variation in the slope of the moderator divided by total variance-the "moderator gap variance ratio"-is important for designing studies to detect differences in impact between student subgroups. This quantity is the analogue of the intraclass correlation coefficient. Typical values were .02 for gender and .04 for socioeconomic status. For studies considered, in many cases estimates of differential impact were larger than of average impact, and after conditioning on effects of covariates, similar power was achieved for detecting average and differential impacts of the same size. CONCLUSIONS: Measuring differential impacts is important for addressing questions of equity, generalizability, and guiding interpretation of subgroup impact findings. Adequate power for doing this is in some cases reachable with CRTs designed to measure average impacts. Continuing collection of parameters for assessing differential impacts is the next step.