Predicting Airborne Infection Risk: Association Between Personal Ambient Carbon Dioxide Level Monitoring and Incidence of Tuberculosis Infection in South African Health Workers.

BACKGROUND: High rates of tuberculosis (TB) transmission occur in hospitals in high-incidence countries, yet there is no validated way to evaluate the impact of hospital design and function on airborne infection risk. We hypothesized that personal ambient carbon dioxide (CO2) monitoring could serve as a surrogate measure of rebreathed air exposure associated with TB infection risk in health workers (HWs). METHODS: We analyzed baseline and repeat (12-month) interferon-γ release assay (IGRA) results in 138 HWs in Cape Town, South Africa. A random subset of HWs with a baseline negative QuantiFERON Plus (QFT-Plus) underwent personal ambient CO2 monitoring. RESULTS: Annual incidence of TB infection (IGRA conversion) was high (34%). Junior doctors were less likely to have a positive baseline IGRA than other HWs (OR, 0.26; P = .005) but had similar IGRA conversion risk. IGRA converters experienced higher median CO2 levels compared to IGRA nonconverters using quantitative QFT-Plus thresholds of ≥0.35 IU/mL (P < .02) or ≥1 IU/mL (P < .01). Median CO2 levels were predictive of IGRA conversion (odds ratio [OR], 2.04; P = .04, ≥1 IU/mL threshold). Ordinal logistic regression demonstrated that the odds of a higher repeat quantitative IGRA result increased by almost 2-fold (OR, 1.81; P = .01) per 100 ppm unit increase in median CO2 levels, suggesting a dose-dependent response. CONCLUSIONS: HWs face high occupational TB risk. Increasing median CO2 levels (indicative of poor ventilation and/or high occupancy) were associated with higher likelihood of HW TB infection. Personal ambient CO2 monitoring may help target interventions to decrease TB transmission in healthcare facilities and help HWs self-monitor occupational risk, with implications for other airborne infections including coronavirus disease 2019.

Ceiling impact on air disinfection performance of Upper-Room Germicidal Ultraviolet (UR-GUV).

This study used Computational Fluid Dynamics (CFD) to investigate air disinfection for SARS-CoV-2 by the Upper-Room Germicidal Ultraviolet (UR-GUV), with focus on ceiling impact. The study includes three indoor settings, i.e., low (airport bus), medium (classroom) and high (rehearsal room) ceilings, which were ventilated with 100% clean air (CA case), 80% air-recirculation with a low filtration (LF case), and 80% air-recirculation with a high filtration (HF case). According to the results, using UR-GUV can offset the increased infection risk caused by air recirculation, with viral concentrations in near field (NF) and far field (FF) in the LF case similar to those in the CA case. In the CA case, fraction remaining (FR) was 0.48-0.73 with 25% occupancy rate (OR) and 0.49-0.91 with 45% OR in the bus, 0.41 in NF and 0.11 in FF in the classroom, and 0.18 in NF and 0.09 in FF in the rehearsal room. Obviously, UR-GUV performance in NF can be improved in a room with a high ceiling where FR has a power relationship with UV zone height. As using UR-GUV can only extend the exposure time to get infection risk of 1% (T 1% ) to 8 min in NF in the classroom, and 47 min in NF in the rehearsal room, it is necessary to abide by social distancing in the two rooms. In addition, T 1% in FF was calculated to be 18.3 min with 25% OR and 21.4% with 45% OR in the airport bus, showing the necessity to further wear a mask.

Reducing tuberculosis transmission: a consensus document from the World Health Organization Regional Office for Europe.

