Highly porous nature of a primitive asteroid revealed by thermal imaging.

Carbonaceous (C-type) asteroids1 are relics of the early Solar System that have preserved primitive materials since their formation approximately 4.6 billion years ago. They are probably analogues of carbonaceous chondrites2,3 and are essential for understanding planetary formation processes. However, their physical properties remain poorly known because carbonaceous chondrite meteoroids tend not to survive entry to Earth's atmosphere. Here we report on global one-rotation thermographic images of the C-type asteroid 162173 Ryugu, taken by the thermal infrared imager (TIR)4 onboard the spacecraft Hayabusa25, indicating that the asteroid's boulders and their surroundings have similar temperatures, with a derived thermal inertia of about 300 J m-2 s-0.5 K-1 (300 tiu). Contrary to predictions that the surface consists of regolith and dense boulders, this low thermal inertia suggests that the boulders are more porous than typical carbonaceous chondrites6 and that their surroundings are covered with porous fragments more than 10 centimetres in diameter. Close-up thermal images confirm the presence of such porous fragments and the flat diurnal temperature profiles suggest a strong surface roughness effect7,8. We also observed in the close-up thermal images boulders that are colder during the day, with thermal inertia exceeding 600 tiu, corresponding to dense boulders similar to typical carbonaceous chondrites6. These results constrain the formation history of Ryugu: the asteroid must be a rubble pile formed from impact fragments of a parent body with microporosity9 of approximately 30 to 50 per cent that experienced a low degree of consolidation. The dense boulders might have originated from the consolidated innermost region or they may have an exogenic origin. This high-porosity asteroid may link cosmic fluffy dust to dense celestial bodies10.

Low-Temperature Chiral Crystal Structure and Superconductivity in (Pt0.2Ir0.8)3Zr5.

We report the observation of superconductivity in (Pt0.2Ir0.8)3Zr5 with a chiral space group (P6122) at low temperatures. The bulk nature of the superconductivity at a transition temperature of 2.2 K was confirmed using specific heat measurements. We revealed that (Pt0.2Ir0.8)3Zr5 obeys the weak-coupling Bardeen-Cooper-Schrieffer model, and the dominant mechanism in the upper critical field is the orbital pair-breaking limit rather than the Pauli-Clogston limit. This indicates that the antisymmetric spin-orbit coupling caused by the chiral crystal structure does not significantly affect the superconductivity of (Pt0.2Ir0.8)3Zr5.

Nickel Carbide Nanoparticle Catalyst for Selective Hydrogenation of Nitriles to Primary Amines.

Despite its unique physicochemical properties, the catalytic application of nickel carbide (Ni3 C) in organic synthesis is rare. In this study, we report well-defined nanocrystalline Ni3 C (nano-Ni3 C) as a highly active catalyst for the selective hydrogenation of nitriles to primary amines. The activity of the aluminum-oxide-supported nano-Ni3 C (nano-Ni3 C/Al2 O3 ) catalyst surpasses that of Ni nanoparticles. Various aromatic and aliphatic nitriles and dinitriles were successfully converted to the corresponding primary amines under mild conditions (1 bar H2 pressure). Furthermore, the nano-Ni3 C/Al2 O3 catalyst was reusable and applicable to gram-scale experiments. Density functional theory calculations suggest the formation of polar hydrogen species on the nano-Ni3 C surface, which were attributed to the high activity of nano-Ni3 C towards nitrile hydrogenation. This study demonstrates the utility of metal carbides as a new class of catalysts for liquid-phase organic reactions.

Nitrogen-Rich Molybdenum Nitride Synthesized in a Crucible under Air.

