Magnetic Hysteresis in a Monolayer of Oriented 6 nm CsNiCr Prussian Blue Analogue Nanocrystals.

Prussian blue analogue nanocrystals of the CsINiII[CrIII(CN)6] cubic network with 6 nm size were assembled as a single monolayer on highly organized pyrolytic graphite (HOPG). X-ray magnetic circular dichroism (XMCD) studies, at the Ni and Cr L2,3 edges, reveal the presence of an easy plane of magnetization evidenced by an opening of the magnetic hysteresis loop (coercive field of ≈200 Oe) when the magnetic field, B, is at 60° relative to the normal to the substrate. The angular dependence of the X-ray natural linear dichroism (XNLD) reveals both an orientation of the nanocrystals on the substrate and an anisotropy of the electronic cloud of the NiII and CrIII coordination sphere species belonging to the nanocrystals' surface. Ligand field multiplet (LFM) calculations that reproduce the experimental data are consistent with an elongated tetragonal distortion of surface NiII coordination sphere responsible for the magnetic behavior of monolayer.

Photoswitchable 11 nm CsCoFe Prussian Blue Analogue Nanocrystals with High Relaxation Temperature.

Photoswitchable 11 nm nanocrystals with the coordination network Cs{Co[Fe(CN)6]} were obtained using a template-free method. The nanocrystals were recovered from the colloidal solutions as solid materials surrounded by cetyltrimethylammonium (CTA) cations or embedded in the organic polymer polyvinylpyrrolidone (PVP). Complementary magnetic, spectroscopic, and structural techniques, including EPR spectroscopy, reveal a majority (∼70%) of the low-spin and photoactive diamagnetic CoIIIFeII pairs located in the core of the nanocrystals and a mixture of CoIIFeII and CoIIFeIII species present mainly within the shell of the objects. While bulk compounds with similar vacancy concentration do not exhibit noticeable photoinduced charge transfer, the observed photoactivity of the nanocrystals is ascribed to their nanometric size. The relaxation temperature of the photoinduced state shifts upward by ∼55 K when PVP is replaced by CTA. This is ascribed to the larger rigidity of the dense CsCoFe_CTA material, whose metastable state is lower than that for CsCoFe_PVP, leading to a larger relaxation energy barrier and, therefore, to a higher relaxation temperature.

Amyloid Assemblies of Influenza A Virus PB1-F2 Protein Damage Membrane and Induce Cytotoxicity.

PB1-F2 is a small accessory protein encoded by an alternative open reading frame in PB1 segments of most influenza A virus. PB1-F2 is involved in virulence by inducing mitochondria-mediated immune cells apoptosis, increasing inflammation, and enhancing predisposition to secondary bacterial infections. Using biophysical approaches we characterized membrane disruptive activity of the full-length PB1-F2 (90 amino acids), its N-terminal domain (52 amino acids), expressed by currently circulating H1N1 viruses, and its C-terminal domain (38 amino acids). Both full-length and N-terminal domain of PB1-F2 are soluble at pH values ≤6, whereas the C-terminal fragment was found soluble only at pH ≤ 3. All three peptides are intrinsically disordered. At pH ≥ 7, the C-terminal part of PB1-F2 spontaneously switches to amyloid oligomers, whereas full-length and the N-terminal domain of PB1-F2 aggregate to amorphous structures. When incubated with anionic liposomes at pH 5, full-length and the C-terminal part of PB1-F2 assemble into amyloid structures and disrupt membrane at nanomolar concentrations. PB1-F2 and its C-terminal exhibit no significant antimicrobial activity. When added in the culture medium of mammalian cells, PB1-F2 amorphous aggregates show no cytotoxicity, whereas PB1-F2 pre-assembled into amyloid oligomers or fragmented nanoscaled fibrils was highly cytotoxic. Furthermore, the formation of PB1-F2 amyloid oligomers in infected cells was directly reflected by membrane disruption and cell death as observed in U937 and A549 cells. Altogether our results demonstrate that membrane-lytic activity of PB1-F2 is closely linked to supramolecular organization of the protein.

N-terminal domain of PB1-F2 protein of influenza A virus can fold into amyloid-like oligomers and damage cholesterol and cardiolipid containing membranes.

