RESUMO
Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has rapidly spread and resulted in the global pandemic of COVID-19. Although IgM/IgG serology assay has been widely used, with the entire spike or nucleocapsid antigens, they only indicate the presence or absence of antibodies against these proteins but are not specific to the neutralization antibodies, therefore providing only generic information about infection stage and possible future immune protection. Novel technologies enabling easy-to-use and sensitive detection of multiple specific antibodies simultaneously will facilitate precise diagnosis of infection stage, prediction of clinical outcomes, and evaluation of future immune protection upon viral exposure or vaccination. Here, we demonstrate a rapid and ultrasensitive quantification method for epitope-specific antibodies, including different isotypes and subclasses, in a multiplexed manner. Using an ultrabright fluorescent nanolabel, plasmonic-fluor, this novel assay can be completed in 20 min and more importantly, the limit of detection of the plasmon-enhanced immunoassay for SARS-CoV-2 antibodies is as much as 100-fold lower compared to the assays relying on enzymatic amplification of colorimetric signals. Using convalescent patient plasma, we demonstrate that this biodetection method reveals the patient-to-patient variability in immune response as evidenced by the variations in whole protein and epitope-specific antibodies. This cost-effective, rapid, and ultrasensitive plasmonically enhanced multiplexed epitope-specific serological assay has the potential to be broadly employed in the detection of specific antibodies, which may benefit the advanced epidemiology studies and enable improvement of the clinical outcomes and prediction of the future protection against the SARS-CoV-2.
Assuntos
COVID-19 , Anticorpos Antivirais , Epitopos , Humanos , Pandemias , SARS-CoV-2 , Sensibilidade e EspecificidadeRESUMO
The Competition-Enhanced Ligand Selection (CompELS) approach was used to identify aptamer candidates for spherical gold nanoparticles (AuNPs). This approach differs from conventional Systematic Evolution of Ligands by EXponential enrichment (SELEX)-based aptamer screening by eliminating repeated elution and polymerase chain reaction (PCR) amplification steps of bound candidate sequences between each selection round to continually enrich the candidate aptamer pool with oligonucleotides remaining from an earlier SELEX selection round. Instead, a new pool of unenriched oligonucleotides is added during each CompELS selection round to compete with existing target-bound oligonucleotides species for target binding sites. In this study, 24 aptamer candidates for AuNPs were identified using the CompELS approach and then compared to reveal similarities in their primary structures and their predicted secondary structures. No strong patterns in individual base identities (position-dependent) nor in segments of consecutive bases (independent of position) prevailed among the identified sequences. Motifs in predicted secondary structures, on the other hand, were shared among otherwise unrelated aptamer sequences. These motifs were revealed using a systematic classification and enumeration of distinct secondary structure elements, namely, hairpins, duplexes, single-stranded segments, interior loops, bulges, and multibranched loops.
Assuntos
Aptâmeros de Nucleotídeos , Nanopartículas Metálicas , Ouro , Ligantes , Técnica de Seleção de AptâmerosRESUMO
Bio-inspired approaches represent potentially transformational methods to fabricate and activate non-natural materials for applications ranging from biomedical diagnostics to energy harvesting platforms. Recently, bio-based methods for the exfoliation of graphene in water have been developed, resulting in peptide-capped nanosheets; however, a clear understanding of the reaction system and peptide ligand structure remains unclear, limiting the advance of such approaches. Here the effects of reaction solution conditions and peptide ligand structure were systematically examined for graphene exfoliation, identifying key parameters to optimize material production. For this, the P1 peptide, identified with affinity for graphene, was exploited to drive exfoliation of bulk graphite to generate the final materials. The peptide was modified at both the N- and C-terminus with a 10-carbon chain fatty acid to explore the effects of a hydrophobic domain on the exfoliation process. The system was examined as a function of sonication time, pH, reagent concentration, and graphite source, where the final materials were fully characterized using a suite of approaches. Collectively, these results demonstrated that maximum graphene production was achieved using the parent P1 peptide after 12 h of sonication under basic conditions. While the exfoliation efficiency was slightly lower for the fatty acid modified peptides, the graphene produced using these biomolecules had fewer defects incorporated, potentially from the wrapping of the nanosheet edge by the aliphatic domain. Such results are important to provide key reaction designs to optimize the reproducibility of graphene exfoliation using biomimetic approaches.
