Standardized languages and notations for graphical modelling of patient care processes: a systematic review.

PURPOSE: The importance of working toward quality improvement in healthcare implies an increasing interest in analysing, understanding and optimizing process logic and sequences of activities embedded in healthcare processes. Their graphical representation promotes faster learning, higher retention and better compliance. The study identifies standardized graphical languages and notations applied to patient care processes and investigates their usefulness in the healthcare setting. DATA SOURCES: Peer-reviewed literature up to 19 May 2016. Information complemented by a questionnaire sent to the authors of selected studies. STUDY SELECTION: Systematic review conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. DATA EXTRACTION: Five authors extracted results of selected studies. RESULTS OF DATA SYNTHESIS: Ten articles met the inclusion criteria. One notation and language for healthcare process modelling were identified with an application to patient care processes: Business Process Model and Notation and Unified Modeling Language™. One of the authors of every selected study completed the questionnaire. Users' comprehensibility and facilitation of inter-professional analysis of processes have been recognized, in the filled in questionnaires, as major strengths for process modelling in healthcare. CONCLUSION: Both the notation and the language could increase the clarity of presentation thanks to their visual properties, the capacity of easily managing macro and micro scenarios, the possibility of clearly and precisely representing the process logic. Both could increase guidelines/pathways applicability by representing complex scenarios through charts and algorithms hence contributing to reduce unjustified practice variations which negatively impact on quality of care and patient safety.

Pharmacological regimens for eradication of Helicobacter pylori: an overview of systematic reviews and network meta-analysis.

BACKGROUND: Approximately half of the world's population is infected with Helicobacter pylori (H.pylori), a bacterium shown to be linked with a series of gastrointestinal diseases. A growing number of systematic reviews (SRs) have been published comparing the effectiveness of different treatments for H.pylori infection but have not reached a consistent conclusion. The objective of this study is to provide an overview of SRs of pharmacological therapies for the eradication of H.pylori. METHODS: Major electronic databases were searched to identify relevant SRs published between 2002 and February 2016. Studies were considered eligible if they included RCTs comparing different pharmacological regimens for treating patients diagnosed as H.pylori infected and pooled the eradication rates in a meta-analysis. A modified version of the 'A Measurement Tool to Assess Systematic Reviews' (AMSTAR) was used to assess the methodological quality. A Bayesian random effects network meta-analysis (NMA) was conducted to compare the different proton pump inhibitors (PPI) within triple therapy. RESULTS: 30 SRs with pairwise meta-analysis were included. In triple therapy, the NMA ranked the esomeprazole to be the most effective PPI, followed by rabeprazole, while no difference was observed among the three old generations of PPI for the eradication of H.pylori. When comparing triple and bismuth-based therapy, the relative effectiveness appeared to be dependent on the choice of antibiotics within the triple therapy; moxifloxacin or levofloxacin-based triple therapy were both associated with greater effectiveness than bismuth-based therapy as a second-line treatment, while bismuth-based therapy achieved similar or greater eradication rate compared to clarithromycin-based therapy. Inconsistent findings were reported regarding the use of levofloxacin/moxifloxacin in the first-line treatment; this could be due to the varied resistant rate to different antibiotics across regions and populations. Critical appraisal showed a low-moderate level of overall methodological quality of included studies. CONCLUSIONS: Our analysis suggests that the new generation of PPIs and use of moxifloxacin or levofloxacin within triple therapy as second-line treatment were associated with greater effectiveness. Given the varied antibiotic resistant rate across regions, the appropriateness of pooling results together in meta-analysis should be carefully considered and the recommendation of the choice of antibiotics should be localized.

Biodegradable polylactide/hydroxyapatite nanocomposite foam scaffolds for bone tissue engineering applications.

Supercritical carbon dioxide processing of poly-L-lactide (PLLA)/hydroxyapatite (nHA) nanocomposites was investigated as a means to prepare foams suitable as scaffolds in bone tissue engineering applications. For given foaming parameters, addition of nHA to the PLLA gave reduced cell sizes and improved homogeneity in the size distribution, but did not significantly affect the degree of crystallinity, which remained of the order of 50 wt% in all the foams. The compressive modulus and strength were primarily influenced by the porosity and there was no significant reinforcement of the matrix by the nHA. The mechanical properties of the foams were nevertheless comparable with those of trabecular bone, and by adjusting the saturation pressure and depressurization rate it was possible to generate porosities of about 85 %, an interconnected morphology and cell diameters in the range 200-400 µm from PLLA containing 4.17 vol% nHA, satisfying established geometrical requirements for bone replacement scaffolds.

