High-Frequency Fe-H Vibrations in a Bridging Hydride Complex Characterized by NRVS and DFT.

High-spin iron species with bridging hydrides have been detected in species trapped during nitrogenase catalysis, but there are few general methods of evaluating Fe-H bonds in high-spin multinuclear iron systems. An 57 Fe nuclear resonance vibrational spectroscopy (NRVS) study on an Fe(µ-H)2 Fe model complex reveals Fe-H stretching vibrations for bridging hydrides at frequencies greater than 1200 cm-1 . These isotope-sensitive vibrational bands are not evident in infrared (IR) spectra, showing the power of NRVS for identifying hydrides in this high-spin iron system. Complementary density functional theory (DFT) calculations elucidate the normal modes of the rhomboidal iron hydride core.

C-H and C-N Activation at Redox-Active Pyridine Complexes of Iron.

Pyridine activation by inexpensive iron catalysts has great utility, but the steps through which iron species can break the strong (105-111 kcal mol-1 ) C-H bonds of pyridine substrates are unknown. In this work, we report the rapid room-temperature cleavage of C-H bonds in pyridine, 4-tert-butylpyridine, and 2-phenylpyridine by an iron(I) species, to give well-characterized iron(II) products. In addition, 4-dimethylaminopyridine (DMAP) undergoes room-temperature C-N bond cleavage, which forms a dimethylamidoiron(II) complex and a pyridyl-bridged tetrairon(II) square. These facile bond-cleaving reactions are proposed to occur through intermediates having a two-electron reduced pyridine that bridges two iron centers. Thus, the redox non-innocence of the pyridine can play a key role in enabling high regioselectivity for difficult reactions.

Alkali-Controlled C-H Cleavage or N-C Bond Formation by N2-Derived Iron Nitrides and Imides.

Formation of N-H and N-C bonds from functionalization of N2 is a potential route to utilization of this abundant resource. One of the key challenges is to make the products of N2 activation reactive enough to undergo further reactions under mild conditions. This paper explores the strategy of "alkali control," where the presence of an alkali metal cation enables the reduction of N2 under mild conditions, and then chelation of the alkali metal cation uncovers a highly reactive species that can break benzylic C-H bonds to give new N-H and Fe-C bonds. The ability to "turn on" this C-H activation pathway with 18-crown-6 is demonstrated with three different N2 reduction products of N2 cleavage in an iron-potassium system. The alkali control strategy can also turn on an intermolecular reaction of an N2-derived nitride with methyl tosylate that gives a new N-C bond. Since the transient K(+)-free intermediate reacts with this electrophile but not with the weak C-H bonds in 1,4-cyclohexadiene, it is proposed that the C-H cleavage occurs by a deprotonation mechanism. The combined results demonstrate that a K(+) ion can mask the latent nucleophilicity of N2-derived nitride and imide ligands within a trimetallic iron system and points a way toward control over N2 functionalization.

A multi-iron system capable of rapid N2 formation and N2 cleavage.

The six-electron oxidation of two nitrides to N2 is a key step of ammonia synthesis and decomposition reactions on surfaces. In molecular complexes, nitride coupling has been observed with terminal nitrides, but not with bridging nitride complexes that more closely resemble catalytically important surface species. Further, nitride coupling has not been reported in systems where the nitrides are derived from N2. Here, we show that a molecular diiron(II) diiron(III) bis(nitride) complex reacts with Lewis bases, leading to the rapid six-electron oxidation of two bridging nitrides to form N2. Surprisingly, these mild reagents generate high yields of iron(I) products from the iron(II/III) starting material. This is the first molecular system that both breaks and forms the triple bond of N2 at room temperature. These results highlight the ability of multi-iron species to decrease the energy barriers associated with the activation of strong bonds.

Synthesis, spectroscopy, and hydrogen/deuterium exchange in high-spin iron(II) hydride complexes.

