Computation of the Spatial Distribution of Charge-Carrier Density in Disordered Media.

The space- and temperature-dependent electron distribution n(r,T) determines optoelectronic properties of disordered semiconductors. It is a challenging task to get access to n(r,T) in random potentials, while avoiding the time-consuming numerical solution of the Schrödinger equation. We present several numerical techniques targeted to fulfill this task. For a degenerate system with Fermi statistics, a numerical approach based on a matrix inversion and one based on a system of linear equations are developed. For a non-degenerate system with Boltzmann statistics, a numerical technique based on a universal low-pass filter and one based on random wave functions are introduced. The high accuracy of the approximate calculations are checked by comparison with the exact quantum-mechanical solutions.

Synthesis of Hexabenzocoronene-cored Graphdiyne Nanosheets through Dehydrogenative Coupling on Au(111) Surface.

Thermally-induced dehydrogenative coupling of polyphenylenes on metal surfaces is an important technique to synthesize 𝜋-conjugated carbon nanostructures with atomic precision. However, this protocol has rarely been utilized to fabricate structurally defined carbon nanosheets composed of sp- and sp2-hybridized carbon atoms. Here, we present the synthesis of butadiyne-linked hexabenzocoronenes (HBCs) on Au(111) surfaces as core-expanded graphdiynes. The reaction started from hexa(4-ethylphenyl)benzene, which undergoes dehydrogenation toward hexa(4-vinylphenyl)benzene, followed by planarization to hexabenzocoronene, coupling between the vinyl groups, and further dehydrogenation. In addition to butadiyne linkages, benzene groups were also found as another type of linker. The reaction sequences were monitored by scanning tunneling microscopy and bond-resolved non-contact atomic force microscopy, which disclose the structures of intermediates and final products. In combination with density functional theory simulations, the key steps from ethyl substituents to butadiyne and benzene linkers were elucidated. This is a new on-surface synthesis of core-expanded graphdiynes with unprecedented electronic properties.

Impact of Truncation on Optoelectronic Properties of Azaborole Helicenes.

Herein, we report configurationally stable singly-truncated (ST) and structurally flexible doubly-truncated (DT) helically chiral compounds derived from azabora[7]helicenes by a hypothetical removal of a single or two C=C double bonds. The singly-truncated constitutional isomers were synthesized from either benzoisoquinoline (BIQ) or phenantherene building blocks and the corresponding biaryls in excellent yields to give azabora[5]helicenes with a pendant phenyl ring at a sterically hindered position. These systems highlight the electronic impact of the nitrogen donor substitution position. The compounds with a disrupted BIQ moiety (STN) possess remarkable photoluminescence quantum yields of up to 0.53 in the solid state and a blue emission in solution with dissymmetry factors of up to ca. 3×10-3 . Upon cooling to 79 K all compounds exhibit phosphorescence with lifetimes of up to ca. 0.5 s. A methyl complex of azabora[7]helicene showing excellent configurational stability was used as a chiral inducer embedded in an emissive polymer (F8BT) to produce circularly polarized organic light emitting diodes with an electroluminescence dissymmetry factor gEL of up to 0.54.

Structural Disorder as the Origin of Optical Properties and Spectral Dynamics in Squaraine Nano-Aggregates.

In contrast to regular J- and H-aggregates, thin film squaraine aggregates usually have broad absorption spectra containing both J-and H-like features, which are favorable for organic photovoltaics. Despite being successfully applied in organic photovoltaics for years, a clear interpretation of these optical properties by relating them to specific excited states and an underlying aggregate structure has not been made. In this work, by static and transient absorption spectroscopy on aggregated n-butyl anilino squaraines, we provide evidence that both the red- and blue-shifted peaks can be explained by assuming an ensemble of aggregates with intermolecular dipole-dipole resonance interactions and structural disorder deriving from the four different nearest neighbor alignments─in sharp contrast to previous association of the peaks with intermolecular charge-transfer interactions. In our model, the next-nearest neighbor dipole-dipole interactions may be negative or positive, which leads to the occurrence of J- and H-like features in the absorption spectrum. Upon femtosecond pulse excitation of the aggregated sample, a transient absorption spectrum deviating from the absorbance spectrum emerges. The deviation finds its origin in the excitation of two-exciton states by the probe pulse. The lifetime of the exciton is confirmed by the band integral dynamics, featuring a single-exponential decay with a lifetime of 205 ps. Our results disclose the aggregated structure and the origin of red- and blue-shifted peaks and explain the absence of photoluminescence in squaraine thin films. Our findings underline the important role of structural disorder of molecular aggregates for photovoltaic applications.

