Peptide hydrogen-bonded organic frameworks.

Hydrogen-bonded porous frameworks (HPFs) are versatile porous crystalline frameworks with diverse applications. However, designing chiral assemblies or biocompatible materials poses significant challenges. Peptide-based hydrogen-bonded porous frameworks (P-HPFs) are an exciting alternative to conventional HPFs due to their intrinsic chirality, tunability, biocompatibility, and structural diversity. Flexible, ultra-short peptide-based P-HPFs (composed of 3 or fewer amino acids) exhibit adaptable porous topologies that can accommodate a variety of guest molecules and capture hazardous greenhouse gases. Longer, folded peptides present challenges and opportunities in designing P-HPFs. This review highlights recent developments in P-HPFs using ultra-short peptides, folded peptides, and foldamers, showcasing their utility for gas storage, chiral recognition, chiral separation, and medical applications. It also addresses design challenges and future directions in the field.

MOFs with Open Metal(III) Sites for the Environmental Capture of Polar Volatile Organic Compounds.

Metal-Organic Frameworks (MOFs) with open metal sites (OMS) interact strongly with a range of polar gases/vapors. However, under ambient conditions, their selective adsorption is generally impaired due to a high OMS affinity to water. This led previously to the privilege selection of hydrophobic MOFs for the selective capture/detection of volatile organic compounds (VOCs). Herein, we show that this paradigm is challenged by metal(III) polycarboxylates MOFs, bearing a high concentration of OMS, as MIL-100(Fe), enabling the selective capture of polar VOCs even in the presence of water. With experimental and computational tools, including single-component gravimetric and dynamic mixture adsorption measurements, in situ infrared (IR) spectroscopy and Density Functional Theory calculations we reveal that this adsorption mechanism involves a direct coordination of the VOC on the OMS, associated with an interaction energy that exceeds that of water. Hence, MOFs with OMS are demonstrated to be of interest for air purification purposes.

An Ultra-Microporous Metal-Organic Framework with Exceptional Xe Capacity.

Molecular confinement plays a significant effect on trapped gas and solvent molecules. A fundamental understanding of gas adsorption within the porous confinement provides information necessary to design a material with improved selectivity. In this regard, metal-organic framework (MOF) adsorbents are ideal candidate materials to study confinement effects for weakly interacting gas molecules, such as noble gases. Among the noble gases, xenon (Xe) has practical applications in the medical, automotive and aerospace industries. In this Communication, we report an ultra-microporous nickel-isonicotinate MOF with exceptional Xe uptake and selectivity compared to all benchmark MOF and porous organic cage materials. The selectivity arises because of the near perfect fit of the atomic Xe inside the porous confinement. Notably, at low partial pressure, the Ni-MOF interacts very strongly with Xe compared to the closely related Krypton gas (Kr) and more polarizable CO2 . Further 129 Xe NMR suggests a broad isotropic chemical shift due to the reduced motion as a result of confinement.

Preferential Adsorption of CO2 in an Ultramicroporous MOF with Cavities Lined by Basic Groups and Open-Metal Sites.

Here, we present a new ultramicroporous Cu2 paddlewheel based MOF. This ultramicroporous MOF has most of the features such as porosity (BET surface area = 945 m2/g), CO2 capacity (3.5 mmol/g at ambient temperature and pressure), CO2/N2 selectivity (sCO2/N2 = 250), and fast CO2 diffusion kinetics ( Dc = 2.25 × 10-9 m2/s), comparable to some of the other high-performing ultramicroporous MOFs, with strong binding sites. Typically, such MOFs exhibit strong CO2-framework interactions (evidenced from a heat of adsorption ≥ 38 kJ/mol). However, the MOF explained here, despite having channels lined by the amine and the open-metal sites, possesses only a moderate CO2-framework interaction (HOA = 26 kJ/mol). Using periodic DFT, we have probed this counterintuitive observation.

Ultralow Parasitic Energy for Postcombustion CO2 Capture Realized in a Nickel Isonicotinate Metal-Organic Framework with Excellent Moisture Stability.

