Nanoarchitectonics of MXene Derived TiO2 /Graphene with Vertical Alignment for Achieving the Enhanced Supercapacitor Performance.

Structural engineering and hybridization of heterogeneous 2D materials can be effective for advanced supercapacitor. Furthermore, architectural design of electrodes particularly with vertical construction of structurally anisotropic graphene nanosheets, can significantly enhance the electrochemical performance. Herein, MXene-derived TiO2 nanocomposites hybridized with vertical graphene is synthesized via CO2 laser irradiation on MXene/graphene oxide nanocomposite film. Instantaneous photon energy by laser irradiation enables the formation of vertical graphene structures on nanocomposite films, presenting the controlled anisotropy in free-standing film. This vertical structure enables improved supercapacitor performance by forming an open structure, increasing the electrolyte-electrode interface, and creating efficient electron transport path. In addition, the effective oxidation of MXene nanosheets by instantaneous photon energy leads to the formation of rutile TiO2 . TiO2 nanoparticles directly generated on graphene enables the effective current path, which compensates for the low conductivity of TiO2 and enables the functioning of an effective supercapacitor by utilizing its pseudocapacitive properties. The resulting film exhibits excellent specific areal capacitance of 662.9 mF cm-2 at a current density of 5 mA cm-2 . The film also shows superb cyclic stability during 40 000 repeating cycles, maintaining high capacitance. Also, the pseudocapacitive redox reaction kinetics is evaluated, showing fast redox kinetics with potential for high-performance supercapacitor applications.

Highly Selective and Reversible Detection of Simulated Breath Hydrogen Sulfide Using Fe-Doped CuO Hollow Spheres: Enhanced Surface Redox Reaction by Multi-Valent Catalysts.

The precise and reversible detection of hydrogen sulfide (H2 S) at high humidity condition, a malodorous and harmful volatile sulfur compound, is essential for the self-assessment of oral diseases, halitosis, and asthma. However, the selective and reversible detection of trace concentrations of H2 S (≈0.1 ppm) in high humidity conditions (exhaled breath) is challenging because of irreversible H2 S adsorption/desorption at the surface of chemiresistors. The study reports the synthesis of Fe-doped CuO hollow spheres as H2 S gas-sensing materials via spray pyrolysis. 4 at.% of Fe-doped CuO hollow spheres exhibit high selectivity (response ratio ≥ 34.4) over interference gas (ethanol, 1 ppm) and reversible sensing characteristics (100% recovery) to 0.1 ppm of H2 S under high humidity (relative humidity 80%) at 175 °C. The effect of multi-valent transition metal ion doping into CuO on sensor reversibility is confirmed through the enhancement of recovery kinetics by doping 4 at.% of Ti- or Nb ions into CuO sensors. Mechanistic details of these excellent H2 S sensing characteristics are also investigated by analyzing the redox reactions and the catalytic activity change of the Fe-doped CuO sensing materials. The selective and reversible detection of H2 S using the Fe-doped CuO sensor suggested in this work opens a new possibility for halitosis self-monitoring.

Wafer-Scale Atomic Assembly for 2D Multinary Transition Metal Dichalcogenides for Visible and NIR Photodetection.

The tunable properties of 2D transition-metal dichalcogenide (TMDs) materials are extensively investigated for high-performance and wavelength-tunable optoelectronic applications. However, the precise modification of large-scale systems for practical optoelectronic applications remains a challenge. In this study, a wafer-scale atomic assembly process to produce 2D multinary (binary, ternary, and quaternary) TMDs for broadband photodetection is demonstrated. The large-area growth of homogeneous MoS2, Ni0.06Mo0.26S0.68, and Ni0.1Mo0.9S1.79Se0.21 is carried out using a succinct coating of the single-source precursor and subsequent thermal decomposition combined with thermal evaporation of the chalcogen powder. The optoelectrical properties of the multinary TMDs are dependent on the combination of heteroatoms. The maximum photoresponsivity of the MoS2-, Ni0.06Mo0.26S0.68-, and Ni0.1Mo0.9S1.79Se0.21-based photodetectors is 3.51 × 10-4, 1.48, and 0.9 A W-1 for 532 nm and 0.063, 0.42, and 1.4 A W-1 for 1064 nm, respectively. The devices exhibited excellent photoelectrical properties, which is highly beneficial for visible and near-infrared (NIR) photodetection.

