RESUMO
The total capacity of optical submarine cable systems as a global communication infrastructure must be continuously enlarged. Multi-core fibers (MCFs) have been studied as methods to maximize the total cable capacity under electrical power and cable space limitations. In particular, standard cladding MCFs, which are expected to have high productivity and mechanical reliability, are attractive for early deployment in submarine cable systems. In this paper, we demonstrate high-capacity trans-Pacific class transmission using standard cladding uncoupled 4-core fibers, achieving a transmission capacity of 55.94 Tbit/s over 12,040 km. In addition, based on the results of this and our previous coupled MCF transmission experiments, we summarize the characteristics of coupled and uncoupled MCFs applied to optical submarine cable systems.
RESUMO
For weakly coupled mode-division multiplexed (MDM) transmission systems, we design and implement optical coherent receiver prototypes with real-time multiple-input multiple-output (MIMO) digital signal processing to equalize two degenerate linearly polarized modes with dual polarization. Using field programmable gate array circuits, we implement real-value 8 × 2 MIMO adaptive equalization with externally separated phase compensators based on the least mean square algorithm, which enables not only training equalization but also fast carrier-phase tracking. With the optical coherent MIMO receiver prototype, we demonstrate real-time weakly coupled 10 × MDM wavelength-division multiplexed dual-polarization quadrature phase shift keying transmission over 48-km few-mode fibers. This report shows a record number of multiplexed spatial modes, namely, 10 modes with dual polarization, in real-time MDM transmission experiments.
RESUMO
Ultra-dense spatial-division multiplexing (SDM) is achieved by mode multiplexed technique with multiple cores in a single fiber, namely few-mode multi-core fiber. Using a 9.8-km six-mode nineteen-core fiber, we demonstrate an ultra-dense SDM transmission of 16-channels wavelength-division-multiplexed (WDM) dual-polarization quadrature phase shift keying signals, achieving a record spatial multiplicity of 114. With the help of ultra-dense Super-Nyquist WDM techniques in the 4.5-THz bandwidth of the full C-band, we demonstrate 2.05 Pbit/s transmission over 9.8-km six-mode nineteen-core fibers. In this experiment, the highest aggregate spectral efficiency of 456 bit/s/Hz is achieved.
RESUMO
We numerically and experimentally evaluate the performance of higher-order mode conversion based on phase plates for 10-mode fibers (10MFs). The phase plates have the phase jump of π between multiple planes, which match the phase patterns of linearly polarized (LP) modes of 10MF. First, we numerically investigate the effects of the fabrication errors such as the phase-difference error and the slope in the phase jump of the phase plate. The simulation results for the mode conversion to LP11 indicate that such errors make the spatial pattern of the converted beam asymmetric. In order to maintain the symmetric pattern, the phase-difference error is required to be less than ± 2%, and the ratio of the slope width to the input beam waist should be suppressed to be less than 0.05. Next, we calculate the coupling power efficiencies of the excitation of LP modes in 10MF when the converted beams after the phase plate are launched into 10MF using a lens. As the calculation results, highly accurate adjustment of the input beam waist is required to suppress the crosstalk due to coupling of undesirable LP modes by less than -20 dB. For mode excitation of LP11 or LP12, crosstalk of more than -20 dB is not avoidable even if the input beam waist is carefully adjusted. In contrast, the crosstalk for the mode excitation of LP21 or LP31 is easily suppressed to be less than -20 dB without careful adjustment of the input beam waist. These results suggest that phase plates are not applicable to mode conversion to LP11 and LP12 in 10MF while they are suitable for conversion to LP02, LP21 and LP31. Finally, we experimentally demonstrate conversion from LP01 to LP21 and LP31 modes in 10MF using phase plates. We obtain nearly ideal LP21 and LP31 modes with the small crosstalk due to the coupling of the other undesirable LP modes.
RESUMO
Space-division multiplexing with uncoupled multi-core fiber is a promising technology to drastically increase a fiber capacity in optical communication systems. Trans-oceanic class ultra-long-haul transmission was successfully achieved by using 7-core MCF with suppressed inter-core crosstalk. By using a combination of MCF and spectral efficient modulation format, the fiber capacity could be increased from 28.8 Tbit/s to 140 Tbit/s and a capacity-distance product exceeding 1 Exabit/s·km was obtained in 7 cores x 201 λ x 100 Gbit/s transmission over 7326 km. These results indicate that the MCF transmission will be one of promising candidates for future ultra-high capacity optical communication systems.
