Strong Enhancement in Cobalt(II) TPMA Aqueous Hydrogen Photosynthesis through Intramolecular Proton Relay.

Photosynthetic hydrogen generation by cobalt(II) tris(2-pyridilmethyl)amine (TPMA) complexes is mainly limited by protonation kinetics and decomposition routes involving demetallation. In the present work we have explored the effects of both proton shuttles and improved rigidity on the catalytic ability of cobalt(II) TPMA complexes. Remarkably, we demonstrate that, while a small enhancement in the catalytic performance is attained in a rigid cage structure, the introduction of ammonium groups as proton transfer relays in close proximity to the cobalt center allows to reach a 4-fold increase in the quantum efficiency of H2 formation, and a surprising 22-fold gain in the maximum turnover number, at low catalyst concentration. The beneficial role of the ammonium relays in promoting faster intramolecular proton transfer to the reduced cobalt center is documented by transient absorption spectroscopy, showcasing the great relevance of tuning the catalyst periphery to achieve efficient catalysis of solar fuel formation.

A Proton-Coupled Electron Transfer Strategy to the Redox-Neutral Photocatalytic CO2 Fixation.

Herein, we report our study on the design and development of a novel photocarboxylation method. We have used an organic photoredox catalyst (PC, 4CzIPN) and differently substituted dihydropyridines (DHPs) in combination with an organic base (1,5,7-triazabicyclodec-5-ene, TBD) to access a proton-coupled electron transfer (PCET) based manifold. In depth mechanistic investigations merging experimental analysis (NMR, IR, cyclic voltammetry) and density-functional theory (DFT) calculations reveal the key activity of a H-bonding complex between the DHP and the base. The thermodynamic and kinetic benefits of the PCET mechanism allowed the implementation of a redox-neutral fixation process leading to synthetically relevant carboxylic acids (18 examples with isolated yields up to 75%) under very mild reaction conditions. Finally, diverse product manipulations were performed to demonstrate the synthetic versatility of the obtained products.

Synthesis and Characterization of Iridium(III) Complexes with Substituted Phenylimidazo(4,5-f)1,10-phenanthroline Ancillary Ligands and Their Application in LEC Devices.

In this work, we report on the synthesis and characterization of six new iridium(III) complexes of the type [Ir(C^N)2(N^N)]+ using 2-phenylpyridine (C1-3) and its fluorinated derivative (C4-6) as cyclometalating ligands (C^N) and R-phenylimidazo(4,5-f)1,10-phenanthroline (R = H, CH3, F) as the ancillary ligand (N^N). These luminescent complexes have been fully characterized through optical and electrochemical studies. In solution, the C4-6 series exhibits quantum yields (Ф) twice as high as the C1-3 series, exceeding 60% in dichloromethane and where 3MLCT/3LLCT and 3LC emissions participate in the phenomenon. These complexes were employed in the active layer of light-emitting electrochemical cells (LECs). Device performance of maximum luminance values of up to 21.7 Lx at 14.7 V were observed for the C2 complex and long lifetimes for the C1-3 series. These values are counterintuitive to the quantum yields observed in solution. Thus, we established that the rigidity of the system and the structure of the solid matrix dramatically affect the electronic properties of the complex. This research contributes to understanding the effects of the modifications in the ancillary and cyclometalating ligands, the photophysics of the complexes, and their performance in LEC devices.

Air- and Water-Stable Heteroleptic Copper (I) Complexes Bearing Bis(indazol-1-yl)methane Ligands: Synthesis, Characterisation, and Computational Studies.