PB1-F2 protein is a factor of virulence of influenza A viruses which increases the mortality and morbidity associated with infection. Most seasonal H1N1 Influenza A viruses express nowadays a truncated version of PB1-F2. Here we show that truncation of PB1-F2 modified supramolecular organization of the protein in a membrane-mimicking environment. In addition, full-length PB1-F2(1-90) and C-terminal PB1-F2 domain (53-90), efficiently permeabilized various anionic liposomes while N-terminal domain PB1-F2(1-52) only lysed cholesterol and cardiolipin containing lipid bilayers. These findings suggest that the truncation of PB1-F2 may impact the pathogenicity of a given virus strain.

Unraveling σ and π Effects on Magnetic Anisotropy in cis-NiA4 B2 Complexes: Magnetization, HF-HFEPR Studies, First-Principles Calculations, and Orbital Modeling.

By using complementary experimental techniques and first-principles theoretical calculations, magnetic anisotropy in a series of five hexacoordinated nickel(II) complexes possessing a symmetry close to C2v , has been investigated. Four complexes have the general formula [Ni(bpy)X2 ]n+ (bpy=2,2'-bipyridine; X2 =bpy (1), (NCS- )2 (2), C2 O42- (3), NO3- (4)). In the fifth complex, [Ni(HIM2 -py)2 (NO3 )]+ (5; HIM2 -py=2-(2-pyridyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazolyl-1-hydroxy), which was reported previously, the two bpy bidentate ligands were replaced by HIM2 -py. Analysis of the high-field, high-frequency electronic paramagnetic resonance (HF-HFEPR) spectra and magnetization data leads to the determination of the spin Hamiltonian parameters. The D parameter, corresponding to the axial magnetic anisotropy, was negative (Ising type) for the five compounds and ranged from -1 to -10 cm-1 . First-principles SO-CASPT2 calculations have been performed to estimate these parameters and rationalize the experimental values. From calculations, the easy axis of magnetization is in two different directions for complexes 2 and 3, on one hand, and 4 and 5, on the other hand. A new method is proposed to calculate the g tensor for systems with S=1. The spin Hamiltonian parameters (D (axial), E (rhombic), and gi ) are rationalized in terms of ordering of the 3 d orbitals. According to this orbital model, it can be shown that 1) the large magnetic anisotropy of 4 and 5 arises from splitting of the eg -like orbitals and is due to the difference in the σ-donor strength of NO3- and bpy or HIM2 -py, whereas the difference in anisotropy between the two compounds is due to splitting of the t2g -like orbitals; and 2) the anisotropy of complexes 1-3 arises from the small splitting of the t2g -like orbitals. The direction of the anisotropy axis can be rationalized by the proposed orbital model.

Electronic properties of single Prussian Blue Analog nanocrystals determined by conductive-AFM.

We report a study of the electron transport (ET) properties at the nanoscale (conductive-AFM denoted as C-AFM hereafter) of individual Prussian Blue Analog (PBA) cubic nanocrystals (NCs) of CsCoIIIFeII, with a size between 15 and 50 nm deposited on HOPG. We demonstrate that these PBA NCs feature an almost size-independent electron injection barrier of 0.41 ± 0.02 eV and 0.27 ± 0.03 eV at the CsCoIIIFeII/HOPG and CsCoIIIFeII/C-AFM tip, respectively, and an intrinsic electron conductivity evolving from a large dispersion between ∼5 × 10-4 and 2 × 10-2 S cm-1 without a clear correlation with the nanocrystal size. The conductivity values measured on individual nanocrystals are up to fifty times higher than those reported on PBA films.

Charge transfer driven by ultrafast spin transition in a CoFe Prussian blue analogue.

Photoinduced charge-transfer is an important process in nature and technology and is responsible for the emergence of exotic functionalities, such as magnetic order for cyanide-bridged bimetallic coordination networks. Despite its broad interest and intensive developments in chemistry and material sciences, the atomic-scale description of the initial photoinduced process, which couples intermetallic charge-transfer and spin transition, has been debated for decades; it has been beyond reach due to its extreme speed. Here we study this process in a prototype cyanide-bridged CoFe system by femtosecond X-ray and optical absorption spectroscopies, enabling the disentanglement of ultrafast electronic and structural dynamics. Our results demonstrate that it is the spin transition that occurs first on the Co site within ~50 fs, and it is this that drives the subsequent Fe-to-Co charge-transfer within ~200 fs. This study represents a step towards understanding and controlling charge-transfer-based functions using light.

Long-range electron transport in Prussian blue analog nanocrystals.

