Development of Organic/Inorganic Hybrid Materials for Fully Degradable Reactive Oxygen Species-Releasing Stents for Antirestenosis.

Despite innovative advances in stent technology, restenosis remains a crucial issue for the clinical implantation of stents. Reactive oxygen species (ROS) are known to potentially accelerate re-endothelialization and lower the risk of restenosis by selectively controlling endothelial cells and smooth muscle cells. Recently, several studies have been conducted to develop biodegradable polymeric stents. As biodegradable polymers are not electrically conductive, double metallic layers are required to constitute a galvanic couple for ROS generation. Here, we report a new biodegradable hybrid material composed of a biodegradable polymer substrate and double anodic/cathodic metallic layers for enhancing re-endothelialization and suppressing restenosis. Pure Zn and Mg films (3 µm thick) were deposited onto poly-l-lactic acid (PLLA) substrates by DC magnetron sputtering, and a long-term immersion test using biodegradable hybrid materials was performed in phosphate-buffered solution (PBS) for 2 weeks. The concentrations of superoxide anions and hydrogen peroxide generated by the corrosion of biodegradable metallic films were monitored every 1 or 2 days. Both superoxide anions and hydrogen peroxide were seamlessly generated even after the complete consumption of the anodic Mg layer. It was confirmed that the superoxide anions and hydrogen peroxide were formed not only by the galvanic corrosion between the anode and cathode layers but also by the corrosion of a single Mg or Zn layer. The corrosion products of the Mg and Zn films in PBS were phosphate, oxide, or chloride of the biodegradable metals. Thus, it is concluded that ROS generation by the corrosion of PLLA-based hybrid materials can be sustained until the exhaustion of the cathode metal layer.

Interface Engineering of Fully Metallic Stents Enabling Controllable H2O2 Generation for Antirestenosis.

Despite significant advances in the design of metallic materials for bare metal stents (BMSs), restenosis induced by the accumulation of smooth muscle cells (SMCs) has been a major constraint on improving the clinical efficacy of stent implantation. Here, a new strategy for avoiding this issue by utilizing hydrogen peroxide (H2O2) generated by the galvanic coupling of nitinol (NiTi) stents and biodegradable magnesium-zinc (Mg-Zn) alloys is reported. The amount of H2O2 released is carefully optimized via the biodegradability engineering of the alloys and by controlling the immersion time to selectively inhibit the proliferation and function of SMCs without harming vascular endothelial cells. Based on demonstrations of its unique capabilities, a fully metallic stent with antirestenotic functionality was successfully fabricated by depositing Mg layers onto commercialized NiTi stents. The introduction of surface engineering to yield a patterned Mg coating ensured the maintenance of a stable interface between Mg and NiTi during the process of NiTi stent expansion, showing high feasibility for clinical application. This new concept of an inert metal/degradable metal hybrid system based on galvanic metal coupling, biodegradability engineering, and surface patterning can serve as a novel way to construct functional and stable BMSs for preventing restenosis.

Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy.

There has been a tremendous amount of research in the past decade to optimize the mechanical properties and degradation behavior of the biodegradable Mg alloy for orthopedic implant. Despite the feasibility of degrading implant, the lack of fundamental understanding about biocompatibility and underlying bone formation mechanism is currently limiting the use in clinical applications. Herein, we report the result of long-term clinical study and systematic investigation of bone formation mechanism of the biodegradable Mg-5wt%Ca-1wt%Zn alloy implant through simultaneous observation of changes in element composition and crystallinity within degrading interface at hierarchical levels. Controlled degradation of Mg-5wt%Ca-1wt%Zn alloy results in the formation of biomimicking calcification matrix at the degrading interface to initiate the bone formation process. This process facilitates early bone healing and allows the complete replacement of biodegradable Mg implant by the new bone within 1 y of implantation, as demonstrated in 53 cases of successful long-term clinical study.

Magnesium Corrosion Triggered Spontaneous Generation of H2O2 on Oxidized Titanium for Promoting Angiogenesis.

Although the use of reactive oxygen species (ROS) has been extensively studied, current systems employ external stimuli such as light or electrical energy to produce ROS, which limits their practical usage. In this report, biocompatible metals were used to construct a novel electrochemical system that can spontaneously generate H2O2 without any external light or voltage. The corrosion of Mg transfers electrons to Au-decorated oxidized Ti in an energetically favorable process, and the spontaneous generation of H2O2 in an oxygen reduction reaction was revealed to occur at titanium by combined spectroscopic and electrochemical analyses. The controlled release of H2O2 noticeably enhanced in vitro angiogenesis even in the absence of growth factors. Finally, a new titanium implant prototype was developed by Mg incorporation, and its potential for promoting angiogenesis was demonstrated.

