Radiation-resistant cerium co-doped erbium-doped fibers for C- and L-band amplifiers in a high-dose gamma-radiation environment.

We experimentally demonstrate a comparative study on the radiation-resistant cerium (Ce) co-doped erbium-doped fiber amplifiers (EDFAs) exposed to a high-dose gamma-radiation environment of 1.8 kGy/h dose rate in the C and L bands. Our results show that Ce is an effective co-dopant in the aluminosilicate EDFs for suppressing radiation-induced attenuation (RIA) of more than an order of magnitude lower than the Ce-free EDF. After exposure to a high-dose gamma-radiation of up to 10 kGy, the Ce co-doped EDF still exhibits good radiation tolerance, providing 41.6 ± 2.9 dB gain and 5 ± 0.8 dB NF from 1535-1560 nm for a -25 dBm input signal. In the L-band, we report, for the first time, the radiation-resistant EDFA with the radiation-induced gain degradation (RIGD) of 3.7 dB under 2.5 kGy irradiation and 4.4 dB under 10 kGy irradiation at 1600 nm. Also, the radiation-dependent gain coefficient and gain saturation were studied in the C and L bands. A comparison of different Ce co-doped EDFs exposed to different total gamma doses reveals the radiation impact on the amplifier performance, indicating the feasibility of using Ce co-doped EDFs for space-based optical communications, requiring robust radiation stability.

Gamma Radiation-Induced Effects over an Optical Fiber Laser: Towards New Sensing Applications.

In the present work, the effect of gamma radiation on the performance of different types of erbium-doped fibers (EDFs) when they are used in a fiber ring cavity (FRC) configuration is studied. Several pieces of commercial EDF are gamma-ray irradiated with different doses to evaluate the output power variations over time. The influence of different doses, from 150 Gy to 1000 Gy, over the output power level measurement and their amplified spontaneous emission (ASE) are experimentally evaluated both in the C and L bands. By using an FRC configuration we can detect the presence of gamma radiation. We can also estimate the irradiation doses applied to EDFs by measuring the slope of the short-term emission power.

Real-time analysis of arc-induced Long Period Gratings under gamma irradiation.

In this paper, we present a comparative experimental and theoretical study on gamma radiation sensitivity of Long Period Gratings (LPGs), fabricated by electric arc discharge technique, as monitored in three single mode optical fibers supplied by different manufacturers. A real-time measurement of LPGs' wavelength shift was performed until a total dose of 35 kGy was reached, with average dose rate of 0.18 kGy/h, the irradiation being done at room temperature. In one case, a maximum radiation sensitivity of 1.34 nm/kGy was recorded for doses up to 0.5 kGy. Moreover, by combining experimental results with numerical simulations, it was found that changes occurred in the core refractive index of the irradiated optical fibers up to 2.5 ∙ 10-5. The increase of the core thermo-optic coefficient up to 1.5 ∙ 10-8/°C was observed as well.

Thermal desorption/gas chromatography/mass spectrometry approach for characterization of the volatile fraction from amber specimens: a possibility of tracking geological origins.

Research on the chemical composition of fossil resins has evolved during the last decades as a multidisciplinary field and is strongly oriented toward the correlation with their geological and botanical origin. Various extraction procedures and chromatographic techniques have been used together for identifying the volatile compounds contained in the fossil resin matrix. Hyphenation between thermal desorption (TD), gas chromatography (GC) and mass spectrometry detection (MS) has been chosen to investigate the volatile compounds fraction from ambers with a focus on Romanite (Romanian amber) and Baltic amber species. A data analysis procedure was developed for the main purpose of fingerprinting ambers based on the MS identity of the peaks generated by the volatile fraction, together with their relative percentual area within the chromatogram. Chromatographic data analysis was based entirely on Automated Mass Spectral Deconvolution &Identification System (AMDIS) software to produce deconvoluted mass spectra which were used to build-up a mixed mass spectra and relative retention scale library. Multivariate data analysis was further applied on AMDIS results with successful discrimination between Romanite and Baltic ambers. A special trial was conducted to generate pyrolysis "like" macromolecular structure breakdown to volatile compounds by gamma irradiation with a high absorbed dose of 500 kGy. Contrary to our expectations the volatile fraction fingerprints were not modified after irradiation experiments. A complementary non-destructive new approach by ESR spectroscopy was also proposed for discriminating between Romanite and Baltic ambers.