RESUMO
The archetypal single electron transfer reductant, samarium(II) diiodide (SmI2, Kagan's reagent), remains one of the most important reducing agents and mediators of radical chemistry after four decades of widespread use in synthesis. While the chemistry of SmI2 is very often unique, and thus the reagent is indispensable, it is almost invariably used in superstoichiometric amounts, thus raising issues of cost and waste. Of the few reports of the use of catalytic SmI2, all require the use of superstoichiometric amounts of a metal coreductant to regenerate Sm(II). Here, we describe a SmI2-catalyzed intermolecular radical coupling of aryl cyclopropyl ketones and alkynes. The process shows broad substrate scope and delivers a library of decorated cyclopentenes with loadings of SmI2 as low as 15 mol %. The radical relay strategy negates the need for a superstoichiometric coreductant and additives to regenerate SmI2. Crucially, our study uncovers an intriguing link between ketone conformation and efficient cross-coupling and thus provides an insight into the mechanism of radical relays involving SmI2. The study lays further groundwork for the future use of the classical reagent SmI2 in contemporary radical catalysis.
RESUMO
Trifluoromethyl sulfoxides are a new class of trifluoromethylthiolating reagent. The sulfoxides engage in metal-free C-H trifluoromethylthiolation with a range of (hetero)arenes. The method is also applicable to the functionalization of important compound classes, such as ligand derivatives and polyaromatics, and in the late-stage trifluoromethylthiolation of medicines and agrochemicals. The isolation and characterization of a sulfonium salt intermediate supports an interrupted Pummerer reaction mechanism.
RESUMO
Benzothiadiazole (BT) directed C-H borylation using BCl3 , followed by B-Cl hydrolysis and Suzuki-Miyaura cross-coupling enables facile access to twisted donor-acceptor compounds. A subsequent second C-H borylation step provides, on arylation of boron, access to borylated highly twisted D-A compounds with a reduced bandgap, or on B-Cl hydrolysis/cross-coupling to twisted D-A-D compounds. Photophysical studies revealed that in this series there is long lifetime emission only when the donor is triphenylamine. Computational studies indicated that the key factor in observing the donor dependent long lifetime emission is the energy gap between the S1 /T2 excited states, which are predominantly intramolecular charge-transfer states, and the T1 excited state, which is predominantly a local excited state on the BT acceptor moiety.
RESUMO
Radical anions generated from urea carbonyls by reductive electron transfer are exploited in carbon-carbon bond formation. New radical cyclizations of urea radical anions deliver complex nitrogen heterocycles and, depending upon the proton source used in the reactions, a chemoselective switch between reaction pathways can deliver two heterobicyclic scaffolds. A computational study has been used to investigate the selectivity of the urea radical processes. Furthermore, radical cyclization cascades involving urea radical anions deliver unusual spirocyclic aminal architectures.
RESUMO
The theory and computation of EPR parameters from first principles has seen a great deal of development over the past two decades. In particular, various techniques for the computation of the electronic g tensor have been implemented in many quantum chemistry packages. These methods have been successfully applied to paramagnetic organic species and transition metal systems. The situation is less well-understood and established in the case of actinide-containing molecules and there is a dearth of experimental data available for validation of computations. In this study quantum chemical techniques have been used to evaluate the g tensor for UV complexes, for which experimental data are available for comparison. The g tensors were calculated using relatively simple, state-averaged complete active space self-consistent field (SA-CASSCF) calculations. This approach is shown to be capable of providing useful accuracy. Aspects of the computations that should be refined to provide a more quantitative approach are discussed. The key features of the underlying electronic structure that influence the computed g values are delineated, providing a simple physical picture of these subtle molecular properties.
RESUMO
The {Cr8 } metallacrown [CrF(O2 Ct Bu)2 ]8 , containing a F-lined internal cavity, shows high selectivity for CO2 over N2 . DFT calculations and absorption studies support the multiple binding of F-groups to the C-center of CO2 (Câ â â F 3.190(9)-3.389(9)â Å), as confirmed by single-crystal X-ray diffraction.
RESUMO
A copper-catalyzed three-component coupling of allenes, bis(pinacolato)diboron, and imines allows regio-, chemo-, and diastereoselective assembly of branched α,ß-substituted-γ-boryl homoallylic amines, that is, products bearing versatile amino, alkenyl, and borane functionality. Alternatively, convenient oxidative workup allows access to α-substituted-ß-amino ketones. A computational study has been used to probe the stereochemical course of the cross-coupling.