Doped but Stable: Spirobisacridine Hole Transporting Materials for Hysteresis-Free and Stable Perovskite Solar Cells.

Four spirobisacridine (SBA) hole-transporting materials were synthesized and employed in perovskite solar cells (PSCs). The molecules bear electronically inert alkyl chains of different length and bulkiness, attached to in-plane N atoms of nearly orthogonal spiro-connected acridines. Di-p-methoxyphenylamine (DMPA) substituents tailored to the central SBA-platform define electronic properties of the materials mimicking the structure of the benchmark 2,2',7,7'-tetrakis(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (spiro-MeOTAD), while the alkyl pending groups affect molecular packing in thin films and affect the long-term performance of PSCs. Devices with SBA-based hole transporting layers (HTL) attain efficiencies on par with spiro-MeOTAD. More importantly, solar cells with the new HTMs are hysteresis-free and demonstrate good operational stability, despite being doped as spiro-MeOTAD. The best performing MeSBA-DMPA retained 88% of the initial efficiency after a 1000 h aging test under constant illumination. The results clearly demonstrate that SBA-based compounds are potent candidates for a design of new HTMs for PSCs with improved longevity.

High fatigue resistance of a photochromic dithienylethene embedded into the pores of a metal-organic framework (MOF).

The incorporation of photochromic dyes into porous metal-organic frameworks (MOFs) is an attractive way to transfer the photochromic properties of the dye to a solid crystalline material. In this work, the well-known P-type chromophore 1,2-bis[2-methylbenzo[b]thiophen-3-yl]-3,3,4,4,5,5-hexafluoro-1-cyclopentene (DTE) is embedded in three different MOFs, namely MOF-5, MIL-68(In), and MIL-68(Ga). The successful filling of the MOF pores with the DTE guest was proven by X-ray powder diffraction, while the amount of the embedded guest molecules was investigated by X-ray photoelectron spectroscopy (XPS), liquid-state NMR and thermal analysis (DSC/TGA). The measurements reveal an unexpectedly low filling of the MOF pores with the DTE guest (e.g. in MOF-5 only every fifth MOF pore is filled with a guest molecule) as well as an inhomogeneous loading throughout the material. Reflection spectra clearly show the transitions of the colourless open-ring and the coloured closed-ring forms of the DTE guest upon UV (λ = 365 nm), blue (λ = 405 nm) and green (λ = 535 nm) light exposure, where the latter is usually suppressed in crystalline DTE. Remarkably, no fatigue after ten switching cycles was observed and a high thermal stability of the coloured closed-ring form (at 50 °C for 1 h) was achieved.

Polymorphic chiral squaraine crystallites in textured thin films.

An enantiomerically pure (R)-2-methylpyrrolidine-based anilino squaraine crystallizes in two chiral polymorphs adopting a monoclinic C2 and an orthorhombic P21 21 21 structure, respectively. By various thin-film preparation techniques, a control of the polymorph formation is targeted. The local texture of the resulting textured thin films is connected to the corresponding optical properties. Special attention is paid to an unusual Davydov splitting, the anisotropic chiroptical response arising from preferred out-of-plane orientation of the crystallites, and the impact of the polymorph specific excitonic coupling.

Observation of Room-Temperature Photoluminescence Blinking in Armchair-Edge Graphene Nanoribbons.

By enhancing the photoluminescence from aligned seven-atom wide armchair-edge graphene nanoribbons using plasmonic nanoantennas, we are able to observe blinking of the emission. The on- and off-times of the blinking follow power law statistics. In time-resolved spectra, we observe spectral diffusion. These findings together are a strong indication of the emission originating from a single quantum emitter. The room temperature photoluminescence displays a narrow spectral width of less than 50 meV, which is significantly smaller than the previously observed ensemble line width of 0.8 eV. From spectral time traces, we identify three optical transitions, which are energetically situated below the lowest bulk excitonic state E11 of the nanoribbons. We attribute the emission to transitions involving Tamm states localized at the end of the nanoribbon. The photoluminescence from a single ribbon is strongly enhanced when its end is in the antenna hot spot resulting in the observed single molecule characteristics of the emission. Our findings illustrate the essential role of the end termination of graphene nanoribbons in light emission and allow us to construct a model for photoluminescence from nanoribbons.

