RESUMO
Introduction: The 12-item Vietnamese smell identification test (VSIT) has been developed to evaluate the olfactory function of the Vietnamese population. This study aimed to investigate the normative value of the VSIT in different age groups and sexes. Methods: This cross-sectional study was conducted at Ho Chi Minh University Medical Center, Vietnam. All participants were evaluated for odor identification ability using the VSIT. We included healthy participants aged 18 years or older with no history of olfactory disturbances. Results: A total of 391 healthy volunteers were recruited with a mean age of 45.80 years (SD: 17.62; range: 18-86; female: 63.4 %). The tenth percentile of scores on the 0-12 VSIT scale was 8.3 in participants aged 18-29 years, 9.0 in 30-39 years, 8.0 in 40-49 years, 7.8 in 50-59 years, 7.9 in 60-69 years and 6.0 in over 70 years. Young adults (18-39 years old) had better olfactory identification ability than older adults (over 50 years), p < 0.001. There was a significant main effect of sex on VSIT score (p = 0.02), suggesting that females outperformed males. Sensitivity to 8 odors were negatively correlated with age: lemon, garlic, banana, coffee, mango, guava, apple and watermelon (p < 0.05 in all cases) whereas four odors were age-independent including orange, fish sauce, soy sauce, and fish. Conclusion: Normative data provide guidance for assessing individual olfactory function. However, there were significant sex and age effects on olfactory identification scores on the VSIT. Therefore, future studies should be conducted to better adjust for those confounders mentioned above.
RESUMO
BACKGROUND: Correct olfactory identification requires familiarity with the odor stimuli and is culturally dependent. Existing smell identification tests (SIT) are not culturally specific and may not be reliable in detecting hyposmia in all populations. This study aimed to develop a smell identification test suitable for Vietnamese patients (VSIT). METHODS: The study included 4 phases: 1) survey-based evaluation of the familiarity of 68 odors to identify 18 odors for subsequent testing (N = 1050); 2) smell identification test of 18 odors in healthy patients (N = 50) to determine which 12 should be included in the VSIT; 3) comparison of VSIT scores on 12 odors in patients with hyposmia (N = 60; Brief smell identification test (BSIT) score <8 and those with normosmia (N = 120; BSIT score ≥8) to establish the validity of the newly developed test; and 4) retest of the VSIT in 60 normosmic patients from phase 3 (N = 60) to determine test-retest reliability. RESULTS: As expected, the mean (SD) VSIT score was significantly higher in the healthy participants than in the hyposmic patients [10.28 (1.34) vs 4.57 (1.76); P < 0.001]. Using a cut-off score at 8, the sensitivity and specificity of the instrument in detecting hyposmia were 93.3% and 97.5% respectively. The test-retest reliability using the intra-class correlation coefficient was at 0.72 (P < 0.001). CONCLUSION: The Vietnamese Smell Identification Test (VSIT) demonstrated favorable validity and reliability and will allow for assessment of olfactory function in Vietnamese patients.
Assuntos
Transtornos do Olfato , Olfato , Humanos , Transtornos do Olfato/diagnóstico , Anosmia , Reprodutibilidade dos Testes , População do Sudeste Asiático , OdorantesRESUMO
Quorum sensing is the process by which microbial cells sense and respond to the co-presence of others in their surrounding, through the detection of their autoinducers associated with gene expression regulation and thereby controlling many physiological processes, such as biofilm formation and/or bioluminescence, etc. In Vibrio bacteria, where quorum sensing is relatively well understood with three commonly known autoinducers (HAI-1, AI-2 and CAI-1), both intra-species and inter-species cell-cell communications occur but no inter-Vibrio-species quorum sensing inhibition has been reported. In this study, by screening bacterial isolated from soil and mud samples in a northern province in Vietnam, we discovered a strain that reduced more than 75% of the bioluminescence of a Vibrio harveyi, with evidence showing that such an inhibition might be associated with quorum sensing inhibition. The strain, designated as XTS1.2.9, was identified to be a Vibrio parahaemolyticus bacterium based on its morphological, physiological, biochemical and phylogenetic characteristics. We also tested XTS1.2.9 for its bioluminescence inhibition against different mutants lacking different quorum sensing autoinducers by using plate assays. The results showed that XTS1.2.9 inhibited the bioluminescence of the mutants having sensor 1, especially the one detecting CAI-1, and lacking sensor for AI-2; while it did not inhibit the mutants having only sensor for AI-2 and lacking sensor 1. Therefore, we propose an intra-genus quorum sensing inhibition mechanism involving CAI-1 to explain for such interactions between Vibrio parahaemolyticus and Vibrio harveyi. This phenomenon is reported for the first time and may have certain scientific and application implications.
Assuntos
Vibrio parahaemolyticus , Vibrio , Proteínas de Bactérias/genética , Proteínas de Bactérias/metabolismo , Regulação Bacteriana da Expressão Gênica , Filogenia , Percepção de Quorum/fisiologia , Vibrio/genética , Vibrio parahaemolyticus/metabolismo , VietnãRESUMO
In this study, we investigated the potential of using sediment bioelectrochemical systems (SBESs) for in situ treatment of the water and sediment in brackish aquaculture ponds polluted with uneaten feed. An SBES integrated into a laboratory-scale tank simulating a brackish aquaculture pond was established. This test tank and the control (not containing the SBES) were fed with shrimp feed in a scheme that mimics a situation where 50% of feed is uneaten. After the SBES was inoculated with microbial sources from actual shrimp pond sediments, electricity generation was well observed from the first experimental week, indicating successful enrichment of electrochemically active bacteria in the test tank sediment. The electricity generation became steady after 3 weeks of operation, with an average current density of 2.3 mA/m2 anode surface and an average power density of 0.05 mW/m2 anode surface. The SBES removed 20-30% more COD of the tank water, compared to the control. After 1 year, the SBES also reduced the amount of sediment in the tank by 40% and thus could remove approximately 40% more COD and approximately 52% more nitrogen from the sediment, compared to the control. Insignificant amounts of nitrite and nitrate were detected, suggesting complete removal of nitrogen by the system. PCR-DGGE-based analyses revealed the dominant presence of Methylophilus rhizosphaerae, Desulfatitalea tepidiphila and Thiothrix eikelboomii, which have not been found in bioelectrochemical systems before, in the bacterial community in the sediment of the SBES-containing tank. The results of this research demonstrate the potential application of SBESs in helping to reduce water pollution threats, fish and shrimp disease risks, and thus farmers' losses.
