Electron Transfer Enhanced by a Minimal Energetic Driving Force at the Organic-Semiconductor Interface.

Energetic driving force for electron transfer must be minimized to realize efficient optoelectronic devices including organic light-emitting diodes (OLEDs) and organic photovoltaics (OPVs). Exploring dynamics of a charge transfer (CT) state at an interface leads to a comprehension of the relationship between energetics, electron transfer efficiency, and device performance. Here, we investigate the electron transfer from the CT state to the triplet excited state (T1) in upconversion OLEDs with 45 material combinations. By analyzing the CT emission and the singlet excited state emission from triplet-triplet annihilation via dark T1, their energetics and electron transfer efficiencies are extracted. We demonstrate that the CT→T1 electron transfer is enhanced by the stronger CT interaction and a minimal energetic driving force (<0.1 eV), which is explained using the Marcus theory with a small reorganization energy of <0.1 eV. Through our analysis, a novel donor-acceptor combination for the OLED is developed and shows an efficient blue emission with an extremely low turn-on voltage of 1.57 V. This work provides a solution to control interfacial CT state toward efficient optoelectronic devices without energy loss.

Thermodynamic Picture of Phase Segregation during the Formation of Bicontinuous Concentric Lamellar (bcl) Silica.

The thermodynamic picture describing the formation mechanism of bicontinuous concentric lamellar (bcl) nanostructured silica particles, bcl silica, was investigated thoroughly. A series of classical kinetics of bcl silica by varying the synthesis time were employed to observe the morphological evolution of bcl silica. The formation mechanism of bcl silica is proposed as the hydrolysis and condensation reactions in the reverse micelle, followed by the phase segregation process. The images of the whole part and the cross-section of bcl silica reveal that bcl silica can be obtained just 30 min after the synthesis starts. The particle morphology evolves from bicontinuous lamellar (bl) morphology, with the absence of the dense part in the center of the particle, to bicontinuous concentric lamellar (bcl) morphology. The theoretical part of this study is focused on the phase segregation process of the mixture. This process is divided thermodynamically into several reversible processes based on the reduced Helmholtz free energy state function. The type of the lamellar orientation (i.e., parallel or perpendicular orientation) changed as the stacked lamellae changed in thickness and was followed by the decrease in the free energy. It was merely shown that the segregation of the thin slab of the lamellar polysiloxane stack favors the perpendicular orientation. In contrast, the thick slab of the lamellar polysiloxane stack yields a complex lamellar structure consisting of perpendicular and parallel orientations. A lamellar polymer confined between two planar substrates can experience a topological transformation into a sphere due to an unfavorable environment, i.e., high surface tension. After the topological transformation, lamellae with a perpendicular orientation form bicontinuous lamellae, whereas the complex lamellar structure transforms into a bicontinuous concentric lamellar morphology.

Towards single electron transistor-based photon detection with microplasma-enabled graphene quantum dots.

Single-electron transistors (SETs) represent a new generation of electronic devices with high charge sensitivity, high switching speed, and low power consumption. Here a simple and controlled fabrication of graphene quantum dot (GQD)-based SETs for photon detectors has been demonstrated. The plasma-synthesized GQDs exhibit stable photoluminescence and are successfully used as the Coulomb islands between heteroepitaxial spherical-gold/platinum (HS-Au/Pt) nanogap electrodes. The as-fabricated GQD-SETs enable photon detection with 410 nm excitation owing to the ability of GQDs to generate photoluminescence emission.

Revealing the Real Size of a Porphyrin Molecule with Quantum Confinement Probing via Temperature-Dependent Photoluminescence Spectroscopy.

