Group 11 m-Terphenyl Complexes Featuring Metallophilic Interactions.

A series of group 11 m-terphenyl complexes have been synthesized via a metathesis reaction from the iron(II) complexes (2,6-Mes2C6H3)2Fe and (2,6-Xyl2C6H3)2Fe (Mes = 2,4,6-Me3C6H2; Xyl = 2,6-Me2C6H3). [2,6-Mes2C6H3M]2 (1, M = Cu; 2, M = Ag; 6, M = Au) and [2,6-Xyl2C6H3M]2 (3, M = Cu; 4, M = Ag) are dimeric in the solid state, although different geometries are observed depending on the ligand. These complexes feature short metal-metal distances in the expected range for metallophilic interactions. While 1-4 are readily isolated using this metathetical route, the gold complex 6 is unstable in solution at ambient temperatures and has only been obtained in low yield from the decomposition of (2,6-Mes2C6H3)Au·SMe2 (5). NMR spectroscopic measurements, including diffusion-ordered spectroscopy, suggest that 1-4 remain dimeric in a benzene-d6 solution. The metal-metal interactions have been examined computationally using the Quantum Theory of Atoms in Molecules and by an energy decomposition analysis employing natural orbitals for chemical valence.

Carbene-Induced Rescue of Catalytic Activity in Deactivated Nitrite Reductase Mutant.

The role of His145 in the T1 copper center of nitrite reductase (NiR) is pivotal for the activity of the enzyme. Mutation to a glycine at this position enables the reconstitution of the T1 center by the addition of imidazole as exogenous ligands, however the catalytic activity is only marginally rescued. Here, we demonstrate that the uptake of 1,3-dimethylimidazolylidene as N-heterocyclic carbene (NHC) by the H145G NiR mutant instead of imidazole yields a significantly more active catalyst, suggesting a beneficial role of such C-bonding. Spectroscopic analyses of the formed H145G≈NHC variant as well as an analogue without the catalytic T2 copper center reveal no significant alteration of the T1 site compared to the wild type or the variant containing imidazole as exogenous N-bound surrogate of H145. However, the presence of the carbene doubles the catalytic activity of the mutant compared to the imidazole variant. This enhanced activity has been attributed to a faster electron transfer to the T1 center in the NHC variant and a concomitant change of the rate-limiting step.

Influence of molecular design on radical spin multiplicity: characterisation of BODIPY dyad and triad radical anions.

A strategy to create organic molecules with high degrees of radical spin multiplicity is reported in which molecular design is correlated with the behaviour of radical anions in a series of BODIPY dyads. Upon reduction of each BODIPY moiety radical anions are formed which are shown to have different spin multiplicities by electron paramagnetic resonance (EPR) spectroscopy and distinct profiles in their cyclic voltammograms and UV-visible spectra. The relationship between structure and multiplicity is demonstrated showing that the balance between singlet, biradical or triplet states in the dyads depends on relative orientation and connectivity of the BODIPY groups. The strategy is applied to the synthesis of a BODIPY triad which adopts an unusual quartet state upon reduction to its radical trianion.

Formation of a Copper(II)-Tyrosyl Complex at the Active Site of Lytic Polysaccharide Monooxygenases Following Oxidation by H2O2.

Hydrogen peroxide is a cosubstrate for the oxidative cleavage of saccharidic substrates by copper-containing lytic polysaccharide monooxygenases (LPMOs). The rate of reaction of LPMOs with hydrogen peroxide is high, but it is accompanied by rapid inactivation of the enzymes, presumably through protein oxidation. Herein, we use UV-vis, CD, XAS, EPR, VT/VH-MCD, and resonance Raman spectroscopies, augmented with mass spectrometry and DFT calculations, to show that the product of reaction of an AA9 LPMO with H2O2 at higher pHs is a singlet Cu(II)-tyrosyl radical species, which is inactive for the oxidation of saccharidic substrates. The Cu(II)-tyrosyl radical center entails the formation of significant Cu(II)-(●OTyr) overlap, which in turn requires that the plane of the d(x2-y2) SOMO of the Cu(II) is orientated toward the tyrosyl radical. We propose from the Marcus cross-relation that the active site tyrosine is part of a "hole-hopping" charge-transfer mechanism formed of a pathway of conserved tyrosine and tryptophan residues, which can protect the protein active site from inactivation during uncoupled turnover.