RESUMO
Atropisomeric biaryl pyridine and isoquinoline N-oxides were synthesized enantioselectively by dynamic kinetic resolution (DKR) of rapidly racemizing precursors exhibiting free bond rotation. The DKR was achieved by ketoreductase (KRED) catalyzed reduction of an aldehyde to form a configurationally stable atropisomeric alcohol, with the substantial increase in rotational barrier arising from the loss of a bonding interaction between the N-oxide and the aldehyde. Use of different KREDs allowed either the M or P enantiomer to be synthesized in excellent enantiopurity. The enantioenriched biaryl N-oxide compounds catalyze the asymmetric allylation of benzaldehyde derivatives with allyltrichlorosilane.
RESUMO
The application of a new benzannulation reaction for the regiocontrolled synthesis of functionalized chrysenes is reported. The initial benzannulation and the subsequent halogen displacement reactions are both highly regiospecific, which thereby enables the regiocontrolled synthesis of a variety of 4,10-disubstituted chrysenes from commercially available 1,5-dihydroxynaphthalene.
RESUMO
Metallation of hexahydropyrimidopyrimidine (hppH) by [Fe{N(SiMe(3))(2)}(2)] (1) produces the trimetallic iron(II) amide cage complex [{(Me(3)Si)(2)NFe}(2)(hpp)(4)Fe] (2), which contains three iron(II) centers, each of which resides in a distorted tetrahedral environment. An alternative, one-pot route that avoids use of the highly air-sensitive complex 1 is described for the synthesis of the iron(II)-lithium complex [{(Me(3)Si)(2)N}(2)Fe{Li(bta)}](2) (3) (where btaH = benzotriazole), in which both iron(II) centers reside in 3-coordinated pyramidal environments. The structure of 3 is also interpreted in terms of the ring laddering principle developed for alkali metal amides. Magnetic susceptibility measurements reveal that both compounds display very weak antiferromagnetic exchange between the iron(II) centers, and that the iron(II) centers in 2 and 3 possess large negative axial zero-field splittings.
Assuntos
Amidas/química , Compostos Ferrosos/química , Compostos Ferrosos/síntese química , Compostos Heterocíclicos/química , Magnetismo , Ligantes , Modelos Moleculares , Estrutura Molecular , Teoria QuânticaRESUMO
The synthesis, structural and magnetic characterisation of [V(III)(3)O(tmme)(2)(diimine)(2)Cl] [diimine=2,2'-bipyridine (1) or 1,10-phenanthroline (2)] and (HNEt(3))(2)[V(III)(4)O(tmme)(4)] (3) is reported, in which H(3)tmme is tris(mercaptomethyl)ethane, MeC(CH(2)SH)(3), the thiol analogue of the famous tripodal alcohol ligands typified by H(3)thme [tris(hydroxymethyl)ethane, MeC(CH(2)OH)(3)]. Complexes 1 and 3 have "T-shaped" and square topologies, respectively, and the latter is centred on a rare example of a square-planar oxide. The tri-thiolate ligands bind the periphery of the clusters and provide such strong antiferromagnetic exchange pathways that in both cases only a single total spin state is occupied up to room temperature, in the absence of metal-metal bonding. Magnetic data, electronic structure calculations and electrochemical data are reported.
RESUMO
Organometallic single-molecule magnet: Studies of two dimeric organometallic dysprosium compounds reveal one to be the first organometallic single-molecule magnet (see picture). A comparison of the magnetic properties and electronic structures of the two compounds shows that Dyâ â â Dy interactions have a profound influence on the dynamic magnetic behaviour, while having little effect on the static magnetic measurements.
RESUMO
The first example of a stable phenylogous enol, resulting from an extended keto-enol tautomerization across a benzene ring, is described. The enol has been isolated, and its structure was proven by X-ray crystallography. The equilibrium between the keto- and enol-tautomers has been extensively studied and quantified in solution by NMR and UV-vis spectroscopy. The position of equilibrium showed a linear correlation to the Kamlet-Taft solvatochromic scale for solvent H-bond acceptor strength (beta(OmicronEta)), and the equilibrium was proven to be fully dynamic, obeying first-order equilibrium kinetics. To attempt to explain why enolization occurs, at what surprisingly appears to be the expense of aromatic resonance stabilization, various structural features have been considered and explored further with the aid of MO calculations. Nucleus independent chemical shift (NICS) index of aromaticity calculations for each of the rings comprising both tautomers showed that while the central benzene ring loses aromaticity on enolization, the alpha-keto-lactone ring showed an unexpected and significant antiaromaticity in the keto-tautomer, which is by no means intuitive. The loss of stabilization energy associated with the central benzene ring is, therefore, to a certain degree compensated by removal of the antiaromatic destabilization of the alpha-keto-lactone ring rendering the two structures much closer in energy than would otherwise be expected.