Very few hydride complexes are known in which the metals have a high-spin electronic configuration. We describe the characterization of several high-spin iron(II) hydride/deuteride isotopologues and their exchange reactions with one another and with H2/D2. Though the hydride/deuteride signal is not observable in NMR spectra, the choice of isotope has an influence on the chemical shifts of distant protons in the dimers through the paramagnetic isotope effect on chemical shift. This provides the first way to monitor the exchange of H and D in the bridging positions of these hydride complexes. The rate of exchange depends on the size of the supporting ligand, and this is consistent with the idea that H2/D2 exchange into the hydrides occurs through the dimeric complexes rather than through a transient monomer. The understanding of H/D exchange mechanisms in these high-spin iron hydride complexes may be relevant to postulated nitrogenase mechanisms.

Cobalt-Magnesium and Iron-Magnesium Complexes with Weakened Dinitrogen Bridges.

The cooperative binding of N2 by late transition metals and main-group metals is a promising strategy for N-N bond weakening and activation. We report the use of activated Rieke magnesium for reduction of iron and cobalt complexes supported by bulky ß-diketiminate ligands. Binding of N2 is accompanied by assembly of a linear M-NN-Mg-NN-M (M = Co, Fe) core with N-N bonds that are weakened, as judged by infrared spectroscopy. Both the cobalt and iron complexes require THF solvent, because of Mg-THF binding. The cobalt complex can be isolated as a pure solid, but the iron complex is stable only in solution. These results demonstrate the correlation between the binding mode and N-N weakening in heterobimetallic N2 complexes.

Dynamic effects on ligand field from rapid hydride motion in an iron(ii) dimer with an S = 3 ground state.

Hydride complexes are important in catalysis and in iron-sulfur enzymes like nitrogenase, but the impact of hydride mobility on local iron spin states has been underexplored. We describe studies of a dimeric diiron(ii) hydride complex using X-ray and neutron crystallography, Mössbauer spectroscopy, magnetism, DFT, and ab initio calculations, which give insight into the dynamics and the electronic structure brought about by the hydrides. The two iron sites in the dimer have differing square-planar (intermediate-spin) and tetrahedral (high-spin) iron geometries, which are distinguished only by the hydride positions. These are strongly coupled to give an S total = 3 ground state with substantial magnetic anisotropy, and the merits of both localized and delocalized spin models are discussed. The dynamic nature of the sites is dependent on crystal packing, as shown by changes during a phase transformation that occurs near 160 K. The change in dynamics of the hydride motion leads to insight into its influence on the electronic structure. The accumulated data indicate that the two sites can trade geometries by rotating the hydrides, at a rate that is rapid above the phase transition temperature but slow below it. This small movement of the hydrides causes large changes in the ligand field because they are strong-field ligands. This suggests that hydrides could be useful in catalysis not only due to their reactivity, but also due to their ability to rapidly modulate the local electronic structure and spin states at metal sites.

Reversible C-C bond formation between redox-active pyridine ligands in iron complexes.

This manuscript describes the formally iron(I) complexes L(Me)Fe(Py-R)(2) (L(Me) = bulky ß-diketiminate; R = H, 4-tBu), in which the basal pyridine ligands preferentially accept significant unpaired spin density. Structural, spectroscopic, and computational studies on the complex with 4-tert-butylpyridine ((tBu)py) indicate that the S = 3/2 species is a resonance hybrid between descriptions as (a) high-spin iron(II) with antiferromagnetic coupling to a pyridine anion radical and (b) high-spin iron(I). When the pyridine lacks the protection of the tert-butyl group, it rapidly and reversibly undergoes radical coupling reactions that form new C-C bonds. In one reaction, the coordinated pyridine couples to triphenylmethyl radical, and in another, it dimerizes to give a pyridine-derived dianion that bridges two iron(II) ions. The rapid, reversible C-C bond formation in the dimer stores electrons from the formally reduced metal as a C-C bond in the ligands, as demonstrated by using the coupled diiron(II) complex to generate products that are known to come from iron(I) precursors.

Reactivity of Cr(III) µ-oxo compounds: catalyst regeneration and atom transfer processes.