Metal-organic frameworks (MOFs) have attracted significant attention as solid sorbents in gas separation processes for low-energy postcombustion CO2 capture. The parasitic energy (PE) has been put forward as a holistic parameter that measures how energy efficient (and therefore cost-effective) the CO2 capture process will be using the material. In this work, we present a nickel isonicotinate based ultramicroporous MOF, 1 [Ni-(4PyC)2·DMF], that has the lowest PE for postcombustion CO2 capture reported to date. We calculate a PE of 655 kJ/kg CO2, which is lower than that of the best performing material previously reported, Mg-MOF-74. Further, 1 exhibits exceptional hydrolytic stability with the CO2 adsorption isotherm being unchanged following 7 days of steam-treatment (>85% RH) or 6 months of exposure to the atmosphere. The diffusion coefficient of CO2 in 1 is also 2 orders of magnitude higher than in zeolites currently used in industrial scrubbers. Breakthrough experiments show that 1 only loses 7% of its maximum CO2 capacity under humid conditions.

Secondary Interactions Arrest the Hemiaminal Intermediate To Invert the Modus Operandi of Schiff Base Reaction: A Route to Benzoxazinones.

Discovered by Hugo Schiff, condensation between amine and aldehyde represents one of the most ubiquitous reactions in chemistry. This classical reaction is widely used to manufacture pharmaceuticals and fine chemicals. However, the rapid and reversible formation of Schiff base prohibits formation of alternative products, of which benzoxazinones are an important class. Therefore, manipulating the reactivity of two partners to invert the course of this reaction is an elusive target. Presented here is a synthetic strategy that regulates the sequence of Schiff base reaction via weak secondary interactions. Guided by the computational models, reaction between 2,3,4,5,6-pentafluoro-benzaldehyde with 2-amino-6-methylbenzoic acid revealed quantitative (99%) formation of 5-methyl-2-(perfluorophenyl)-1,2-dihydro-4H-benzo[d][1,3]oxazin-4-one (15). Electron donating and electron withdrawing ortho-substituents on 2-aminobenzoic acid resulted in the production of benzoxazinones 9-36. The mode of action was tracked using low temperature NMR, UV-vis spectroscopy, and isotopic (18O) labeling experiments. These spectroscopic mechanistic investigations revealed that the hemiaminal intermediate is arrested by the hydrogen-bonding motif to yield benzoxazinone. Thus, the mechanistic investigations and DFT calculations categorically rule out the possibility of in situ imine formation followed by ring-closing, but support instead hydrogen-bond assisted ring-closing to prodrugs. This unprecedented reaction represents an interesting and competitive alternative to metal catalyzed and classical methods of preparing benzoxazinone.

A neutral cluster cage with a tetrahedral [Pd12(II)L6] framework: crystal structures and host­guest studies.

A charge-neutral tetrahedral [(Pd3X)4L6] cage assembly built from a trinuclear polyhedral building unit (PBU), [Pd3X](3+), cis-blocked with an imido P(V) ligand, [(N(i)Pr)3PO](3-) (X(3-)), and oxalate dianions (L(2-)) is reported. Use of benzoate or ferrocene dicarboxylate anions, which do not offer wide-angle chelation as that of oxalate dianions, leads to smaller prismatic clusters instead of polyhedral cage assemblies. The porosity of the tetrahedral cage assembly was determined by gas adsorption studies, which show a higher uptake capacity for CO2 over N2 and H2. The tetrahedral cage was shown to encapsulate a wide range of neutral guest solvents from polar to nonpolar such as dimethyl sulfoxide, benzene, dichloromethane, chloroform, carbon tetrachloride, and cyclopentane as observed by mass spectral and single-crystal X-ray diffraction studies. The (1)H two-dimensional diffusion ordered spectroscopy NMR analysis shows that the host and guest molecules exhibit similar diffusion coefficients in all the studied host-guest systems. Further, the tetrahedral cage shows selective binding of benzene, CCl4, and cyclopentane among other solvents from their categories as evidenced from mass spectral analysis. A preliminary density functional theory analysis gave a highest binding energy for benzene among the other solvents that were structurally shown to be encapsulated at the intrinsic cavity of the tetrahedral cage.