Imidazolylidene Cu(II) Complexes: Synthesis Using Imidazolium Carboxylate Precursors and Structure Rearrangement Pathways.

Copper(II) complexes of type (NHC)CuX2 (X = OAc, Cl, Br, BF4, and NO3) bearing monodentate N-heterocyclic carbenes (NHCs) were prepared by in situ decarboxylation of imidazolium carboxylates as a new synthetic methodology for Cu(II)-NHC complexes. In contrast to the classical deprotonation method, the decarboxylation protocol does not require anaerobic conditions and provides access to complexes with NHCs that are unstable as free carbenes such as N,N'-diisopropyl-imidazolylidene and N,N'-dimethyl-imidazolylidene. Spectroscopic evidence of the formation of the Cu-CNHC bond is provided by UV-vis and EPR, in particular by the 44 MHz carbene hyperfine coupling constant using a 13C-labeled imidazolylidene ligand. A variation of the nature of the carbene N-substituents and the anions bound to the Cu(II) center is possible with this methodology. These variations strongly influence the stability of the complexes. Structural rearrangement and ligand reorganization was observed during recrystallization, which are comprised of heterolytic Cu-CNHC bond dissociation for unstable NHC ligands as well as homolytic Cu-X bond cleavage and disproportionation reactions depending on the nature of the anion X in the copper complex.

Heterobimetallic [NiFe] Complexes Containing Mixed CO/CN- Ligands: Analogs of the Active Site of the [NiFe] Hydrogenases.

The development of synthetic analogs of the active sites of [NiFe] hydrogenases remains challenging, and, in spite of the number of complexes featuring a [NiFe] center, those featuring CO and CN- ligands at the Fe center are under-represented. We report herein the synthesis of three bimetallic [NiFe] complexes [Ni( N2 S2)Fe(CO)2(CN)2], [Ni( S4)Fe(CO)2(CN)2], and [Ni( N2 S3)Fe(CO)2(CN)2] that each contain a Ni center that bridges through two thiolato S donors to a {Fe(CO)2(CN)2} unit. X-ray crystallographic studies on [Ni( N2 S3)Fe(CO)2(CN)2], supported by DFT calculations, are consistent with a solid-state structure containing distinct molecules in the singlet ( S = 0) and triplet ( S = 1) states. Each cluster exhibits irreversible reduction processes between -1.45 and -1.67 V vs Fc+/Fc and [Ni( N2 S3)Fe(CO)2(CN)2] possesses a reversible oxidation process at 0.17 V vs Fc+/Fc. Spectroelectrochemical infrared (IR) and electron paramagnetic resonance (EPR) studies, supported by density functional theory (DFT) calculations, are consistent with a NiIIIFeII formulation for [Ni( N2 S3)Fe(CO)2(CN)2]+. The singly occupied molecular orbital (SOMO) in [Ni( N2 S3)Fe(CO)2(CN)2]+ is based on Ni 3dz2 and 3p S with the S contributions deriving principally from the apical S-donor. The nature of the SOMO corresponds to that proposed for the Ni-C state of the [NiFe] hydrogenases for which a NiIIIFeII formulation has also been proposed. A comparison of the experimental structures, and the electrochemical and spectroscopic properties of [Ni( N2 S3)Fe(CO)2(CN)2] and its [Ni( N2 S3)] precursor, together with calculations on the oxidized [Ni( N2 S3)Fe(CO)2(CN)2]+ and [Ni( N2 S3)]+ forms suggests that the binding of the {Fe(CO)(CN)2} unit to the {Ni(CysS)4} center at the active site of the [NiFe] hydrogenases suppresses thiolate-based oxidative chemistry involving the bridging thiolate S donors. This is in addition to the role of the Fe center in modulating the redox potential and geometry and supporting a bridging hydride species between the Ni and Fe centers in the Ni-C state.

