RESUMO
Transition metal phosphides (TMPs) have been regarded as the prospective anodes for lithium-ion batteries (LIBs). However, their poor intrinsic conductivity and inevitable large volume variation result in sluggish redox kinetics and the collapse of electrode structure during cycling, which substantially hinders their practical use. Herein, an effective composite electrodes design strategy of "assembly and phosphorization" is proposed to construct synergistic N-doped carbon-encapsulated NiCoP@N-C-based composites, employing a metal-organic frameworks (MOFs) as sacrificial hosts. Serving as the anodes for LIBs, one representative P-NCP-NC-600 electrode exhibits high reversible capacity (858.5 mAh g-1, 120 cycles at 0.1 A g-1) and superior long-cycle stability (608.7 mAh g-1, 500 cycles at 1 A g-1). The impressive performances are credited to the synergistic effect between its unique composite structure, electronic properties and ideal composition, which achieve plentiful lithium storage sites and reinforce the structural architecture. By accompanying experimental investigations with theoretical calculations, a deep understanding in the lithium storage mechanism is achieved. Furthermore, it is revealed that a more ideal synergistic effect between NiCoP components and N-doped carbon frameworks is fundamentally responsible for the realization of superb lithium storage properties. This strategy proposes certain instructive significance toward designable high-performance TMP-based anodes for high-energy density LIBs.
RESUMO
Freeze-casting has been wildly exploited to construct porous ceramics but usually requires costly and demanding freeze-drying (high vacuum, size limit, and supercooled chamber), which can be avoided by the ambient pressure drying (APD) technique. However, applying APD to freeze-cast ceramic based on an aqueous suspension is still challenging due to inert surface chemistry. Herein, a modified APD strategy is developed to improve the drying process of freeze-cast ceramics by exploiting the simultaneous ice etching, ionic cross-linking, and solvent exchange under mild conditions (-10-0 °C, ambient pressure). This versatile strategy is applicable to various ceramic species, metal ions, and freezing techniques. The incorporated metal ions not only enhance liquid-phase sintering, producing ceramics with higher density and mechanical properties than freeze-cast counterparts, but also render customizable coloration and antibacterial property. The cost-/time-efficient APD is promising for mass production and even successive production of large-size freeze-cast ceramics that exceed the size of commercial freeze-dryers.
RESUMO
Unstable cathode-electrolyte and/or anode-electrolyte interface in polymer-based sodium-ion batteries (SIBs) will deteriorate their cycle performance. Herein, a unique solvated double-layer quasi-solid polymer electrolyte (SDL-QSPE) with high Na+ ion conductivity is designed to simultaneously improve stability on both cathode and anode sides. Different functional fillers are solvated with plasticizers to improve Na+ conductivity and thermal stability. The SDL-QSPE is laminated by cathode- and anode-facing polymer electrolyte to meet the independent interfacial requirements of the two electrodes. The interfacial evolution is elucidated by theoretical calculations and 3D X-ray microtomography analysis. The Na0.67 Mn2/3 Ni1/3 O2 |SDL-QSPE|Na batteries exhibit 80.4â mAh g-1 after 400â cycles at 1â C with the Coulombic efficiency close to 100 %, which significantly outperforms those batteries using the monolayer-structured QSPE.
RESUMO
The proton, as the cationic form of the lightest element-H, is regarded as most ideal charge carrier in "rocking chair" batteries. However, current research on proton batteries is still at its infancy, and they usually deliver low capacity and suffer from severe acidic corrosion. Herein, electrochemically activated metallic H1.75MoO3 nanobelts are developed as a stable electrode for proton storage. The electrochemically pre-intercalated protons not only bond directly with the terminal O3 site via strong O-H bonds but also interact with the oxygens within the adjacent layers through hydrogen bonding, forming a hydrogen-bonding network in H1.75MoO3 nanobelts and enabling a diffusion-free Grotthuss mechanism as a result of its ultralow activation energy of â¼0.02 eV. To the best of our knowledge, this is the first reported inorganic electrode exhibiting Grotthuss mechanism-based proton storage. Additionally, the proton intercalation into MoO3 with formation of H1.75MoO3 induces strong Jahn-Teller electron-phonon coupling, rendering a metallic state. As a consequence, the H1.75MoO3 shows an outstanding fast charging performance and maintains a capacity of 111 mAh/g at 2500 C, largely outperforming the state-of-art battery electrodes. More importantly, a symmetric proton ion full cell based on H1.75MoO3 was assembled and delivered an energy density of 14.7 Wh/kg at an ultrahigh power density of 12.7 kW/kg, which outperforms those of fast charging supercapacitors and lead-acid batteries.