Evidence-based guidance is needed on 1) how tuberculosis (TB) infectiousness evolves in response to effective treatment and 2) how the TB infection risk can be minimised to help countries to implement community-based, outpatient-based care.This document aims to 1) review the available evidence on how quickly TB infectiousness responds to effective treatment (and which factors can lower or boost infectiousness), 2) review policy options on the infectiousness of TB patients relevant to the World Health Organization European Region, 3) define limitations of the available evidence and 4) provide recommendations for further research.The consensus document aims to target all professionals dealing with TB (e.g TB specialists, pulmonologists, infectious disease specialists, primary healthcare professionals, and other clinical and public health professionals), as well as health staff working in settings where TB infection is prevalent.

Designing and Evaluating Interventions to Halt the Transmission of Tuberculosis.

To reduce the incidence of tuberculosis, it is insufficient to simply understand the dynamics of tuberculosis transmission. Rather, we must design and rigorously evaluate interventions to halt transmission, prioritizing those interventions most likely to achieve population-level impact. Synergy in reducing tuberculosis transmission may be attainable by combining interventions that shrink the reservoir of latent Mycobacterium tuberculosis infection (preventive therapy), shorten the time between disease onset and treatment initiation (case finding and diagnosis), and prevent transmission in key settings, such as the built environment (infection control). In evaluating efficacy and estimating population-level impact, cluster-randomized trials and mechanistic models play particularly prominent roles. Historical and contemporary evidence suggests that effective public health interventions can halt tuberculosis transmission, but an evidence-based approach based on knowledge of local epidemiology is necessary for success. We provide a roadmap for designing, evaluating, and modeling interventions to interrupt the process of transmission that fuels a diverse array of tuberculosis epidemics worldwide.

Turning off the tap: stopping tuberculosis transmission through active case-finding and prompt effective treatment.

To halt the global tuberculosis epidemic, transmission must be stopped to prevent new infections and new cases. Identification of individuals with tuberculosis and prompt initiation of effective treatment to rapidly render them non-infectious is crucial to this task. However, in settings of high tuberculosis burden, active case-finding is often not implemented, resulting in long delays in diagnosis and treatment. A range of strategies to find cases and ensure prompt and correct treatment have been shown to be effective in high tuberculosis-burden settings. The population-level effect of targeted active case-finding on reducing tuberculosis incidence has been shown by studies and projected by mathematical modelling. The inclusion of targeted active case-finding in a comprehensive epidemic-control strategy for tuberculosis should contribute substantially to a decrease in tuberculosis incidence.

Institutional Tuberculosis Transmission. Controlled Trial of Upper Room Ultraviolet Air Disinfection: A Basis for New Dosing Guidelines.

RATIONALE: Transmission is driving the global tuberculosis epidemic, especially in congregate settings. Worldwide, natural ventilation is the most common means of air disinfection, but it is inherently unreliable and of limited use in cold climates. Upper room germicidal ultraviolet (UV) air disinfection with air mixing has been shown to be highly effective, but improved evidence-based dosing guidelines are needed. OBJECTIVES: To test the efficacy of upper room germicidal air disinfection with air mixing to reduce tuberculosis transmission under real hospital conditions, and to define the application parameters responsible as a basis for proposed new dosing guidelines. METHODS: Over an exposure period of 7 months, 90 guinea pigs breathed only untreated exhaust ward air, and another 90 guinea pigs breathed only air from the same six-bed tuberculosis ward on alternate days when upper room germicidal air disinfection was turned on throughout the ward. MEASUREMENTS AND MAIN RESULTS: The tuberculin skin test conversion rates (>6 mm) of the two chambers were compared. The hazard ratio for guinea pigs in the control chamber converting their skin test to positive was 4.9 (95% confidence interval, 2.8-8.6), with an efficacy of approximately 80%. CONCLUSIONS: Upper room germicidal UV air disinfection with air mixing was highly effective in reducing tuberculosis transmission under hospital conditions. These data support using either a total fixture output (rather than electrical or UV lamp wattage) of 15-20 mW/m(3) total room volume, or an average whole-room UV irradiance (fluence rate) of 5-7 µW/cm(2), calculated by a lighting computer-assisted design program modified for UV use.

Mycobacteria inactivation using Engineered Water Nanostructures (EWNS).

