Stepwise Functionalization of a Pillar[5]arene-Containing [2]Rotaxane with Pentafluorophenyl Ester Stoppers.

Detailed investigations into the stepwise bis-functionalization of a pillar[5]arene-containing rotaxane building block have been carried out. Upon a first stopper exchange, the pillar[5]arene moiety of the mono-acylated product is preferentially located close to its reactive pentafluorophenyl ester stopper, thus limiting the accessibility to the reactive carbonyl group by the nucleophilic reagents. Selective mono-functionalization is thus very efficient. Introduction of a second stopper is then possible to generate dissymmetrical rotaxanes with different amide stoppers. Moreover, when dethreading is possible upon the second acylation, the pillar[5]arene plays the role of a protecting group allowing the synthesis of dissymmetrical axles that are particularly difficult to prepare under statistical conditions. Finally, detailed conformation analysis of the rotaxanes revealed that the position of the pillar[5]arene moiety on its axle subunit is mainly governed by polar interactions in nonpolar organic solvents, whereas solvophobic effects play a major role in polar solvents.

Stepwise Functionalization of a Pillar[5]arene-Containing [2]Rotaxane with Pentafluorophenyl Ester Stoppers.

Invited for the cover of this issue are the group of Iwona and Jean-François Nierengarten from the University of Strasbourg (LIMA, UMR 7042, CNRS) and collaborators from the University of Carthage. The image depicts a sky of umbrellas floating in the air to illustrate the protective effect allowing the efficient mono-acylation of a symmetrical rotaxane building block with two pentafluorophenyl ester stoppers. Read the full text of the article at 10.1002/chem.2023003501.

Solution and Solvent-Free Stopper Exchange Reactions for the Preparation of Pillar[5]arene-Containing [2] and [3]Rotaxanes.

Invited for the cover of this issue are the group of Iwona and Jean-François Nierengarten from the University of Strasbourg (LIMA, UMR 7042, CNRS) and collaborators from the University of Carthage and the IPHC (University of Strasbourg and CNRS, UMR 7178). The image illustrates the fast motions of a pillar[5]arene subunit along the axle of a rotaxane, reminiscent of those of a guitarist's hand along the neck allowing him to use random parts of a scale with certain sweet spots when improvising a solo. Read the full text of the article at 10.1002/chem.202304131.

Solution and Solvent-Free Stopper Exchange Reactions for the Preparation of Pillar[5]arene-containing [2] and [3]Rotaxanes.

Diamine reagents have been used to functionalize a [2]rotaxane building block bearing an activated pentafluorophenyl ester stopper. Upon a first acylation, an intermediate host-guest complex with a terminal amine function is obtained. Dissociation of the intermediate occurs in solution and acylation of the released axle generates a [2]rotaxane with an elongated axle subunit. In contrast, the corresponding [3]rotaxane can be obtained if the reaction conditions are appropriate to stabilize the inclusion complex of the mono-amine intermediate and the pillar[5]arene. This is the case when the stopper exchange is performed under mechanochemical solvent-free conditions. Alternatively, if the newly introduced terminal amide group is large enough to prevent the dissociation, the second acylation provides exclusively a [3]rotaxane. On the other hand, detailed conformational analysis has been also carried out by variable temperature NMR investigations. A complete understanding of the shuttling motions of the pillar[5]arene subunit along the axles of the rotaxanes reported therein has been achieved with the help of density functional theory calculations.

Stabilization of Luminescent Mononuclear Three-Coordinate CuI Complexes by Two Distinct Cavity-Shaped Diphosphanes Obtained from a Single α-Cyclodextrin Precursor.

Slightly different reaction conditions afforded two distinct cavity-shaped cis-chelating diphosphanes from the same starting materials, namely diphenyl(2-phosphanylphenyl)phosphane and an α-cyclodextrin-derived dimesylate. Thanks to their metal-confining properties, the two diphosphanes form only mononuclear [CuX(PP)] complexes (X=Cl, Br, or I) with the tricoordinated metal ion located just above the center of the cavity. The two series of CuI complexes display markedly different luminescence properties that are both influenced by the electronic properties of the ligand and the unique steric environment provided by the cyclodextrin (CD) cavity. The excited state lifetimes of all complexes are significantly longer than those of the cavity-free analogues suggesting peculiar electronic effects that affect radiative deactivation constants. The overall picture stemming from absorption and emission data suggests close-lying charge-transfer (MLCT, XLCT) and triplet ligand-centered (LC) excited states.

Stable Luminescent [Cu(NN)(PP)]+ Complexes Incorporating a ß-Cyclodextrin-Based Diphosphane Ligand with Metal-Confining Properties.