Thionated naphthalene diimides: tuneable chromophores for applications in photoactive dyads.

Varying the degree of thionation of a series of naphthalene diimide (NDI) and naphthalic imide (NI) phenothiazine dyad systems affords a systematic approach for tuning the system's donor-acceptor energy gap. Each dyad was compared to model NDI/NI systems and fully characterised through single crystal X-ray diffraction, NMR, cyclic voltammetry, electron paramagnetic resonance (EPR), transient absorption spectroscopy (TA), time-resolved infra-red spectroscopy (TRIR) and DFT. The measurements reveal that thionation increases both electron affinity of the NDI/NI acceptor dyad component and accessibility of the singly or doubly reduced states. Furthermore, FTIR and TA measurements show that excited state behaviour is greatly affected by thionation of the NDI and induces a decrease in the lifetime of the excited states formed upon the creation of charge-separated states.

Carbene in Cupredoxin Protein Scaffolds: Replacement of a Histidine Ligand in the Active Site Substantially Alters Copper Redox Properties.

N-heterocyclic carbene (NHC) ligands have had a major impact in homogeneous catalysis, however, their potential role in biological systems is essentially unexplored. We replaced a copper-coordinating histidine (His) in the active site of the redox enzyme azurin with exogenous dimethyl imidazolylidene. This NHC rapidly restores the type-1 Cu center, with spectroscopic properties (EPR, UV/Vis) that are identical to those from N-coordination of the His in the wild type. However, the introduction of the NHC markedly alters the redox potential of the metal, which is a key functionality of this blue copper protein. These results suggest that C-bonding for histidine is plausible and a potentially relevant bonding mode of redox-active metalloenzymes in their (transient) active states.

Synthesis and Photophysical Study of a [NiFe] Hydrogenase Biomimetic Compound Covalently Linked to a Re-diimine Photosensitizer.

The synthesis, photophysics, and photochemistry of a linked dyad ([Re]-[NiFe2]) containing an analogue ([NiFe2]) of the active site of [NiFe] hydrogenase, covalently bound to a Re-diimine photosensitizer ([Re]), are described. Following excitation, the mechanisms of electron transfer involving the [Re] and [NiFe2] centers and the resulting decomposition were investigated. Excitation of the [Re] center results in the population of a diimine-based metal-to-ligand charge transfer excited state. Reductive quenching by NEt3 produces the radically reduced form of [Re], [Re](-) (kq = 1.4 ± 0.1 × 10(7) M(-1) s(-1)). Once formed, [Re](-) reduces the [NiFe2] center to [NiFe2](-), and this reduction was followed using time-resolved infrared spectroscopy. The concentration dependence of the electron transfer rate constants suggests that both inter- and intramolecular electron transfer pathways are involved, and the rate constants for these processes have been estimated (kinter = 5.9 ± 0.7 × 10(8) M(-1) s(-1), kintra = 1.5 ± 0.1 × 10(5) s(-1)). For the analogous bimolecular system, only intermolecular electron transfer could be observed (kinter = 3.8 ± 0.5 × 10(9) M(-1) s(-1)). Fourier transform infrared spectroscopic studies confirms that decomposition of the dyad occurs upon prolonged photolysis, and this appears to be a major factor for the low activity of the system toward H2 production in acidic conditions.

Dynamic nuclear polarisation by thermal mixing: quantum theory and macroscopic simulations.