The confinement energy of electrons in an aromatic molecule was studied by indirect and direct methods, namely, temperature-dependent photoluminescence (TDPL) spectroscopy and scanning tunneling microscopy (STM). We observed a decrease in the tetraphenylporphyrin (H2TPP) PL intensity with increasing temperature. The increase in temperature provides kinetic energy for the electrons to overcome the confinement energy barrier, making recombination via nonradiative pathways more favorable. The results of fitting the integrated TDPL intensity with a modified Arrhenius equation suggest two confinement energy values. We propose that these energy values are related to the size of the delocalized electron cloud along the plane and thickness of the H2TPP ring. These values quantitatively express an abstract form of the size of the aromatic ring system. These results are in good agreement with the topography images of single H2TPP molecules and monolayer H2TPP obtained by a direct probing method using STM. These results are also supported by the porphyrin ring orientation relative to the excited crystal face during the TDPL measurements.

Enhancement of Ultrahigh Rate Chargeability by Interfacial Nanodot BaTiO3 Treatment on LiCoO2 Cathode Thin Film Batteries.

Nanodot BaTiO3 supported LiCoO2 cathode thin films can dramatically improve high-rate chargeability and cyclability. The prepared BaTiO3 nanodot is <3 nm in height and 35 nm in diameter, and its coverage is <5%. Supported by high dielectric constant materials on the surface of cathode materials, Li ion (Li+) can intercalate through robust Li paths around the triple-phase interface consisting of the dielectric, cathode, and electrolyte. The current concentration around the triple-phase interface is observed by the finite element method and is in good agreement with the experimental data. The interfacial resistance between the cathode and electrolyte with nanodot BaTiO3 is smaller than that without nanodot BaTiO3. The decomposition of the organic solvent electrolyte can prevent the fabrication of a solid electrolyte interface around the triple-phase interface. Li+ paths may be created at non solid electrolyte interface covered regions by the strong current concentration originating from high dielectric constant materials on the cathode. Robust Li+ paths lead to excellent chargeability and cyclability.

Quantum Chemical Studies on Electron-Accepting Overcrowded Ethylene with a Polarizable Skeleton.

We report the quantum chemical studies on the neutral and radical anion forms of an electron-accepting overcrowded ethylene (OCE1) featuring a highly polarizable skeleton based on the density functional theory (DFT) approach using the M06-2X hybrid functional. Calculated results indicate that OCE1 (bis{4H,8H-4-(dicyanomethylene)benzo[1,2-c:4,5-c']bis[1,2,5]thiadiazol-8-ylidene}) shows conformational behaviors and energetics similar to those of bianthrone (OCE2), a typical thermochromic overcrowded ethylene. Neutral OCE1 and its radical anion have antifolded (afOCE1) and twisted (tOCE1) isomers on their potential energy surfaces. The calculated isomerization barrier heights of OCE1 and its radical anion are considerably low, indicating that its conformation is susceptible to interactions with surrounding molecules. While two afOCE1 molecules can form a simple π-stacked dimer, tOCE1 tends to be converted to afOCE1 when the two tOCE1 molecules come close together, indicating the instability of tOCE1 in the homogeneous OCE1 solid state. The thermochromic behavior difference between OCE1 and OCE2 in solution is closely associated with the considerably small energy difference between the afOCE1 and the tOCE1 as compared with OCE2. The properties of OCE1 are also compared with other typical electron-accepting overcrowded ethylenes in terms of electronic structure, energetics, and conformational behaviors.

Three-input gate logic circuits on chemically assembled single-electron transistors with organic and inorganic hybrid passivation layers.