RESUMO
A large and increasing number of scientific domains pushes for high neutron imaging resolution achieved in reasonable times. Here we present the principle, design and performance of a detector based on infinity corrected optics combined with a crystalline Gd3Ga5O12 : Eu scintillator, which provides an isotropic sub-4 µm true resolution. The exposure times are only of a few minutes per image. This is made possible also by the uniquely intense cold neutron flux available at the imaging beamline NeXT-Grenoble. These comparatively rapid acquisitions are compatible with multiple high quality tomographic acquisitions, opening new venues for in-operando testing, as briefly exemplified here.
RESUMO
The application of flexible, robust, and low-cost solid polymer electrolytes in next-generation all-solid-state lithium metal batteries has been hindered by the low room-temperature ionic conductivity of these electrolytes and the small critical current density of the batteries. Both issues stem from the low mobility of Li+ ions in the polymer and the fast lithium dendrite growth at the Li metal/electrolyte interface. Herein, Mg(ClO4)2 is demonstrated to be an effective additive in the poly(ethylene oxide) (PEO)-based composite electrolyte to regulate Li+ ion transport and manipulate the Li metal/electrolyte interfacial performance. By combining experimental and computational studies, we show that Mg2+ ions are immobile in a PEO host due to coordination with ether oxygen and anions of lithium salts, which enhances the mobility of Li+ ions; more importantly, an in-situ formed Li+-conducting Li2MgCl4/LiF interfacial layer homogenizes the Li+ flux during plating and increases the critical current density up to a record 2 mA cm-2. Each of these factors contributes to the assembly of competitive all-solid-state Li/Li, LiFePO4/Li, and LiNi0.8Mn0.1Co0.1O2/Li cells, demonstrating the importance of surface chemistry and interfacial engineering in the design of all-solid-state Li metal batteries for high-current-density applications.
RESUMO
Potassium-ion batteries (KIBs) have come into the spotlight in large-scale energy storage systems because of cost-effective and abundant potassium resources. However, the poor rate performance and problematic cycle life of existing electrode materials are the main bottlenecks to future potential applications. Here, the first example of preparing 3D hierarchical nanoboxes multidimensionally assembled from interlayer-expanded nano-2D MoS2 @dot-like Co9 S8 embedded into a nitrogen and sulfur codoped porous carbon matrix (Co9 S8 /NSC@MoS2 @NSC) for greatly boosting the electrochemical properties of KIBs in terms of reversible capacity, rate capability, and cycling lifespan, is reported. Benefiting from the synergistic effects, Co9 S8 /NSC@MoS2 @NSC manifest a very high reversible capacity of 403 mAh g-1 at 100 mA g-1 after 100 cycles, an unprecedented rate capability of 141 mAh g-1 at 3000 mA g-1 over 800 cycles, and a negligible capacity decay of 0.02% cycle-1 , boosting promising applications in high-performance KIBs. Density functional theory calculations demonstrate that Co9 S8 /NSC@MoS2 @NSC nanoboxes have large adsorption energy and low diffusion barriers during K-ion storage reactions, implying fast K-ion diffusion capability. This work may enlighten the design and construction of advanced electrode materials combined with strong chemical bonding and integrated functional advantages for future large-scale stationary energy storage.