Dual Catalytic and Self-Assembled Growth of Two-Dimensional Transition Metal Dichalcogenides Through Simultaneous Predeposition Process.

The recent introduction of alkali metal halide catalysts for chemical vapor deposition (CVD) of transition metal dichalcogenides (TMDs) has enabled remarkable two-dimensional (2D) growth. However, the process development and growth mechanism require further exploration to enhance the effects of salts and understand the principles. Herein, simultaneous predeposition of a metal source (MoO3 ) and salt (NaCl) by thermal evaporation is adopted. As a result, remarkable growth behaviors such as promoted 2D growth, easy patterning, and potential diversity of target materials can be achieved. Step-by-step spectroscopy combined with morphological analyses reveals a reaction path for MoS2 growth in which NaCl reacts separately with S and MoO3 to form Na2 SO4 and Na2 Mo2 O7 intermediates, respectively. These intermediates provide a favorable environment for 2D growth, including an enhanced source supply and liquid medium. Consequently, large grains of monolayer MoS2 are formed by self-assembly, indicating the merging of small equilateral triangular grains on the liquid intermediates. This study is expected to serve as an ideal reference for understanding the principles of salt catalysis and evolution of CVD in the preparation of 2D TMDs.

Strategic Customization of Polymeric Nanocomposites Modified by 2D Titanium Oxide Nanosheet for High-k and Flexible Gate Dielectrics.

Organic polymer-based dielectrics with intrinsic mechanical flexibility and good processability are excellent candidates for the dielectric layer of flexible electronics. These polymer films can become even more rigid and electrically robust when modified through cross-linking processes. Moreover, the composites formed by dispersing nanoscale inorganic fillers in a polymer matrix can exhibit further improved polarization property. However, these strategies can be challenging as homogeneous dispersion of nanomaterials in the matrix is difficult to achieve; thus, degradation of electrically insulating properties of nanocomposite layers is often observed. Here, a high-k, pinhole-free, and flexible poly(vinyl alcohol) (PVA)-based nanocomposite dielectric is presented, incorporating 2D TiO2 nanosheets (NSs) for the first time. Despite the attractive dielectric constant, exceptional flexibility, and electrically insulating property of PVA-TiO2 nanocomposites, only few studies on these materials have been reported. The organic/inorganic nanosheet hybrid layer, which reaches an unprecedentedly high dielectric constant of 43.8 (more than four times higher than that of cross-linked PVA), also exhibits an outstanding leakage current density as low as 10-9 A cm-2 . Furthermore, the repeated bending tests for nanocomposite capacitors reveal their capability of operating without any deterioration of their performances even after 1000 iterations of bending cycles at a bending radius of 3 mm.

Development of water quality criteria for arsenic to protect aquatic life based on species sensitivity distribution.

Arsenic is a hazardous environmental pollutant widely distributed globally. Arsenic toxicity is well known and it is regulated by many countries in terms of managing water quality and protecting aquatic organisms. Unfortunately, water quality criterion (WQC) to protect aquatic organisms has not been introduced in Korea yet. Thus, it is of great importance and necessity to introduce WQC to protect aquatic organisms from arsenic, as WQC play a significant role in protecting aquatic ecosystems from pollutants. Therefore, the purpose of this study is to derive arsenic water quality criterion for aquatic life in Korea. Arsenic acute toxicity tests were performed with 10 Korean native aquatic species, which belong to 7 different taxonomic groups. Based on the results of acute toxicity test and additional toxicity data from literature, the species sensitivity distribution (SSD) method was used in ecological risk assessment. The arsenic concentration of 95% protection level for aquatic life was 0.229 mg L-1 in this study. An assessment factor 3 and a background concentration 0.0004 mg L-1 were applied to the concentration value in consideration of the uncertainty of the data and the amount of arsenic natural generation. Consequently, the WQC value derived for arsenic was found to be 0.077 mg L-1. These results will serve as reference values to establish water quality criterion for the protection of aquatic life in Korea.