The triple bond in N2 is significantly stronger than the double bond in O2, meaning that synthesizing nitrogen-rich nitrides typically requires activated nitrogen precursors, such as ammonia, plasma-cracked atomic nitrogen, or high-pressure N2. Here, we report a synthesis of nitrogen-rich nitrides under ambient pressure and atmosphere. Using Na2MoO4 and dicyandiamide precursors, we synthesized nitrogen-rich γ-Mo2N3 in an alumina crucible under an ambient atmosphere, heated in a box furnace between 500 and 600 °C. Byproducts of this metathesis reaction include volatile gases and solid Na(OCN), which can be washed away with water. X-ray diffraction and neutron diffraction showed Mo2N3 with a rock salt structure having cation vacancies, with no oxygen incorporation, in contrast to the more common nitrogen-poor rock salt Mo2N with anion vacancies. Moreover, an increase in temperature to 700 °C resulted in molybdenum oxynitride, Mo0.84N0.72O0.27. This work illustrates the potential for dicyandiamide as an ambient-temperature metathesis precursor for an increased effective nitrogen chemical potential under ambient conditions. The classical experimental setting often used for solid-state oxide synthesis, therefore, has the potential to expand the nitride chemistry.

Fe Site Order and Magnetic Properties of Fe1/4NbS2.

Transition-metal dichalcogenides (TMDs) have long been attractive to researchers for their diverse properties and high degree of tunability. Most recently, interest in magnetically intercalated TMDs has resurged due to their potential applications in spintronic devices. While certain compositions featuring the absence of inversion symmetry such as Fe1/3NbS2 and Cr1/3NbS2 have garnered the most attention, the diverse compositional space afforded through the host matrix composition as well as intercalant identity and concentration is large and remains relatively underexplored. Here, we report the magnetic ground state of Fe1/4NbS2 that was determined from low-temperature neutron powder diffraction as an A-type antiferromagnet. Despite the presence of overall inversion symmetry, the pristine compound manifests spin polarization induced by the antiferromagnetic order at generic k points, based on density functional theory band-structure calculations. Furthermore, by combining synchrotron diffraction, pair distribution function, and magnetic susceptibility measurements, we find that the magnetic properties of Fe1/4NbS2 are sensitive to the Fe site order, which can be tuned via electrochemical lithiation and thermal history.

Combustion Reactions between Transition-Metal Chlorides and Sodium Amide and Their Ignition Temperature.

Combustion reactions between metal chlorides and sodium amide proceed in a short time; however, these reactions must be carried out with appropriate safety measures. Investigating their ignition temperatures would facilitate safe handling and give kinetic insights about the reaction between powders. Here, we investigated the products of the reactions between metal chlorides and sodium amide and measured their ignition temperatures. The products were mainly composed of nitrides, metals, and sodium chloride. The reactions of 4d and 5d metal chlorides initiated the reaction below room temperature, while 3d metal chlorides, except copper chloride, initiated the reaction upon heating. We found the correlation between the ignition temperatures and the reaction energies of the combustion reaction.

Formation Mechanism of ß-Li3PS4 through Decomposition of Complexes.

ß-Li3PS4 is a solid electrolyte with high Li+ conductivity, applicable to sulfide-based all-solid-state batteries. While a ß-Li3PS4-synthesized by solid-state reaction forms only in a narrow 300-450 °C temperature range upon heating, ß-Li3PS4 is readily available by liquid-phase synthesis through low-temperature thermal decomposition of complexes composed of PS43- and various organic solvents. However, the conversion mechanism of ß-Li3PS4 from these complexes is not yet understood. Herein, we proposed the synthesis mechanism of ß-Li3PS4 from Li3PS4·acetonitrile (Li3PS4·ACN) and Li3PS4·1,2-dimethoxyethane (Li3PS4·DME), whose structural similarity with ß-Li3PS4 would reduce the nucleation barrier for the formation of ß-Li3PS4. Synchrotron X-ray diffraction clarified that both complexes possess similar layered structures consisting of alternating Li2PS4- and Li+-ACN/DME layers. ACN/DME was removed from these complexes upon heating, and rotation of the PS4 tetrahedra induced a uniaxial compression to form the ß-Li3PS4 framework.