Development of an integrin αv-based universal marker, capable of both prediction and direction of stem cell fate.

Integrin-mediated focal adhesion (FA) and subsequent cytoskeletal reorganization influence cell morphology, migration, and ultimately cell fate. Previous studies have used various patterned surfaces with defined macroscopic cell shapes or nanoscopic FA distributions to explore how different substrates affect the fate of human bone marrow mesenchymal stem cells (BMSCs). However, there is currently no straightforward relationship between BMSC cell fates induced by patterned surfaces and FA distribution substrates. In this study, we conducted single-cell image analysis of integrin αv-mediated FA and cell morphological features of BMSCs during biochemically induced differentiation. This enabled the identification of distinct FA features that can discriminate between osteogenic and adipogenic differentiation, demonstrating that integrin αv-mediated focal adhesion (FA) can be used as a non-invasive biomarker for real time observation. Based on these results, we developed an organized microscale fibronectin (FN) patterned surface where the fate of BMSC could be precisely manipulated by these FA features. Notably, even in the absence of any biochemical inducers, such as those contained in the differentiation medium, BMSCs cultured on these FN patterned surfaces exhibited upregulation of differentiation markers comparable to BMSCs cultured using conventional differentiation methods. Therefore, the present study reveals the application of these FA features as universal markers not only for predicting differentiation status, but also for regulating cell fate by precisely controlling the FA features with a new cell culture platform. STATEMENT OF SIGNIFICANCE: Although the effects of material physiochemical properties on cell morphology and subsequent cell fate decisions have been extensively studied, a simple yet intuitive correlation between cellular features and differentiation remains unavailable. We present a single cell image-based strategy for predicting and directing stem cell fate. By using a specific integrin isoform, integrin αv, we identified distinct geometric features that can be used as a marker for discriminating between osteogenic and adipogenic differentiation in real-time. From these data, new cell culture platforms capable of regulating cell fate by precisely controlling FA features and cell area can be developed.

Improving hydroxyapatite coating ability on biodegradable metal through laser-induced hydrothermal coating in liquid precursor: Application in orthopedic implants.

During the past decade, there has been extensive research toward the possibility of exploring magnesium and its alloys as biocompatible and biodegradable materials for implantable applications. Its practical medical application, however, has been limited to specific areas owing to rapid corrosion in the initial stage and the consequent complications. Surface coatings can significantly reduce the initial corrosion of Mg alloys, and several studies have been carried out to improve the adhesion strength of the coating to the surfaces of the alloys. The composition of hydroxyapatite (HAp) is very similar to that of bone tissue; it is one of the most commonly used coating materials for bone-related implants owing to favorable osseointegration post-implantation. In this study, HAp was coated on Mg using nanosecond laser coating, combining the advantages of chemical and physical treatments. Photothermal heat generated in the liquid precursor by the laser improved the adhesion of the coating through the precipitation and growth of HAp at the localized nanosecond laser focal area and increased the corrosion resistance and cell adhesion of Mg. The physical, crystallographic, and chemical bondings were analyzed to explore the mechanism through which the surface adhesion between Mg and the HAp coating layer increased. The applicability of the coating to Mg screws used for clinical devices and improvement in its corrosion property were confirmed. The liquid environment-based laser surface coating technique offers a simple and quick process that does not require any chemical ligands, and therefore, overcomes a potential obstacle in its clinical use.

Selective Cell-Cell Adhesion Regulation via Cyclic Mechanical Deformation Induced by Ultrafast Nanovibrations.

The adoption of dynamic mechanomodulation to regulate cellular behavior is an alternative to the use of chemical drugs, allowing spatiotemporal control. However, cell-selective targeting of mechanical stimuli is challenging due to the lack of strategies with which to convert macroscopic mechanical movements to different cellular responses. Here, we designed a nanoscale vibrating surface that controls cell behavior via selective repetitive cell deformation based on a poroelastic cell model. The vibrating indentations induce repetitive water redistribution in the cells with water redistribution rates faster than the vibrating rate; however, in the opposite case, cells perceive the vibrations as a one-time stimulus. The selective regulation of cell-cell adhesion through adjusting the frequency of nanovibration was demonstrated by suppression of cadherin expression in smooth muscle cells (fast water redistribution rate) with no change in vascular endothelial cells (slow water redistribution rate). This technique may provide a new strategy for cell-type-specific mechanical stimulation.