Airborne transmitted pathogens such as Mycobacterium tuberculosis (Mtb) cause serious, often fatal infectious disease with enormous global health implications. Due to their unique cell wall and slow growth, mycobacteria are among the most resilient microbial forms. Herein we evaluate the ability of an emerging, chemical-free, nanotechnology-based method to inactivate M. parafortuitum (Mtb surrogate). This method is based on the transformation of atmospheric water vapor into engineered water nano-structures (EWNS) via electrospray. We demonstrate that the EWNS can interact with and inactivate airborne mycobacteria, reducing their concentration levels significantly. Additionally, EWNS can inactivate M. parafortuitum on surfaces eight times faster than the control. The mechanism of mycobacteria inactivation was also investigated in this study. It was demonstrated that the EWNS effectively deliver the reactive oxygen species, encapsulated during the electrospray process, to the bacteria oxidizing their cell membrane resulting into inactivation. Overall, this is a method with the potential to become an effective intervention technology in the battle against airborne infections. FROM THE CLINICAL EDITOR: This study demonstrates the feasibility of mycobacterium inactivation in airborne form or on contact surfaces using electrospray activated water nano-structures. Given that the method is free of toxic chemicals, this might become an important tool in the prevention of mycobacterial infections, which are notoriously hard to treat.

Numerical Modeling of Indoor Environment with a Ceiling Fan and an Upper-Room Ultraviolet Germicidal Irradiation System.

This study proposes a numerical modeling method for the indoor environment with ceiling fans and upper-room ultraviolet germicidal irradiation (UR-UVGI) fixtures. The numerical modeling deployed steady-state Computational Fluid Dynamics (CFD) with a rotating reference frame to simulate the rotation of fan blades. CFD was validated with experimental data of velocity field and fraction of microorganism remaining at the exhaust diffuser. The fraction of microorganism remaining represented the ratio of the concentration of airborne microorganisms measured with UVGI turned on to the one measured with UVGI turned off. According to the validation results, the CFD model correctly reproduced the air movement induced by the rotation of ceiling fan. When the ambient ventilation rate was 2 ACH (air changes per hour) or 6 ACH, the CFD model accurately predicted the average vertical speeds in the section 2.44 m above the floor with the errors less than 10%, regardless of the ceiling fan's rotational direction or speed. In addition, the simulation results showed that the fraction of microorganism remaining increased with the ambient air exchange rate when the fan blew air downward with a rotational speed as high as 235 rpm, which corresponded with the experimental results. Furthermore, the simulation results accurately predicted the fraction of microorganism remaining when the ambient air exchange rate was 2 ACH. We conclude that this novel numerical model can reproduce the effects of ceiling fans and UR-UVGI fixtures on indoor environment, and should aid in the investigation of the impact of ceiling fans on UR-UVGI disinfection efficacy.

Film dosimetry for occupant exposure monitoring within Far-UVC installations.

Far-UVC radiation between 200 and 230 nm is a promising technology for reducing airborne disease transmission. Previous work with far-UVC lamps has demonstrated the efficacy of far-UVC radiation to inactivate bacteria and viruses while presenting minimal human health hazards. While far-UVC intentionally exposes the occupied space, effectively disinfecting air between occupants, installations must still ensure that occupant eye and skin exposure is within the recommended daily limits. This study examines far-UVC-sensitive films for measuring the dose received by occupants within two real-world far-UVC installations. The film is characterized for accuracy, angular response, wavelength response, and sources of uncertainty in film response, and used to obtain individual exposure doses that account for both the non-uniform irradiance and the unique motion of individuals within the space. Dosimetry results using the films, which account for the time-weighted average exposure of an occupant, ranged from 10% to 49% of the maximum calculated stationary dose based on peak irradiance measurements. Results from this study spotlight the need to incorporate time-weighted average considerations into the design and safety assessment of far-UVC installations to ultimately operate far-UVC technology with its full potential to prevent the spread of potentially fatal infectious diseases.