Monocyte counts are negatively associated with ankle-brachial index values in non-dialysis-dependent chronic kidney disease patients.

Our aim was to determine which leukocyte subtypes are most relevant to ankle-brachial index (ABI) values in patients with non-dialysis-dependent chronic kidney disease (NDD-CKD). The study included 79 NDD-CKD patients aged 62.84 ± 12.09 years (63.33% men; 26.67% patients with diabetes) and 21 age-matched normal controls. According to the estimated glomerular filtration rate (eGFR) calculated by the CKD-Epidemiology Collaboration equation (CKD-EPI), we classified the study population into 2 groups (21 subjects with NDD-CKD with an eGFR 60-89 mL/min/1.73m2, 58 subjects with NDD-CKD with eGFR <60 mL/min/1.73 m2). ABI was calculated as the ratio of the ankle systolic BP divided by the arm systolic BP using an ABI-form device. An automated hematologic analyzer was used to measure total and differential leukocyte counts. Monocyte counts and monocyte-to-total leukocyte count ratios (MTR) in patients with an ABI value <1.10 were significantly higher than those in patients with an ABI value ≥1.10, respectively. Univariate analyses revealed that mean ABI values were negatively correlated with monocyte count (r= -0.341; p = 0.044), MTR (r= -0.346, p = 0.031). Multivariate linear regression analyses showed that monocyte count was negatively associated with ABI values (ß ± SE = -1.825 ± 0.341, p = 0.013). The area under the curve of monocyte counts was 0.695 (95% confidence interval 0.586-0.804, p = 0.002) in predicting an ABI value <1.10. Monocyte counts are negatively associated with ABI values in patients with NDD-CKD without apparent peripheral arterial occlusive disorder (PAOD).

Attachable piezoelectric nanogenerators using collision-induced strain of vertically grown hollow MoS2 nanoflakes.

Piezoelectric materials convert external mechanical force into electrical energy, due to the breaking of the centrosymmetry of the atomic structure. Piezoelectricity-based nano-generators (PNGs) based on two-dimensional transition metal dichalcogenides (TMDs) can generate electrical energy stably by the piezoelectric effect at their nanoscale thickness. However, the commercialization of TMD-based PNGs is limited by their poor piezoelectric performance and microscale energy harvesting. Here, we present the first centimeter-scale PNGs based on molybdenum disulfide (MoS2) nanosheets with vertically grown hollow MoS2 nanoflakes (v-MoS2 NFs) obtained by chemical vapor deposition for energy harvesting from human motions. The collision of v-MoS2 NFs with a preferred odd-atomic-layer number and their 2H antiparallel phase leads to efficient electrical energy generation during the bending movement. Further, basal MoS2 films with v-MoS2 NFs are transferred onto flexible substrates via conventional polymer-assisted methods for the fabrication of attachable and wearable piezoelectric power generators.

Tunable functionalization of graphene nanosheets for graphene-organic hybrid photodetectors.

Graphene-organic hybrid thin films are promising candidates for use as advanced transparent electrodes and high-performance photodetectors. In this work, we fabricated hybrid thin film structures consisting of graphene and either tetraphenyl-porphyrin (H2TPP) or metalloporphyrins such as aluminum (III) tetraphenyl-porphyrin (Al(III)TPP) and zinc tetraphenyl-porphyrin (ZnTPP). The optical and electrical characteristics of ultrathin photodetectors based on the graphene-organic hybrid layers were subsequently evaluated. A hybrid deposition system capable of both thermal evaporation and vapor phase metalation was employed to synthesize the tunable metalloporphyrin-based thin films. As a proof of concept, we successfully fabricated various graphene-based photodetectors via the simple and efficient vapor-phase metalation of porphyrin. This work may facilitate the development of new architectures for flexible graphene-organic devices.

Cell Proliferation on Macro/Nano Surface Structure and Collagen Immobilization of 3D Polycaprolactone Scaffolds.