We report electron transport measurements through nano-scale devices consisting of 1 to 3 Prussian blue analog (PBA) nanocrystals connected between two electrodes. We compare two types of cubic nanocrystals, CsCoIIIFeII (15 nm) and CsNiIICrIII (6 nm), deposited on highly oriented pyrolytic graphite and contacted by conducting-AFM. The measured currents show an exponential dependence with the length of the PBA nano-device (up to 45 nm), with low decay factors ß, in the range 0.11-0.18 nm-1 and 0.25-0.34 nm-1 for the CsCoFe and the CsNiCr nanocrystals, respectively. From the theoretical analysis of the current-voltage curve for the nano-scale device made of a single nanoparticle, we deduce that the electron transport is mediated by the localized d bands at around 0.5 eV from the electrode Fermi energy in the two cases. By comparison with previously reported ab initio calculations, we tentatively identify the involved orbitals as the filled Fe(ii)-t2g d band (HOMO) for CsCoFe and the half-filled Ni(ii)-eg d band (SOMO) for CsNiCr. Conductance values measured for multi-nanoparticle nano-scale devices (2 and 3 nanocrystals between the electrodes) are consistent with a multi-step coherent tunneling in the off-resonance regime between adjacent PBAs, a simple model gives a strong coupling (around 0.1-0.25 eV) between the adjacent PBA nanocrystals, mediated by electrostatic interactions.

Magnetic bistability of individual single-molecule magnets grafted on single-wall carbon nanotubes.

A POM to remember: Hexanuclear Fe(III) polyoxometalate (POM) single-molecule magnets (see structure) can be noncovalently assembled on the surface of single-wall carbon nanotubes. Complementary characterization techniques (see TEM image and magnetic hysteresis loops) demonstrate the integrity and bistability of the individual molecules, which could be used to construct single-molecule memory devices.

Rapid and label-free electrochemical DNA biosensor for detecting hepatitis A virus.

Diagnostic systems that can deliver highly specific and sensitive detection of hepatitis A virus (HAV) in food and water are of particular interest in many fields including food safety, biosecurity and control of outbreaks. Our aim was the development of an electrochemical method based on DNA hybridization to detect HAV. A ssDNA probe specific for HAV (capture probe) was designed and tested on DNAs from various viral and bacterial samples using Nested-Reverse Transcription Polymerase Chain Reaction (nRT-PCR). To develop the electrochemical device, a disposable gold electrode was functionalized with the specific capture probe and tested on complementary ssDNA and on HAV cDNA. The DNA hybridization on the electrode was measured through the monitoring of the oxidative peak potential of the indicator tripropylamine by cyclic voltammetry. To prevent non-specific binding the gold surface was treated with 3% BSA before detection. High resolution atomic force microscopy (AFM) confirmed the efficiency of electrode functionalization and on-electrode hybridization. The proposed device showed a limit of detection of 0.65pM for the complementary ssDNA and 6.94fg/µL for viral cDNA. For a comparison, nRT-PCR quantified the target HAV cDNA with a limit of detection of 6.4fg/µL. The DNA-sensor developed can be adapted to a portable format to be adopted as an easy-to- use and low cost method for screening HAV in contaminated food and water. In addition, it can be useful for rapid control of HAV infections as it takes only a few minutes to provide the results.

Surface initiated supplemental activator and reducing agent atom transfer radical polymerization (SI-SARA-ATRP) of 4-vinylpyridine on poly(ethylene terephthalate).

Poly(ethylene terephthalate) (PET) substrates were modified by means of surface-initiated supplemental activator and reducing agent atom transfer radical polymerization (SI-SARA-ATRP) of 4-vinylpyridine (4VP). Substrates were pretreated in order to graft chloromethylbenzene (CMB) units capable of initiating the radical polymerization reaction of 4VP units. Surface characterization techniques, including Water Contact Angle (WCA), Attenuated Total Reflection (ATR), X-ray photoelectron spectroscopy (XPS), Atomic Force Microscopy (AFM) and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) showed a successful grafting of a stable, smooth and homogenous layer of p4VP. This process offers the advantages of a rapid, simplified and low cost strategy to chemically modify polymer substrates with covalently bonded layer of the pH responsive p4VP for different applications. Moreover, by using TOF-SIMS profiling, we were able to track a density gradient along the z-axis generated by the interpenetrating phases of the different layers of the final modified surface. Fact that we correlated to the various positions of initiation sites within the polyethylenimine (PEI) used for PET aminolysis prior to CMB grafting. Our strategy will be used in future work to graft other polymers for different applications where industrial scale viable options are needed.