Assuntos
Aquicultura , Microbiota , Lagoas/microbiologia , Eliminação de Resíduos Líquidos/métodos , Poluentes da Água/metabolismo , Ração Animal , Animais , Bactérias/classificação , Bactérias/genética , Bactérias/isolamento & purificação , Biodegradação Ambiental , Fontes de Energia Bioelétrica , Análise da Demanda Biológica de Oxigênio , Eletricidade , Sedimentos Geológicos/química , Sedimentos Geológicos/microbiologia , Microbiota/genética , Nitrogênio/análise , Lagoas/químicaRESUMO
Sediment bioelectrochemical systems (SBESs) can be integrated into brackish aquaculture ponds for in-situ bioremediation of the pond water and sediment. Such an in-situ system offers advantages including reduced treatment cost, reusability and simple handling. In order to realize such an application potential of the SBES, in this laboratory-scale study we investigated the effect of several controllable and uncontrollable operational factors on the in-situ bioremediation performance of a tank model of a brackish aquaculture pond, into which a SBES was integrated, in comparison with a natural degradation control model. The performance was evaluated in terms of electricity generation by the SBES, Chemical oxygen demand (COD) removal and nitrogen removal of both the tank water and the tank sediment. Real-life conditions of the operational parameters were also experimented to understand the most close-to-practice responses of the system to their changes. Predictable effects of controllable parameters including external resistance and electrode spacing, similar to those reported previously for the BESs, were shown by the results but exceptions were observed. Accordingly, while increasing the electrode spacing reduced the current densities but generally improved COD and nitrogen removal, increasing the external resistance could result in decreased COD removal but also increased nitrogen removal and decreased current densities. However, maximum electricity generation and COD removal efficiency difference of the SBES (versus the control) could be reached with an external resistance of 100 Ω, not with the lowest one of 10 Ω. The effects of uncontrollable parameters such as ambient temperature, salinity and pH of the pond (tank) water were rather unpredictable. Temperatures higher than 35°C seemed to have more accelaration effect on natural degradation than on bioelectrochemical processes. Changing salinity seriously changed the electricity generation but did not clearly affect the bioremediation performance of the SBES, although at 2.5% salinity the SBES displayed a significantly more efficient removal of nitrogen in the water, compared to the control. Variation of pH to practically extreme levels (5.5 and 8.8) led to increased electricity generations but poorer performances of the SBES (vs. the control) in removing COD and nitrogen. Altogether, the results suggest some distinct responses of the SBES under brackish conditions and imply that COD removal and nitrogen removal in the system are not completely linked to bioelectrochemical processes but electrochemically enriched bacteria can still perform nonbioelectrochemical COD and nitrogen removals more efficiently than natural ones. The results confirm the application potential of the SBES in brackish aquaculture bioremediation and help propose efficient practices to warrant the success of such application in real-life scenarios.
Assuntos
Aquicultura , Sedimentos Geológicos/microbiologia , Lagoas/microbiologia , Eliminação de Resíduos Líquidos/métodos , Poluentes da Água/isolamento & purificação , Bactérias/metabolismo , Biodegradação Ambiental , Fontes de Energia Bioelétrica , Análise da Demanda Biológica de Oxigênio , Eletricidade , Eletrodos , Sedimentos Geológicos/química , Concentração de Íons de Hidrogênio , Nitrogênio/isolamento & purificação , Nitrogênio/metabolismo , Lagoas/química , Salinidade , Temperatura , Poluentes da Água/metabolismoRESUMO
Iron-oxidizing bacterial consortia can be enriched in microbial fuel cells (MFCs) operated with ferrous iron as the sole electron donor. In this study, we investigated the possibility of using such lithotrophic iron-oxidizing MFC (LIO-MFC) systems as biosensors to monitor iron and manganese in water samples. When operated with anolytes containing only ferrous iron as the sole electron donor, the experimented LIO-MFCs generated electrical currents in response to the presence of Fe(2+) in the anolytes. For the concentrations of Fe(2+) in the range of 3-20 mM, a linear correlation between the current and the concentration of Fe(2+) could be achieved (r(2) = 0.98). The LIO-MFCs also responded to the presence of Mn(2+) in the anolytes but only when the Mn(2+) concentration was less than 3 mM. The presence of other metal ions such as Ni(2+) or Pb(2+) in the anolytes reduced the Fe(2+)-associated electricity generation of the LIO-MFCs at various levels. Organic compounds, when present at a non-excessive level together with Fe(2+) in the anolytes, did not affect the generation of electricity, although the compounds might serve as alternative electron donors for the anode bacteria. The performance of the LIO-MFCs was also affected to different degrees by operational parameters, including surrounding temperature, pH of the sample, buffer strength and external resistance. The results proved the potential of LIO-MFCs as biosensors sensing Fe(2+) in water samples with a significant specificity. However, the operation of the system should be in compliance with an optimal procedure to ensure reliable performance.