Oxidation of CpCr[(XylNCMe)(2)CH] (Xyl = 2,6-Me(2)C(6)H(3)) with pyridine N-oxide or air generated the µ-oxo dimer, {CpCr[(XylNCMe)(2)CH]}(2)(µ-O). The µ-oxo dimer was converted to paramagnetic Cr(III) CpCr[(XylNCMe)(2)CH](X) complexes (X = OH, O(2)CPh, Cl, OTs) via protonolysis reactions. The related Cr(III) alkoxide complexes (X = OCMe(3), OCMe(2)Ph) were prepared by salt metathesis and characterized by single crystal X-ray diffraction. The interconversion of the Cr(III) complexes and their reduction back to Cr(II) with Mn powder were monitored using UV-vis spectroscopy. The related CpCr[(DepNCMe)(2)CH] (Dep = 2,6-Et(2)C(6)H(3)) Cr(II) complex was studied for catalytic oxygen atom transfer reactions with PPh(3) using O(2) or air. Both Cr(II) complexes reacted with pyridine N-oxide and γ-terpinene to give the corresponding Cr(III) hydroxide complexes. When CpCr[(DepNCMe)(2)CH] was treated with pyridine N-oxide in benzene in the absence of hydrogen atom donors, a dimeric Cr(III) hydroxide product was isolated and structurally characterized, apparently resulting from intramolecular hydrogen atom abstraction of a secondary benzylic ligand C-H bond followed by intermolecular C-C bond formation. The use of very bulky hexaisopropylterphenyl ligand substituents did not preclude the formation of the analogous µ-oxo dimer, which was characterized by X-ray diffraction. Attempts to develop a chromium-catalyzed intermolecular hydrogen atom transfer process based on these reactions were unsuccessful. The protonolysis and reduction reactions of the µ-oxo dimer were used to improve the previously reported Cr-catalyzed radical cyclization of a bromoacetal.

Exploring chromium(III)-alkyl bond homolysis with CpCr[(ArNCMe)2CH](R) complexes.

A range of paramagnetic Cr(III) monohydrocarbyl complexes CpCr[(ArNCMe)2CH](R) (Ar = ortho-disubstituted aryl; R = primary alkyl, trimethylsilylmethyl, benzyl, phenyl, alkenyl, or alkynyl) were synthesized to investigate how varying the steric and electronic properties of the R group affected their propensity for Cr-R bond homolysis. Most complexes were prepared by salt metathesis of known CpCr[(ArNCMe)2CH](Cl) compounds in Et2O with commercial RMgCl solutions, although more sterically demanding combinations of Ar and R groups necessitated the use of halide-free MgR2 reagents and the Cr(III) tosylate or triflate derivatives. Alternative synthetic routes to Cr(III)-R species using the previously reported Cr(II) compounds CpCr[(ArNCMe)2CH] and sources of R· radicals (e.g., BEt3 and air) were also explored. The UV-vis spectra of the CpCr[(ArNCMe)2CH](R) complexes possessed two strong bands with maximum absorbances in the ranges 395-436 nm and 535-582 nm, with the band in the latter range being particularly characteristic of the Cr(III)-R compounds. The Cr-CH2R bond lengths as determined by single-crystal X-ray diffraction were longer than those in the corresponding Cr-CH3 complexes, typically falling in the range 2.10 to 2.13 Å. The Cr(III) benzyl compounds displayed longer Cr-CH2Ph distances, while the bond lengths for the alkenyl and alkynyl species were substantially shorter. The rate of Cr-R bond homolysis at room temperature was determined by monitoring the reaction of Cr(III) neopentyl, benzyl, and isobutyl complexes with excess PhSSPh using UV-vis spectroscopy. Although the other primary alkyl, phenyl, and alkenyl compounds did not undergo appreciable homolysis under these conditions, they were cleanly converted to CpCr[(ArNCMe)2CH](SPh) by photolysis.

Masked Radicals: Iron Complexes of Trityl, Benzophenone, and Phenylacetylene.