RESUMO
Physiological sensors in a wearable form have rapidly emerged on the market due to technological breakthroughs and have become nearly ubiquitous with the Apple Watch, FitBit, and other wearable devices. While these wearables mostly monitor simple biometric signatures, new devices that can report on the human readiness level through sensing molecular biomarkers are critical to optimizing the human factor in both commercial sectors and the Department of Defense. The military is particularly interested in real-time, wearable, minimally invasive monitoring of fatigue and human performance to improve the readiness and performance of the war fighter. However, very few devices have ventured into the realm of reporting directly on biomarkers of interest. Primarily this is because of the difficulties of sampling biological fluids in real-time and providing accurate readouts using highly selective and sensitive sensors. When additional restrictions to only use sweat, an excretory fluid, are enforced to minimize invasiveness, the demands on sensors becomes even greater due to the dilution of the biomarkers of interest, as well as variability in salinity, pH, and other physicochemical variables which directly impact the read-out of real-time biosensors. This Account will provide a synopsis not only on exemplary demonstrations and technological achievements toward implementation of real-time, wearable sweat sensors but also on defining problems that still remain toward implementation in wearable devices that can detect molecular biomarkers for real world applications. First, the authors describe the composition of minimally invasive biofluids and then identify what biomarkers are of interest as biophysical indicators. This Account then reviews demonstrated techniques for extracting biofluids from the site of generation and transport to the sensor developed by the authors. Included in this discussion is a detailed description on biosensing recognition elements and transducers developed by the authors to enable generation of selective electrochemical sensing platforms. The authors also discuss ongoing efforts to identify biorecognition elements and the chemistries necessary to enable high affinity, selective biorecognition elements. Finally, this Account presents the requirements for wearable, real-time sensors to be (1) highly stable, (2) portable, (3) reagentless, (4) continuous, and (5) responsive in real-time, before delving into specific methodologies to sense classes of biomarkers that have been explored by academia, government laboratories, and industry. Each platform has its areas of greatest utility, but also come with corresponding weaknesses: (1) ion selective electrodes are robust and have been demonstrated in wearables but are limited to detection of ions, (2) enzymatic sensors enable indirect detection of metabolites and have been demonstrated in wearables, but the compounds that can be detected are limited to a subset of small molecules and the sensors are sensitive to flow, (3) impedance-based sensors can detect a wide range of compounds but require further research and development for deployment in wearables. In conclusion, while substantial progress has been made toward wearable molecular biosensors, substantial barriers remain and need to be solved to enable deployment of minimally invasive, wearable biomarker monitoring devices that can accurately report on psychophysiological status.
Assuntos
Biomarcadores/análise , Técnicas Biossensoriais/métodos , Monitorização Fisiológica/métodos , Suor/química , Dispositivos Eletrônicos Vestíveis , Técnicas Biossensoriais/instrumentação , Técnicas Eletroquímicas/instrumentação , Técnicas Eletroquímicas/métodos , Humanos , Monitorização Fisiológica/instrumentaçãoRESUMO
Through the use of the limited materials palette, optimally designed micro- and nanostructures, and tightly regulated processes, nature demonstrates exquisite control of light-matter interactions at various length scales. In fact, control of light-matter interactions is an important element in the evolutionary arms race and has led to highly engineered optical materials and systems. In this review, we present a detailed summary of various optical effects found in nature with a particular emphasis on the materials and optical design aspects responsible for their optical functionality. Using several representative examples, we discuss various optical phenomena, including absorption and transparency, diffraction, interference, reflection and antireflection, scattering, light harvesting, wave guiding and lensing, camouflage, and bioluminescence, that are responsible for the unique optical properties of materials and structures found in nature and biology. Great strides in understanding the design principles adapted by nature have led to a tremendous progress in realizing biomimetic and bioinspired optical materials and photonic devices. We discuss the various micro- and nanofabrication techniques that have been employed for realizing advanced biomimetic optical structures.
RESUMO
In contrast to sophisticated high-throughput sequencing tools for genomic DNA, analytical tools for comparing secondary structure features between multiple single-stranded DNA sequences are less developed. For single-stranded nucleic acid ligands called aptamers, secondary structure is widely thought to play a pivotal role in driving recognition-based binding activity between an aptamer sequence and its specific target. Here, we employ a competition-based aptamer screening platform called CompELS to identify DNA aptamers for a colloidal target. We then analyze predicted secondary structures of the aptamers and a large population of random sequences to identify sequence features and patterns. Our secondary structure analysis identifies patterns ranging from position-dependent score matrixes of individual structural elements to position-independent consensus domains resulting from global alignment.