Single-electron transistors (SETs) are sub-10-nm scale electronic devices based on conductive Coulomb islands sandwiched between double-barrier tunneling barriers. Chemically assembled SETs with alkanethiol-protected Au nanoparticles show highly stable Coulomb diamonds and two-input logic operations. The combination of bottom-up and top-down processes used to form the passivation layer is vital for realizing multi-gate chemically assembled SET circuits, as this combination enables us to connect conventional complementary metal oxide semiconductor (CMOS) technologies via planar processes. Here, three-input gate exclusive-OR (XOR) logic operations are demonstrated in passivated chemically assembled SETs. The passivation layer is a hybrid bilayer of self-assembled monolayers (SAMs) and pulsed laser deposited (PLD) aluminum oxide (AlO[Formula: see text]), and top-gate electrodes were prepared on the hybrid passivation layers. Top and two-side-gated SETs showed clear Coulomb oscillation and diamonds for each of the three available gates, and three-input gate XOR logic operation was clearly demonstrated. These results show the potential of chemically assembled SETs to work as logic devices with multi-gate inputs using organic and inorganic hybrid passivation layers.

Nanoparticle characterization based on STM and STS.

In this review, we describe recent progress made in the study of nanoparticles characterized by scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS). Basic principles of STM measurements and single-electron tunneling phenomena through a single NP are summarized. We highlight the results of electrical and photonic properties on NPs studied by STM and STS. Because nanoparticles are single-digit nanometre in diameter, a single-electron transport on individual nanoparticles such as Coulomb blockade and resonant tunneling through discrete energy levels are investigated. Photon-emission from NPs is also introduced based on STM measurements. Novel single-nanoparticle functions such as stochastic blinking and one-write erasing behaviours are presented. This review provides an overview of nanoparticle characterization methods based on STM and STS that include the detailed understanding of the electrical and photonics properties of nanoparticles.

Control of charging energy in chemically assembled nanoparticle single-electron transistors.

We show the control of a charging energy in chemically assembled nanoparticle single-electron transistors (SETs) by altering the core diameter of Au nanoparticles. The charging energy is a fundamental parameter that decides the operating temperature of SETs. Practical application of SETs requires us to regulate the value of the charging energy by tuning the diameter of quantum dots. In this study, we used 3.0, 5.0 and 6.2 nm diameter synthesized Au nanoparticles as a quantum dot in the SETs. The total capacitances and charging energy of the SETs were evaluated from the rhombic Coulomb diamonds attributed to a single Coulomb island. The capacitance and charging energy matched with a concentric sphere model much better than with a simple sphere model. The operating temperatures of the SETs suggested that a charging energy 2.2 times greater than the thermal energy was required for stable operation, in theory. These results will help us to select an appropriate core diameter for the Au nanoparticles in practical SETs.

High Volumetric Energy Density Supercapacitor of Additive-Free Quantum Dot Hierarchical Nanopore Structure.

The high surface-area-to-volume ratio of colloidal quantum dots (QDs) positions them as promising materials for high-performance supercapacitor electrodes. However, the challenge lies in achieving a highly accessible surface area, while maintaining good electrical conductivity. An efficient supercapacitor demands a dense yet highly porous structure that facilitates efficient ion-surface interactions and supports fast charge mobility. Here we demonstrate the successful development of additive-free ultrahigh energy density electric double-layer capacitors based on quantum dot hierarchical nanopore (QDHN) structures. Lead sulfide QDs are assembled into QDHN structures that strike a balance between electrical conductivity and efficient ion diffusion by employing meticulous control over inter-QD distances without any additives. Using ionic liquid as the electrolyte, the high-voltage ultrathin-film microsupercapacitors achieve a remarkable combination of volumetric energy density (95.6 mWh cm-3) and power density (13.5 W cm-3). This achievement is attributed to the intrinsic capability of QDHN structures to accumulate charge carriers efficiently. These findings introduce innovative concepts for leveraging colloidal nanomaterials in the advancement of high-performance energy storage devices.

Negative differential resistance by molecular resonant tunneling between neutral tribenzosubporphine anchored to a Au(111) surface and tribenzosubporphine cation adsorbed on to a tungsten tip.