Lab-on-a-chip for multiplexed biosensing of residual antibiotics in milk.

A multiplexed immunoassay-based antibiotic sensing device integrated in a lab-on-a-chip format is described. The approach is multidisciplinary and involves the convergent development of a multi-antibiotic competitive immunoassay based on sensitive wavelength interrogated optical sensor (WIOS) technology and a polymer-based self-contained microfluidic cartridge. Immunoassay solutions are pressure-driven through external and concerted actuation of a single syringe pump and multiposition valve. Moreover, the use of a novel photosensitive material in a 'one step' fabrication process allowed the rapid fabrication of microfluidic components and interconnection port simultaneously. Pre-filled microfluidic cartridges were used as binary response rapid tests for the simultaneous detection of three antibiotic families - sulfonamides, fluoroquinolones and tetracyclines - in raw milk. For test interpretation, any signal lower than the threshold value obtained for the corresponding Maximum Residue Limit (MRL) concentration (100 microg L(-1)) was considered negative for a given antibiotic. The reliability of the multiplexed detection system was assessed by way of a validation test carried out on a series of six blind milk samples. A test accuracy of 95% was calculated from this experiment. The whole immunoassay procedure is fast (less than 10 minutes) and easy to handle (automated actuation).

Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering.

Bone is a complex porous composite structure with specific characteristics such as viscoelasticity and anisotropy, both in morphology and mechanical properties. Bone defects are regularly filled with artificial tissue grafts, which should ideally have properties similar to those of natural bone. Open cell composite foams made of bioresorbable poly(L-lactic acid) (PLA) and ceramic fillers, hydroxyapatite (HA) or beta-tricalcium phosphate (beta-TCP), were processed by supercritical CO2 foaming. Their internal 3D-structure was then analysed by micro-computed tomography (microCT), which evidenced anisotropy in morphology with pores oriented in the foaming direction. Furthermore compressive tests demonstrated anisotropy in mechanical behaviour, with an axial modulus up to 1.5 times greater than the transverse modulus. Composite scaffolds also showed viscoelastic behaviour with increased modulus for higher strain rates. Such scaffolds prepared by gas foaming of polymer composite materials therefore possess suitable architecture and properties for bone tissue engineering applications.

Biocompatibility of bioresorbable poly(L-lactic acid) composite scaffolds obtained by supercritical gas foaming with human fetal bone cells.

The aim of this investigation was to test the biocompatibility of three-dimensional bioresorbable foams made of poly(L-lactic acid) (PLA), alone or filled with hydroxyapatite (HA) or beta-tricalcium phosphate (beta-TCP), with human primary osteoblasts, using a direct contact method. Porous constructs were processed by supercritical gas foaming, after a melt-extrusion of ceramic/polymer mixture. Three neat polymer foams, with pore sizes of 170, 310, and 600 microm, and two composite foams, PLA/5 wt% HA and PLA/5 wt% beta-TCP, were examined over a 4-week culture period. The targeted application is the bone tissue-engineering field. For this purpose, human fetal and adult bone cells were chosen because of their highly osteogenic potential. The association of fetal bone cells and composite scaffold should lead to in vitro bone formation. The polymer and composite foams supported adhesion and intense proliferation of seeded cells, as revealed by scanning electron microscopy. Cell differentiation toward osteoblasts was demonstrated by alkaline phosphatase (ALP) enzymatic activity, gamma-carboxylated Gla-osteocalcin production, and the onset of mineralization. The addition of HA or beta-TCP resulted in higher ALP enzymatic activity for fetal bone cells and a stronger production of Gla-osteocalcin for adult bone cells.

The Influence of Arginine on the Response of Enamel Matrix Derivative (EMD) Proteins to Thermal Stress: Towards Improving the Stability of EMD-Based Products.