RESUMO
Most epiphytic bromeliads, especially those in the genus Tillandsia, lack functional roots and rely on the absorption of water and nutrients by large, multicellular trichomes on the epidermal surfaces of leaves and stems. Another important function of these structures is the spread of water over the epidermal surface by capillary action between trichome "wings" and epidermal surface. Although critical for the ultimate absorption by these plants, understanding of this function of trichomes is primarily based on light microscope observations. To better understand this phenomenon, the distribution of water was followed by its attenuation of cold neutrons following application of H2 O to the cut end of Tillandsia usneoides shoots. Experiments confirmed the spread of added water on the external surfaces of this "atmospheric" epiphyte. In a morphologically and physiologically similar plant lacking epidermal trichomes, water added to the cut end of a shoot clearly moved via its internal xylem and not on its epidermis. Thus, in T. usneoides, water moves primarily by capillarity among the overlapping trichomes forming a dense indumentum on shoot surfaces, while internal vascular water movement is less likely. T. usneoides, occupying xeric microhabitats, benefits from reduction of water losses by low-shoot xylem hydraulic conductivities.
Assuntos
Tillandsia , Tricomas/fisiologia , Água/fisiologia , Transporte Biológico , DesidrataçãoRESUMO
We herein report on using a compact and low cost scintillator-camera based neutron detection system for quantitative time-of-flight imaging applications. While powerful pulsed neutron sources emerge and enable unprecedented scientific achievements, one bottleneck is the availability of suitable detectors that provide high count- and high frame- rate capabilities. For imaging applications the achievable spatial resolution/pixel size is obviously another key characteristic. While major effort was so far directed towards the development of neutron counting type imaging detectors, this work demonstrates that a camera based detector system as commonly employed at steady state sources can also be used if a suitable camera is utilized. This is demonstrated at the ESS test beamline (V20) at Helmholtz-Zentrum Berlin by recording the time-of-flight transmission spectrum of steel samples using a CMOS camera at 1 kHz frame rate, revealing the characteristic Bragg edge pattern. This 'simple' setup in the current state presents a useful option of neutron detection and has the potential to overcome many of the existing limitations and could provide a reliable alternative for neutron detector technology in general, given that the camera and scintillator technology keep up the current development speed.
RESUMO
Here, we report on a new record in the acquisition time for fast neutron tomography. With an optimized imaging setup, it was possible to acquire single radiographic projection images with 10 ms and full tomographies with 155 projections images and a physical spatial resolution of 200 µm within 1.5 s. This is about 6.7 times faster than the current record. We used the technique to investigate the water infiltration in the soil with a living lupine root system. The fast imaging setup will be part of the future NeXT instrument at ILL in Grenoble with a great field of possible future applications.
Assuntos
Nêutrons , Tomografia , Lupinus/fisiologia , Raízes de Plantas/fisiologia , Intensificação de Imagem Radiográfica , SoloRESUMO
A new methodology to segment the three-dimensional (3D) internal structure of Ibuprofen tablets from synchrotron tomography is presented, introducing a physically coherent trinarization for greyscale images of Ibuprofen tablets consisting of three phases: microcrystalline cellulose, Ibuprofen and pores. For this purpose, a hybrid approach is developed combining a trinarization by means of statistical learning with a trinarization based on a watershed algorithm. This hybrid approach allows us to compute microstructure characteristics of tablets using methods of statistical image analysis. A comparison with experimental results shows that there is a significant amount of pores which is below the resolution limit. At the same time, results from image analysis let us conjecture that these pores constitute the great majority of the surface between pores and solid. Furthermore, we compute microstructure characteristics, which are experimentally not accessible such as local percolation probabilities and chord length distribution functions. Both characteristics are meaningful in order to quantify the influence of tablet compaction on its microstructure. The presented approach can be used to get better insight into the relationship between production parameters and microstructure characteristics based on 3D image data of Ibuprofen tablets manufactured under different conditions and elucidate key effects on the strength and solubility kinetics of the final formulation. LAY DESCRIPTION: A typical