Assuntos
Artefatos , Redes de Comunicação de Computadores/instrumentação , Fibras Ópticas , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Oceanos e MaresRESUMO
Optical Orthogonal Frequency Division Multiplexing (O-OFDM), which transmits high speed optical signals using multiple spectrally overlapped lower-speed subcarriers, is a promising candidate for supporting future elastic optical networks. In contrast to previous works which focus on Coherent Optical OFDM (CO-OFDM), in this paper, we consider the direct-detection optical OFDM (DDO-OFDM) as the transport technique, which leads to simpler hardware and software realizations, potentially offering a low-cost solution for elastic optical networks, especially in metro networks, and short or medium distance core networks. Based on this network scenario, we design and deploy a software-defined networking (SDN) control plane enabled by extending OpenFlow, detailing the network architecture, the routing and spectrum assignment algorithm, OpenFlow protocol extensions and the experimental validation. To the best of our knowledge, it is the first time that an OpenFlow-based control plane is reported and its performance is quantitatively measured in an elastic optical network with DDO-OFDM transmission.
Assuntos
Algoritmos , Redes de Comunicação de Computadores/instrumentação , Dispositivos Ópticos , Processamento de Sinais Assistido por Computador/instrumentação , Software , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
We show super-Nyquist-WDM transmission technique, where optical signals with duobinary-pulse shaping can be wavelength-multiplexed with frequency spacing of below baudrate. Duobinary-pulse shaping can reduce the signal bandwidth to be a half of baudrate while controlling inter-symbol interference can be compensated by the maximum likelihood sequence estimation in a receiver. First, we experimentally evaluate crosstalk characteristics as a function of channel spacing between the dual-channel DP-QPSK signals with duobinary-pulse shaping. As a result, the crosstalk penalty can be almost negligible as far as the ratio of baudrate to frequency spacing is maintained to be less than 1.20. Next, we demonstrate 140.7-Tbit/s, 7,326-km transmission of 7 × 201-channel 25-GHz-spaced super-Nyquist-WDM 100-Gbit/s optical signals using seven-core fiber and full C-band seven-core EDFAs. To the best of our knowledge, this is one of the first reports of high-capacity transmission experiments with capacity-distance product in excess of 1 Exabit/s · km.
RESUMO
In this paper, we verify the effectiveness of the last-stage long memory filter (LMF) in mitigating the long-memory response (LMR) of hardware, i.e. the transmitter and receiver. Based on the experimental results, we draw the following conclusions: 1) LMF can effectively mitigate the LMR impact, such as transmitter reflections, and its efficiency is more significant for high-order QAM signals. 2) Using LMF, a partially-correlated pattern exhibits similar performance to that of an uncorrelated pattern both in back-to-back and after 320-km standard single mode fiber (SSMF) transmission. Moreover, a simple solution to the computational complexity of LMF, effective-tap (ET) LMF, is proposed and demonstrated.
Assuntos
Amplificadores Eletrônicos , Filtração/instrumentação , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
For polarization-division-multiplexing coherent optical orthogonal frequency division multiplexing (PDM-CO-OFDM) systems, we propose a per-symbol-based digital back-propagation (DBP) approach which, after cyclic prefix removal, conducts DBP for each OFDM symbol. Compared with previous DBP, this new proposal avoids the use of inefficient overlap-and-add operation and saves one fast Fourier transform (FFT) module, therefore simplifying the hardware implementation. Transmitting a 16-QAM, 42.8-Gb/s PDM-CO-OFDM signal over 960-km standard single mode fiber (SSMF), we compare the previous and the proposed DBP approaches with different receiver's sampling rates and different step lengths in each DBP iteration, and found that the proposed DBP can achieve a similar performance as that of the previous DBP while enjoying a simpler implementation. We have also specifically introduced a small self-phase modulation (SPM) model for DBP and demonstrated its feasibility with the same experimental setup.