Planar Perovskite Solar Cells with High Open-Circuit Voltage Containing a Supramolecular Iron Complex as Hole Transport Material Dopant.

In perovskite solar cells (PSCs), the most commonly used hole transport material (HTM) is spiro-OMeTAD, which is typically doped by metalorganic complexes, for example, based on Co, to improve charge transport properties and thereby enhance the photovoltaic performance of the device. In this study, we report a new hemicage-structured iron complex, 1,3,5-tris(5'-methyl-2,2'-bipyridin-5-yl)ethylbenzene Fe(III)-tris(bis(trifluoromethylsulfonyl)imide), as a p-type dopant for spiro-OMeTAD. The formal redox potential of this compound was measured as 1.29 V vs. the standard hydrogen electrode, which is slightly (20 mV) more positive than that of the commercial cobalt dopant FK209. Photoelectron spectroscopy measurements confirm that the iron complex acts as an efficient p-dopant, as evidenced in an increase of the spiro-OMeTAD work function. When fabricating planar PSCs with the HTM spiro-OMeTAD doped by 5 mol % of the iron complex, a power conversion efficiency of 19.5 % (AM 1.5G, 100 mW cm-2 ) is achieved, compared to 19.3 % for reference devices with FK209. Open circuit voltages exceeding 1.2 V at 1 sun and reaching 1.27 V at 3 suns indicate that recombination at the perovskite/HTM interface is low when employing this iron complex. This work contributes to recent endeavors to reduce recombination losses in perovskite solar cells.

Solution-Like Behavior of Photoswitchable Spiropyrans Embedded in Metal-Organic Frameworks.

1,3,3-Trimethylindolino-6'-nitrobenzopyrylospiran (SP-1) as an example of a photoswitchable spiropyran was loaded into the pores of different prototypical metal-organic frameworks, namely MOF-5, MIL-68(In), and MIL-68(Ga), by a vapor-phase process. The successful incorporation in the pores of the MOF was proven by X-ray powder diffraction, and the amount of the embedded photoswitchable guest was determined by X-ray photoelectron spectroscopy and elemental analysis. In contrast to the sterically hindered crystalline state, SP-1 embedded in solid MOF hosts shows photoswitching under irradiation with UV light from the spiropyran to its merocyanine form with a nearly complete photoisomerization. Switching can be reversed by heat treatment. These switching properties were confirmed by means of UV/vis and IR spectroscopy. Remarkably, the embedded guest molecules show photoswitching and absorption properties similar to those in the dissolved state, so that MOFs might be considered as "solid solvents" for photoswitchable spiropyrans. In contrast to that, embedment of SP-1 in the smaller pores of MIL-53(Al) was not successful. SP-1 is mainly adsorbed on the surfaces of the MIL-53(Al) particles, which also leads to photoswitching properties.

Metal-Free, Multicomponent Synthesis of Pyrrole-Based π-Conjugated Polymers from Imines, Acid Chlorides, and Alkynes.

Multicomponent coupling reactions (MCRs) are becoming increasingly used in the synthesis of macromolecules, as they can allow the rapid generation of libraries of materials as a method to tune properties. MCRs could prove particularly useful in the synthesis of π-conjugated polymers in which structural changes are necessary for fine-tuning of electronic properties. We describe here the first metal-free multicomponent approach to conjugated polymers. This reaction exploits the coupling of imines, acid chlorides, and (catechyl)PPh to generate phospha-münchnone-containing polymers, which can be converted to poly(pyrroles) via cycloaddition. The platform allows for the efficient synthesis of families of high molecular weight polymers in one step from readily available monomers.

Impact of mesoscale order on open-circuit voltage in organic solar cells.

Structural order in organic solar cells is paramount: it reduces energetic disorder, boosts charge and exciton mobilities, and assists exciton splitting. Owing to spatial localization of electronic states, microscopic descriptions of photovoltaic processes tend to overlook the influence of structural features at the mesoscale. Long-range electrostatic interactions nevertheless probe this ordering, making local properties depend on the mesoscopic order. Using a technique developed to address spatially aperiodic excitations in thin films and in bulk, we show how inclusion of mesoscale order resolves the controversy between experimental and theoretical results for the energy-level profile and alignment in a variety of photovoltaic systems, with direct experimental validation. Optimal use of long-range ordering also rationalizes the acceptor-donor-acceptor paradigm for molecular design of donor dyes. We predict open-circuit voltages of planar heterojunction solar cells in excellent agreement with experimental data, based only on crystal structures and interfacial orientation.