Self-assembled monolayer formation of a (N5)Fe(ii) complex on gold electrodes: electrochemical properties and coordination chemistry on a surface.

A coordinatively unsaturated FeII complex bearing a pentadentate ligand (N,N',N'-tris(2-pyridyl-methyl)-1,2-diaminoethane) functionalized with a cyclic disulfide group has been prepared in order to graft reactive metal entities as self-assembled monolayers (SAMs) on gold electrodes. Prior to grafting, exogenous ligand exchange has been investigated by cyclic voltammetry (CV) in solution, showing that the nature of the first coordination sphere (N5)FeII-X (X = Cl-, OTf-, MeCN, acetone) can be tuned, thanks to the control of the chemical conditions. The FeII complex has been immobilized on gold electrodes by spontaneous (passive) adsorption as well as by an electro-assisted method. The resulting SAMs were characterised by XPS and AFM analyses. CV experiments implementing these SAMs as working electrodes showed that the first coordination sphere of the grafted FeII complex can be controlled by adjusting the chemical conditions, similarly to the studies in a homogeneous solution. Finally, the supported FeII complex proved to be reactive with superoxide generated at the electrode surface by reduction of dissolved dioxygen. Under the employed conditions, leaking of the metal complex was not observed.

Towards bottom-up nanopatterning of Prussian blue analogues.

Ordered nanoperforated TiO2 monolayers fabricated through sol-gel chemistry were used to grow isolated particles of Prussian blue analogues (PBA). The elaboration of the TiO2/CoFe PBA nanocomposites involves five steps. The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), infrared spectroscopy and X-ray photoelectron spectroscopy (XPS) all along the synthesis process. Selected physico-chemical parameters have been varied in order to determine the key steps of the synthesis process and to optimize it. This study is an important step towards the full control of the fabrication process.

Sequential growth of bistable copper-molybdenum coordination nanolayers on inorganic surfaces.

Sequential growth in solution is a powerful tool to control the growth of coordination networks on surfaces. We used this approach to prepare nanolayers of the bistable copper-molybdenum cyanide-bridged network. The nanolayers were grown on functionalized silicon and on bare platinum surfaces. The use of platinum dots organized on silicon oxide led to the growth of isolated and organized coordination objects. The bistable properties, characteristic of the bulk, have been evidenced for the nanolayers using infrared spectroscopy.

Cyanide-bridged NiCr and alternate NiFe-NiCr magnetic ultrathin films on functionalized Si(100) surface.

Sequential growth in solution (SGS) was performed for the magnetic cyanide-bridged network obtained from the reaction of Ni(H(2)O)(2+) and Cr(CN)(6)(3-) (referred to as NiCr) on a Si(100) wafer already functionalized by a Ni(II) complex. The growth process led to isolated dots and a low coverage of the surface. We used the NiFe network as a template to improve the growth of the magnetic network. We elaborated alternate NiFe (paramagnetic)-NiCr (ferromagnetic) ultrathin films around 6 nm thick. The magnetic behaviour confirmed the alternate structure with the ferromagnetic zones isolated between the paramagnetic ones since the evolution of the blocking temperature is consistent with the evolution of the layers' thickness expected from the SGS process.

Growth and density control of nanometric nickel-iron cyanide-bridged objects on functionalized Si(100) surface.

Isolated nanometric objects of the nickel-iron cyanide-bridged coordination network are obtained by a sequential growth on "molecular seeds" anchored on Si(100) surfaces. Control of the density and the size of the nano-objects is achieved by imposing a growth process without side nucleation.

Assembly of a magnetic polyoxometalate on SWNTs.

Recently, the organisation of magnetic molecules on carbon nanotubes has raised much interest due to their possible interesting contribution to molecular spintronics. In this paper, we describe the assembly on SWNTs of a magnetic polyoxometalate encompassing a single cobalt ion (CoPOM) and its isostructural diamagnetic zinc analogue (ZnPOM). The simple magnetic behaviour of CoPOM and the availability of its diamagnetic counterpart render these POM@NTs systems interesting model compounds for the study of molecular electronics devices based on carbon nanotubes and magnetic molecules. The success and rate of the grafting have been investigated by electron microscopy, electron energy loss spectroscopy, X-ray photoelectron spectroscopy, cyclic voltammetry, Raman scattering and magnetisation measurements. These characterisations altogether demonstrate the preservation of the structural and magnetic properties of the molecules upon functionalisation and the existence of an electronic communication between the molecules and the nanotubes.