In this study, 3D polycaprolactone (PCL) scaffolds were fabricated by 3D printing technique. The macro/nano morphology of, 3D PCL scaffolds surface was etched with oxygen plasma. Acrylic acid (AA) plasma-polymerization was performed to functionalize the macro/nano surface with carboxyl groups and then collagen was immobilized with plasma-polymerized 3D PCL scaffolds. After O2 plasma and AA plasma-polymerization, contact angles were decreased. The FE-SEM and AFM results showed that O2 plasma is increased the surface roughness. The MTT assay results showed that proliferation of the M3CT3-E1 cells increased on the oxygen plasma treated and collagen immobilized 3D PCL scaffolds.

O2/Ar Plasma Treatment for Enhancing the Biocompatibility of Hydroxyapatite Nanopowder and Polycaprolactone Composite Film.

In this study we performed O2/Ar plasma treatment to remove the polycaprolactone on hydroxyapatite nanopowder and polycaprolactone (HAp-NP/PCL) composite film. After plasma ashing, the HAp-NP was exposed on the composite film. The 25 wt% HAp-NP/PCL treated with plasma showed the hydrophilic surface property with reducing the aging effect. The MTT and ALP results indicated that the plasma etching increased the biocompatibility of HAp-NP/PCL composite film. The present simple plasma etching technique can be applicable in a development of biomaterials.

Oxygen and Nitrogen Gas Plasma Surface Treatments on Titanium for Initial Adhesion and Proliferation of Preosteoblast Cells.

In this study, titanium (Ti) surface was treated through the use of oxygen and nitrogen plasma for improving the initial adhesion and proliferation of preosteoblast cells. The plasma treated Ti surface demonstrated hydrophilic surface property and promoted initial adhesion and proliferation of preosteoblast cells.

Fabrication of 3D Scaffolds with Nano-Hydroxyapatite for Improving the Preosteoblast Cell-Biological Performance.

Three-dimensional (3D) scaffolds fabricated by rapid prototyping techniques have many merits for tissue engineering applications, due to its controllable properties such as porosity, pore size and structural shape. Nonetheless, low cell seeding efficiency remains drawback. In this study, poly-caprolactone (PCL) composite 3D extruded scaffolds were modified with nano hydroxyapatite (n-HAp). PCL/n-HAp 3D scaffold surface was treated with oxygen plasma to improve the preosteoblast cell seeding efficiency and proliferation. The results indicate that oxygen plasma is useful technique to improve the cell affinity.

In Vitro Antibacterial Activity of Nano Silver Ion Substituted Poly Acrylic Acid Films on Titanium by Plasma Polymerization.

Antibacterial activity of oral pathogens such as Streptococcus mutans, Streptococcus sobrinus when silver ion immobilized on commercially pure (CP) titanium (Ti) surface was investigated in this study. Plasma-polymerized acrylic acid to have carboxyl group was deposited on CP-Ti surface and then ion-exchanged with Ag+ ions in 0.1 N AgNO3. In anti-adherent experiment, antibacterial activity was tested using broth culture methods. The biofilm formation assay was performed using semi-defined biofilm medium with sucrose. The silver coated CP-Ti completely inhibited the growth of S. mutans and S. sobrinus. In addition, the biofilm formation was significantly inhibited in silver-coated CP-Ti group.

Effect of extremely low frequency magnetic fields on cell proliferation and gene expression.