A ß-cyclodextrin-based diphosphane with metal-confining properties was efficiently synthesized thanks to an unprecedented Smiles-like rearrangement of diphenyl-(2-phosphanylphenyl)phosphane in the presence of excess n-BuLi. The cis-chelating bidentate ligand is capable of forming very stable heteroleptic [Cu(NN)(PP)]+ complexes in which a metal-bound diimine ligand (bpy, phen, or mmp) is located within the cyclodextrin cavity. As a result of ligand encapsulation, flattening of the metal tetrahedral geometry in the excited state is disfavored, thereby resulting in enhanced luminescent properties.

Pentafluorophenyl Esters as Exchangeable Stoppers for the Construction of Photoactive [2]Rotaxanes.

Stable pillar[5]arene-containing [2]rotaxane building blocks with pentafluorophenyl ester stoppers have been efficiently prepared on a multi-gram scale. Reaction of these building blocks with various nucleophiles gave access to a wide range of [2]rotaxanes with amide, ester or thioester stoppers in good to excellent yields. The rotaxane structure is fully preserved during these chemical transformations. Actually, the addition-elimination mechanism at work during these transformations totally prevents the unthreading of the axle moiety of the mechanically interlocked system. The stopper exchange reactions were optimized both in solution and under mechanochemical solvent-free conditions. While amide formation is more efficient in solution, the solvent-free conditions are more powerful for the transesterification reactions. Starting from a fullerene-functionalized pillar[5]arene derivative, this new strategy gave easy access to a photoactive [2]rotaxane incorporating a C60 moiety and two Bodipy stoppers. Despite the absence of covalent connectivity between the Bodipy and the fullerene moieties in this photoactive molecular device, efficient through-space excited state interactions have been evidenced in this rotaxane.

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells.

Invited for the cover of this issue are the groups of S. Seki (Kyoto), G. Reginato (Sesto Fiorentino), J.-F. Nierengarten (Strasbourg), A. Abate (Berlin) and J. L. Delgado (San Sebastian). The image depicts an artistic view of a dendrimer-like hole transporting material at work in a perovskite solar cell. Read the full text of the article at 10.1002/chem.202101110.

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells.

Multi-branched molecules have recently demonstrated interesting behaviour as charge-transporting materials within the fields of perovskite solar cells (PSCs). For this reason, extended triarylamine dendrons have been grafted onto a pillar[5]arene core to generate dendrimer-like compounds, which have been used as hole-transporting materials (HTMs) for PSCs. The performances of the solar cells containing these novel compounds have been extensively investigated. Interestingly, a positive dendritic effect has been evidenced as the hole transporting properties are improved when going from the first to the second-generation compound. The stability of the devices based on the best performing pillar[5]arene material has been also evaluated in a high-throughput ageing setup for 500 h at high temperature. When compared to reference devices prepared from spiro-OMeTAD, the behaviour is similar. An analysis of the economic advantages arising from the use of the pillar[5]arene-based material revealed however that our pillar[5]arene-based material is cheaper than the reference.

Grafting Dendrons onto Pillar[5]Arene Scaffolds.

With their ten peripheral substituents, pillar[5]arenes are attractive compact scaffolds for the construction of nanomaterials with a controlled number of functional groups distributed around the macrocyclic core. This review paper is focused on the functionalization of pillar[5]arene derivatives with small dendrons to generate dendrimer-like nanomaterials and bioactive compounds. Examples include non-viral gene vectors, bioactive glycoclusters, and liquid-crystalline materials.

A Journey of a Thousand Miles Begins with a Single Step.

After 1000 issues of the journal, our Editorial Board Chairs share their views on the past, present and future of Chemistry-A European Journal. The success of the journal is associated with the creativity and the work of its authors. Like all great journals there is increasing involvement of Asia and the Americas, too, in addition to the ongoing strengths of European chemistry. While the Journal tends to emphasize the fundamental research of the chemistry being published, some of the cutting-edge contributions also have an applied nature that underpins the industrial innovation of society.

Topological and Steric Constraints to Stabilize Heteroleptic Copper(I) Complexes Combining Phenanthroline Ligands and Phosphines.