Tribenzosubporphyrins are boron(III)-chelated triangular bowl-shaped ring-contracted porphyrins that possess a 14π-aromatic circuit. Their flat molecular shapes and discrete molecular orbital diagrams make them ideal for observation by scanning tunneling microscopy (STM). Expanding their applications toward single molecule-based devices requires a fundamental knowledge of single molecular conductance between tribenzosubporphines and the STM metal tip. We utilized a tungsten (W) STM tip to investigate the electronic properties of B-(5-mercaptopentoxy)tribenzosubporphine 1 at the single molecular level. B-(5-mercaptopentoxy)-tribenzosubporphine 1 was anchored to the Au(111) surface via reaction with 1-heptanethiol linkers that were preorganized as a self-assembled monolayer (C7S SAM) on the Au(111) substrate. This arrangement ensured that 1 was electronically decoupled from the metal surface. Differential conductance (dI/dV - V) measurements with the bare W tip exhibited a broad gap region of low conductance and three distinct responses at 2.4,-1.3, and -2.1 V. Bias-voltage-dependent STM imaging of 1 at 65 K displayed a triangle shape at -2.1 < V < -1.3 V and a circle shape at V < -2.1 V, reflecting its HOMO and HOMO-1, respectively. In addition, different conductance behaviors were reproducibly observed, which has been ascribed to the adsorption of a tribenzosubporphine-cation on the W tip. When using a W tip doped with preadsorbed tribenzosubporphine-cation, negative differential resistance (NDR) phenomena were clearly observed in a reproducible manner with a peak-to-valley ratio of 2.6, a value confirmed by spatial mapping conductance measurements. Collectively, the observed NDR phenomena have been attributed to effective molecular resonant tunneling between a neutral tribenzosubporphine anchored to the metal surface and a tribenzosubporphine cation adsorbed on a W tip.

Bottom Contact 100 nm Channel-Length α-In2 Se3 In-Plane Ferroelectric Memory.

Owing to the emerging trend of non-volatile memory and data-centric computing, the demand for more functional materials and efficient device architecture at the nanoscale is becoming stringent. To date, 2D ferroelectrics are cultivated as channel materials in field-effect transistors for their retentive and switchable dipoles and flexibility to be compacted into diverse structures and integration for intensive production. This study demonstrates the in-plane (IP) ferroelectric memory effect of a 100 nm channel-length 2D ferroelectric semiconductor α-In2 Se3 stamped onto nanogap electrodes on Si/SiO2 under a lateral electric field. As α-In2 Se3 forms the bottom contact of the nanogap electrodes, a large memory window of 13 V at drain voltage between ±6.5 V and the on/off ratio reaching 103 can be explained by controlled IP polarization. Furthermore, the memory effect is modulated by the bottom gate voltage of the Si substrate due to the intercorrelation between IP and out-of-plane (OOP) polarization. The non-volatile memory characteristics including stable retention lasting 17 h, and endurance over 1200 cycles suggest a wide range of memory applications utilizing the lateral bottom contact structure.

Blue organic light-emitting diode with a turn-on voltage of 1.47 V.

Among the three primary colors, blue emission in organic light-emitting diodes (OLEDs) are highly important but very difficult to develop. OLEDs have already been commercialized; however, blue OLEDs have the problem of requiring a high applied voltage due to the high-energy of blue emission. Herein, an ultralow voltage turn-on at 1.47 V for blue emission with a peak wavelength at 462 nm (2.68 eV) is demonstrated in an OLED device with a typical blue-fluorescent emitter that is widely utilized in a commercial display. This OLED reaches 100 cd/m2, which is equivalent to the luminance of a typical commercial display, at 1.97 V. Blue emission from the OLED is achieved by the selective excitation of the low-energy triplet states at a low applied voltage by using the charge transfer (CT) state as a precursor and triplet-triplet annihilation, which forms one emissive singlet from two triplet excitons.

Platonic hexahedron composed of six organic faces with an inscribed Au cluster.