Owing to concerns regarding possible effects of extremely low frequency magnetic fields (ELF-MF) on human health, many studies have been conducted to elucidate whether ELF-MF can induce modifications in biological processes. Despite this, controversies regarding effects of ELF-MF are still rife. In this study, we investigated biological effects of ELF-MF on MCF10A, MCF7, Jurkat, and NIH3T3 cell lines. ELF-MF with a magnetic flux density of 1 mT at 60 Hz was employed to stimulate cells for 4 or 16 h, after which the effects of ELF-MF on cell proliferation, cell death, cell viability, and DNA synthesis rates were assessed. Whereas Jurkat and NIH3T3 cells showed no consistent variation in cell number, cell viability, and DNA synthesis rate, MCF10A and MCF7 cells showed consistent and significant decreases in cell number, cell viability, and DNA synthesis rates. However, there was no effect of ELF-MF on cell death in any of tested cell lines. Next, to investigate the effect of ELF-MF on gene expression, we exposed MCF7 cells to 2 mT at 60 Hz for 16 h and examined transcriptional responses by using gene expression array. We found a gene, PMAIP1, that exhibited statistically significant variation using two-fold cut-off criteria and certified its expression change by using semi-quantitative and quantitative reverse transcription polymerase chain reaction. From these results, we concluded that ELF-MF could induce the delay of cell cycle progression in MCF7 and MCF10A cells in a cell context-specific manner and could up-regulate PMAIP1 in MCF7 cells.

Effects on g2/m phase cell cycle distribution and aneuploidy formation of exposure to a 60 Hz electromagnetic field in combination with ionizing radiation or hydrogen peroxide in l132 nontumorigenic human lung epithelial cells.

The aim of the present study was to assess whether exposure to the combination of an extremely low frequency magnetic field (ELF-MF; 60 Hz, 1 mT or 2 mT) with a stress factor, such as ionizing radiation (IR) or H2O2, results in genomic instability in non-tumorigenic human lung epithelial L132 cells. To this end, the percentages of G2/M-arrested cells and aneuploid cells were examined. Exposure to 0.5 Gy IR or 0.05 mM H2O2 for 9 h resulted in the highest levels of aneuploidy; however, no cells were observed in the subG1 phase, which indicated the absence of apoptotic cell death. Exposure to an ELF-MF alone (1 mT or 2 mT) did not affect the percentages of G2/M-arrested cells, aneuploid cells, or the populations of cells in the subG1 phase. Moreover, when cells were exposed to a 1 mT or 2 mT ELF-MF in combination with IR (0.5 Gy) or H2O2 (0.05 mM), the ELF-MF did not further increase the percentages of G2/M-arrested cells or aneuploid cells. These results suggest that ELF-MFs alone do not induce either G2/M arrest or aneuploidy, even when administered in combination with different stressors.

Fabrication of graphene-based flexible devices utilizing a soft lithographic patterning method.

There has been considerable interest in soft lithographic patterning processing of large scale graphene sheets due to the low cost and simplicity of the patterning process along with the exceptional electrical or physical properties of graphene. These properties include an extremely high carrier mobility and excellent mechanical strength. Recently, a study has reported that single layer graphene grown via chemical vapor deposition (CVD) was patterned and transferred to a target surface by controlling the surface energy of the polydimethylsiloxane (PDMS) stamp. However, applications are limited because of the challenge of CVD-graphene functionalization for devices such as chemical or bio-sensors. In addition, graphene-based layers patterned with a micron scale width on the surface of biocompatible silk fibroin thin films, which are not suitable for conventional CMOS processes such as the patterning or etching of substrates, have yet to be reported. Herein, we developed a soft lithographic patterning process via surface energy modification for advanced graphene-based flexible devices such as transistors or chemical sensors. Using this approach, the surface of a relief-patterned elastomeric stamp was functionalized with hydrophilic dimethylsulfoxide molecules to enhance the surface energy of the stamp and to remove the graphene-based layer from the initial substrate and transfer it to a target surface. As a proof of concept using this soft lithographic patterning technique, we demonstrated a simple and efficient chemical sensor consisting of reduced graphene oxide and a metallic nanoparticle composite. A flexible graphene-based device on a biocompatible silk fibroin substrate, which is attachable to an arbitrary target surface, was also successfully fabricated. Briefly, a soft lithographic patterning process via surface energy modification was developed for advanced graphene-based flexible devices such as transistors or chemical sensors and attachable devices on a biocompatible silk fibroin substrate. Significantly, this soft lithographic patterning technique enables us to demonstrate a simple and efficient chemical sensor based on reduced graphene oxide (rGO), a metallic nanoparticle composite, and an attachable graphene-based device on a silk fibroin thin film.

Absence of DNA damage after 60-Hz electromagnetic field exposure combined with ionizing radiation, hydrogen peroxide, or c-Myc overexpression.