Delivery of nitric oxide-releasing silica nanoparticles for in vivo revascularization and functional recovery after acute peripheral nerve crush injury.

Nitric oxide (NO) has been shown to promote revascularization and nerve regeneration after peripheral nerve injury. However, in vivo application of NO remains challenging due to the lack of stable carrier materials capable of storing large amounts of NO molecules and releasing them on a clinically meaningful time scale. Recently, a silica nanoparticle system capable of reversible NO storage and release at a controlled and sustained rate was introduced. In this study, NO-releasing silica nanoparticles (NO-SNs) were delivered to the peripheral nerves in rats after acute crush injury, mixed with natural hydrogel, to ensure the effective application of NO to the lesion. Microangiography using a polymer dye and immunohistochemical staining for the detection of CD34 (a marker for revascularization) results showed that NO-releasing silica nanoparticles increased revascularization at the crush site of the sciatic nerve. The sciatic functional index revealed that there was a significant improvement in sciatic nerve function in NO-treated animals. Histological and anatomical analyses showed that the number of myelinated axons in the crushed sciatic nerve and wet muscle weight excised from NO-treated rats were increased. Moreover, muscle function recovery was improved in rats treated with NO-SNs. Taken together, our results suggest that NO delivered to the injured sciatic nerve triggers enhanced revascularization at the lesion in the early phase after crushing injury, thereby promoting axonal regeneration and improving functional recovery.

Biomimetic hydrogel blanket for conserving and recovering intrinsic cell properties.

BACKGROUND: Cells in the human body experience different growth environments and conditions, such as compressive pressure and oxygen concentrations, depending on the type and location of the tissue. Thus, a culture device that emulates the environment inside the body is required to study cells outside the body. METHODS: A blanket-type cell culture device (Direct Contact Pressing: DCP) was fabricated with an alginate-based hydrogel. Changes in cell morphology due to DCP pressure were observed using a phase contrast microscope. The changes in the oxygen permeability and pressure according to the hydrogel concentration of DCP were analyzed. To compare the effects of DCP with normal or artificial hypoxic cultures, cells were divided based on the culture technique: normal culture, DCP culture device, and artificial hypoxic environment. Changes in phenotype, genes, and glycosaminoglycan amounts according to each environment were evaluated. Based on this, the mechanism of each culture environment on the intrinsic properties of conserving chondrocytes was suggested. RESULTS: Chondrocytes live under pressure from the surrounding collagen tissue and experience a hypoxic environment because collagen inhibits oxygen permeability. By culturing the chondrocytes in a DCP environment, the capability of DCP to produce a low-oxygen and physical pressure environment was verified. When human primary chondrocytes, which require pressure and a low-oxygen environment during culture to maintain their innate properties, were cultured using the hydrogel blanket, the original shapes and properties of the chondrocytes were maintained. The intrinsic properties could be recovered even in aged cells that had lost their original cell properties. CONCLUSIONS: A DCP culture method using a biomimetic hydrogel blanket provides cells with an adjustable physical pressure and a low-oxygen environment. Through this technique, we could maintain the original cellular phenotypes and intrinsic properties of human primary chondrocytes. The results of this study can be applied to other cells that require special pressure and oxygen concentration control to maintain their intrinsic properties. Additionally, this technique has the potential to be applied to the re-differentiation of cells that have lost their original properties.

Regulation of cell locomotion by nanosecond-laser-induced hydroxyapatite patterning.

Hydroxyapatite, an essential mineral in human bones composed mainly of calcium and phosphorus, is widely used to coat bone graft and implant surfaces for enhanced biocompatibility and bone formation. For a strong implant-bone bond, the bone-forming cells must not only adhere to the implant surface but also move to the surface requiring bone formation. However, strong adhesion tends to inhibit cell migration on the surface of hydroxyapatite. Herein, a cell migration highway pattern that can promote cell migration was prepared using a nanosecond laser on hydroxyapatite coating. The developed surface promoted bone-forming cell movement compared with the unpatterned hydroxyapatite surface, and the cell adhesion and movement speed could be controlled by adjusting the pattern width. Live-cell microscopy, cell tracking, and serum protein analysis revealed the fundamental principle of this phenomenon. These findings are applicable to hydroxyapatite-coated biomaterials and can be implemented easily by laser patterning without complicated processes. The cell migration highway can promote and control cell movement while maintaining the existing advantages of hydroxyapatite coatings. Furthermore, it can be applied to the surface treatment of not only implant materials directly bonded to bone but also various implanted biomaterials implanted that require cell movement control.