Heteroleptic copper(I) complexes combining phenanthroline derivatives (NN) and chelating bisphosphine ligands (PP) are an important class of luminescent materials for various applications. Although thermodynamically stable, [Cu(NN)(PP)]+ derivatives are also kinetically unstable. As a result, a dynamic ligand-exchange reaction is often observed in solution, leading to a dynamic mixture of heteroleptic and homoleptic complexes. To prevent the formation of the homoleptic species, macrocyclic phenanthroline ligands have been used for the preparation of [Cu(NN)(PP)]+ pseudorotaxanes. The topological constraint resulting from the macrocyclic structure of the NN ligand drives the thermodynamic equilibrium towards the exclusive formation of the heteroleptic complex as long as the macrocycle is large and flexible enough to allow for the threading of the PP ligand. Conversely, when the threading is prevented by steric constraints, unprecedented copper(I) complexes with a trigonal coordination geometry are obtained. These results are summarized in the present concept article.

Heteroleptic Copper(I) Pseudorotaxanes Incorporating Macrocyclic Phenanthroline Ligands of Different Sizes.

A series of copper(I) pseudorotaxanes has been prepared from bis[2-(diphenylphosphino)phenyl] ether (POP) and macrocyclic phenanthroline ligands with different ring sizes (m30, m37, and m42). Variable-temperature studies carried out on the resulting [Cu(mXX)(POP)]+ (mXX = m30, m37, and m42) derivatives have revealed a dynamic conformational equilibrium due to the folding of the macrocyclic ligand. The absorption and luminescence properties of the pseudorotaxanes have been investigated in CH2Cl2. They exhibit metal-to-ligand charge-transfer emission with photoluminescence quantum yields (PLQYs) in the range 20-30%. The smallest system [Cu(m30)(POP)]+ shows minimal differences in spectral shape and position compared to its analogues, suggesting a slightly distorted coordination environment. PLQY is substantially enhanced in poly(methyl methacrylate) films (∼40-45%). The study of emission spectra and excited-state lifetimes in powder samples as a function of temperature (78-338 K) reveals thermally activated delayed fluorescence, with sizable differences in the singlet-triplet energy gap compared to the reference compound [Cu(dmp)(POP)]+ (dmp = 2,9-dimethyl-1,10-phenanthroline) and within the pseudorotaxane series. The system with the largest ring ([Cu(m42)(POP)]+) has been tested as emissive material in OLEDs and affords bright green devices with higher luminance and greater stability compared to [Cu(dmp)(POP)]+, which lacks the macrocyclic ring. This highlights the importance of structural factors in the stability of electroluminescent devices based on Cu(I) materials.

Preparation of Pillar[5]arene-Based [2]Rotaxanes by a Stopper-Exchange Strategy.

A pillar[5]arene-containing rotaxane building block bearing exchangeable stoppers has been prepared in multigram scale quantities with high yields from the reaction of 2,4-dinitrophenol (DNP) with the inclusion complex resulting from the association of dodecanedioyl chloride with 1,4-diethoxypillar[5]arene. Stopper exchange reactions have been achieved by treatment of the resulting DNP diester with various amines through an addition-elimination mechanism preventing the unthreading of the axle component during the reaction and thus preserving the [2]rotaxane structures. The resulting diamide [2]rotaxane derivatives have thus been obtained in good to excellent yields. Importantly, [2]rotaxanes difficult or impossible to prepare by direct introduction of the two stoppers in a single synthetic step are now easily available.

A Rotaxane Scaffold for the Construction of Multiporphyrinic Light-Harvesting Devices.

A sophisticated photoactive molecular device has been prepared by combining recent concepts for the preparation of multifunctional nanomolecules (click chemistry on multifunctional scaffolds) with supramolecular chemistry (self-assembly to prepare rotaxanes). Specifically, a clickable [2]rotaxane scaffold incorporating a free-base porphyrin stopper has been prepared and functionalized with ten peripheral Zn(II)-porphyrin moieties. Electrochemical investigations of the final compound revealed a peculiar behavior resulting from the intramolecular coordination of the Zn(II) porphyrin moieties to 1,2,3-triazole units. Finally, steady state investigations of the compound combining Zn(II) and free-base porphyrin moieties have shown that this compound is a light-harvesting device capable of channeling the light energy from the peripheral Zn(II)-porphyrin subunits to the core by singlet-singlet energy transfer.

A Rotaxane Scaffold Bearing Multiple Redox Centers: Synthesis, Surface Modification and Electrochemical Properties.

A rotaxane scaffold incorporating two dithiolane anchoring units for the modification of gold surfaces has been functionalized with multiple copies of a redox unit, namely ferrocene. Surface modification has been first assessed at the single molecule level by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) imaging, while tip enhanced Raman spectroscopy (TERS) provided the local vibrational signature of the ferrocenyl subunits of the rotaxanes grafted onto the gold surface. Finally, oxidation of the redox moieties within a rotaxane scaffold grafted onto gold microelectrodes has been investigated by ultrafast cyclic voltammetry. Intramolecular electron hopping is indeed extremely fast in this system. Moreover, the kinetics of charge injection depends on the molecular coverage due to the influence of intermolecular contacts on molecular motions.