formulation of uniaxial compacted Ibuprofen tablets consist of a mixture of an excipient (microcrystalline cellulose) with an active ingredient (a ground fraction of Ibuprofen). The final mechanical strength of the tablet as well as the release kinetics are strongly influenced by the underlying microstructure, i.e. the spatial arrangement of the microcrystalline cellulose and Ibuprofen within the tablet. In order to optimize the performance of the tablet, it is important to investigate the relationship between its microstructure and the corresponding production parameters. For this purpose, 3D imaging is a powerful tool as it allows computing microstructural properties such as the internal arrangement, interconnectivity and pore location and distribution, characteristics that cannot be computed by experimental characterization techniques. In the present study, a new algorithm for an accurate trinarization of 3D image data obtained by synchrotron tomography is presented. Trinarization means that we reconstruct microcrystalline cellulose, Ibuprofen and pores on the basis of the 3D images, where one can only observe different greyscale values, but not the different constituents themselves. For this purpose, a hybrid approach combining a trinarization by means of artificial intelligence with a trinarization based on a geometrically motivated algorithm is developed. This hybrid approach allows to compute microstructure characteristics of tablets using image analysis. A comparison with experimental results shows that there is a significant amount of pores below the resolution limit. At the same time results from image analysis lead to the conjecture that these pores constitute the major part of the surface between pores and solid. Moreover, characteristics are computed by image analysis, which are meaningful in order to quantify the influence of tablet compaction parameters on its microstructure. The presented novel approach can be used to elucidate the relationship between production parameters and microstructure characteristics based on 3D image data of Ibuprofen tablets manufactured under different mixing, loading and processing conditions.
Assuntos
Ibuprofeno/análise , Ibuprofeno/química , Imageamento Tridimensional/métodos , Tomografia/métodos , Algoritmos , Celulose/química , Química Farmacêutica , Excipientes/química , Síncrotrons , Comprimidos , Tomografia/instrumentaçãoRESUMO
A strategy to mitigate typical reconstruction artefacts in missing wedge computed tomography is presented. These artefacts appear as elongations of reconstructed details along the mean direction (i.e. the symmetry centre of the projections). Although absent in standard computed tomography applications, they are most prominent in advanced electron tomography and also in special topics of X-ray and neutron tomography under restricted geometric boundary conditions. We investigate the performance of the DIRECTT (Direct Iterative Reconstruction of Computed Tomography Trajectories) algorithm to reduce the directional artefacts in standard procedures. In order to be sensitive to the anisotropic nature of missing wedge artefacts, we investigate isotropic substructures of metal foam as well as circular disc models. Comparison is drawn to filtered backprojection and algebraic techniques. Reference is made to reconstructions of complete data sets. For the purpose of assessing the reconstruction quality, Fourier transforms are employed to visualize the missing wedge directly. Deficient reconstructions of disc models are evaluated by a length-weighted kernel density estimation, which yields the probabilities of boundary orientations. The DIRECTT results are assessed at different signal-to-noise ratios by means of local and integral evaluation parameters.
RESUMO
This work presents a series of three-dimensional computational methods with the objective of analyzing and quantifying some important structural characteristics in a collection of low-density polyolefin-based foams. First, the solid phase tortuosity, local thickness, and surface curvature, have been determined over the solid phase of the foam. These parameters were used to quantify the presence of wrinkles located at the cell walls of the foams under study. In addition, a novel segmentation technique has been applied to the continuous solid phase. This novel method allows performing a separate analysis of the constituting elements of this phase, that is, cell struts and cell walls. The methodology is based on a solid classification algorithm and evaluates the local topological dissimilarities existing between these elements. Thanks to this method it was possible to perform a separate analysis of curvature, local thickness, and corrugation ratio in the solid constituents that reveals additional differences that were not detected in the first analysis of the continuous structure. The methods developed in this work are applicable to other types of porous materials in fields such as geoscience or biomedicine.