Influence of Solid-State Packing of Dipolar Merocyanine Dyes on Transistor and Solar Cell Performances.

A series of nine dipolar merocyanine dyes has been studied as organic semiconductors in transistors and solar cells. These dyes exhibited single-crystal packing motifs with different dimensional ordering, which can be correlated to the performance of the studied devices. Hereby, the long-range ordering of the dyes in staircase-like slipped stacks with J-type excitonic coupling favors charge transport and improves solar cell performance. The different morphologies of transistor thin films and solar cell active layers were investigated by UV-vis, AFM, and XRD experiments. Selenium-containing donor-acceptor (D-A) dimethine dye 4 showed the highest hole mobility of 0.08 cm(2) V(-1) s(-1). BHJ solar cells based on dye 4 were optimized by taking advantage of the high crystallinity of the donor material and afforded a PCE of up to 6.2%.

Polarity profiling of porous architectures: solvatochromic dye encapsulation in metal-organic frameworks.

Metal-organic frameworks (MOFs) have gathered significant interest due to their tunable porosity leading to diverse potential applications. In this study, we investigate the incorporation of the fluorosolvatochromic dye 2-butyl-5,6-dimethoxyisoindoline-1,3-dione ([double bond, length as m-dash]Phth) into various MOF structures as a means to assess the polarity of these porous materials. As a purely inorganic compound, zeolite Y was tested for comparison. The fluorosolvatochromic behavior of Phth, which manifests as changes in its emission spectra in response to solvent polarity, provides a sensitive probe for characterizing the local environment within the MOF pores. Through systematic variation of the MOF frameworks, we demonstrate the feasibility of using (fluoro-)solvatochromic dyes as probes for assessing the polarity gradients within MOF structures. Additionally, the fluorosolvatochromic response was studied as a function of loading amount. Our findings not only offer insights into the interplay between MOF architecture and guest molecule interactions but also present a promising approach for the rational design and classification of porous materials based on their polarity properties.

Orientation distributions of vacuum-deposited organic emitters revealed by single-molecule microscopy.

The orientation of luminescent molecules in organic light-emitting diodes strongly influences device performance. However, our understanding of the factors controlling emitter orientation is limited as current measurements only provide ensemble-averaged orientation values. Here, we use single-molecule imaging to measure the transition dipole orientation of individual emitter molecules in a state-of-the-art thermally evaporated host and thereby obtain complete orientation distributions of the hyperfluorescence-terminal emitter C545T. We achieve this by realizing ultra-low doping concentrations (10-6 wt%) of C545T and minimising background levels to reliably measure its photoluminescence. This approach yields the orientation distributions of >1000 individual emitter molecules in a system relevant to vacuum-processed devices. Analysis of solution- and vacuum-processed systems reveals that the orientation distributions strongly depend on the nanoscale environment of the emitter. This work opens the door to attaining unprecedented information on the factors that determine emitter orientation in current and future material systems for organic light-emitting devices.

Chiral self-organized single 2D-layers of tetramers from a functional donor-acceptor molecule by the surface template effect.

The ability to control the structural properties of molecular layers is a key for the design and preparation of organic electronic devices. While microscopic growth studies of planar, rigid and symmetric π-conjugated molecules have been performed to a larger extent, this is less the case for elongated donor-acceptor molecules with flexible functional groups, which are particularly interesting due to their high dipole moments. Prototypical molecules of this type are merocyanines (MCs), which have been widely studied for the use as efficient absorbers in organic photodetectors. For maximized light absorption and optimized electronic properties the molecular arrangement which is affected by the initial assembly of the films at the supporting substrate interface is decisive. The situation deserves special attention, when the surface nucleation leads to so far not known and bulk-unlike aggregates. Here, we report on the growth of a typical MC (HB238) on the Ag(100) surface, serving as the substrate. In the energetically preferred phase, the molecules adsorb in a face-on geometry and organize in tetramers with a circular dipole arrangement. The tetramers further self-order in large, enantiopure domains with a periodicity that is commensurate to the Ag(100) surface, likely due to a specific bonding of the thiophene and thiazol rings to the Ag surface. Using scanning tunneling microscopy (STM) in combination with low energy electron diffraction we derive the detailed structure of the tetramers. The center of the tetramer, which is most prominent in STM images, consists of four upward pointing tert-butyl groups from four molecules. It is encircled by a ring of four hydrogen bonds between terminal CN-groups and thiophene rings on neighboring molecules. In parallel, the surface interaction modifies the intramolecular dipole, which is revealed from photoemission spectroscopy. Hence, this example shows how the surface template effect leads to an unforeseen molecular organization which is considerably more complex compared to that in the bulk phases of HB238, which feature paired dipoles.