A series of four novel heteroleptic Cu(I) complexes, bearing bis(1H-indazol-1-yl)methane analogues as N,N ligands and DPEPhos as the P,P ligand, were synthesised in high yields under mild conditions and characterised by spectroscopic and spectrometric techniques. In addition, the position of the carboxymethyl substituent in the complexes and its effect on the electrochemical and photophysical behaviour was evaluated. As expected, the homoleptic copper (I) complexes with the N,N ligands showed air instability. In contrast, the obtained heteroleptic complexes were air- and water-stable in solid and solution. All complexes displayed green-yellow luminescence in CH2Cl2 at room temperature due to ligand-centred (LC) phosphorescence in the case of the Cu(I) complex with an unsubstituted N,N ligand and metal-to-ligand charge transfer (MLCT) phosphorescence for the carboxymethyl-substituted complexes. Interestingly, proper substitution of the bis(1H-indazol-1-yl)methane ligand enabled the achievement of a remarkable luminescent yield (2.5%) in solution, showcasing the great potential of this novel class of copper(I) complexes for potential applications in luminescent devices and/or photocatalysis.

Rethinking Electronic Effects in Photochemical Hydrogen Evolution Using CuInS2@ZnS Quantum Dots Sensitizers.

Molecular catalysts based on coordination complexes for the generation of hydrogen via photochemical water splitting exhibit a large versatility and tunability of the catalytic properties through chemical functionalization. In the present work, we report on light-driven hydrogen production in an aqueous solution using a series of cobalt polypyridine complexes as hydrogen evolving catalysts (HECs) in combination with CuInS2@ZnS quantum dots (QDs) as sensitizers, and ascorbate as the electron donor. A peculiar trend in activity has been observed depending on the substituents present on the polypyridine ligand. This trend markedly differs from that previously recorded using [Ru(bpy)3]2+ (where bpy = 2,2'-bipyridine) as the sensitizer and can be ascribed to different kinetically limiting pathways in the photochemical reaction (viz. protonation kinetics with the ruthenium chromophore, catalyst activation via electron transfer from the QDs in the present system). Hence, this work shows how the electronic effects on light-triggered molecular catalysis are not exclusive features of the catalyst unit but depend on the whole photochemical system.

Photoinduced Electron vs. Concerted Proton Electron Transfer Pathways in SnIV (l-Tryptophanato)2 Porphyrin Conjugates.

Aromatic amino acids such as l-tyrosine and l-tryptophan are deployed in natural systems to mediate electron transfer (ET) reactions. While tyrosine oxidation is always coupled to deprotonation (proton-coupled electron-transfer, PCET), both ET-only and PCET pathways can occur in the case of the tryptophan residue. In the present work, two novel conjugates 1 and 2, based on a SnIV tetraphenylporphyrin and SnIV octaethylporphyrin, respectively, as the chromophore/electron acceptor and l-tryptophan as electron/proton donor, have been prepared and thoroughly characterized by a combination of different techniques including single crystal X-ray analysis. The photophysical investigation of 1 and 2 in CH2 Cl2 in the presence of pyrrolidine as a base shows that different quenching mechanisms are operating upon visible-light excitation of the porphyrin component, namely photoinduced electron transfer and concerted proton electron transfer (CPET), depending on the chromophore identity and spin multiplicity of the excited state. The results are compared with those previously described for metal-mediated analogues featuring SnIV porphyrin chromophores and l-tyrosine as the redox active amino acid and well illustrate the peculiar role of l-tryptophan with respect to PCET.

Photoinduced Water Oxidation in Chitosan Nanostructures Containing Covalently Linked RuII Chromophores and Encapsulated Iridium Oxide Nanoparticles.