The principal objective of this study was to assess the DNA damage in a normal cell line system after exposure to 60 Hz of extremely low frequency magnetic field (ELF-MF) and particularly in combination with various external factors, via comet assays. NIH3T3 mouse fibroblast cells, WI-38 human lung fibroblast cells, L132 human lung epithelial cells, and MCF10A human mammary gland epithelial cells were exposed for 4 or 16 h to a 60-Hz, 1 mT uniform magnetic field in the presence or absence of ionizing radiation (IR, 1 Gy), H(2)O(2) (50 µM), or c-Myc oncogenic activation. The results obtained showed no significant differences between the cells exposed to ELF-MF alone and the unexposed cells. Moreover, no synergistic or additive effects were observed after 4 or 16 h of pre-exposure to 1 mT ELF-MF or simultaneous exposure to ELF-MF combined with IR, H(2)O(2), or c-Myc activation.

Highly conductive, conformable ionic laser-induced graphene electrodes for flexible iontronic devices.

Iontronic devices, recognized for user-friendly soft electronics, establish an electrical double layer (EDL) at the interface between ion gels and electrodes, significantly influencing device performance. Despite extensive research on ion gels and diverse electrode materials, achieving a stable interfacial formation remains a persistent challenge. In this work, we report a solution to address this challenge by employing CO2 irradiation as a bottom-up methodology to directly fabricate highly conductive, conformable laser-induced graphene (LIG) electrodes on a polyimide (PI)-based ion gel. The PI ion gel exhibits exceptional EDL formation at the electrode interface, primarily attributable to efficient ion migration. Particularly, ionic laser-induced graphene (i-LIG) electrodes, derived from the PI ion gel as a precursor, yield high-quality graphene with enhanced crystallinity and an expanded porous structure in the upward direction. This outcome is achieved through a pronounced thermal transfer effect and intercalation phenomenon between graphene layers, facilitated by the presence of ionic liquids (ILs) within the PI ion gel. Ultimately, in comparison to alternative soft electrode-based vertical capacitors, the utilization of i-LIGs and PI ion gels in the vertical capacitor demonstrates reduced interfacial resistance and increased EDL capacitance, emphasizing the extensive potential of iontronic devices. These results not only highlight these features but also introduce a new perspective for advancing next-generation iontronic devices.

Multiarray Gas Sensors Using Ternary Combined Ti3C2Tx MXene-Based Nanocomposites.

This paper reports chemiresistive multiarray gas sensors through the synthesized ternary nanocomposites, using a one-pot method to integrate two-dimensional MXene (Ti3C2Tx) with Ti-doped WO3 (Ti-WO3/Ti3C2Tx) and Ti3C2Tx with Pd-doped SnO2 (Pd-SnO2/Ti3C2Tx). The gas sensors based on Ti-WO3/Ti3C2Tx and Pd-SnO2/Ti3C2Tx exhibit exceptional sensitivity, particularly in detecting 70% at 1 ppm acetone and 91.1% at 1 ppm of H2S. Notably, our sensors demonstrate a remarkable sensing performance in the low-ppb range for acetone and H2S. Specifically, the Ti-WO3/Ti3C2Tx sensor demonstrates a detection limit of 0.035 ppb for acetone, and the Pd-SnO2/Ti3C2Tx sensor shows 0.116 ppb for H2S. Simultaneous measurements with Ti-WO3/Ti3C2Tx- and Pd-SnO2/Ti3C2Tx-based sensors enable the evaluation of both the concentration and type of unknown target gases, such as acetone or H2S. Furthermore, density functional theory calculations are performed to clarify the role of Ti and Pd doping in enhancing the performance of Ti-WO3/Ti3C2Tx and Pd-SnO2/Ti3C2Tx nanocomposites. Theoretical simulations contribute to a deeper understanding of the doping effects, providing essential insights into the mechanisms underlying the enhanced gas response of the gas sensors. Overall, this work provides valuable insights into the gas-sensing mechanisms and introduces a novel approach for high-performance multiarray gas sensing.