Assuntos
Aptâmeros de Nucleotídeos/química , Conformação de Ácido Nucleico , Técnica de Seleção de Aptâmeros/métodos , Sequência de Bases , DNA de Cadeia Simples , Biblioteca Gênica , Ligantes , Matrizes de Pontuação de Posição EspecíficaRESUMO
Interfacing biomolecules with functional materials is a key strategy toward achieving externally-triggered biological function. The rational integration of functional proteins, such as enzymes, with plasmonic nanostructures that exhibit unique optical properties such as photothermal effect provides a means to externally control the enzyme activity. However, due to the labile nature of enzymes, the photothermal effect of plasmonic nanostructures is mostly utilized for the enhancement of the biocatalytic activity of thermophilic enzymes. In order to extend and utilize the photothermal effect to a broader class of enzymes, a means to stabilize the immobilized active protein is essential. Inspired by biomineralization for the encapsulation of soft tissue within protective exteriors in nature, metal-organic framework is utilized to stabilize the enzyme. This strategy provides an effective route to enhance and externally modulate the biocatalytic activity of enzymes bound to functional nanostructures over a broad range of operating environments that are otherwise hostile to the biomolecules.
Assuntos
Ensaios Enzimáticos/métodos , Nanopartículas Metálicas/química , Catálise , Nanoestruturas/química , Ressonância de Plasmônio de SuperfícieRESUMO
DNA aptamers that bind biomolecular targets are of interest as the recognition element in colorimetric sensors based on gold nanoparticles (AuNP), where sensor functionality is related to changes in AuNP colloidal stability upon target binding. In order to understand the role of target binding on DNA-AuNP colloidal stability, we have used high-resolution NMR to characterize the interactions of the 36 nucleotide cocaine-binding aptamer (MN4) and related aptamers with AuNPs, cocaine, and cocaine metabolites. Changes in the aptamer imino proton NMR spectra with low (20 nM) concentrations of AuNP show that the aptamers undergo fast-exchange adsorption on the nanoparticle surface. An analysis of the spectral changes and the comparison with modified MN4 aptamers shows that the AuNP binding domain is localized on stem two of the three-stemmed aptamer. The identification of an AuNP recognition domain allows for the incorporation of AuNP binding functionality into a wide variety of aptamers. AuNP-induced spectral changes are not observed for the aptamer-AuNP mixtures in the presence of cocaine, demonstrating that aptamer absorption on the AuNP surface is modulated by aptamer-target interactions. The data also show that the DNA-AuNP interactions and sensor functionality are critically dependent on aptamer folding.
Assuntos
Aptâmeros de Nucleotídeos/química , Ouro/química , Nanopartículas Metálicas/química , Aptâmeros de Nucleotídeos/genética , Sequência de Bases , Concentração Osmolar , TemperaturaRESUMO
The physicochemical properties of abiotic nanostructures determine the structure and function of biological counterparts in biotic-abiotic nanohybrids. A comprehensive understanding of the interfacial interactions and the predictive capability of their structure and function is paramount for virtually all fields of bionanotechnology. In this study, using plasmonic nanostructures as a model abiotic system, we investigate the effect of the surface charge of nanostructures on the biocatalytic reaction kinetics of a bound enzyme. We found that the surface charge of nanostructures profoundly influences the structure, orientation, and activity of the bound enzyme. Furthermore, the interactions of the enzyme with nanoparticles result in stable conjugates that retain their functionality at elevated temperatures, unlike their free counterparts that lose their secondary structure and biocatalytic activity.
RESUMO
Owing to their ability to confine and manipulate light at the nanoscale, plasmonic nanostructures are highly attractive for a broad range of applications. While tremendous progress has been made in the synthesis of size- and shape-controlled plasmonic nanostructures, their integration with other materials and application in solid-state is primarily through their assembly on rigid two-dimensional (2D) substrates, which limits the plasmonically active space to a few nanometers above the substrate. In this work, we demonstrate a simple method to create plasmonically active three-dimensional biofoams by integrating plasmonic nanostructures with highly porous biomaterial aerogels. We demonstrate that plasmonic biofoam is a versatile optically active platform that can be harnessed for numerous applications including (i) ultrasensitive chemical detection using surface-enhanced Raman scattering; (ii) highly efficient energy harvesting and steam generation through plasmonic photothermal heating; and (iii) optical control of enzymatic activity by triggered release of biomolecules encapsulated within the aerogel. Our results demonstrate that 3D plasmonic biofoam exhibits significantly higher sensing, photothermal, and loading efficiency compared to conventional 2D counterparts. The design principles and processing methodology of plasmonic aerogels demonstrated here can be broadly applied in the fabrication of other functional foams.