Giant Glycosidase Inhibitors: First- and Second-Generation Fullerodendrimers with a Dense Iminosugar Shell.

The multivalent effect in glycosidase inhibition is a new topic in glycoscience that has emerged a few years ago, with the discovery of neoglycoclusters displaying strong binding enhancements over the corresponding monovalent inhibitor. Iminosugar-fullerene conjugates with high valencies have been prepared from iminosugar-terminated dendrons and a clickable fullerene hexa-adduct scaffold. The simultaneous grafting of twelve dendrons allows for a very fast dendritic growth thus limiting the number of synthetic steps required to prepare compounds with a high number of peripheral units. The grafting of first- and second-generation dendrons provided fullerodendrimers surrounded by 36 and 108 peripheral iminosugars, respectively. Inhibition studies have been carried out with a panel of glycosidases. In the particular case of Jack bean α-mannosidase, the 108-valent nanoconstruct displays inhibition in the nanomolar range and an additional binding enhancement of one order of magnitude when compared to the 36-valent analogues.

Twisted N-Doped Nano-Graphenes: Synthesis, Characterization, and Resolution.

Two diastereoisomeric N-doped nanographene derivatives have been efficiently prepared in two synthetic steps starting from an ethynylated hexaazatriphenylene building block. The first derivative adopts a D3 -symmetrical propeller-shaped structure with three equivalent nanographene foils. The structure of the second diastereoisomer is C2 -symmetrical and differs from the first one by the way two peripheral nanographene foils overlap. Owing to their intertwined structures, the two N-doped nanographenes are soluble in organic solvents and could be characterized by a combination of several analytical tools. Resolution of the D3 -symmetrical derivative has been achieved and CD measurements revealed extremely strong Cotton effects.

Efficient Photoinduced Energy and Electron Transfer in ZnII -Porphyrin/Fullerene Dyads with Interchromophoric Distances up to 2.6†nm and No Wire-like Connectivity.

The dyads 1-3 made of an alkynylated ZnII -porphyrin and a bis-methanofullerene derivative connected through a copper-catalyzed azide-alkyne cycloaddition have been synthesized. The porphyrin and fullerene chromophores are separated through a bridge made of a bismethanofullerene tether linked to different spacers conjugated to the porphyrin moiety [i.e., m-phenylene (1), p-phenylene (2), di-p-phenylene-ethynylene (3)]. Compounds 1-3 exhibit relatively rigid structures with an interchromophoric separation of 1.7, 2.0, and 2.6 nm, respectively, and no face-to-face or direct through-bond conjugation. The photophysical properties of compounds 1-3 have been investigated in toluene and benzonitrile with steady-state and time-resolved techniques as well as model calculations on the Förster energy transfer. Excited-state interchromophoric electronic interactions are observed with a distinct solvent and distance dependence. The latter effect is evidenced in benzonitrile, where compounds 1 and 2 exhibit a photoinduced electron transfer in the Marcus-inverted region, with charge-separated (CS) states living for 0.44 and 0.59 µs, respectively, whereas compound 3 only undergoes energy transfer, as in apolar toluene. The quantum yield of the charge separation (φCS ) of compounds 1 and 2 in benzonitrile is ≥0.75. It is therefore demonstrated that photoinduced energy and electron transfers in porphyrin-fullerene systems with long interchromophoric distances may efficiently occur also when the bridge does not provide a wire-like conjugation and proceed through the triplet states of the chromophoric moieties.

Coordination-Driven Folding in Multi-ZnII -Porphyrin Arrays Constructed on a Pillar[5]arene Scaffold.

Pillar[5]arene derivatives bearing peripheral porphyrin subunits have been efficiently prepared from a deca-azide pillar[5]arene building block (17) and ZnII -porphyrin derivatives bearing a terminal alkyne function (9 and 16). For the resulting deca-ZnII -porphyrin arrays (18 and 20), variable temperature NMR studies revealed an intramolecular complexation of the peripheral ZnII -porphyrin moieties by 1,2,3-triazole subunits. As a result, the molecules adopt a folded conformation. This was further confirmed by UV/Vis spectroscopy and cyclic voltammetry. In addition, we have also demonstrated that the coordination-driven unfolding of 18 and 20 can be controlled by an external chemical stimulus. Specifically, addition of an imidazole derivative (22) to solution of 18 or 20 breaks the intramolecular coordination at the origin of the folding. The resulting molecular motions triggered by the addition of the imidazole ligand mimic the blooming of a flower.