Doping-Induced Polymorph and Carrier Polarity Changes in Thermoelectric Ag(Bi,Sb)Se2 Solid Solution.

Silver bismuth diselenide (AgBiSe2) is an n-type thermoelectric material that exhibits a complex structural phase transition from the hexagonal to cubic phase, while silver antimony diselenide (AgSbSe2) is a p-type thermoelectric material that crystallizes in the cubic phase at all temperatures. Here, we investigate the crystal structure and thermoelectric properties of Ag(Bi,Sb)Se2 solid solution, employing AgBi0.9Sb0.1Se2 and AgBi0.7Sb0.3Se2 as representative samples. The carrier polarity of AgBi0.9Sb0.1Se2 is converted from the n-type to p-type by Pb doping, accompanied by a polymorphic change to the cubic phase. It is difficult to obtain highly conductive p-type hexagonal AgBiSe2-based materials, although first-principles calculations predict high-performance thermoelectric properties for these systems. We also demonstrate that cubic AgBi0.7Sb0.3Se2 undergoes a polymorphic change to the hexagonal phase upon Nb doping. The present study show that polymorphic changes inevitably occurred upon Pb/Nb doping to optimize thermoelectric properties of Ag(Bi,Sb)Se2 solid solution.

Timing of post-resistance exercise nutrient ingestion: effects on gastric emptying and glucose and amino acid responses in humans.

This study examined the effects of post-resistance exercise protein ingestion timing on the rate of gastric emptying (GE) and blood glucose (BG) and plasma branched-chain amino acid (BCAA) responses. In all, eleven healthy participants randomly ingested 400 ml of a nutrient-rich drink containing 12 g carbohydrates and 20 g protein at rest (Con), at 5 min (post-exercise (PE)-5) or at 30 min (PE-30) after a single bout of strenuous resistance exercises. The first and second sets comprised ten repetitions at 50 % of each participant's one-repetition maximum (1RM). The third, fourth and fifth sets comprised ten repetitions at 75 % of 1RM, and the sixth set involved repeated repetitions until exhaustion. Following ingestion of the nutrient-rich drink, we assessed the GE rate using 13C-sodium acetate breath test and evaluated two parameters according to the T max-calc (time when the recovery per hour is maximised), which is a standard analytical method, and T 1/2 (time when the total cumulative dose of [13CO2] reaches one-half). T max-calc and T 1/2 were slower for the PE-5 condition than for either the PE-30 or Con condition (T max-calc; Con: 53 (sd 7) min, PE-5: 83 (sd 16) min, PE-30: 62 (sd 9) min, T 1/2; Con: 91 (sd 7) min, PE-5: 113 (sd 21) min, PE-30: 91 (sd 11) min, P<0·05). BG and BCAA responses were also slower for the PE-5 condition than for either the PE-30 or Con condition. Ingesting nutrients immediately after strenuous resistance exercise acutely delayed GE, which affected BG and plasma BCAA levels in blood circulation.

Explosive Reaction for Barium Niobium Perovskite Oxynitride.

An intense exothermic and explosive reaction between Ba(OH)2, NbCl5, and NaNH2 produced barium niobium perovskite oxynitride in seconds. The addition of hexane reduced the risk of explosion during mixing of the starting materials, and subsequent heat treatment at 498 K in hexane allowed control of this exothermic reaction, leading to formation of the perovskite oxynitride with fewer impurities. The synthesis of barium tantalum perovskite oxynitride under similar reaction conditions was successful.

Structural and Electrochemical Evaluation of Three- and Two-Dimensional Organohalide Perovskites and Their Influence on the Reversibility of Lithium Intercalation.