The luminophore Ru(bpy)2 (dcbpy)2+ (bpy=2,2'-bipyridine; dcbpy=4,4'-dicarboxy-2,2'-bipyridine) is covalently linked to a chitosan polymer; crosslinking by tripolyphosphate produced Ru-decorated chitosan fibers (NS-RuCh), with a 20 : 1 ratio between chitosan repeating units and RuII chromophores. The properties of the RuII compound are unperturbed by the chitosan structure, with NS-RuCh exhibiting the typical metal-to-ligand charge-transfer (MLCT) absorption and emission bands of RuII complexes. When crosslinks are made in the presence of IrO2 nanoparticles, such species are encapsulated within the nanofibers, thus generating the IrO2 ⊂NS-RuCh system, in which both RuII photosensitizers and IrO2 water oxidation catalysts are within the nanofiber structures. NS-RuCh and IrO2 ⊂NS-RuCh have been characterized by dynamic light scattering, scanning electronic microscopy, and energy-dispersive X-ray analysis, which indicated a 2 : 1 ratio between RuII chromophores and IrO2 species. Photochemical water oxidation has been investigated by using IrO2 ⊂NS-RuCh as the chromophore/catalyst assembly and persulfate anions as the sacrificial species: photochemical water oxidation yields O2 with a quantum yield (Φ) of 0.21, definitely higher than the Φ obtained with a similar solution containing separated Ru(bpy)3 2+ and IrO2 nanoparticles (0.05) or with respect to that obtained when using NS-RuCh and "free" IrO2 nanoparticles (0.10). A fast hole-scavenging process (rate constant, 7×104  s-1 ) involving the oxidized photosensitizer and the IrO2 catalyst within the IrO2 ⊂NS-RuCh system is behind the improved photochemical quantum yield of IrO2 ⊂NS-RuCh.

Water-Assisted Concerted Proton-Electron Transfer at Co(II)-Aquo Sites in Polyoxotungstates With Photogenerated RuIII (bpy)33+ Oxidant.

The cobalt substituted polyoxotungstate [Co6 (H2 O)2 (α-B-PW9 O34 )2 (PW6 O26 )]17- (Co6) displays fast electron transfer (ET) kinetics to photogenerated RuIII (bpy)33+ , 4 to 5 orders of magnitude faster than the corresponding ET observed for cobalt oxide nanoparticles. Mechanistic evidence has been acquired indicating that: (i) the one-electron oxidation of Co6 involves Co(II) aquo or Co(II) hydroxo groups (abbreviated as Co6(II)-OH2 and Co6(II)-OH, respectively, whose speciation in aqueous solution is associated to a pKa of 7.6), and generates a Co(III)-OH moiety (Co6(III)-OH), as proven by transient absorption spectroscopy; (ii) at pH>pKa , the Co6(II)-OH→RuIII (bpy)33+ ET occurs via bimolecular kinetics, with a rate constant k close to the diffusion limit and dependent on the ionic strength of the medium, consistent with reaction between charged species; (iii) at pH

Naphthochromenones: Organic Bimodal Photocatalysts Engaging in Both Oxidative and Reductive Quenching Processes.

Twelve naphthochromenone photocatalysts (PCs) were synthesized on gram scale. They absorb across the UV/Vis range and feature an extremely wide redox window (up to 3.22 eV) that is accessible using simple visible light irradiation sources (CFL or LED). Their excited-state redox potentials, PC*/PC.- (up to 1.65 V) and PC.+ /PC* (up to -1.77 V vs. SCE), are such that these novel PCs can engage in both oxidative and reductive quenching mechanisms with strong thermodynamic requirements. The potential of these bimodal PCs was benchmarked in synthetically relevant photocatalytic processes with extreme thermodynamic requirements. Their ability to efficiently catalyze mechanistically opposite oxidative/reductive photoreactions is a unique feature of these organic photocatalysts, thus representing a decisive advance towards generality, sustainability, and cost efficiency in photocatalysis.

Photoinduced Energy- and Electron-Transfer Processes in a Side-to-Face RuII -Porphyrin/Perylene-bisimide Array.

A side-to-face array DPy-gPBI[Ru(4-tBuTPP)(CO)]2 , based on a "green" perylene bisimide chromophore sandwiched between two RuII -porphyrins, has been prepared by self-assembly. Its photophysical properties have been characterized in detail by a combination of steady-state and time-resolved techniques upon selective excitation of the two different components. Different photoinduced processes are observed as a function of the excitation wavelength. Electron transfer quenching is attained upon "red light" excitation of the perylene unit, whilst an energy transfer pathway is followed upon "green light" excitation of the metallo-porphyrin moiety. Regardless of the excitation wavelength efficient population of the triplet excited state of the perylene chromophore is achieved. The photophysical results are discussed within the framework of classical electron transfer theory and compared with those of a previously reported system.

Sn(IV) Multiporphyrin Arrays as Tunable Photoactive Systems.