Accuracy of digital chest x-ray analysis with artificial intelligence software as a triage and screening tool in hospitalized patients being evaluated for tuberculosis in Lima, Peru.

Tuberculosis (TB) transmission in healthcare facilities is common in high-incidence countries. Yet, the optimal approach for identifying inpatients who may have TB is unclear. We evaluated the diagnostic accuracy of qXR (Qure.ai, India) computer-aided detection (CAD) software versions 3.0 and 4.0 (v3 and v4) as a triage and screening tool within the FAST (Find cases Actively, Separate safely, and Treat effectively) transmission control strategy. We prospectively enrolled two cohorts of patients admitted to a tertiary hospital in Lima, Peru: one group had cough or TB risk factors (triage) and the other did not report cough or TB risk factors (screening). We evaluated the sensitivity and specificity of qXR for the diagnosis of pulmonary TB using culture and Xpert as primary and secondary reference standards, including stratified analyses based on risk factors. In the triage cohort (n = 387), qXR v4 sensitivity was 0.91 (59/65, 95% CI 0.81-0.97) and specificity was 0.32 (103/322, 95% CI 0.27-0.37) using culture as reference standard. There was no difference in the area under the receiver-operating-characteristic curve (AUC) between qXR v3 and qXR v4 with either a culture or Xpert reference standard. In the screening cohort (n = 191), only one patient had a positive Xpert result, but specificity in this cohort was high (>90%). A high prevalence of radiographic lung abnormalities, most notably opacities (81%), consolidation (62%), or nodules (58%), was detected by qXR on digital CXR images from the triage cohort. qXR had high sensitivity but low specificity as a triage in hospitalized patients with cough or TB risk factors. Screening patients without cough or risk factors in this setting had a low diagnostic yield. These findings further support the need for population and setting-specific thresholds for CAD programs.

Phase I, single-dose, dose-escalating study of inhaled dry powder capreomycin: a new approach to therapy of drug-resistant tuberculosis.

Multidrug-resistant tuberculosis (MDR-TB) threatens global TB control. The lengthy treatment includes one of the injectable drugs kanamycin, amikacin, and capreomycin, usually for the first 6 months. These drugs have potentially serious toxicities, and when given as intramuscular injections, dosing can be painful. Advances in particulate drug delivery have led to the formulation of capreomycin as the first antituberculosis drug available as a microparticle dry powder for inhalation and clinical study. Delivery by aerosol may result in successful treatment with lower doses. Here we report a phase I, single-dose, dose-escalating study aimed at demonstrating safety and tolerability in healthy subjects and measuring pharmacokinetic (PK) parameters. Twenty healthy adults (n = 5 per group) were recruited to self-administer a single dose of inhaled dry powder capreomycin (25-mg, 75-mg, 150-mg, or 300-mg nominal dose) using a simple, handheld delivery device. Inhalations were well tolerated by all subjects. The most common adverse event was mild to moderate transient cough, in five subjects. There were no changes in lung function, audiometry, or laboratory parameters. Capreomycin was rapidly absorbed after inhalation. Systemic concentrations were detected in each dose group within 20 min. Peak and mean plasma concentrations of capreomycin were dose proportional. Serum concentrations exceeded 2 µg/ml (MIC for Mycobacterium tuberculosis) following the highest dose; the half-life (t1/2) was 4.8 ± 1.0 h. A novel inhaled microparticle dry powder formulation of capreomycin was well tolerated. A single 300-mg dose rapidly achieved serum drug concentrations above the MIC for Mycobacterium tuberculosis, suggesting the potential of inhaled therapy as part of an MDR-TB treatment regimen.

Surgical face masks worn by patients with multidrug-resistant tuberculosis: impact on infectivity of air on a hospital ward.

