Toward Self-Healing Concrete Infrastructure: Review of Experiments and Simulations across Scales.

Cement and concrete are vital materials used to construct durable habitats and infrastructure that withstand natural and human-caused disasters. Still, concrete cracking imposes enormous repair costs on societies, and excessive cement consumption for repairs contributes to climate change. Therefore, the need for more durable cementitious materials, such as those with self-healing capabilities, has become more urgent. In this review, we present the functioning mechanisms of five different strategies for implementing self-healing capability into cement based materials: (1) autogenous self-healing from ordinary portland cement and supplementary cementitious materials and geopolymers in which defects and cracks are repaired through intrinsic carbonation and crystallization; (2) autonomous self-healing by (a) biomineralization wherein bacteria within the cement produce carbonates, silicates, or phosphates to heal damage, (b) polymer-cement composites in which autonomous self-healing occurs both within the polymer and at the polymer-cement interface, and (c) fibers that inhibit crack propagation, thus allowing autogenous healing mechanisms to be more effective. In all cases, we discuss the self-healing agent and synthesize the state of knowledge on the self-healing mechanism(s). In this review article, the state of computational modeling across nano- to macroscales developed based on experimental data is presented for each self-healing approach. We conclude the review by noting that, although autogenous reactions help repair small cracks, the most fruitful opportunities lay within design strategies for additional components that can migrate into cracks and initiate chemistries that retard crack propagation and generate repair of the cement matrix.

A solitary wave-based sensor to monitor the setting of fresh concrete.

We present a proof-of-principle study about the use of a sensor for the nondestructive monitoring of strength development in hydrating concrete. The nondestructive evaluation technique is based on the propagation of highly nonlinear solitary waves (HNSWs), which are non-dispersive mechanical waves that can form and travel in highly nonlinear systems, such as one-dimensional particle chains. A built-in transducer is adopted to excite and detect the HNSWs. The waves are partially reflected at the transducer/concrete interface and partially transmitted into the concrete. The time-of-flight and the amplitude of the waves reflected at the interface are measured and analyzed with respect to the hydration time, and correlated to the initial and final set times established by the penetration test (ASTM C 403). The results show that certain features of the HNSWs change as the concrete curing progresses indicating that it has the potential of being an efficient, cost-effective tool for monitoring strengths/stiffness development.

Impact of chitin nanofibers and nanocrystals from waste shrimp shells on mechanical properties, setting time, and late-age hydration of mortar.

Every year ~ 6-8 million tonnes of shrimp, crab, and lobster shell wastes are generated, requiring costly disposal procedures. In this study, the chitin content of shrimp shell waste was oxidized to produce chitin nanocrystals (ChNC) and mechanically fibrillated to obtain chitin nanofibers (ChNF) and evaluated as additives for mortar. ChNF (0.075 wt%) and ChNC (0.05 wt%) retarded the final setting time by 50 and 30 min, likely through cement dispersion by electrostatic repulsion. ChNF (0.05 wt%) with a larger aspect ratio than ChNC resulted in the greatest improved flexural strength and fracture energy by 24% and 28%. Elastic modulus increased by up to 91% and 43% with ChNC and ChNF. Solid-state nuclear magnetic resonance (NMR) showed ChNF (0.05 wt%) enhanced calcium-silicate-hydrate structure with a 41% higher degree of polymerization, 9% more silicate chain length, and a 15% higher degree of hydration at 28 days. Based on the findings, chitin seems a viable biomass source for powerful structural nanofibers and nanocrystals for cementitious systems to divert seafood waste from landfills or the sea.