A series of four arrays made of a central Sn(IV) porphyrin as scaffold axially connected, via carboxylate functions, to two free-base porphyrins has been prepared and fully characterized. Three arrays in the series feature the same free-base unit and alternative tin-porphyrin macrocycles, and one consists of a second type of free-base and one chosen metallo-porphyrin. A thorough photophysical investigation has been performed on all arrays by means of time-resolved emission and absorption techniques. Specific focus has been given at identifying how structural modifications of the free-base and tin-porphyrin partners and/or variation of the solvent polarity can effectively translate into distinct photophysical behaviors. In particular, for systems SnTPP(Fb)2 (1) and SnOEP(Fb)2 (2), an ultrafast energy transfer process from the excited Sn(IV) porphyrin to the free-base unit occurs with unitary efficiency. For derivative SnTPP(FbR)2 (3), the change of solvent from dichloromethane to toluene is accompanied by a neat change in the intercomponent quenching mechanism, from photoinduced electron transfer to energy transfer, upon excitation of the Sn(IV) porphyrin unit. Finally, for array SnTpFP(Fb)2 (4), an ultrafast electron transfer quenching of both chromophores is detected in all solvents. This work provides a general outline, accompanied by clear experimental support, on possible ways to achieve a systematic fine-tuning of the quenching mechanism (from energy to electron transfer) of Sn(IV) multiporphyrin arrays.

Light-Driven Water Oxidation with the Ir-blue Catalyst and the Ru(bpy)32+/S2O82- Cycle: Photogeneration of Active Dimers, Electron-Transfer Kinetics, and Light Synchronization for Oxygen Evolution with High Quantum Efficiency.

Light-driven water oxidation is achieved with the Ru(bpy)32+/S2O82- cycle employing the highly active Ir-blue water oxidation catalyst, namely, an IrIV,IV2(pyalc)2 µ-oxo-dimer [pyalc = 2-(2'-pyridyl)-2-propanoate]. Ir-blue is readily formed by stepwise oxidation of the monomeric Ir(III) precursor 1 by the photogenerated Ru(bpy)33+, with a quantum yield ϕ of up to 0.10. Transient absorption spectroscopy and kinetic evidence point to a stepwise mechanism, where the primary event occurs via a fast photoinduced electron transfer from 1 to Ru(bpy)33+, leading to the Ir(IV) monomer I1 (k1 ∼ 108 M-1 s-1). The competent Ir-blue catalyst is then obtained from I1 upon photooxidative loss of the Cp* ligand and dimerization. The Ir-blue catalyst is active in the Ru(bpy)32+/S2O82- light-driven water oxidation cycle, where it undergoes two fast photoinduced electron transfers to Ru(bpy)33+ [with kIr-blue = (3.00 ± 0.02) × 108 M-1 s-1 for the primary event, outperforming iridium oxide nanoparticles by ca. 2 orders of magnitude], leading to a IrV,V2 steady-state intermediate involved in O-O bond formation. The quantum yield for oxygen evolution depends on the photon flux, showing a saturation regime and reaching an impressive value of ϕ(O2) = 0.32 ± 0.01 (corresponding to a quantum efficiency of 64 ± 2%) at low irradiation intensity. This result highlights the key requirement of orchestrating the rate of the photochemical events with dark catalytic turnover.

Photoinduced Charge Separation in Porphyrin Ion Pairs.

Ion pairs between porphyrin-type compounds have been successfully employed for spectral sensitization of semiconductor surfaces and for the preparation of collective binary ionic materials for photonic and (photo)catalytic applications. The understanding of the photophysical processes occurring within ion-paired porphyrin dimers is thus of remarkable importance for the optimization and improvement of such systems. Herein the ion-pair species formed between ZnTMePyP(4+) (Zn1) or H2TMePyP(4+) (H21) and ZnTPPS(4-) (Zn2) or H2TPPS(4-) (H22) in a variety of solvent mixtures are characterized and their photophysics thoroughly investigated by time-resolved techniques. In all the systems studied, very fast and efficient photoinduced charge separation is observed, with the cationic porphyrin being reduced and the anionic one oxidized. Interestingly, despite the very short charge separation distance, the lifetime for charge recombination, depending on the energy gap, can extend into the nanosecond time domain, showing great potential for the utilization of this molecular design within energy conversion schemes.