Hypervalent iodine mediated synthesis of C-2 deoxy glycosides and amino acid glycoconjugates.

A simple, efficient, and practical method for the synthesis of C-2 deoxy-2-iodo glycoconjugates in self-assembled structures was found using PhI(OCOR)2. 2-Iodo glycoserinyl esters were intramolecularly converted into 2-iodo serinyl glycosides which upon dehalogenation gave C-2 deoxy amino acid glycoconjugates.

Metal-driven folding and assembly of a minimal ß-sheet into a 3D-porous honeycomb framework.

In contrast to short helical peptides, constrained peptides, and foldamers, the design and fabrication of crystalline 3D frameworks from the ß-sheet peptides are rare because of their high self-aggregation propensity to form 1D architectures. Herein, we demonstrate the formation of a 3D porous honeycomb framework through the silver coordination of a minimal ß-sheet forming a peptide having terminal metal coordinated 4- and 3-pyridyl ligands.

When Polymorphism in Metal-Organic Frameworks Enables Water Sorption Profile Tunability for Enhancing Heat Allocation and Water Harvesting Performance.

The development of thermally driven water-sorption-based technologies relies on high-performing water vapor adsorbents. Here, polymorphism in Al-metal-organic frameworks is disclosed as a new strategy to tune the hydrophilicity of MOFs. This involves the formation of MOFs built from chains of either trans- or cis- µ-OH-connected corner-sharing AlO4(OH)2 octahedra. Specifically, [Al(OH)(muc)] or MIP-211, is made of trans, trans-muconate linkers, and cis-µ-OH-connected corner-sharing AlO4(OH)2 octahedra giving a 3D network with sinusoidal channels. The polymorph MIL-53-muc has a tiny change in the chain structure that results in a shift of the step position of the water isotherm from P/P0 ≈ 0.5 in MIL-53-muc, to P/P0 ≈ 0.3 in MIP-211. Solid-state NMR and Grand Canonical Monte Carlo reveal that the adsorption occurs initially between two hydroxyl groups of the chains, favored by the cis-positioning in MIP-211, resulting in a more hydrophilic behavior. Finally, theoretical evaluations show that MIP-211 would allow achieving a coefficient of performance for cooling (COPc) of 0.63 with an ultralow driving temperature of 60 °C, outperforming benchmark sorbents for small temperature lifts. Combined with its high stability, easy regeneration, huge water uptake capacity, green synthesis, MIP-211 is among the best adsorbents for adsorption-driven air conditioning and water harvesting from the air.

A Scalable Robust Microporous Al-MOF for Post-Combustion Carbon Capture.

Herein, a robust microporous aluminum tetracarboxylate framework, MIL-120(Al)-AP, (MIL, AP: Institute Lavoisier and Ambient Pressure synthesis, respectively) is reported, which exhibits high CO2 uptake (1.9 mmol g-1 at 0.1 bar, 298 K). In situ Synchrotron X-ray diffraction measurements together with Monte Carlo simulations reveal that this structure offers a favorable CO2 capture configuration with the pores being decorated with a high density of µ2-OH groups and accessible aromatic rings. Meanwhile, based on calculations and experimental evidence, moderate host-guest interactions Qst (CO2) value of MIL-120(Al)-AP (-40 kJ mol-1) is deduced, suggesting a relatively low energy penalty for full regeneration. Moreover, an environmentally friendly ambient pressure green route, relying on inexpensive raw materials, is developed to prepare MIL-120(Al)-AP at the kilogram scale with a high yield while the Metal- Organic Framework (MOF) is further shaped with inorganic binders as millimeter-sized mechanically stable beads. First evidences of its efficient CO2/N2 separation ability are validated by breakthrough experiments while operando IR experiments indicate a kinetically favorable CO2 adsorption over water. Finally, a techno-economic analysis gives an estimated production cost of ≈ 13 $ kg-1, significantly lower than for other benchmark MOFs. These advancements make MIL-120(Al)-AP an excellent candidate as an adsorbent for industrial-scale CO2 capture processes.