Assuntos
Celulose/química , Nanoestruturas/química , Óptica e Fotônica , Ouro/química , Luz , Análise Espectral Raman , Ressonância de Plasmônio de SuperfícieRESUMO
Peptide-enabled nanoparticle (NP) synthesis routes can create and/or assemble functional nanomaterials under environmentally friendly conditions, with properties dictated by complex interactions at the biotic/abiotic interface. Manipulation of this interface through sequence modification can provide the capability for material properties to be tailored to create enhanced materials for energy, catalysis, and sensing applications. Fully realizing the potential of these materials requires a comprehensive understanding of sequence-dependent structure/function relationships that is presently lacking. In this work, the atomic-scale structures of a series of peptide-capped Au NPs are determined using a combination of atomic pair distribution function analysis of high-energy X-ray diffraction data and advanced molecular dynamics (MD) simulations. The Au NPs produced with different peptide sequences exhibit varying degrees of catalytic activity for the exemplar reaction 4-nitrophenol reduction. The experimentally derived atomic-scale NP configurations reveal sequence-dependent differences in structural order at the NP surface. Replica exchange with solute-tempering MD simulations are then used to predict the morphology of the peptide overlayer on these Au NPs and identify factors determining the structure/catalytic properties relationship. We show that the amount of exposed Au surface, the underlying surface structural disorder, and the interaction strength of the peptide with the Au surface all influence catalytic performance. A simplified computational prediction of catalytic performance is developed that can potentially serve as a screening tool for future studies. Our approach provides a platform for broadening the analysis of catalytic peptide-enabled metallic NP systems, potentially allowing for the development of rational design rules for property enhancement.
Assuntos
Ouro/química , Nanopartículas Metálicas , Peptídeos/química , Catálise , Microscopia Eletrônica de Transmissão , Relação Estrutura-Atividade , Difração de Raios XRESUMO
The ability to precisely and remotely modulate reversible binding interactions between biomolecules and abiotic surfaces is appealing for many applications. To achieve this level of control, an azobenzene-based optical switch is added to nanoparticle-binding peptides in order to switch peptide conformation and attenuate binding affinity to gold surfaces via binding and dissociation of peptides.
Assuntos
Compostos Azo/química , Ouro/química , Peptídeos/química , Sítios de Ligação , Fenômenos Ópticos , Propriedades de SuperfícieRESUMO
For almost a century, the iridescence of tropical Morpho butterfly scales has been known to originate from 3D vertical ridge structures of stacked periodic layers of cuticle separated by air gaps. Here we describe a biological pattern of surface functionality that we have found in these photonic structures. This pattern is a gradient of surface polarity of the ridge structures that runs from their polar tops to their less-polar bottoms. This finding shows a biological pattern design that could stimulate numerous technological applications ranging from photonic security tags to self-cleaning surfaces, gas separators, protective clothing, sensors, and many others. As an important first step, this biomaterial property and our knowledge of its basis has allowed us to unveil a general mechanism of selective vapor response observed in the photonic Morpho nanostructures. This mechanism of selective vapor response brings a multivariable perspective for sensing, where selectivity is achieved within a single chemically graded nanostructured sensing unit, rather than from an array of separate sensors.
Assuntos
Estruturas Animais/anatomia & histologia , Borboletas/anatomia & histologia , Pigmentação , Estruturas Animais/efeitos dos fármacos , Animais , Borboletas/efeitos dos fármacos , Simulação por Computador , Fenômenos Ópticos , Oxigênio/farmacologia , Pigmentação/efeitos dos fármacos , Reprodutibilidade dos Testes , Propriedades de Superfície , Volatilização/efeitos dos fármacosRESUMO
Synthetic hemozoin crystals (ß-hematin) are assembled with aluminium nanoparticles (nAl) to create a nanomaterial composite that is highly energetic and reactive. The results here demonstrate that hemozoin rapidly oxidizes the nAl fuel to release large amounts of energy (+12.5 ± 2.4 kJ g(-1) ).
Assuntos
Alumínio/química , Materiais Biomiméticos/química , Transferência de Energia , Heme/química , Nanopartículas Metálicas/química , Nanoconjugados/química , Cristalização/métodos , Temperatura Alta , Nanopartículas Metálicas/ultraestrutura , Nanoconjugados/ultraestrutura , Tamanho da PartículaRESUMO
2D transition metal dichalcogenides (TMDCs) are nanomanufactured using a generalized strategy with self-assembled DNA nanotubes. DNA nanotubes of various lengths serve as lithographic etch masks for the dry etching of TMDCs. The nanostructured TMDCs are studied by atomic force microscopy, photoluminescence, and Raman spectroscopy. This parallel approach can be used to manufacture 2D TMDC nanostructures of arbitrary geometries with molecular-scale precision.