Assuntos
Algoritmos , Redes de Comunicação de Computadores/instrumentação , Tecnologia de Fibra Óptica/instrumentação , Armazenamento e Recuperação da Informação/métodos , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
To mitigate the potential scalability issues of an OpenFlow-based control plane, a seamless OpenFlow and Path Computation Element (PCE) integrated control plane is proposed, by means of an architecture in which the path computation function is formally decoupled from the controller so the controller can off-load the task to one or more dedicated PCEs using an open and standard interface and protocol, and where the PCE obtains its topology database by means of a dedicated dynamic topology server, which is accessed by the PCE on a per-request basis. The overall feasibility and performance metrics of this integrated control plane are experimentally verified and quantitatively evaluated on a real IP over translucent Wavelength Switched Optical Network (WSON) testbed.
Assuntos
Redes de Comunicação de Computadores/instrumentação , Dispositivos Ópticos , Processamento de Sinais Assistido por Computador/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
A control plane is a key enabling technique for dynamic and intelligent end-to-end path provisioning in optical networks. In this paper, we present an OpenFlow-based control plane for spectrum sliced elastic optical path networks, called OpenSlice, for dynamic end-to-end path provisioning and IP traffic offloading. Experimental demonstration and numerical evaluation show its overall feasibility and efficiency.
Assuntos
Redes de Comunicação de Computadores/instrumentação , Dispositivos Ópticos , Processamento de Sinais Assistido por Computador/instrumentação , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
We confirm the feasibility of 100-Tbit/s-class trans-oceanic SDM transmission. Using seven-core fiber spans with seven-core full C-band EDFAs, 7 × 264-channel quasi-Nyquist-WDM 60-Gbit/s PDM-QPSK signals are transmitted over 6,370 km.
Assuntos
Tecnologia de Fibra Óptica/instrumentação , Dispositivos Ópticos , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Estudos de ViabilidadeRESUMO
We propose a new 16QAM optical transmitter based on a combination of a dual-drive Mach-Zehnder modulator (DD-MZM) and a dual-parallel Mach-Zehnder modulator (DP-MZM) with electrical binary drive signals. For 16QAM generation, two arms of DD-MZM are independently driven by two different binary data, and consequently, the DD-MZM produces an offset square 4QAM of the 16QAM constellation. This 4QAM signal is then switched over other quadrants through a typical QPSK modulation scheme by the following DP-MZM, and resulting in 16QAM. By using the proposed transmitter together with a digital coherent receiver, we successfully demonstrate the 224-Gb/s and 320-Gb/s PDM-RZ-16QAM systems. Their OSNR sensitivities at 3.8x10(-3) BER are observed to be 19.8 dB and 23 dB, respectively.
Assuntos
Interferometria/instrumentação , Dispositivos Ópticos , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
We propose a new optical transmitter which is capable of changing flexibly the modulation format of the optical signal. By using this transmitter, we can handle and assign various modulation formats: binary phase shift keying (BPSK), quadrature phase shift keying (QPSK), 8-ary quadrature amplitude modulation (8QAM), and 16QAM. The proposed transmitter is based on a combination of a dual-drive Mach-Zehnder modulator (DD-MZM) and a dual-parallel MZM (DP-MZM) with electrical binary drive signals. DD-MZM is a key element to produce the 8QAM and 16QAM formats where each arm of DD-MZM is driven by independent binary data. This is because we can modulate the amplitude and phase of the optical signal by using a frequency chirp of the modulator when we adjust properly the amplitudes of the electrical drive signals. In addition, we show an algorithm by which the proposed transmitter can intelligently select the modulation format in accordance with the signal quality.
