Effects of surface activation on the structural and catalytic properties of ruthenium nanoparticles supported on mesoporous silica.

Using colloid-based methods to prepare supported catalytic metallic nanoparticles (NPs) often faces the challenge of removing the stabilizer used during synthesis and activating the catalyst without modifying the particles or the support. We explored three surface activation protocols (thermal oxidation at 150 °C, thermal reduction at 350 °C, and argon-protected calcination at 650 °C) to activate ruthenium NPs supported on mesoporous silica (MSU-F), and assessed their effects on the structural and catalytic properties of the catalysts, and their activity by the aqueous phase hydrogenation of pyruvic acid. The NPs were synthesized by polyol reduction using poly-N-vinyl-2-pyrrolidone (PVP) as a stabilizer, and supported on MSU-F by sonication-assisted deposition. The NPs maintained their original morphology on the support during activation. Ar-protected calcination was the most efficient of the three for completely removing PVP from particle surfaces, and provided the highest degree of particle crystallinity and a metal dispersion comparable to commercial Ru/SiO2. Its catalytic performance was significantly higher than the other two protocols, although all three thermally activated catalysts achieved higher activity than the commercial catalyst at the same Ru loading. Post-reaction analysis also showed that the supported catalyst activated at 650 °C retained its morphology during the reaction, which is an important requirement for recyclability.

Influence of lysophospholipid hydrolysis by the catalytic domain of neuropathy target esterase on the fluidity of bilayer lipid membranes.

Neuropathy target esterase (NTE) is an integral membrane protein localized in the endoplasmic reticulum in neurons. Irreversible inhibition of NTE by certain organophosphorus compounds produces a paralysis known as organophosphorus compound-induced delayed neuropathy. In vitro, NTE has phospholipase/lysophospholipase activity that hydrolyses exogenously added single-chain lysophospholipids in preference to dual-chain phospholipids, and NTE mutations have been associated with motor neuron disease. NTE's physiological role is not well understood, although recent studies suggest that it may control the cytotoxic accumulation of lysophospholipids in membranes. We used the NTE catalytic domain (NEST) to hydrolyze palmitoyl-2-hydroxy-sn-glycero-3-phosphocholine (p-lysoPC) to palmitic acid in bilayer membranes comprising 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and the fluorophore 1-oleoyl-2-[12-[(7-nitro-2-1,3-benzoxadiazol-4-yl)amino]dodecanoyl]-sn-glycero-3-phosphocholine (NBD-PC). Translational diffusion coefficients (D(L)) in supported bilayer membranes were measured by fluorescence recovery after pattern photobleaching (FRAPP). The average D(L) for DOPC/p-lysoPC membranes without NEST was 2.44 microm(2)s(-1)+/-0.09; the D(L) for DOPC/p-lysoPC membranes containing NEST and diisopropylphosphorofluoridate, an inhibitor, was nearly identical at 2.45+/-0.08. By contrast, the D(L) for membranes comprising NEST, DOPC, and p-lysoPC was 2.28+/-0.07, significantly different from the system with inhibited NEST, due to NEST hydrolysis. Likewise, a system without NEST containing the amount of palmitic acid that would have been produced by NEST hydrolysis of p-lysoPC was identical at 2.26+/-0.06. These results indicate that NTE's catalytic activity can alter membrane fluidity.

In situ immobilization of palladium nanoparticles in microfluidic reactors and assessment of their catalytic activity.

We report on the synthesis and characterization of catalytic palladium nanoparticles (Pd NPs) and their immobilization in microfluidic reactors fabricated from polydimethylsiloxane (PDMS). The Pd NPs were stabilized with D-biotin or 3-aminopropyltrimethoxysilane (APTMS) to promote immobilization inside the microfluidic reactors. The NPs were homogeneous with narrow size distributions between 2 and 4 nm, and were characterized by transmission electron microscopy (TEM), selected-area electron diffraction (SAED), and x-ray diffraction (XRD). Biotinylated Pd NPs were immobilized on APTMS-modified PDMS and glass surfaces through the formation of covalent amide bonds between activated biotin and surface amino groups. By contrast, APTMS-stabilized Pd NPs were immobilized directly onto PDMS and glass surfaces rich in hydroxyl groups. Fourier transform infrared spectroscopy (FT-IR) and x-ray photoelectron spectroscopy (XPS) results showed successful attachment of both types of Pd NPs on glass and PDMS surfaces. Both types of Pd NPs were then immobilized in situ in sealed PDMS microfluidic reactors after similar surface modification. The effectiveness of immobilization in the microfluidic reactors was evaluated by hydrogenation of 6-bromo-1-hexene at room temperature and one atmosphere of hydrogen pressure. An average first-run conversion of 85% and selectivity of 100% were achieved in approximately 18 min of reaction time. Control experiments showed that no hydrogenation occurred in the absence of the nanocatalysts. This system has the potential to provide a reliable tool for efficient and high throughput evaluation of catalytic NPs, along with assessment of intrinsic kinetics.

Arrays of lipid bilayers and liposomes on patterned polyelectrolyte templates.