RATIONALE: Drug-resistant tuberculosis transmission in hospitals threatens staff and patient health. Surgical face masks used by patients with tuberculosis (TB) are believed to reduce transmission but have not been rigorously tested. OBJECTIVES: We sought to quantify the efficacy of surgical face masks when worn by patients with multidrug-resistant TB (MDR-TB). METHODS: Over 3 months, 17 patients with pulmonary MDR-TB occupied an MDR-TB ward in South Africa and wore face masks on alternate days. Ward air was exhausted to two identical chambers, each housing 90 pathogen-free guinea pigs that breathed ward air either when patients wore surgical face masks (intervention group) or when patients did not wear masks (control group). Efficacy was based on differences in guinea pig infections in each chamber. MEASUREMENTS AND MAIN RESULTS: Sixty-nine of 90 control guinea pigs (76.6%; 95% confidence interval [CI], 68-85%) became infected, compared with 36 of 90 intervention guinea pigs (40%; 95% CI, 31-51%), representing a 56% (95% CI, 33-70.5%) decreased risk of TB transmission when patients used masks. CONCLUSIONS: Surgical face masks on patients with MDR-TB significantly reduced transmission and offer an adjunct measure for reducing TB transmission from infectious patients.

Aspiring to zero tuberculosis deaths among southern Africa's miners: is there a way forward?

Tuberculosis notification rates among South African miners range from 4,000 to 7,000 per 100,000 people. These rates far exceed national tuberculosis notification rates for the general population. Tuberculosis mortality also surpasses deaths caused by mining accidents. These extraordinarily high rates of disease are unambiguously linked to a series of contributing factors, including exposure to silica dust, HIV infection, and poor working and living conditions. We argue that the only way to stop the transmission of this airborne disease is to treat the mine and its living quarters as one should any other congregate setting with individuals who have high rates of infection with drug-susceptible and drug-resistant strains of tuberculosis. This means implementing interventions that have been demonstrated to stop the spread of tuberculosis over the last 60 years: immediate treatment of active tuberculosis, concurrent treatment of latent tuberculosis disease to reduce the burden of active cases, and appropriate management of patients infected with HIV. Because tuberculosis is also a social disease, biomedical interventions must be coupled with improved living and working conditions. Achieving zero deaths from tuberculosis in the mines is possible if a clear commitment is made to a strategy that recognizes and ameliorates the biological and social antecedents to this epidemic.

Accuracy of digital chest x-ray analysis with artificial intelligence software as a triage and screening tool in hospitalized patients being evaluated for tuberculosis in Lima, Peru.

Introduction: Tuberculosis (TB) transmission in healthcare facilities is common in high-incidence countries. Yet, the optimal approach for identifying inpatients who may have TB is unclear. We evaluated the diagnostic accuracy of qXR (Qure.ai, India) computer-aided detection (CAD) software versions 3.0 and 4.0 (v3 and v4) as a triage and screening tool within the FAST (Find cases Actively, Separate safely, and Treat effectively) transmission control strategy. Methods: We prospectively enrolled two cohorts of patients admitted to a tertiary hospital in Lima, Peru: one group had cough or TB risk factors (triage) and the other did not report cough or TB risk factors (screening). We evaluated the sensitivity and specificity of qXR for the diagnosis of pulmonary TB using culture and Xpert as primary and secondary reference standards, including stratified analyses based on risk factors. Results: In the triage cohort (n=387), qXR v4 sensitivity was 0.91 (59/65, 95% CI 0.81-0.97) and specificity was 0.32 (103/322, 95% CI 0.27-0.37) using culture as reference standard. There was no difference in the area under the receiver-operating-characteristic curve (AUC) between qXR v3 and qXR v4 with either a culture or Xpert reference standard. In the screening cohort (n=191), only one patient had a positive Xpert result, but specificity in this cohort was high (>90%). A high prevalence of radiographic lung abnormalities, most notably opacities (81%), consolidation (62%), or nodules (58%), was detected by qXR on digital CXR images from the triage cohort. Conclusions: qXR had high sensitivity but low specificity as a triage in hospitalized patients with cough or TB risk factors. Screening patients without cough or risk factors in this setting had a low diagnostic yield. These findings further support the need for population and setting-specific thresholds for CAD programs.