Aggregation-dependent photovoltaic properties of squaraine/PC61BM bulk heterojunctions.

In this study, we investigated bulk-heterojunction solar cells composed of PC(61)BM and squaraine dyes with different donor subunits. Both, H- and J-aggregates, have been observed for the squaraine dyes in the mixture, even for the same dye depending on the annealing conditions of the blends. Supramolecular organization of the squaraine dyes noticeably affects solar cell performance. The J-aggregate exhibits a red-shift of the absorption maximum that results in a significant increase in the short-circuit current and decrease in the open-circuit voltage compared to the as-cast device. The H-aggregate shows a blue-shift in the absorption maximum and concomitantly only a moderate increase in the short-circuit current as well as an increase in the open-circuit voltage. The course of domain growth during annealing was monitored by local photocurrent mapping.

Energy Scales of Compositional Disorder in Alloy Semiconductors.

The study of semiconductor alloys is currently experiencing a renaissance. Alloying is often used to tune the material properties desired for device applications. It allows, for instance, to vary in broad ranges the band gaps responsible for the light absorption and light emission spectra of the materials. The price for this tunability is the extra disorder caused by alloying. In this mini-review, we address the features of the unavoidable disorder caused by statistical fluctuations of the alloy composition along the device. Combinations of material parameters responsible for the alloy disorder are revealed, based solely on the physical dimensions of the input parameters. Theoretical estimates for the energy scales of the disorder landscape are given separately for several kinds of alloys desired for applications in modern optoelectronics. Among these are perovskites, transition-metal dichalcogenide monolayers, and organic semiconductor blends. While theoretical estimates for perovskites and inorganic monolayers are compatible with experimental data, such a comparison is rather controversial for organic blends, indicating that more research is needed in the latter case.

Ni, Pd, and Pt complexes of a tetradentate dianionic thiosemicarbazone-based O

New tetradentate phenolate O^N^N^S thiosemicarbazone (TSC) ligands and their Ni(ii), Pd(ii) and Pt(ii) complexes were studied. The diamagnetic and square planar configured orange or red complexes show reversible reductive electrochemistry and in part reversible oxidative electrochemistry at very moderate potentials. DFT calculations show essentially pyridyl-imine centred lowest unoccupied molecular orbitals (LUMO) while the highest occupied molecular orbitals (HOMO) receive contributions from the phenolate moiety, the metal d orbitals and the TSC thiolate atom in keeping with UV-vis spectroelectrochemistry. DFT calculations in conjunction with IR spectra showed details of the molecular structures, the UV-vis absorptions were modelled through TD-DFT calculation with very high accuracy. UPS is fully consistent with UV-vis absorption and TD-DFT calculated data and shows decreasing HOMO-LUMO gaps along the series Pd > Pt > Ni.

Tunneling current modulation in atomically precise graphene nanoribbon heterojunctions.

Lateral heterojunctions of atomically precise graphene nanoribbons (GNRs) hold promise for applications in nanotechnology, yet their charge transport and most of the spectroscopic properties have not been investigated. Here, we synthesize a monolayer of multiple aligned heterojunctions consisting of quasi-metallic and wide-bandgap GNRs, and report characterization by scanning tunneling microscopy, angle-resolved photoemission, Raman spectroscopy, and charge transport. Comprehensive transport measurements as a function of bias and gate voltages, channel length, and temperature reveal that charge transport is dictated by tunneling through the potential barriers formed by wide-bandgap GNR segments. The current-voltage characteristics are in agreement with calculations of tunneling conductance through asymmetric barriers. We fabricate a GNR heterojunctions based sensor and demonstrate greatly improved sensitivity to adsorbates compared to graphene based sensors. This is achieved via modulation of the GNR heterojunction tunneling barriers by adsorbates.