This paper presents novel methods to produce arrays of lipid bilayers and liposomes on patterned polyelectrolyte multilayers. We created the arrays by exposing patterns of poly(dimethyldiallylammonium chloride) (PDAC), polyethylene glycol (m-dPEG) acid, and poly(allylamine hydrochloride) (PAH) on polyelectrolyte multilayers (PEMs) to liposomes of various compositions. The resulting interfaces were characterized by total internal reflection fluorescence microscopy (TIRFM), fluorescence recovery after pattern photobleaching (FRAPP), quartz crystal microbalance (QCM), and fluorescence microscopy. Liposomes composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dioleoyl-sn-glycero-3-phosphate (monosodium salt) (DOPA) were found to preferentially adsorb on PDAC and PAH surfaces. On the other hand, liposome adsorption on sulfonated poly(styrene) (SPS) surfaces was minimal, due to electrostatic repulsion between the negatively charged liposomes and the SPS-coated surface. Surfaces coated with m-dPEG acid were also found to resist liposome adsorption. We exploited these results to create arrays of lipid bilayers by exposing PDAC, PAH and m-dPEG patterned substrates to DOPA/DOPC vesicles of various compositions. The patterned substrates were created by stamping PDAC (or PAH) on SPS-topped multilayers, and m-dPEG acid on PDAC-topped multilayers, respectively. This technique can be used to produce functional biomimetic interfaces for potential applications in biosensors and biocatalysis, for creating arrays that could be used for high-throughput screening of compounds that interact with cell membranes, and for probing, and possibly controlling, interactions between living cells and synthetic membranes.

Comparison of liposomes formed by sonication and extrusion: rotational and translational diffusion of an embedded chromophore.

We report on the physical and optical characterization of liposomes formed by extrusion and sonication, two widely used methods for vesicle preparation. We also address the issue of whether the properties of bilayers formed from liposomes prepared by the two techniques differ at the molecular and mesoscopic levels. We used the phospholipid 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), with and without cholesterol, to form liposomes, incorporating 1-oleoyl-2-[12-[(7-nitro-2-1,3-benzoxadiazol-4-yl)amino]dodecanoyl]-sn-glycero-3-phosphocholine (18:1-12:0 NBD-PC) as an optical probe of dynamics. We measured the physical morphology of liposomes by transmission electron microscopy (TEM) and dynamic light scattering (DLS), and the rotational and translational diffusion of 18:1-12:0 NBD-PC by time correlated single photon counting (TCSPC) and fluorescence recovery after pattern photobleaching (FRAPP), respectively. We find that, despite apparent differences in average size and size distribution, both methods of preparation produced liposomes that exhibit the same molecular scale environment. The translational diffusion behavior of the tethered chromophore in planar bilayer lipid membranes formed from the two types of liposomes also yielded similar results.

Tethered lipid bilayers on electrolessly deposited gold for bioelectronic applications.

This paper presents the formation of a novel biomimetic interface consisting of an electrolessly deposited gold film overlaid with a tethered bilayer lipid membrane (tBLM). Self-assembly of colloidal gold particles was used to create an electrolessly deposited gold film on a glass slide. The properties of the film were characterized using field-effect scanning electron microscopy, energy dispersive spectroscopy, and atomic force microscopy. Bilayer lipid membranes were then tethered to the gold film by first depositing an inner molecular leaflet using a mixture of 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[3-(2-pyridyldithio)propionate], 1,2-di-O-phytanyl-sn-glycero-3-phosphoethanolamine (DPGP), and cystamine in ethanol onto a freshly prepared electrolessly deposited gold surface. The outer leaflet was then formed by the fusion of liposomes made from DPGP or 1,2-dioleoyl-sn-glycero-3-phosphocholine on the inner leaflet. To provide functionality, two membrane biomolecules were also incorporated into the tBLMs: the ionophore valinomycin and a segment of neuropathy target esterase containing the esterase domain. Electrochemical impedance spectroscopy, UV/visible spectroscopy, and fluorescence recovery after pattern photobleaching were used to characterize the resulting biomimetic interfaces and confirm the biomolecule activity of the membrane. Microcontact printing was used to form arrays of electrolessly deposited gold patterns on glass slides. Subsequent deposition of lipids yielded arrays of tBLMs. This approach can be extended to form functional biomimetic interfaces on a wide range of inexpensive materials, including plastics. Potential applications include high-throughput screening of drugs and chemicals that interact with cell membranes and for probing, and possibly controlling, interactions between living cells and synthetic membranes. In addition, the gold electrode provides the possibility of electrochemical applications, including biocatalysis, bio-fuel cells, and biosensors.

Adsorption and interaction of fibronectin and human serum albumin at the liquid-liquid interface.

The goal of this work was to investigate the dynamics of human plasma fibronectin (HFN) at the oil-water interface and to characterize its interactions with human serum albumin (HSA) by total internal reflection fluorescence microscopy (TIRFM). Among key results, we observed that fibronectin adsorption at the oil-water interface is rapid and essentially irreversible, even over short time scales. This may be due to the highly flexible nature of the protein, which allows its various domains to quickly attain energetically favorable conformations. On the other hand, HSA adsorption at the oil-water interface is relatively reversible at short times, and the protein is readily displaced by fibronectin even after HSA has been adsorbed at the interface for as long as 2 h. At longer adsorption times, HSA is able to more effectively resist complete displacement by fibronectin, although we observed significant fibronectin adsorption even under those conditions. Displacement of adsorbed fibronectin by HSA was negligible under all conditions. Fibronectin also adsorbs preferentially from a mixture of HFN and HSA, even when the concentration of HSA is substantially higher. This study is relevant to such emerging research thrusts as the development of biomimetic interfaces for a variety of applications, where there is a clear need for better understanding of the effects of interfacial competition, adsorption time scales, and extent of adsorption irreversibility on interfacial dynamics.