RESUMO
A large series of complexes has been synthesized with two chelating, Schiff base azobenzene derivatives connected linearly by coordination to a central nickel(II) or palladium(II) ion. These compounds have the general formulas M(II)(OC(6)H(3)-2-CHNR-4-NâNC(6)H(4)-4-CO(2)Et)(2) [M = Ni; R = n-Bu (3c), n-C(6)H(13) (3d), n-C(8)H(17) (3e), n-C(12)H(25) (3f), Ph (3g), OH (3h), C(6)H(4)-4-CO(2)Et (3i). M = Pd; R = i-Pr (4a), t-Bu (4b), n-Bu (4c), n-C(6)H(13) (4d), n-C(8)H(17) (4e), n-C(12)H(25) (4f), Ph (4g)], M(II)[OC(6)H(3)-2-CHN(n-C(8)H(17))-4-NâNC(6)H(4)-4-CO(2)(n-C(8)H(17))](2) [M = Ni (9), Pd (10)], M(II)[OC(6)H(3)-2-CHN(n-C(8)H(17))-4-NâNC(6)H(4)-4-C(6)H(4)-4-O(n-C(7)H(15))](2) [M = Ni (14), Pd (15)], and M(II)[OC(6)H(3)-2-CHN(CMe(2))-4-NâNC(6)H(4)-4-CO(2)Et](2) [M = Ni (17), Pd (18); the CMe(2) groups are connected]. These compounds have been characterized by using various physical techniques including (1)H NMR spectroscopy and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. Single-crystal X-ray structures have been obtained for two pro-ligands and five complexes (3e, 4e, 14, 15, and 17). The latter always show a strictly square planar arrangement about the metal center, except for the Ni(II) complex of a salen-like ligand (17). In solution, broadened (1)H NMR signals indicate distortions from square planar geometry for the bis-chelate Ni(II) complexes. Electronic absorption spectroscopy and ZINDO_S (Zerner's intermediate neglect of differential overlap) and TD-DFT (time-dependent density functional theory) calculations show that the lowest energy transition has metal-to-ligand charge-transfer character. The λ(max) of this band lies in the range of 409-434 nm in dichloromethane, and replacing Ni(II) with Pd(II) causes small blue-shifts. Dichroic ratios measured in various liquid crystal hosts show complexation-induced increases with Ni(II), but using Pd(II) has a detrimental effect.
RESUMO
Unlike related biphenyl compounds, 2-arylpyridines and 1-arylisoquinolines can be induced to adopt preferentially one of two axial conformations by the presence of a sulfinyl substituent adjacent to the Ar-Ar bond. In the case of more substituted biaryls, the compounds are atropisomeric, and thermodynamic selectivities of about 4:1 may be attained on heating. In the case of less hindered compounds, conformer ratios of up to 20:1 may be achieved. Preferred conformations are deduced by comparison of experimental CD spectra with those derived from theory. The conformational preferences induced by the sulfoxides may be exploited in the asymmetric synthesis of atropisomers, including the ligand QUINAP, by dynamic resolution under thermodynamic control.
RESUMO
The synthesis of two [4]-dendralene compounds incorporating thiophene-(p-nitrophenyl) donor-acceptor units is presented. The dendralenes adopt two different conformers in solution and solid state and the transformation between the structures can be controlled by light and heat. The electron-donating components of the dendralenes are represented by bromothienyl (in 13) and ethylenedioxythiophene(EDOT)-thienyl (in 15) end-groups. The most facile transformation involves the isomerisation of donor-acceptor conjugated systems (a conformers) into structures in which only the thiophenes are conjugated (b conformers), and this process is driven by ambient light. The structures of the two conformers of compound 13 are confirmed by single-crystal X-ray diffraction studies and the structural changes in both compounds have been monitored by 1H NMR spectroscopy and absorption studies. The transformations were found to be first-order processes with rate constants of k=0.0027 s(-1) and k=0.00022 s(-1) for 13 and 15, respectively. Density functional theory calculations at the B3LYP/6-31G* level give credence to the proposed mechanism for the a-->b conversion, which involves photoinduced intramolecular charge transfer (ICT) as the key step. The EDOT derivative (15) can be polymerised by electrochemical oxidation and a combination of cyclic voltammetry and UV/Vis spectroelectrochemical experiments indicate that the a conformer can be trapped and stabilised in the solid state.