In a current procedure for periodontal tissue regeneration, enamel matrix derivative (EMD), which is the active component, is mixed with a propylene glycol alginate (PGA) gel carrier and applied directly to the periodontal defect. Exposure of EMD to physiological conditions then causes it to precipitate. However, environmental changes during manufacture and storage may result in modifications to the conformation of the EMD proteins, and eventually premature phase separation of the gel and a loss in therapeutic effectiveness. The present work relates to efforts to improve the stability of EMD-based formulations such as Emdogain™ through the incorporation of arginine, a well-known protein stabilizer, but one that to our knowledge has not so far been considered for this purpose. Representative EMD-buffer solutions with and without arginine were analyzed by 3D-dynamic light scattering, UV-Vis spectroscopy, transmission electron microscopy and Fourier transform infrared spectroscopy at different acidic pH and temperatures, T, in order to simulate the effect of pH variations and thermal stress during manufacture and storage. The results provided evidence that arginine may indeed stabilize EMD against irreversible aggregation with respect to variations in pH and T under these conditions. Moreover, stopped-flow transmittance measurements indicated arginine addition not to suppress precipitation of EMD from either the buffers or the PGA gel carrier when the pH was raised to 7, a fundamental requirement for dental applications.

Enthalpic, entropic, and square gradient contributions to the surface energetics of amine-cured epoxy systems.

The evolution of surface tension during polymerization of three amine-cured epoxy systems was investigated. Due to the chemical reaction of the epoxy groups with primary and secondary amines, the energetic status of an epoxy-amine system increased during polymerization. At the same time, the polymerization process induced entropic variations, also contributing to the evolution of surface energetics. A simple relation expressing the surface tension as a function of the bulk energy, the entropy of the system, and the square gradient of the polymer density was derived. The bulk and surface energetics were expressed in terms of solubility parameter and surface tension, respectively. The former was predicted using the Van Krevelen group contribution method, while the latter was directly measured using the Wilhelmy wetting method. Results indicated that, in all the three epoxy-amine systems under investigation, a unique relationship combining the surface tension, the bulk energy, the entropy, and the density square gradient of the system could be used. On the basis of the present study, and taking into account all contributory factors, it was concluded that the enthalpy component to the surface energetics is the dominant contribution.

Nanofibrillated cellulose composite hydrogel for the replacement of the nucleus pulposus.

The swelling and compressive mechanical behavior as well as the morphology and biocompatibility of composite hydrogels based on Tween® 20 trimethacrylate (T3), N-vinyl-2-pyrrolidone (NVP) and nanofibrillated cellulose (NFC) were assessed in the present study. The chemical structure of T3 was verified by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance, and the degree of substitution was found to be around 3. Swelling ratios of neat hydrogels composed of different concentrations of T3 and NVP were found to range from 1.5 to 5.7 with decreasing concentration of T3. Various concentrations of cellulose nanofibrils (0.2-1.6wt.%) were then used to produce composite hydrogels that showed lower swelling ratios than neat ones for a given T3 concentration. Neat and composite hydrogels exhibited a typical nonlinear response under compression. All composite hydrogels showed an increase in elastic modulus compared to neat hydrogel of about 3- to 8-fold, reaching 18kPa at 0% strain and 62kPa at 20% strain for the hydrogel with the highest NFC content. All hydrogels presented a porous and homogeneous structure, with interconnected pore cells of around 100nm in diameter. The hydrogels are biocompatible. The results of this study demonstrate that composite hydrogels reinforced with NFC may be viable as nucleus pulposus implants due to their adequate swelling ratio, which may restore the annulus fibrosus loading, and their increased mechanical properties, which could possibly restore the height of the intervertebral discs.

What static and dynamic properties should slalom skis possess? Judgements by advanced and expert skiers.

Flexural and torsional rigidity are important properties of skis. However, the flexural and torsional rigidity that lead to optimal performance remain to be established. In the present study, four pairs of slalom skis that differed in flexural and torsional rigidity were tested by advanced and expert skiers. Using a 10-item questionnaire, different aspects of the skis' performance were rated on a 9-point scale. For each pair of skis, physical measurements were compared with the ratings of the two groups of skiers. Correlations (Spearman) were then determined between (i) different mechanical properties of the skis (static and dynamic), (ii) subjective assessments of the participants, and (iii) properties of the skis and the participants' assessments. The latter showed that expert skiers rate the aspects of the skis more accurately than advanced skiers. Most importantly, expert skiers are particularly sensitive to torsion of the skis. These results suggest that such highly rated elements should be addressed in future ski designs.