Organic-inorganic hybrid perovskite materials have recently been investigated in a variety of applications, including solar cells, light emitting devices (LEDs), and lasers because of their impressive semiconductor properties. Nevertheless, the perovskite structure has the ability to host extrinsic elements, making its application in the battery field possible. During the present study, we fabricated and investigated the electrochemical properties of three-dimensional (3D) methylammonium lead mixed-halide CH3NH3PbI3- xBr x and two-dimensional (2D) propylammonium-methlylammonium lead bromide (CH3NH3)2(CH3(CH2)2NH3)2Pb3Br10 hybrid perovskite thin films as electrode materials for Li-ion batteries. These electrodes were obtained by solution processing at 100 °C. CH3NH3PbBr3 achieved high discharge/charge capacities of ∼500 mA h g-1 /160 mA h g-1 that could account also for other processes taking place during the Li intercalation. It was also found that bromine plays an important role for lithium intercalation, while the new 2D (CH3NH3)2(CH3(CH2)2NH3)2Pb3Br10 with a layered structure allowed reversibility of the lithium insertion-extraction of 100% with capacities of ∼375 mA h g-1 in the form of a thin film. Results suggest that tuning the composition of these materials can be used to improve intercalation capacities, while modification from 3D to 2D layered structures contributes to improving lithium extraction. The mechanism of the lithium insertion-extraction may consist of an intercalation mechanism in the hybrid material accompanying the alloying-dealloying process of the Li xPb intermetallic compounds. This work contributes to revealing the relevance of both composition and structure of potential hybrid perovskite materials as future thin film electrode materials with high capacity and compositional versatility.

Crystal Structure and Superconductivity of Tetragonal and Monoclinic Ce1- xPr xOBiS2.

Ce1- xPr xOBiS2 powders and Ce0.5Pr0.5OBiS2 single crystals were synthesized and their structure and superconductive properties were examined by X-ray diffraction, X-ray absorption, electronic resistivity, and magnetization. While PrOBiS2 was found to be in a monoclinic phase with one-dimensional Bi-S zigzag chains showing no superconductive transition above 0.1 K, CeOBiS2 was in a tetragonal phase with two-dimensional Bi-S planes showing zero resistivity below 1.3 K. In the range x = 0.3-0.9 in Ce1- xPr xOBiS2, both monoclinic and tetragonal phases were formed together with zero resistivity up to a maximum temperature of 2.2 K. A Ce0.5Pr0.5OBiS2 single crystal, which showed both zero resistivity and a decrease in magnetization at ∼2.4 K, presented a tetragonal structure. Short Bi-S bonding in flat two-dimensional Bi-S planes and mixed Ce3+/Ce4+ were characteristic features of the Ce0.5Pr0.5OBiS2 single crystal, which presumably triggered its superconductivity.

Hydrothermal Synthesis, Structure, and Superconductivity of Simple Cubic Perovskite (Ba0.62K0.38)(Bi0.92Mg0.08)O3 with Tc ∼ 30 K.

We have synthesized a new superconducting perovskite bismuth oxide by a facile hydrothermal route at 220 °C. The choice of starting materials, their mixing ratios, and the hydrothermal reaction temperature was crucial for obtaining products with superior superconducting properties. The structure of the powder sample was investigated using laboratory X-ray diffraction, high-resolution synchrotron X-ray diffraction (SXRD) data, and electron diffraction (ED) patterns [transmission electron microscopy (TEM) analysis]. The refinement of SXRD data confirmed a simple perovskite-type structure with a cubic cell of a = 4.27864(2) Å [space group Pm3̅m (No. 221)]. Elemental analysis detected magnesium in the final products, and a refinement based on SXRD and inductively coupled plasma data yielded an ideal undistorted simple cubic perovskite-type structure, with the chemical composition (Ba0.62K0.38)(Bi0.92Mg0.08)O3. ED patterns also confirmed the simple cubic perovskite structure; the cube-shaped microstructures and compositional homogeneity on the nanoscale were verified by scanning electron microscopy and TEM analyses, respectively. The fabricated compound exhibited a large shielding volume fraction of about 98% with a maximum Tcmag of ∼30 K, which was supported by the measured bismuth valence as well. Its electrical resistivity dropped at ∼21 K, and zero resistivity was observed below 7 K. The compound underwent thermal decomposition above 400 °C. Finally, the calculated band structure showed a metallic behavior for this hydrothermally synthesized bismuth oxide.

