The validity of using inertial measurement units to monitor the torso and pelvis sagittal plane motion of elite rowers.

In elite sport, inertial measurement units (IMUs) are being used increasingly to measure movement in-field. IMU data commonly sought are body segment angles as this gives insights into how technique can be altered to improve performance and reduce injury risk. The purpose of this was to assess the validity of IMU use in rowing and identify if IMUs are capable of detecting differences in sagittal torso and pelvis angles that result from changes in stroke rates. Eight elite female rowers participated. Four IMUs were positioned along the torso and over the pelvis of each athlete. Reflective markers surrounded each IMU which were used to compute gold-standard data. Maxima, minima, angle range and waveforms for ten strokes at rates of 20, 24, 28 and 32 strokes per minute were analysed. Root mean square errors as a percentage of angle range fell between 1.44% and 8.43%. In most cases when significant differences (p < 0.05) in the angles were detected between stroke rates, this was observed in both IMU and gold-standard angle data. These findings suggest that IMUs are valid for measuring torso and pelvis angles when rowing and are capable of detecting differences that result from changes in stroke rate.

Lower Body Stiffness Modulation Strategies in Well Trained Female Athletes.

Millett, EL, Moresi, MP, Watsford, ML, Taylor, PG, and Greene, DA. Lower body stiffness modulation strategies in well trained female athletes. J Strength Cond Res 30(10): 2845-2856, 2016-Lower extremity stiffness quantifies the relationship between the amount of leg compression and the external load to which the limb are subjected. This study aimed to assess differences in leg and joint stiffness and the subsequent kinematic and kinetic control mechanisms between athletes from various training backgrounds. Forty-seven female participants (20 nationally identified netballers, 13 high level endurance athletes and 14 age and gender matched controls) completed a maximal unilateral countermovement jump, drop jump and horizontal jump to assess stiffness. Leg stiffness, joint stiffness and associated mechanical parameters were assessed with a 10 camera motion analysis system and force plate. No significant differences were evident for leg stiffness measures between athletic groups for any of the tasks (p = 0.321-0.849). However, differences in joint stiffness and its contribution to leg stiffness, jump performance outcome measures and stiffness control mechanisms were evident between all groups. Practitioners should consider the appropriateness of the task utilised in leg stiffness screening. Inclusion of mechanistic and/or more sports specific tasks may be more appropriate for athletic groups.

Variations in lower body stiffness during sports-specific tasks in well-trained female athletes.

The present study aimed to assess the differences in leg stiffness and the associated performance variables between athletes from various training backgrounds during tasks relevant to athletic training. Forty-seven female participants (20 nationally identified netballers, 13 high-level endurance athletes and 14 age-matched controls) completed a sprint, anticipated sidestep change of direction and unilateral repetitive hopping task to assess leg stiffness and the relationship of stiffness between the different tasks. Leg stiffness and performance variables were evaluated with a 10-camera motion analysis system and force plate, and leg stiffness was derived through the McMahon and Cheng methodology (1990). Significant differences were evident in leg stiffness, and the contributing performance variables between groups across all assessed tasks (p < 0.001-0.017). Furthermore, results indicated the control group displayed no leg stiffness relationship between the evaluated tasks, while the stiffness relationship between tasks within athletic populations reflected training-specific demands of athletes. The results of this study indicated that the athletic training background of individuals may contribute to inherent leg stiffness differences between groups. Furthermore, the stiffness relationship observed between tasks suggests practitioners should take care in the selection of task used to monitor leg stiffness from a performance or injury risk perspective.

Comparing inertial measurement units and marker-based biomechanical models during dynamic rotation of the torso.

Inertial measurement units (IMUs) enable human movements to be captured in the field and are being used increasingly in high performance sport. One key metric that can be derived from IMUs are relative angles of body segments which are important for monitoring form in many sports. The purpose of this study was to (a) examine the validity of relative angles derived from IMUs placed on the torso and pelvis; and (b) determine optimal positioning for torso mounted sensors such that the IMU relative angles match closely with gold standard torso-pelvis and thorax-pelvis relative angle data derived from an optoelectronic camera system. Seventeen adult participants undertook a variety of motion tasks. Four IMUs were positioned on the torso and one was positioned on the pelvis between the posterior superior iliac spines. Reflective markers were positioned around each IMU and over torso and pelvis landmarks. Results showed that the IMUs are valid with the root mean square errors expressed as a percentage of the angle range (RMSE%) ranging between 1% and 7%. Comparison between the IMU relative angles and the torso-pelvis and thorax-pelvis relative angles showed there were moderate to large differences with RMSE% values ranging between 4% and 57%. IMUs are highly accurate at measuring orientation data; however, further work is needed to optimise positioning and modelling approaches so IMU relative angles align more closely with relative angles derived using traditional motion capture methods.

A Surrogate Technique for Investigating Deterministic Dynamics in Discrete Human Movement.

Entropy is an effective tool for investigation of human movement variability. However, before applying entropy, it can be beneficial to employ analyses to confirm that observed data are not solely the result of stochastic processes. This can be achieved by contrasting observed data with that produced using surrogate methods. Unlike continuous movement, no appropriate method has been applied to discrete human movement. This article proposes a novel surrogate method for discrete movement data, outlining the processes for determining its critical values. The proposed technique reliably generated surrogates for discrete joint angle time series, destroying fine-scale dynamics of the observed signal, while maintaining macro structural characteristics. Comparison of entropy estimates indicated observed signals had greater regularity than surrogates and were not only the result of stochastic but also deterministic processes. The proposed surrogate method is both a valid and reliable technique to investigate determinism in other discrete human movement time series.