The structures of nanomaterials determine their individual properties and the suprastructures they can form. Introducing anisotropic shapes and/or interaction sites to isotropic nanoparticles has been proposed to extend the functionality and possible suprastructure motifs. Because of symmetric anisotropy, Platonic solids with regular polygon faces are one of the most promising nanoscale structures. Introduction of Platonic solid anisotropy to isotropic nanomaterials would expand the functionality and range of possible suprastructure motifs. Here, we demonstrate a novel strategy to obtain nano-Platonic solids through the face coordination of square porphyrins on an inscribed Au sphere with adequate size. The face coordination of the multidentate porphyrin derivatives, with four acetylthio groups facing the same direction, on the Au cluster encased the Au cluster in a Platonic hexahedron with six porphyrin faces. Transmission electron microscopy, mass spectrometry, elemental analysis, and scanning tunnelling microscopy were used to confirm the formation of the nano-Platonic hexahedron.

Coulomb blockade behaviors in individual Au nanoparticles as observed through noncontact atomic force spectroscopy at room temperature.

Coulomb blockade behaviors in individual Au nanoparticles of 2 nm core diameter in double-barrier structures have been studied by means of noncontact atomic force spectroscopy (NC-AFS) at room temperature. The Au nanoparticles with a 1-decanethiol ligand were chemisorbed by 1,10-decanedithiol molecules of a mixed 1-octanethiol/1,10-decanedithiol self-assembled monolayer coated on a Au(111) surface; these particles were observed through NC-AFS. NC-AFS measurements of the cantilever frequency shift-sample voltage (Δf-V(S)) curves were sequentially conducted on three Au nanoparticles under the same experimental conditions; the Δf-V(S) curves were found to deviate from the parabolic (Δf(N)) curve in the cases where no extra charge existed on the Au core. The experimental Δf(CB)(=Δf-Δf(N)) and Δf(CB)/V curves agree well with the theoretical curves obtained using a golden-rule calculation and the same parabolic parameters. All the results, through NC-AFS, suggest Coulomb blockade behaviors in the Au nanoparticles at room temperature.

Nanostructure-induced L10-ordering of twinned single-crystals in CoPt ferromagnetic nanowires.

L10-ordered ferromagnetic nanowires with large coercivity are essential for realizing next-generation spintronic devices. Ferromagnetic nanowires have been commonly fabricated by first L10-ordering of initially disordered ferromagnetic films by annealing and then etching them into nanowire structures using lithography. If the L10-ordered nanowires can be fabricated using only lithography and subsequent annealing, the etching process can be omitted, which leads to an improvement in the fabrication process for spintronic devices. However, when nanowires are subjected to annealing, they easily transform into droplets, which is well-known as Plateau-Rayleigh instability. Here, we propose a concept of "nanostructure-induced L10-ordering" of twinned single-crystals in CoPt ferromagnetic nanowires with a 30 nm scale ultrafine linewidth on Si/SiO2 substrates. The driving forces for nanostructure-induced L10-ordering during annealing are atomic surface diffusion and extremely large internal stress at ultrasmall 10 nm scale curvature radii of the nanowires. (Co/Pt)6 multilayer nanowires are fabricated by a lift-off process combining electron-beam lithography and electron-beam evaporation, followed by annealing. Cross-sectional scanning transmission electron microscope images and nano-beam electron diffraction patterns clearly indicate nanostructure-induced L10-ordering of twinned single-crystals in the CoPt ferromagnetic nanowires, which exhibit a large coercivity of 10 kOe for perpendicular, longitudinal, and transversal directions of the nanowires. Two-dimensional grazing incidence X-ray diffraction shows superlattice peaks with Debye-Scherrer ring shapes, which also supports the nanostructure-induced L10-ordering. The fabrication method for nanostructure-induced L10-ordered CoPt ferromagnetic nanowires with twinned single-crystals on Si/SiO2 substrates would be significant for future silicon-technology-compatible spintronic applications.

Suppression Mechanisms of the Solid-Electrolyte Interface Formation at the Triple-Phase Interfaces in Thin-Film Li-Ion Batteries.