Discovery of the Pt-Based Superconductor LaPt5As.

A novel superconductor, LaPt5As, which exhibits a new crystal structure was discovered by high-pressure synthesis using a Kawai-type apparatus. A superconducting transition temperature was observed at 2.6 K. Depending on the sintering pressure, LaPt5As has superconducting and non-superconducting phases with different crystal structures. A sintering pressure of around 10 GPa is effective to form single-phase superconducting LaPt5As. This material has a very unique crystal structure with an extremely long c lattice parameter of over 60 Å and corner-sharing tetrahedrons composed of network-like Pt layers. Density functional theory calculations have suggested that the superconducting current flows through these Pt layers. Also, this unique layered structure characteristic of LaPt5As is thought to play a key role in the emergence of superconductivity. Furthermore, due to a stacking structure which makes up layers, various structural modifications for the LaPt5As family are conceivable. Since such a high-pressure synthesis using a Kawai-type apparatus is not common in the field of materials science, there is large room for further exploration of unknown phases which are induced by high pressure in various materials.

Adsorption Behavior of Rare Earth Metal Cations in the Interlayer Space of γ-ZrP.

Adsorption competencies of rare earth metal cations in γ-zirconium phosphate were examined by ICP, synchrotron X-ray diffraction (SXRD), and ab initio simulation. The adsorption amounts are around 0.06-0.10 per zirconium phosphate. From the SXRD patterns of the adsorbed samples, the basal spacing estimated by c sin ß increased linearly with an increasing ionic radius of rare earth metal cation, though a and b lattice constants show no change. These SXRD patterns can be classified into four groups that have different super lattices. The four superlattices have multiplicities of x131, x241, and x221 for the xabc axis, and the location of the rare earth metal cation in the original unit cell changes depending on the superlattice cell. In the x131 superlattice, Yb and Er occupied the site near the zirconium phosphate layer, though La and Ce in the x221 superlattice remained in the center position between the phosphate sheet. For the ab initio simulation of γ-ZrP with the typical rare earth metal cations (Tb, Eu, Dy, and La), the results of simulation show a similar tendency of the position estimated by SXRD refinements.

High-Pressure Polymorph of NaBiO3.

A new high-pressure polymorph of NaBiO3 (hereafter ß-NaBiO3) was synthesized under the conditions of 6 GPa and 600 °C. The powder X-ray diffraction pattern of this new phase was indexed with a hexagonal cell of a = 9.968(1) Å and c = 3.2933(4) Å. Crystal structure refinement using synchrotron powder X-ray diffraction data led to RWP = 8.53% and RP = 5.55%, and the crystal structure was closely related with that of Ba2SrY6O12. No photocatalytic activity for phenol decomposition was observed under visible-light irradiation in spite of a good performance for its mother compound, NaBiO3. The optical band-gap energy of ß-NaBiO3 was narrower than that of NaBiO3, which was confirmed with density of states curves simulated by first-principles density functional theory calculation.

Effects of aerobic exercise in early evening on the following nocturnal sleep and its haemodynamic response.

We determined effect of aerobic exercise in early evening on the quality, quantity, and haemodynamic response of subsequent nocturnal sleep in the home. Ten healthy young participants performed two protocols, with/without cycle ergometer exercise (60 min at 50% heart rate reserve) in early evening. Blood pressure (BP) (Holter) and physical activity (accelerometer) were measured from late afternoon of day 1 until noon of next day (day 2). Additionally, at bedtime participants were equipped with a small device worn on the wrist that identified sleep stage. There were no substantial differences in objective indices of sleep between two protocols (total sleep time: 438 ± 76 vs. 457 ± 64 min; P > 0.10). BP during nocturnal sleep tended to be lowered by prior exercise (MAP: 71 ± 5 vs. 68 ± 6 mmHg; P = 0.08). Aerobic exercise in early evening apparently has no acute effect on sleep per se, but seems to have a residual effect on haemodynamics, i.e. prolongation of post-exercise hypotension.