Assuntos
Calcogênios/química , DNA/química , Metais/química , Nanotubos/química , Impressão Tridimensional , DNA/ultraestrutura , Teste de Materiais , Nanotubos/ultraestruturaRESUMO
Protein- and peptide-based structural biopolymers are abundant building blocks of biological systems. Either in their natural forms, such as collagen, silk or fibronectin, or as related synthetic materials they can be used in various technologies. An emerging area is that of biomimetic materials inspired by protein-based biopolymers, which are made up of small molecules rather than macromolecules and can therefore be described as supramolecular polymers. These materials are very useful in biomedical applications because of their ability to imitate the extracellular matrix both in architecture and their capacity to signal cells. This article describes important features of the natural extracellular matrix and highlight how these features are being incorporated into biomaterials composed of biopolymers and supramolecular polymers. We particularly focus on the structures, properties, and functions of collagen, fibronectin, silk, and the supramolecular polymers inspired by them as biomaterials for regenerative medicine.
RESUMO
The properties of nanoparticle superstructures depend on many factors, including the structural metrics of the nanoparticle superstructure (particle diameter, interparticle distances, etc.). Here, we introduce a family of gold-binding peptide conjugate molecules that can direct nanoparticle assembly, and we describe how these molecules can be systematically modified to adjust the structural metrics of linear double-helical nanoparticle superstructures. Twelve new peptide conjugates are prepared via linking a gold-binding peptide, AYSSGAPPMPPF (PEP(Au)), to a hydrophobic aliphatic tail. The peptide conjugates have 1, 2, or 3 PEP(Au) headgroups and a C12, C14, C16, or C18 aliphatic tail. The soft assembly of these peptide conjugates was studied using transmission electron microscopy (TEM), atomic force microscopy (AFM), and infrared (IR) spectroscopy. Several peptide conjugates assemble into 1-D twisted fibers having measurable structural parameters such as fiber width, thickness, and pitch that can be systematically varied by adjusting the aliphatic tail length and number of peptide headgroups. The linear soft assemblies serve as structural scaffolds for arranging gold nanoparticles into double-helical superstructures, which are examined via TEM. The pitch and interparticle distances of the gold nanoparticle double helices correspond to the underlying metrics of the peptide conjugate soft assemblies, illustrating that designed peptide conjugate molecules can be used to not only direct the assembly of gold nanoparticles but also control the metrics of the assembled structure.
Assuntos
Ouro/química , Nanopartículas Metálicas/química , Peptídeos/química , Estrutura Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
The effect of adding nucleic acids to gold seeds during the growth stage of either nanospheres or nanorods was investigated using UV-Vis spectroscopy to reveal any oligonucleotide base or structure-specific effects on nanoparticle growth kinetics or plasmonic signatures. Spectral data indicate that the presence of DNA duplexes during seed ageing drastically accelerated nanosphere growth while the addition of single-stranded polyadenine at any point during seed ageing induces nanosphere aggregation. For seeds added to a gold nanorod growth solution, single-stranded polythymine induces a modest blue-shift in the longitudinal peak wavelength. Moreover, a particular sequence comprised of 50% thymine bases was found to induce a faster, more dramatic blue-shift in the longitudinal peak wavelength compared to any of the homopolymer incubation cases. Monomeric forms of the nucleic acids, however, do not yield discernable spectral differences in any of the gold suspensions studied.
RESUMO
Transitioning energy-intensive and environmentally intensive processes toward sustainable conditions is necessary in light of the current global condition. To this end, photocatalytic processes represent new approaches for H2 generation; however, their application toward tandem catalytic reactivity remains challenging. Here, we demonstrate that metal oxide materials decorated with noble metal nanoparticles advance visible light photocatalytic activity toward new reactions not typically driven by light. For this, Pd nanoparticles were deposited onto Cu2O cubes to generate a composite structure. Once characterized, their hydrodehalogenation activity was studied via the reductive dechlorination of polychlorinated biphenyls. To this end, tandem catalytic reactivity was observed with H2 generation via H2O reduction at the Cu2O surface, followed by dehalogenation at the Pd using the in situ generated H2. Such results present methods to achieve sustainable catalytic technologies by advancing photocatalytic approaches toward new reaction systems.
RESUMO
In this study, we utilize plasma-enhanced chemical vapor deposition (PECVD) for the deposition of nanostructures composed of diphenylalanine. PECVD is a solvent-free approach and allows sublimation of the peptide to form dense, uniform arrays of peptide nanostructures on a variety of substrates. The PECVD deposited d-diphenylalanine nanostructures have a range of chemical and physical properties depending on the specific discharge parameters used during the deposition process.