RESUMO
A novel combination of in operando X-ray tomography and model-based analysis of zinc air batteries is introduced. Using this approach the correlation between the three-dimensional morphological properties of the electrode - on the one hand - and the electrochemical properties of the battery - on the other hand is revealed. In detail, chemical dissolution of zinc particles and the electrode volume were investigated non-destructively during battery operation by X-ray tomography (applying a spatial resolution of 9 µm), while simulation yielded cell potentials of each electrode and allows for the prediction of long-term operation behavior. Furthermore, the analysis of individual zinc particles revealed an electrochemical dissolution process that can be explained using an adapted shrinking-core model.
RESUMO
As a pioneering battery technology, even though sodium-ion batteries (SIBs) are safe, non-flammable, and capable of exhibiting better temperature endurance performance than lithium-ion batteries (LIBs), because of lower energy density and larger ionic size, they are not amicable for large-scale applications. Generally, the electrochemical storage performance of a secondary battery can be improved by monitoring the composition and morphology of electrode materials. Because more is the intricacy of a nanostructured composite electrode material, more electrochemical storage applications would be expected. Despite the conventional methods suitable for practical production, the synthesis of metal-organic frameworks (MOFs) would offer enormous opportunities for next-generation battery applications by delicately systematizing the structure and composition at the molecular level to store sodium ions with larger sizes compared with lithium ions. Here, the review comprehensively discusses the progress of nanostructured MOFs and their derivatives applied as negative and positive electrode materials for effective sodium storage in SIBs. The commercialization goal has prompted the development of MOFs and their derivatives as electrode materials, before which the synthesis and mechanism for MOF-based SIB electrodes with improved sodium storage performance are systematically discussed. Finally, the existing challenges, possible perspectives, and future opportunities will be anticipated.
RESUMO
The development of Li-free anodes to inhibit Li dendrite formation and provide high energy density Li batteries is highly applauded. However, the lithiophobic interphase and heterogeneous Li deposition hindered the practical application. In this work, a 20 nm ultra-sleek high entropy alloy (HEA, NiCdCuInZn) tights loaded with HEA nanoparticles are developed by a thermodynamically driven phase transition method on the carbon fiber (HEA/C). Multiple Li+ transport paths and abundant active sites are enabled by the cocktail effect of different constituent elements in HEA. These active sites with gradient absorption energies (-3.18 to -2.03 eV) facilitate selective binding, providing a low barrier for homogeneous Li nucleation. Simultaneously, multiple transport paths promote Li diffusion behavior with uniform Li deposition. Thus, the HEA/C achieves high reversibility of Li plating/stripping processes over 2000 cycles with a coulombic efficiency of 99.6% at 5 mA cm-2 /1 mAh cm-2 in asymmetric cells, as well as over 7200 h at 60 mA cm-2 /60 mAh cm-2 in symmetric cells. Moreover, the anode-free full cell with the HEA/C host has an average coulombic efficiency of 99.5% at 1 C after 160 cycles. This advanced HEA structure design shows a favorable potential application for anode-free Li metal batteries.
RESUMO
Rechargeable alkali metal-CO2 batteries, which combine high theoretical energy density and environmentally friendly CO2 fixation ability, have attracted worldwide attention. Unfortunately, their electrochemical performances are usually inferior for practical applications. Aiming to reveal the underlying causes, a combinatorial usage of advanced nondestructive and postmortem characterization tools is used to intensively study the failure mechanisms of Li/Na-CO2 batteries. It is found that a porous interphase layer is formed between the separator and the Li/Na anode during the overvoltage rising and battery performance decaying process. A series of control experiments are designed to identify the underlying mechanisms dictating the observed morphological evolution of Li/Na anodes, and it is found that the CO2 synergist facilitates Li/Na chemical corrosion, the process of which is further promoted by the unwanted galvanic corrosion and the electrochemical cycling conditions. A detailed compositional analysis reveals that the as-formed interphase layers under different conditions are similar in species, with the main differences being their inconsistent quantity. Theoretical calculation results not only suggest an inherent intermolecular affinity between the CO2 and the electrolyte solvent but also provide the most thermodynamically favored CO2 reaction pathways. Based on these results, important implications for the further development of rechargeable alkali metal-CO2 batteries are discussed. The current discoveries not only fundamentally enrich our knowledge of the failure mechanisms of rechargeable alkali metal-CO2 batteries but also provide mechanistic directions for protecting metal anodes to build high-reversible alkali metal-CO2 batteries.