Nitrogen-Rich Manganese Oxynitrides with Enhanced Catalytic Activity in the Oxygen Reduction Reaction.

The catalytic activity of manganese oxynitrides in the oxygen reduction reaction (ORR) was investigated in alkaline solutions to clarify the effect of the incorporated nitrogen atoms on the ORR activity. These oxynitrides, with rock-salt-like structures with different nitrogen contents, were synthesized by reacting MnO, Mn2 O3 , or MnO2 with molten NaNH2 at 240-280 °C. The anion contents and the Mn valence states were determined by combustion analysis, powder X-ray diffraction, and X-ray absorption near-edge structure analysis. An increase in the nitrogen content of rock-salt-based manganese oxynitrides increases the valence of the manganese ions and reinforces the catalytic activity for the ORR in 1 m KOH solution. Nearly single-electron occupancy of the antibonding eg states and highly covalent Mn-N bonding thus enhance the ORR activity of nitrogen-rich manganese oxynitrides.

Study on the Effect of Pt Intercalation into Layered Niobate Perovskite for Photocatalytic Behavior.

A novel photocatalyst consisting of an intercalated perovskite H(1-2x)Pt(x)LaNb2O7 was fabricated by ion exchange. Synchrotron X-ray diffraction and X-ray photoelectron spectroscopy results confirmed that Pt(2+) exists within the interlayer space of the layered perovskite. H(1-2x)Pt(x)LaNb2O7 composed of layered niobate perovskite and intercalated Pt(2+) completely degraded a 20 ppm phenol solution in 3 h under irradiation by Xe light, which exhibits photocatalytic activity superior to those of RbLaNb2O7, Pt-deposited RbLaNb2O7, and HLaNb2O7. From first-principles density functional theory simulation, high photocatalytic activity of H(1-2x)Pt(x)LaNb2O7 is attributed to the emergence of a new O 2p-Pt 5d hybridized band on top of the valence band.

Structural Difference in Superconductive and Nonsuperconductive Bi-S Planes within Bi4O4Bi2S4 Blocks.

The relationship between the structure and superconductivity of Bi4O4S3 powders synthesized by heating under ambient and high pressures was investigated using synchrotron X-ray diffraction, Raman spectroscopy, and transmission electron microscopy (TEM) observation. The Bi4O4S3 powders synthesized under ambient pressure exhibited a strong superconductivity (diamagnetic) signal and zero resistivity below ∼4.5 K, while the Bi4O4S3 powder synthesized by the high-pressure method exhibited a low-intensity signal down to 2 K. Further annealing of the latter Bi4O4S3 powder under ambient pressure led to the development of a strong signal and zero resistivity. The crystal structures of all Bi4O4S3 phases consisted of Bi4O4Bi2S4 blocks including a Bi-S layer and anion(s) sandwiched between Bi4O4Bi2S4 blocks, but minor structural differences were detected. A comparison of the structures of the superconductive and nonsuperconductive Bi4O4S3 samples suggested that the superconductive Bi4O4S3 phases had slightly smaller lattice parameters. The average structures of the superconductive Bi4O4S3 phases were characterized by a slightly shorter and less bent Bi-S plane. Raman spectroscopy detected vibration of the S-O bonds, which can be attributed to sandwiched anion(s) such as SO4(2-). TEM observation showed stacking faults in the superconductive Bi4O4S3 phases, which indicated local fluctuation of the average structures. The observed superconductivity of Bi4O4S3 was discussed based on impurity phases, enhanced hybridization of the px and py orbitals of the Bi-S plane within Bi4O4Bi2S4 blocks, local fluctuation of the average structures, compositional deviation related to suspicious anion(s) sandwiched between Bi4O4Bi2S4 blocks, and the possibility of suppression of the charge-density-wave state by enriched carrier concentrations.