Direct Evidence of Reversible SnO2-Li Reactions in Carbon Nanospaces.

We present herein that carbon nanospaces are the key reaction space to improve the reversibility of the reaction of SnO2 with Li-ions for lithium-ion batteries, demonstrated by both ex situ and in situ observations using high-resolution scanning transmission electron microscopy with electron energy loss spectroscopy. Conversion-type electrode materials, such as SnO2, undergo large volume changes and phase separation during the charge-discharge process, which lead to degradation in the battery performance. By confining the SnO2-Li reaction within carbon nanopores, the battery performance is improved. However, the exact phase changes of SnO2 in the nanospaces are unclear. By directly observing the electrodes during the charge-discharge process, the carbon walls are capable of preventing the expansion of SnO2 particles and minimizing the conversion-induced phase separation of Sn and Li2O on the sub-nanometer scale. Thus, nanoconfinement structures can effectively improve the reversibility performance of conversion-type electrode materials.

SnO2-Embedded Nanoporous Carbon Electrode with a Reaction-Buffer Space for Stable All-Solid-State Li Ion Batteries.

The conventional approach for fabricating all-solid-state batteries has required a highly dense layer of electrode and electrolyte. Their close contact interface is not suitable for alloy- or conversion-based active materials because their large volume change in lithiation/delithiation reactions causes a collapse of the contact interface or reaction limitations under mechanical constriction. In this study, we propose that a SnO2-embedded porous carbon electrode shows high cyclability and high capacity even at high constraint pressure owing to the nanopores, which work as a buffer space for the large volume change accompanied with SnO2-Sn conversion reaction and Sn-Li alloying-dealloying reaction. A detailed investigation between structural parameters of the electrode material and charge-discharge properties revealed Li ion conduction in carbon nanopores from a solid electrolyte located outside as well as the optimal conditions to yield high performance. SnO2-loading (75 wt %) in carbon nanopores, which provides the buffer space corresponding to the inevitable volume expansion by full lithiation, brought out an excellent performance at room temperature superior to that in an organic liquid electrolyte system: a high capacity of 1023 mAh/g-SnO2 at 50 mA/g, high capacity retention of 97% at 300th cycle at 300 mA/g, and high rate capability with over 75% capacity retention at 1000 against 50 mA/g, whose values are also superior to the system using the organic liquid electrolyte.

High capacity and stable all-solid-state Li ion battery using SnO2-embedded nanoporous carbon.

Extensive research efforts are devoted to development of high performance all-solid-state lithium ion batteries owing to their potential in not only improving safety but also achieving high stability and high capacity. However, conventional approaches based on a fabrication of highly dense electrode and solid electrolyte layers and their close contact interface is not always applicable to high capacity alloy- and/or conversion-based active materials such as SnO2 accompanied with large volume change in charging-discharging. The present work demonstrates that SnO2-embedded nanoporous carbons without solid electrolyte inside the nanopores are a promising candidate for high capacity and stable anode material of all-solid-state battery, in which the volume change reactions are restricted in the nanopores to keep the constant electrode volume. A prototype all-solid-state full cell consisting of the SnO2-based anode and a LiNi1/3Co1/3Mn1/3O2-based cathode shows a good performance of 2040 Wh/kg at 268.6 W/kg based on the anode material weight.