A robust ultra-microporous cationic aluminum-based metal-organic framework with a flexible tetra-carboxylate linker.

Al-based cationic metal-organic frameworks (MOFs) are uncommon. Here, we report a cationic Al-MOF, MIP-213(Al) ([Al18(µ2-OH)24(OH2)12(mdip)6]6Cl·6H2O) constructed from flexible tetra-carboxylate ligand (5,5'-Methylenediisophthalic acid; H4mdip). Its crystal structure was determined by the combination of three-dimensional electron diffraction (3DED) and high-resolution powder X-ray diffraction. The structure is built from infinite corner-sharing chains of AlO4(OH)2 and AlO2(OH)3(H2O) octahedra forming an 18-membered rings honeycomb lattice, similar to that of MIL-96(Al), a scarce Al-polycarboxylate defective MOF. Despite sharing these structural similarities, MIP-213(Al), unlike MIL-96(Al), lacks the isolated µ3-oxo-bridged Al-clusters. This leads to an ordered defective cationic framework whose charge is balanced by Cl- sandwiched between two Al-trimers at the corner of the honeycomb, showing strong interaction with terminal H2O coordinated to the Al-trimers. The overall structure is endowed by a narrow quasi-1D channel of dimension ~4.7 Å. The Cl- in the framework restrains the accessibility of the channels, while the MOF selectively adsorbs CO2 over N2 and possesses high hydrolytic stability.

Coordination Flexibility Aided CO2 -specific Gating in an Iron Isonicotinate MOF.

Coordination flexibility assisted porosity has been introduced into an Iron-isonicotinate metal-organic framework (MOF), (Fe(4-PyC)2 ⋅ (OH). The framework showed CO2 -specific gate opening behavior, which gets tuned as a function of temperature and pressure. The MOF's physisorptive porosity towards CO2 , CH4 , and N2 was investigated; it adsorbed only CO2 via a gate opening phenomenon. The isonicotinate, representing a borderline soft base, is bound to the hard Fe3+ centre through monodentate carboxylate and pyridyl nitrogen. This moderately weak binding enables isonicotinate to spin like a spindle under the CO2 pressure opening the gate for a sharp increase in CO2 uptake at 333 mmHg (At 298 K, the CO2 uptake increases from 0.70 to 1.57 mmol/g). We investigated the MOF's potential for CO2 /N2 and CO2 /CH4 gas separation aided by this gating. IAST model reveals that the CO2 /N2 selectivity jumps from 325 to 3131 when the gate opens, while the CO2 /CH4 selectivity increases three times. Interestingly, this Fe-isonicotinate MOF did not follow the trend set by our earlier reported Hard-Soft Gate Control (established for isostructural M2+ -isonicotinate MOFs (M=Mg, Mn)). However, we account for this discrepancy using the different oxidation state of metals confirmed by X-ray photoelectron spectroscopy and magnetism.

Deciphering the Weak CO2···Framework Interactions in Microporous MOFs Functionalized with Strong Adsorption Sites-A Ubiquitous Observation.