A theory of dynamic nuclear polarisation (DNP) by thermal mixing is suggested based on purely quantum considerations. A minimal 6-level microscopic model is developed to test the theory and link it to the well-known thermodynamic model. Optimal conditions for the nuclear polarization enhancement and effects of inhomogeneous broadening of the electron resonance are discussed. Macroscopic simulations of nuclear polarization spectra displaying good agreement with experiments, involving BDPA and trityl free radicals, are presented.

Homologation and functionalization of carbon monoxide by a recyclable uranium complex.

Carbon monoxide (CO) is in principle an excellent resource from which to produce industrial hydrocarbon feedstocks as alternatives to crude oil; however, CO has proven remarkably resistant to selective homologation, and the few complexes that can effect this transformation cannot be recycled because liberation of the homologated product destroys the complexes or they are substitutionally inert. Here, we show that under mild conditions a simple triamidoamine uranium(III) complex can reductively homologate CO and be recycled for reuse. Following treatment with organosilyl halides, bis(organosiloxy)acetylenes, which readily convert to furanones, are produced, and this was confirmed by the use of isotopically (13)C-labeled CO. The precursor to the triamido uranium(III) complex is formed concomitantly. These findings establish that, under appropriate conditions, uranium(III) can mediate a complete synthetic cycle for the homologation of CO to higher derivatives. This work may prove useful in spurring wider efforts in CO homologation, and the simplicity of this system suggests that catalytic CO functionalization may soon be within reach.

Isolation of Elusive HAsAsH in a Crystalline Diuranium(IV) Complex.

The HAsAsH molecule has hitherto only been proposed tentatively as a short-lived species generated in electrochemical or microwave-plasma experiments. After two centuries of inconclusive or disproven claims of HAsAsH formation in the condensed phase, we report the isolation and structural authentication of HAsAsH in the diuranium(IV) complex [{U(Tren(TIPS) )}2 (µ-η(2) :η(2) -As2 H2 )] (3, Tren(TIPS) =N(CH2 CH2 NSiPr(i) 3 )3 ; Pr(i) =CH(CH3 )2 ). Complex 3 was prepared by deprotonation and oxidative homocoupling of an arsenide precursor. Characterization and computational data are consistent with back-bonding-type interactions from uranium to the HAsAsH π*-orbital. This experimentally confirms the theoretically predicted excellent π-acceptor character of HAsAsH, and is tantamount to full reduction to the diarsane-1,2-diide form.

An Inverted-Sandwich Diuranium µ-η(5):η(5)-Cyclo-P5 Complex Supported by U-P5 δ-Bonding.

Reaction of [U(Tren(TIPS))] [1, Tren(TIPS)=N(CH2CH2NSiiPr3)3] with 0.25 equivalents of P4 reproducibly affords the unprecedented actinide inverted sandwich cyclo-P5 complex [{U(Tren(TIPS))}2(µ-η(5):η(5)-cyclo-P5)] (2). All prior examples of cyclo-P5 are stabilized by d-block metals, so 2 shows that cyclo-P5 does not require d-block ions to be prepared. Although cyclo-P5 is isolobal to cyclopentadienyl, which usually bonds to metals via σ- and π-interactions with minimal δ-bonding, theoretical calculations suggest the principal bonding in the U(P5)U unit is polarized δ-bonding. Surprisingly, the characterization data are overall consistent with charge transfer from uranium to the cyclo-P5 unit to give a cyclo-P5 charge state that approximates to a dianionic formulation. This is ascribed to the larger size and superior acceptor character of cyclo-P5 compared to cyclopentadienyl, the strongly reducing nature of uranium(III), and the availability of uranium δ-symmetry 5f orbitals.

Synthesis and characterization of an f-block terminal parent imido [U═NH] complex: a masked uranium(IV) nitride.