Assuntos
Algoritmos , Redes de Comunicação de Computadores/instrumentação , Dispositivos Ópticos , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
We present new generation and detection methods for high symbol-rate 64-ary quadrature amplitude modulation (64QAM). The 64QAM signal is created by tandem in-phase/quadrature (I/Q) modulators driven by electrical binary signals. The first I/Q modulator, which has four drive arms (i.e. a dual-drive I/Q modulator), yields 16QAM with an offset at the 1st quadrant of the complex plane. Subsequently, the second modulator switches this 16QAM signal over four quadrants via the typical quadrature phase-shift-keying (QPSK) modulation scheme, hence the desired 64QAM is generated. To mitigate the impacts of transmitter imperfections, we also propose a phase-folded decision-directed (PF-DD) linear equalizer at the receiver. Using these new techniques, we experimentally demonstrate the 120- and 240-Gb/s polarization-division-multiplexed (PDM) return-to-zero (RZ) 64QAM systems. The required optical signal-to-noise ratio (OSNR) for a bit-error rate (BER) of 2.4x10(-2) is measured at 20.2 or 23 dB, respectively, which is ~3.5 dB off the theoretical limit.
Assuntos
Tecnologia de Fibra Óptica/instrumentação , Tecnologia de Fibra Óptica/métodos , Modelos Teóricos , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Desenho Assistido por ComputadorRESUMO
This paper presents and experimentally evaluates efficient strategies for dynamic source/Path Computation Element (PCE) routing with aggregated resource information and advanced distributed spectrum allocation algorithms in Generalized Multi-Protocol Label Switching (GMPLS)-controlled elastic optical networks.
Assuntos
Algoritmos , Redes de Comunicação de Computadores , Tecnologia de Fibra Óptica/métodos , Armazenamento e Recuperação da Informação/métodos , Processamento de Sinais Assistido por Computador , Luz , Espalhamento de RadiaçãoRESUMO
OpenFlow, as an open-source protocol for network virtualization, is also widely regarded as a promising control plane technique for heterogeneous networks. But the utilization of the OpenFlow protocol to control a wavelength switched optical network has not been investigated. In this paper, for the first time, we experimentally present a proof-of-concept demonstration of OpenFlow-based wavelength path control for lightpath provisioning in transparent optical networks. We propose two different approaches (sequential and delayed approaches) for lightpath setup and two different approaches (active and passive approaches) for lightpath release by using the OpenFlow protocol. The overall feasibility of these approaches is experimentally validated and the network performances are quantitatively evaluated. More importantly, all the proposed methodologies are demonstrated and evaluated on a real transparent optical network testbed with both OpenFlow-based control plane and data plane, which allows their feasibility and effectiveness to be verified, and valuable insights of the proposed solutions to be obtained for deploying into real OpenFlow controlled optical networks.
Assuntos
Redes de Comunicação de Computadores/instrumentação , Desenho Assistido por Computador , Modelos Teóricos , Dispositivos Ópticos , Simulação por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Espalhamento de RadiaçãoRESUMO
We present a lab-trial of the designed and implemented path computation architecture for multi-domain translucent wavelength switched optical networks (WSON), using hierarchical Path Computation Elements (H-PCE). The approach is based on the dynamic aggregation of the domain topologies, represented as a virtual link meshes at a higher level, in order to perform dynamic domain sequence selection. We detail the extended path computation procedures, involving both domain selections considering inter domain links and segment expansions which are impairment-aware, along with the proposed control plane protocol extensions. We validate the approach with the overall performance of the end to end path computation latency, highlighting the benefits of parallelization.
RESUMO
Dynamic lightpath restoration is a key issue in wavelength switched optical networks (WSON). On the other hand, the introduction of the path computation element (PCE) and the generalized multi-protocol label switching (GMPLS) architectures into WSON as control plane technologies is expected to bring more intelligence and to enable the dynamic computation and control of end-to-end lightpaths in a cost-efficient manner. In this paper, for the first time and through a lab trial with four domains and a field trial located in Japan and Spain, we experimentally present PCE-based optical signal to noise ratio (OSNR)-aware dynamic restoration in multi-domain GMPLS-enabled translucent WSON, assessing the overall feasibility of the proposed techniques and quantitatively evaluating the service disruption time and path computation latency during end-to-end lightpath restoration.
Assuntos
Dispositivos Ópticos , Processamento de Sinais Assistido por Computador/instrumentação , Telecomunicações/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Estudos de ViabilidadeRESUMO
Our Terabit LAN initiatives attempt to enhance the scalability and utilization of lambda resources. This paper describes bandwidth-on-demand virtualized 100GE access to WDM networks on a field fiber test-bed using multi-domain optical-path provisioning.