RESUMO
The rapid generation of molecular complexity from simple starting materials is a key challenge in synthesis. Enantioselective radical cyclization cascades have the potential to deliver complex, densely packed, polycyclic architectures, with control of three-dimensional shape, in one step. Unfortunately, carrying out reactions with radicals in an enantiocontrolled fashion remains challenging due to their high reactivity. This is particularly the case for reactions of radicals generated using the classical reagent, SmI2. Here, we demonstrate that enantioselective SmI2-mediated radical cyclizations and cascades that exploit a simple, recyclable chiral ligand can convert symmetrical ketoesters to complex carbocyclic products bearing multiple stereocentres with high enantio- and diastereocontrol. A computational study has been used to probe the origin of the enantioselectivity. Our studies suggest that many processes that rely on SmI2 can be rendered enantioselective by the design of suitable ligands.
RESUMO
Poly(3,4-ethylenedithiathiophene) (PEDTT) is a polythiophene-like conjugated polymer in which each thiophene ring is functionalized with an ethylenedithia bridge. As such, PEDTT is the sulfur analogue of the well-known poly(3,4-ethylenedioxythiophene) (PEDOT). Substituent effects, namely the presence of sulfur atoms in PEDTT replacing the oxygen atoms of PEDOT, do not provide a simple explanation for the different electronic properties of the two polymers in the neutral state. This paper reports the spectroscopic properties of PEDTT, studied by in situ techniques such as IR-, Vis-, and electron spin resonance (ESR) spectroelectrochemistry. The differences observed upon electrochemical oxidation of PEDTT and PEDOT (e.g., the different infrared active vibrational band patterns in IR spectroelectrochemistry as well as the different nature of the charged states) are even more marked than those observed in the neutral state. These results, with AM1 calculations, indicate conformational effects as a possible explanation for the different electronic and spectroscopic properties of PEDTT and PEDOT.
RESUMO
A novel polythienylenevinylene (PTV) and two new polythiophenes (PTs), featuring fused tetrathiafulvalene (TTF) units, have been prepared and characterized by ultraviolet-visible (UV-vis) and electron paramagnetic resonance (EPR) spectroelectrochemistry. All polymers undergo two sequential, reversible oxidation processes in solution. Structures in which the TTF species is directly linked to the polymer backbone (2 and 4) display redox behavior which is dictated by the fulvalene system. Once the TTF is spatially removed from the polymer chain by a nonconjugated link (polymer 3), the electroactivity of both TTF and polythiophene moieties can be detected. Computational studies confirm the delocalization of charge over both electroactive centers (TTF and PT) and the existence of a triplet dication intermediate. PTV 4 has a low band gap (1.44 eV), is soluble in common organic solvents, and is stable under ambient conditions. Organic solar cells of polymer 4:[6,6]-phenyl-C(61) butyric acid methyl ester (PCBM) have been fabricated. Under illumination, a photovoltaic effect is observed with a power conversion efficiency of 0.13% under AM1.5 solar simulated light. The onset of photocurrent at 850 nm is consistent with the onset of the pi-pi absorption band of the polymer. Remarkably, UV-vis spectroelectrochemistry of polymer 4 reveals that the conjugated polymer chain remains unchanged during the oxidation of the polymer.
RESUMO
A computational study is presented of a complex of thallium with a neutral ß-triketimine ligand which was found to form dimers with close Tl-Tl interactions. Single point energies, using the crystallographic structures, suggest that the system is bound only when BArF counter ions are included in the calculations. Energy decomposition analysis of the system was carried out in order to investigate the nature of the bonding. Across the methods, calculations show the electrostatic interaction to be repulsive for the dimer with no counter ions, but attractive when BArF counter ions are included. This suggests the metallophilic interaction is counter ion-mediated, requiring the anions to provide favourable electrostatics, even in the case of spatially diffuse and distant counter ions such as the 3,5-bistrifluoromethylphenyl borate ions used here.