Side reactions of the charge/discharge in Li-ion batteries (LIBs) generate a solid-electrolyte interface (SEI) onto an electrode surface, resulting in the degradation of the lifetime of a cell. The suppression of SEI formations has attracted much attention for achieving longer cyclable LIBs. Our research group has previously reported that few SEI were observed at triple-phase interfaces (TPIs) consisting of BaTiO3, LiCoO2, and electrolyte interfaces in LIBs with excellent cyclability and ultrahigh-speed chargeability. An investigation on the suppression mechanisms of SEI formations at TPIs should yield important information on understanding the undesirable side reactions. Therefore, we have explored the suppression mechanisms of SEI formations by preparing epitaxial thin films and evaluating the surface of the samples after the electrochemical treatment. The results of X-ray photoelectron spectroscopy and scanning electron microscopy with energy-dispersive X-ray analysis measurements suggested that the decomposition of LiPF6 was suppressed at TPIs, implying that the generation of PF5 via the decomposition of LiPF6 contributed to SEI formation.

Controlled electroplating and electromigration in nickel electrodes for nanogap formation.

We report the fabrication of nickel nanospaced electrodes by electroplating and electromigration for nanoelectronic devices. Using a conventional electrochemical cell, nanogaps can be obtained by controlling the plating time alone and after a careful optimization of electrodeposition parameters such as electrolyte bath, applied potential, cleaning, etc. During the process, the gap width decreases exponentially with time until the electrode gaps are completely bridged. Once the bridge is formed, the ex situ electromigration technique can reopen the nanogap. When the gap is ∼ 1 nm, tunneling current-voltage characterization shows asymmetry which can be corrected by an external magnetic field. This suggests that charge transfer in the nickel electrodes depends on the orientation of magnetic moments.

Coherent Resonant Electron Tunneling at 9 and 300 K through a 4.5 nm Long, Rigid, Planar Organic Molecular Wire.

Organic molecular wires that operate stably at ambient temperatures are a necessary first step toward practical and useful molecular-scale electronic devices, which have thus far been hampered by many factors, including the structural and electron configurational instability of organic molecules. We report here that a single disulfanyl carbon-bridged oligo(phenylenevinylene) (COPV6) molecule embedded between thermally stable electroless Au-plated electrodes of a 4 nm nanogap undergoes coherent resonant tunneling at both 9 and 300 K and functions even after storage in air at room temperature. Such enormous stability is ascribed to the unique structural characteristics of COPV6, that is, rigidity, planarity, thermal stability, resistivity against oxidation and reduction, and an organic insulating sheath that protects the π-system. When sandwiched between the gaps without pinning, this molecule behaves as a Coulomb island with sequential single-electron tunneling at 9 K that disappears at 300 K while maintaining a stable electron flow.

Molecular floating-gate single-electron transistor.

We investigated reversible switching behaviors of a molecular floating-gate single-electron transistor (MFG-SET). The device consists of a gold nanoparticle-based SET and a few tetra-tert-butyl copper phthalocyanine (ttbCuPc) molecules; each nanoparticle (NP) functions as a Coulomb island. The ttbCuPc molecules function as photoreactive floating gates, which reversibly change the potential of the Coulomb island depending on the charge states induced in the ttbCuPc molecules by light irradiation or by externally applied voltages. We found that single-electron charging of ttbCuPc leads to a potential shift in the Coulomb island by more than half of its charging energy. The first induced device state was sufficiently stable; the retention time was more than a few hours without application of an external voltage. Moreover, the device exhibited an additional state when irradiated with 700 nm light, corresponding to doubly charged ttbCuPc. The life time of this additional state was several seconds, which is much shorter than that of the first induced state. These results clearly demonstrate an alternative method utilizing the unique functionality of the single molecule in nanoelectronics devices, and the potential application of MFG-SETs for investigating molecular charging phenomena.