A radiometry protocol for UVGI fixtures using a moving-mirror type gonioradiometer.

Ultraviolet germicidal irradiation (UVGI), 254 nm UV-C, is increasingly used as an infection control strategy to reduce the spread of airborne pathogens such as tuberculosis (TB), influenza viruses, and measles. With the appearance of multidrug-resistant TB and emerging infectious disease such as severe acute respiratory syndrome (SARS) and H1N1 influenza viruses, engineering controls using 254 nm UV-C lamps within specialized luminaires, herein designated UVGI fixtures, are being installed in high-risk settings such as homeless shelters, hospitals, jails and prisons, and schools. Studies have established that a relatively uniform spatial distribution of UV-C in the upper room can effectively cleanse the air of aerosolized pathogens. However, for planning purposes, the placement of multiple UVGI fixtures in a space, to achieve uniformity of UV-C energy distribution using currently available lighting software, is not yet practical because no industry-wide standard method exists for radiometric measurement of commercial UVGI fixtures. In this article, standard methods for photometry and reporting of general fluorescent lighting luminaire photometric data are adopted to provide UVGI fixture spatial emission distribution data in an electronic file format. The ultimate expectation of the authors is that the results will lead to a software program for fixture placement, comparable to and as easy to use as the corresponding software used for general interior lighting applications. To accomplish this goal, a radiometry measurement system is developed to obtain the radiant intensity distributions of UVGI fixtures in a three-dimensional space. This system includes a moving-mirror Type C goniometer, a mirror, a radiometer, a desktop computer, the mechanical control hardware, and the data acquisition/presentation software. Repeated measurements were made on each of three exemplary UVGI fixtures, and measurement variation did not exceed ± 2.0%.

FAST tuberculosis transmission control strategy speeds the start of tuberculosis treatment at a general hospital in Lima, Peru.

OBJECTIVE: To evaluate the effect of the FAST (Find cases Actively, Separate safely, Treat effectively) strategy on time to tuberculosis diagnosis and treatment for patients at a general hospital in a tuberculosis-endemic setting. DESIGN: Prospective cohort study with historical controls. PARTICIPANTS: Patients diagnosed with pulmonary tuberculosis during hospitalization at Hospital Nacional Hipolito Unanue in Lima, Peru. METHODS: The FAST strategy was implemented from July 24, 2016, to December 31, 2019. We compared the proportion of patients with drug susceptibility testing and tuberculosis treatment during FAST to the 6-month period prior to FAST. Times to diagnosis and tuberculosis treatment were also compared using Kaplan-Meier plots and Cox regressions. RESULTS: We analyzed 75 patients diagnosed with pulmonary tuberculosis through FAST. The historical cohort comprised 76 patients. More FAST patients underwent drug susceptibility testing (98.7% vs 57.8%; OR, 53.8; P < .001), which led to the diagnosis of drug-resistant tuberculosis in 18 (24.3%) of 74 of the prospective cohort and 4 (9%) of 44 of the historical cohort (OR, 3.2; P = .03). Overall, 55 FAST patients (73.3%) started tuberculosis treatment during hospitalization compared to 39 (51.3%) controls (OR, 2.44; P = .012). FAST reduced the time from hospital admission to the start of TB treatment (HR, 2.11; 95% CI, 1.39-3.21; P < .001). CONCLUSIONS: Using the FAST strategy improved the diagnosis of drug-resistant tuberculosis and the likelihood and speed of starting treatment among patients with pulmonary tuberculosis at a general hospital in a tuberculosis-endemic setting. In these settings, the FAST strategy should be considered to reduce tuberculosis transmission while simultaneously improving the quality of care.