Water oxidation catalysis upon evolution of molecular Co(III) cubanes in aqueous media.

The increasing global energy demand has stimulated great recent efforts in investigating new solutions for artificial photosynthesis, a potential source of clean and renewable solar fuel. In particular, according to the generally accepted modular approach aimed at optimising separately the different compartments of the entire process, many studies have focused on the development of catalytic systems for water oxidation to oxygen. While in recent years there have been many reports on new catalytic systems, the mechanism and the active intermediates operating the catalysis have been less investigated. Well-defined, molecular catalysts, constituted by transition metals stabilised by a suitable ligand pool, could help in solving this aspect. However, in some cases molecular species have been shown to evolve to active metal oxides that constitute the other side of this catalysis dichotomy. In this paper, we address the evolution of tetracobalt(III) cubanes, stabilised by a pyridine/acetate ligand pool, to active species that perform water oxidation to oxygen. Primary evolution of the cubane in aqueous solution is likely initiated by removal of an acetate bridge, opening the coordination sphere of the cobalt centres. This cobalt derivative, where the pristine ligands still impact on the reactivity, shows enhanced electron transfer rates to Ru(bpy)3(3+) (hole scavenging) within a photocatalytic cycle with Ru(bpy)3(2+) as the photosensitiser and S2O8(2-) as the electron sink. A more accentuated evolution occurs under continuous irradiation, where Electron Paramagnetic Resonance (EPR) spectroscopy reveals the formation of Co(ii) intermediates, likely contributing to the catalytic process that evolves oxygen. All together, these results confirm the relevant effect of molecular species, in particular in fostering the rate of the electron transfer processes involved in light activated cycles, pivotal in the design of a photoactive device.

Photoinduced intercomponent excited-state decays in a molecular dyad made of a dinuclear rhenium(I) chromophore and a fullerene electron acceptor unit.

A novel molecular dyad, 1, made of a dinuclear {[Re2(µ-X)2(CO)6(µ-pyridazine)]} component covalently-linked to a fullerene unit by a carbocyclic molecular bridge has been prepared and its redox, spectroscopic, and photophysical properties - including pump-probe transient absorption spectroscopy in the visible and near-infrared region - have been investigated, along with those of its model species. Photoinduced, intercomponent electron transfer occurs in 1 from the thermally-equilibrated, triplet metal/ligand-to-ligand charge-transfer ((3)MLLCT) state of the dinuclear rhenium(I) subunit to the fullerene acceptor, with a time constant of about 100 ps. The so-formed triplet charge-separated state recombines in a few nanoseconds by a spin-selective process yielding, rather than the ground state, the locally-excited, triplet fullerene state, which finally decays to the ground state by intersystem crossing in about 290 ns.

Photoinduced electron transfer across molecular bridges: electron- and hole-transfer superexchange pathways.

Photoinduced electron transfer plays key roles in many areas of chemistry. Superexchange is an effective model to rationalize photoinduced electron transfer, particularly when molecular bridges between donor and acceptor subunits are present. In this tutorial review we discuss, within a superexchange framework, the complex role played by the bridge, with an emphasis on differences between thermal and photoinduced electron transfer, oxidative and reductive photoinduced processes, charge separation and charge recombination. Modular bridges are also considered, with specific attention to the distance dependence of donor-acceptor electronic coupling and electron transfer rate constants. The possibility of transition, depending on the bridge energetics, from coherent donor-acceptor electron transfer to incoherent charge injection and hopping through the bridge is also discussed. Finally, conceptual analogies between bridge effects in photoinduced electron transfer and optical intervalence transfer are outlined. Selected experimental examples, instrumental to illustration of the principles, are discussed.

The use of a vanadium species as a catalyst in photoinduced water oxidation.