Carbon capture from industrial effluents such as flue gas or natural gas mixture (cf. landfill gas), the primary sources of CO2 emission, greatly aids in balancing the environmental carbon cycle. In this context, the most energy-efficient physisorptive CO2 separation process can benefit immensely from improved porous sorbents. Metal organic frameworks (MOFs), especially the ultramicroporous MOFs, built from readily available small and rigid ligands, are highly promising because of their high selectivity (CO2/N2) and easy scalability. Here, we report two new ultramicroporous Co-adeninato isophthalate MOFs. They concomitantly carry basic functional groups (-NH2) and Lewis acidic sites (coordinatively unsaturated Co centers). They show good CO2 capacity (3.3 mmol/g at 303 K and 1 bar) along with high CO2/N2 (∼600 at 313 K and 1 bar and ∼340 at 303 K and 1 bar) selectivity, working capacity, and smooth diffusion kinetics (Dc = 7.5 × 10-9 m2 s-1). The MOFs exhibit good CO2/N2 kinetic separation under both dry and wet conditions with a smooth breakthrough profile. Despite their well-defined CO2 adsorption sites, these MOFs exhibit only a moderately strong interaction with CO2 as evidenced from their HOA values. This counterintuitive observation is ubiquitous among many MOFs adorned with strong CO2 adsorption sites. To gain insights, we have identified the binding sites for CO2 using simulation and MD studies. The radial distribution function analysis reveals that despite the amine and bare-metal sites, the pore size and the pore structure determine the positions for the CO2 molecules. The most favorable sites become the confined spaces lined by aromatic rings. A plausible explanation for the lack of strong adsorption in these MOFs is premised from these collective studies, which could aid in the future design of superior CO2 sorbents.

Multivariate Sulfonic-Based Titanium Metal-Organic Frameworks as Super-protonic Conductors.

The proton-conducting performances of a microporous Ti-based metal-organic framework (MOF), MIP-207, were successfully tuned using a multicomponent ligand replacement strategy to gradually introduce a controlled amount of sulfonic acid groups as a source of Brönsted acidic sites while keeping the robustness and ecofriendly synthesis conditions of the starting material. Typically, multivariate sulfonic-based solids MIP-207-(SO3H-IPA)x-(BTC)1-x were prepared by combining various ratios of trimesate 1,3,5-benzenetricarboxylate (BTC) moieties and 5-SO3H-isophthalate (SO3H-IPA). The best sulfonic-MOF candidate that combines structural integrity with high proton conductivity values (e.g., σ = 2.6 × 10-2 S cm-1 at 363 K/95% relative humidity) was further investigated using ab initio molecular dynamics simulations. These calculations supported that the -SO3H groups act as proton donors and revealed that the proton transfer mechanism results from the solvation structure of protons through the fast Zundel/hydronium interconversion along the continuous H-bonded network connecting the adsorbed water molecules.

Cu/Cu2O Nanoparticles Supported on a Phenol-Pyridyl COF as a Heterogeneous Catalyst for the Synthesis of Unsymmetrical Diynes via Glaser-Hay Coupling.

Covalent organic frameworks (COFs) are a new class of porous crystalline polymers with a modular construct that favors functionalization. COF pores can be used to grow nanoparticles (nPs) with dramatic size reduction, stabilize them as dispersions, and provide excellent nP access. Embedding substrate binding sites in COFs can generate host-guest synergy, leading to enhanced catalytic activity. In this report, Cu/Cu2O nPs (2-3 nm) are grown on a COF, which is built by linking a phenolic trialdehyde and a triamine through Schiff bonds. Their micropores restrict the nP to exceptionally small sizes (∼2-3 nm), and the pore walls decorated with strategically positioned hydrogen-bonding phenolic groups anchor the substrates via hydrogen-bonding, whereas the basic pyridyl sites serve as cationic species to stabilize the [CuclusterCl2]2- type reactive intermediates. This composite catalyst shows high activity for Glaser-Hay heterocoupling reactions, an essential 1,3-diyne yielding reaction with widespread applicability in organic synthesis and material science. Despite their broad successes in homocoupled products, preparation of unsymmetrical 1,3-diynes is challenging due to poor selectivity. Here, our COF-based Cu catalyst shows elevated selectivity toward heterocoupling product(s) (Cu nP loading 0.0992 mol %; turn over frequency: ∼45-50; turn over number: ∼175-190). The reversible redox activity at the Cu centers has been demonstrated by carrying out X-ray photoelectron spectroscopy on the frozen reactions, whereas the crucial interactions between the substrates and the binding sites in their optimized configurations have been modeled using density functional theory methods. This report emphasizes the utility of COFs in developing a heterogeneous catalyst for a truly challenging organic heterocoupling reaction.