Deprotonation of [U(Tren(TIPS))(NH2)] (1) [Tren(TIPS) = N(CH2CH2NSiPr(i)3)3] with organoalkali metal reagents MR (M = Li, R = Bu(t); M = Na-Cs, R = CH2C6H5) afforded the imido-bridged dimers [{U(Tren(TIPS))(µ-N[H]M)}2] [M = Li-Cs (2a-e)]. Treatment of 2c (M = K) with 2 equiv of 15-crown-5 ether (15C5) afforded the uranium terminal parent imido complex [U(Tren(TIPS))(NH)][K(15C5)2] (3c), which can also be viewed as a masked uranium(IV) nitride. The uranium-imido linkage was found to be essentially linear, and theoretical calculations suggested σ(2)π(4) polarized U-N multiple bonding. Attempts to oxidize 3c to afford the neutral uranium terminal parent imido complex [U(Tren(TIPS))(NH)] (4) resulted in spontaneous disproportionation to give 1 and the uranium-nitride complex [U(Tren(TIPS))(N)] (5); this reaction is a new way to prepare the terminal uranium-nitride linkage and was calculated to be exothermic by -3.25 kcal mol(-1).

[U(III) {N(SiMe2 tBu)2 }3 ]: a structurally authenticated trigonal planar actinide complex.

We report the synthesis and characterization of the uranium(III) triamide complex [U(III) (N**)3 ] [1, N**=N(SiMe2 tBu)2 (-) ]. Surprisingly, complex 1 exhibits a trigonal planar geometry in the solid state, which is unprecedented for three-coordinate actinide complexes that have exclusively adopted trigonal pyramidal geometries to date. The characterization data for [U(III) (N**)3 ] were compared with the prototypical trigonal pyramidal uranium(III) triamide complex [U(III) (N")3 ] (N"=N(SiMe3 )2 (-) ), and taken together with theoretical calculations it was concluded that pyramidalization results in net stabilization for [U(III) (N")3 ], but this can be overcome with very sterically demanding ligands, such as N**. The planarity of 1 leads to favorable magnetic dynamics, which may be considered in the future design of U(III) single-molecule magnets.

Photochemical dihydrogen production using an analogue of the active site of [NiFe] hydrogenase.

Photoproduction of dihydrogen (H2) by a low molecular weight analogue of the active site of [NiFe] hydrogenase has been investigated by reduction of the [NiFe2] cluster, 1, by a photosensitier PS (PS = [ReCl(CO)3(bpy)] or [Ru(bpy)3][PF6]2). Reductive quenching of the (3)MLCT excited state of the photosensitizer by NEt3 or N(CH2CH2OH)3 (TEOA) generates PS(•-), and subsequent intermolecular electron transfer to 1 produces the reduced anionic form of 1. Time-resolved infrared spectroscopy (TRIR) has been used to probe the intermediates throughout the reduction of 1 and subsequent photocatalytic H2 production from [HTEOA][BF4], which was monitored by gas chromatography. Two structural isomers of the reduced form of 1 (1a(•-) and 1b(•-)) were detected by Fourier transform infrared spectroscopy (FTIR) in both CH3CN and DMF (dimethylformamide), while only 1a(•-) was detected in CH2Cl2. Structures for these intermediates are proposed from the results of density functional theory calculations and FTIR spectroscopy. 1a(•-) is assigned to a similar structure to 1 with six terminal carbonyl ligands, while calculations suggest that in 1b(•-) two of the carbonyl groups bridge the Fe centers, consistent with the peak observed at 1714 cm(-1) in the FTIR spectrum for 1b(•-) in CH3CN, assigned to a ν(CO) stretching vibration. Formation of 1a(•-) and 1b(•-) and production of H2 was studied in CH3CN, DMF, and CH2Cl2. Although the more catalytically active species (1a(•-) or 1b(•-)) could not be determined, photocatalysis was observed only in CH3CN and DMF.

Triamidoamine-uranium(IV)-stabilized terminal parent phosphide and phosphinidene complexes.