We report the first Fe─CPh3 complex, and show that the long Fe─C bond can be disrupted by neutral π-acceptor ligands (benzophenone and phenylacetylene) to release the triphenylmethyl radical. The products are formally iron(I) complexes, but X-ray absorption spectroscopy coupled with density functional and multireference ab initio calculations indicates that the best description of all the complexes is iron(II). In the formally iron(I) complexes, this does not imply that the π-acceptor ligand has radical character, because the iron(II) description arises from doubly-occupied frontier molecular orbitals that are shared equitably by the iron and the π-acceptor ligand, and the unpaired electrons lie on the metal. Despite the lack of substantial radical character on the ligands, alkyne and ketone fragments can couple to form a high-spin iron(III) complex with a cyclized metalladihydrofuran core.

Correction to "Density Functional Calculations for Prediction of 57Fe Mossbauer Isomer Shifts and Quadrupole Splittings in ß-Diketiminate Complexes".

[This corrects the article DOI: 10.1021/acsomega.7b00595.].

Density Functional Calculations for Prediction of 57Fe Mössbauer Isomer Shifts and Quadrupole Splittings in ß-Diketiminate Complexes.

The relative ease of Mössbauer spectroscopy and of density functional theory (DFT) calculations encourages the use of Mössbauer parameters as a validation method for calculations, and the use of calculations as a double check on crystallographic structures. A number of studies have proposed correlations between the computationally determined electron density at the iron nucleus and the observed isomer shift, but deviations from these correlations in low-valent iron ß-diketiminate complexes encouraged us to determine a new correlation for these compounds. The use of B3LYP/def2-TZVP in the ORCA platform provides an excellent balance of accuracy and speed. We provide here not only this new correlation and a clear guide to its use but also a systematic analysis of the limitations of this approach. We also highlight the impact of crystallographic inaccuracies, DFT model truncation, and spin states, with intent to assist experimentalists to use Mössbauer spectroscopy and calculations together.

Stepwise N-H Bond Formation From N2-Derived Iron Nitride, Imide and Amide Intermediates to Ammonia.

Reduction of N2 to ammonia in nature and in electrocatalysis takes place through 1-proton/1-electron steps, motivating efforts to experimentally study the steps during proton/electron transfer to well-characterized N2-derived species with bridging nitrides. We report here the protonation and reduction reactions of an N2-derived iron bis(nitride) complex (Rodriguez et al., Science, 2011, 334, 780). We isolate and definitively characterize triiron imido and amido intermediates that lie along the path to ammonia formation, and Mössbauer spectroscopy shows the oxidation level of iron atoms in these mixed-valence clusters. The first two H atoms add to one of the two nitrides of the bis(nitride) complex, and the proton-coupled electron transfer in the second step can be concerted or stepwise depending on the sources of protons and electrons. The characterization of partially protonated nitrides and their mechanisms of formation are expected to guide efforts to convert N2 to ammonia with mild acids.

Geometric and redox flexibility of pyridine as a redox-active ligand that can reversibly accept one or two electrons.

A low-coordinate iron(I) species can reversibly reduce pyridine, either by one electron to give a new C-C bond, or by two electrons to give a pyridine-derived bridge with an unprecedented µ-η(1):η(3) binding mode.

Recent developments in the homogeneous reduction of dinitrogen by molybdenum and iron.

The reduction of gaseous nitrogen is a challenge for industrial, biological and synthetic chemists. Major goals include understanding the formation of ammonia for agriculture, and forming N-C and N-Si bonds for the synthesis of fine chemicals. The iron-molybdenum active site of the enzyme nitrogenase has inspired chemists to explore iron and molybdenum complexes in transformations related to N2 reduction. This area of research has gained significant momentum, and the past two years have witnessed a number of significant advances in synthetic Fe-N2 and Mo-N2 chemistry. Furthermore, the identities of all atoms in the iron-molybdenum cofactor of nitrogenase have finally been elucidated, and the discovery of a carbide has generated new questions and targets for coordination chemists. This Perspective summarizes the recent work on iron and molydenum complexes, and highlights the opportunities for continued research.