The first water oxidation catalyst containing only vanadium atoms as metal centers is reported. The compound is the mixed-valence [(V(IV)5V(V)1)O7(OCH3)12](-) species, 1. Photoinduced water oxidation catalyzed by 1, in the presence of Ru(bpy)3(2+) (bpy = 2,2'-bipyridine) and Na2S2O8, in acetonitrile/aqueous phosphate buffer takes place with a quantum yield of 0.20. A hole scavenging reaction between the photochemically generated Ru(bpy)3(3+) and 1 occurs with a bimolecular rate constant of 2.5 × 10(8) M(-1) s(-1). The time-resolved formation of the oxidized molecular catalyst 1(+) in bimolecular reactions is also evidenced for the first time by transient absorption spectroscopy. This result opens the way to the use of less expensive vanadium clusters as water oxidation catalysts in artificial photosynthesis schemes.

On the effect of the nature of the bridge on oxidative or reductive photoinduced electron transfer in donor-bridge-acceptor systems.

Photoinduced electron transfer is a topical issue in chemistry. In multicomponent donor-bridge-acceptor systems, electron transfer is usually discussed within the frame of superexchange theory, which takes into account electronic coupling mediated by virtual states involving bridge orbitals. However, the schematization used for superexchange in thermal electron transfer processes is not suitable to immediately understand some intriguing aspects of photoinduced charge separation and recombination processes, which are only uncovered by analyzing the virtual states involved in forward and backward excited-state electron transfer. In particular, for oxidative photoinduced electron transfer, a low-energy virtual state which cannot mediate the forward charge separation can efficiently mediate charge recombination via the hole-transfer superexchange route, whereas for reductive photoinduced electron transfer, a low-energy virtual state which cannot mediate the forward process can efficiently mediate charge recombination via electron-transfer superexchange. As a consequence, to obtain long-lived charge-separated states upon oxidative photoinduced electron transfer in donor-bridge-acceptor systems it is preferable to avoid easy-to-oxidize bridges, whereas easy-to-reduce bridges should better be avoided in reductive photoinduced charge separation. These considerations, exemplified by the analysis of some literature cases, can be useful hints for the design of long-lived charge-separated states.

A Co(II)-Ru(II) dyad relevant to light-driven water oxidation catalysis.

Artificial photosynthesis aims at efficient water splitting into hydrogen and oxygen, by exploiting solar light. As a priority requirement, this process entails the integration of suitable multi-electron catalysts with light absorbing units, where charge separation is generated in order to drive the catalytic routines. The final goal could be the transposition of such an asset into a photoelectrocatalytic cell, where the two half-reactions, proton reduction to hydrogen and water oxidation to oxygen, take place at two appropriately engineered photoelectrodes. We herein report a covalent approach to anchor a Co(II) water oxidation catalyst to a Ru(II) polypyridine photosensitizer unit; photophysical characterisation and the catalytic activity of such a dyad in a light activated cycle are reported, and implications for the development of regenerative systems are discussed.

Photocatalytic water oxidation by a mixed-valent Mn(III)3Mn(IV)O3 manganese oxo core that mimics the natural oxygen-evolving center.

The functional core of oxygenic photosynthesis is in charge of catalytic water oxidation by a multi-redox Mn(III)/Mn(IV) manifold that evolves through five electronic states (S(i), where i=0-4). The synthetic model system of this catalytic cycle and of its S0→S4 intermediates is the expected turning point for artificial photosynthesis. The tetramanganese-substituted tungstosilicate [Mn(III)3Mn(IV)O3(CH3COO)3(A-α-SiW9O34)](6-)(Mn4POM) offers an unprecedented mimicry of the natural system in its reduced S0 state; it features a hybrid organic-inorganic coordination sphere and is anchored on a polyoxotungstate. Evidence for its photosynthetic properties when combined with [Ru(bpy)3](2+) and S2O8(2-) is obtained by nanosecond laser flash photolysis; its S0→S1 transition within milliseconds and multiple-hole-accumulating properties were studied. Photocatalytic oxygen evolution is achieved in a buffered medium (pH 5) with a quantum efficiency of 1.7%.