RESUMO
Raising the charging cut-off voltage of layered oxide cathodes can improve their energy density. However, it inevitably introduces instabilities regarding both bulk structure and surface/interface. Herein, exploiting the unique characteristics of high-valence Nb5+ element, a synchronous surface-to-bulk-modified LiCoO2 featuring Li3 NbO4 surface coating layer, Nb-doped bulk, and the desired concentration gradient architecture through one-step calcination is achieved. Such a multifunctional structure facilitates the construction of high-quality cathode/electrolyte interface, enhances Li+ diffusion, and restrains lattice-O loss, Co migration, and associated layer-to-spinel phase distortion. Therefore, a stable operation of Nb-modified LiCoO2 half-cell is achieved at 4.6 V (90.9% capacity retention after 200 cycles). Long-life 250 Wh kg-1 and 4.7 V-class 550 Wh kg-1 pouch cells assembled with graphite and thin Li anodes are harvested (both beyond 87% after 1600 and 200 cycles). This multifunctional one-step modification strategy establishes a technological paradigm to pave the way for high-energy density and long-life lithium-ion cathode materials.
RESUMO
BACKGROUND AND AIMS: Cold neutron radiography was applied to directly observe embolism in conduits of liana stems with the aim to evaluate the suitability of this method for studying embolism formation and repair. Potential advantages of this method are a principally non-invasive imaging approach with low energy dose compared with synchrotron X-ray radiation, a good spatial and temporal resolution, and the possibility to observe the entire volume of stem portions with a length of several centimetres at one time. METHODS: Complete and cut stems of Adenia lobata, Aristolochia macrophylla and Parthenocissus tricuspidata were radiographed at the neutron imaging facility CONRAD at the Helmholtz-Zentrum Berlin für Materialien und Energie, with each measurement cycle lasting several hours. Low attenuation gas spaces were separated from the high attenuation (water-containing) plant tissue using image processing. KEY RESULTS: Severe cuts into the stem were necessary to induce embolism. The formation and temporal course of an embolism event could then be successfully observed in individual conduits. It was found that complete emptying of a vessel with a diameter of 100 µm required a time interval of 4 min. Furthermore, dehydration of the whole stem section could be monitored via decreasing attenuation of the neutrons. CONCLUSIONS: The results suggest that cold neutron radiography represents a useful tool for studying water relations in plant stems that has the potential to complement other non-invasive methods.
Assuntos
Radiografia/métodos , Xilema/anatomia & histologia , Aristolochia/anatomia & histologia , Aristolochia/crescimento & desenvolvimento , Nêutrons , Caules de Planta , Vitaceae/anatomia & histologia , Vitaceae/crescimento & desenvolvimentoRESUMO
Ag catalysts show high selectivities in the conversion of carbon dioxide to carbon monoxide during the electrochemical carbon dioxide reduction reaction (CO2RR). Indeed, highly catalytically active porous electrodes with increased surface area achieve faradaic conversion efficiencies close to 100%. To establish reliable structure-property relationships, the results of qualitative structural analysis need to be complemented by a more quantitative approach to assess the overall picture. In this paper, we present a combination of suitable methods to characterize foam electrodes, which were synthesised by the Dynamic Hydrogen Bubble Templation (DHBT) approach to be used for the CO2RR. Physicochemical and microscopic techniques in conjunction with electrochemical analyses provide insight into the structure of the carefully tailored electrodes. By elucidating the morphology, we were able to link the electrochemical deposition at higher current densities to a more homogenous and dense structure and hence, achieve a better performance in the conversion of CO2 to valuable products.