Reaction of [U(Tren(TIPS) )(THF)][BPh4 ] (1; Tren(TIPS) =N{CH2 CH2 NSi(iPr)3 }3 ) with NaPH2 afforded the novel f-block terminal parent phosphide complex [U(Tren(TIPS) )(PH2 )] (2; U-P=2.883(2) Å). Treatment of 2 with one equivalent of KCH2 C6 H5 and two equivalents of benzo-15-crown-5 ether (B15C5) afforded the unprecedented metal-stabilized terminal parent phosphinidene complex [U(Tren(TIPS) )(PH)][K(B15C5)2 ] (4; UP=2.613(2) Å). DFT calculations reveal a polarized-covalent UP bond with a Mayer bond order of 1.92.

Synthesis, characterization, and reactivity of a uranium(VI) carbene imido oxo complex.

We report the uranium(VI) carbene imido oxo complex [U(BIPM(TMS))(NMes)(O)(DMAP)2] (5, BIPM(TMS) = C(PPh2 NSiMe3)2; Mes = 2,4,6-Me3C6H2; DMAP = 4-(dimethylamino)pyridine) which exhibits the unprecedented arrangement of three formal multiply bonded ligands to one metal center where the coordinated heteroatoms derive from different element groups. This complex was prepared by incorporation of carbene, imido, and then oxo groups at the uranium center by salt elimination, protonolysis, and two-electron oxidation, respectively. The oxo and imido groups adopt axial positions in a T-shaped motif with respect to the carbene, which is consistent with an inverse trans-influence. Complex 5 reacts with tert-butylisocyanate at the imido rather than carbene group to afford the uranyl(VI) carbene complex [U(BIPM(TMS))(O)2(DMAP)2] (6).

Two-electron reductive carbonylation of terminal uranium(V) and uranium(VI) nitrides to cyanate by carbon monoxide.

Two-electron reductive carbonylation of the uranium(VI) nitride [U(Tren(TIPS))(N)] (2, Tren(TIPS)=N(CH2CH2NSiiPr3)3) with CO gave the uranium(IV) cyanate [U(Tren(TIPS))(NCO)] (3). KC8 reduction of 3 resulted in cyanate dissociation to give [U(Tren(TIPS))] (4) and KNCO, or cyanate retention in [U(Tren(TIPS))(NCO)][K(B15C5)2] (5, B15C5=benzo-15-crown-5 ether) with B15C5. Complexes 5 and 4 and KNCO were also prepared from CO and the uranium(V) nitride [{U(Tren(TIPS))(N)K}2] (6), with or without B15C5, respectively. Complex 5 can be prepared directly from CO and [U(Tren(TIPS))(N)][K(B15C5)2] (7). Notably, 7 reacts with CO much faster than 2. This unprecedented f-block reactivity was modeled theoretically, revealing nucleophilic attack of the π* orbital of CO by the nitride with activation energy barriers of 24.7 and 11.3 kcal mol(-1) for uranium(VI) and uranium(V), respectively. A remarkably simple two-step, two-electron cycle for the conversion of azide to nitride to cyanate using 4, NaN3 and CO is presented.

Mechanistic investigations of the Fe(ii) mediated synthesis of squaraines.

The scission and homologation of CO is a fundamental process in the Fischer-Tropsch reaction. However, given the heterogeneous nature of the catalyst and forcing reaction conditions, it is difficult to determine the intermediates of this reaction. Here we report detailed mechanistic insight into the scission/homologation of CO by two-coordinate iron terphenyl complexes. Mechanistic investigations, conducted using in situ monitoring and reaction sampling techniques (IR, NMR, EPR and Mössbauer spectroscopy) and structural characterisation of isolable species, identify a number of proposed intermediates. Crystallographic and IR spectroscopic data reveal a series of migratory insertion reactions from 1Mes to 4Mes. Further studies past the formation of 4Mes suggest that ketene complexes are formed en route to squaraine 2Mes and iron carboxylate 3Mes, with a number of ketene containing structures being isolated, in addition to the formation of unbound, protonated ketene (8). The synthetic and mechanistic studies are supported by DFT calculations.