Revisiting the water sorption isotherm of MOF using electrical measurements.

Water adsorption/desorption isotherms of Cr-soc-MOF-1 were monitored electrically, with the translation of proton conductivity measurements to physisorption isotherms in terms of S-shape and hysteresis features revealed by volumetry. Molecular modelling further established the relationship between the evolutive water-hydrogen bonded network and the "electrical" isotherm for this water-mediated proton conducting MOF.

Hyper-Cross-linked Porous Organic Frameworks with Ultramicropores for Selective Xenon Capture.

Exceptionally stable ultramicroporous C-C-bonded porous organic frameworks (IISERP-POF6, 7, 8) have been prepared using simple Friedel-Crafts reaction. These polymers exhibit permanent porosity with a Brunauer-Emmett-Teller surface area of 645-800 m2/g. Xe/Kr adsorptive separation has been carried out with these polymers, and they display selective Xe capture ( s(Xe/Kr) = 6.7, 6.3, and 6.3) at 298 K and 1 bar pressure. Interestingly, these polymers also show remarkable Xe/N2 ( s(Xe/N2) = 200, 180, and 160 at 298 K and 1 bar) and Xe/CO2 selectivity ( s(Xe/CO2) = 5.6, 7.4, and 5.6) for a 1:99 composition of Xe-N2/Xe-CO2. Selective removal of Xe at such low concentrations is extremely challenging; the observed selectivities are higher compared to those observed in porous carbons and metal-organic frameworks. Breakthrough studies were performed using the composition relevant to the nuclear off-gas mixture with the polymers, and we find that the polymers hold Xe for a longer time in the column, which illustrates the Xe/Kr separation performance under dynamic conditions.

Carbon Derived from Soft Pyrolysis of a Covalent Organic Framework as a Support for Small-Sized RuO2 Showing Exceptionally Low Overpotential for Oxygen Evolution Reaction.

Electrochemical water splitting is the most energy-efficient technique for producing hydrogen and oxygen, the two valuable gases. However, it is limited by the slow kinetics of the anodic oxygen evolution reaction (OER), which can be improved using catalysts. Covalent organic framework (COF)-derived porous carbon can serve as an excellent catalyst support. Here, we report high electrocatalytic activity of two composites, formed by supporting RuO2 on carbon derived from two COFs with closely related structures. These composites catalyze oxygen evolution from alkaline media with overpotentials as low as 210 and 217 mV at 10 mA/cm2, respectively. The Tafel slopes of these catalysts (65 and 67 mV/dec) indicate fast kinetics compared to commercial RuO2. The observed activity is the highest among all RuO2-based heterogeneous OER catalysts-a touted benchmark OER catalyst. The high catalytic activity arises from the extremely small-sized (∼3-4 nm) RuO2 nanoparticles homogeneously dispersed in a micro-mesoporous (BET = 517 m2/g) COF-derived carbon. The porous graphenic carbon favors mass transfer, while its N-rich framework anchors the catalytic nanoparticles, making it highly stable and recyclable. Crucially, the soft pyrolysis of the COF enables the formation of porous carbon and simultaneous growth of small RuO2 particles without aggregation.

Potential of ultramicroporous metal-organic frameworks in CO2 clean-up.

This article explains the need for energy-efficient large-scale CO2 capture and briefly mentions the requirements for optimal solid sorbents for this application. It illustrates the potential of ultra-microporous metal-organic frameworks (MOFs, pore size: <7.0 Å) for the separation of CO2 from industrially abundant greenhouse gas mixtures. Some high-performing and well-studied MOFs are discussed to communicate the present status of the field. From their structural features, some successful design principles for creating such ultra-microporous MOFs are derived. Towards the close, favorable CO2 diffusion in many of these small pore MOFs is highlighted.