On/off switchable physical stimuli regulate the future direction of adherent cellular fate.

The utilization of cell-manipulating techniques reveals information about biological behaviors suited to address a wide range of questions in the field of life sciences. Here, we introduced an on/off switchable physical stimuli technique that offers precise stimuli for reversible cell patterning to allow regulation of the future direction of adherent cellular behavior by leveraging enzymatically degradable alginate hydrogels with defined chemistry and topography. As a proof of concept, targeted muscle cells adherent to TCP exhibited a reshaped structure when the hydrogel-based physical stimuli were applied. This simple tool offers easy manipulation of adherent cells to reshape their morphology and to influence future direction depending on the characteristics of the hydrogel without limitations of time and space. The findings from this study are broadly applicable to investigations into the relationships between cells and physiological extracellular matrix environments as well as has potential to open new horizons for regenerative medicine with manipulated cells.

Biodegradable Metallic Glass for Stretchable Transient Electronics.

Biodegradable electronics are disposable green devices whose constituents decompose into harmless byproducts, leaving no residual waste and minimally invasive medical implants requiring no removal surgery. Stretchable and flexible form factors are essential in biointegrated electronic applications for conformal integration with soft and expandable skins, tissues, and organs. Here a fully biodegradable MgZnCa metallic glass (MG) film is proposed for intrinsically stretchable electrodes with a high yield limit exploiting the advantages of amorphous phases with no crystalline defects. The irregular dissolution behavior of this amorphous alloy regarding electrical conductivity and morphology is investigated in aqueous solutions with different ion species. The MgZnCa MG nanofilm shows high elastic strain (≈2.6% in the nano-tensile test) and offers enhanced stretchability (≈115% when combined with serpentine geometry). The fatigue resistance in repeatable stretching also improves owing to the wide range of the elastic strain limit. Electronic components including the capacitor, inductor, diode, and transistor using the MgZnCa MG electrode support its integrability to transient electronic devices. The biodegradable triboelectric nanogenerator of MgZnCa MG operates stably over 50 000 cycles and its fatigue resistant applications in mechanical energy harvesting are verified. In vitro cell toxicity and in vivo inflammation tests demonstrate the biocompatibility in biointegrated use.

Femtosecond laser induced nano-textured micropatterning to regulate cell functions on implanted biomaterials.

Posterior capsular opacification (PCO) is the most common complication of cataract surgery. PCO is due to the proliferation, migration, and epithelial-to-mesenchymal transition of the residual lens epithelial cells (LECs) within the lens capsule. As surface topography influences cellular response, we investigated the effect of modulating the dimensions of periodic nano-textured patterns on the surface of an intraocular lens material to regulate lens epithelial cell functions such as cell adhesion, migration, orientation, and proliferation. Patterned poly(HEMA) samples were prepared by a femtosecond laser microfabrication, and the behaviors of human B-3 LECs were observed on groove/ridge patterns with widths varying from 5 to 40 µm. In the presence of ridge and groove patterns, the adherent cells elongated along the direction of the patterns, and f-actin of the cells was spread to a lesser extent on the nano-textured groove surfaces. Both single and collective cell migrations were significantly inhibited in the perpendicular direction of the patterns on the nano-textured micro-patterned samples. We also fabricated the patterns on the curved surface of a commercially available intraocular lens for in vivo evaluation. In vivo results showed that a patterned IOL could help suppress the progression of PCO by inhibiting cell migration from the edge to the center of the IOL. Our reports demonstrate that nano- and microscale topographical patterns on a biomaterial surface can regulate cellular behavior when it is implanted into animals.

Tailoring H2O2 generation kinetics with magnesium alloys for efficient disinfection on titanium surface.

A new antibacterial strategy for Ti has been developed without the use of any external antibacterial agents and surface treatments. By combining Mg alloys with Ti, H2O2, which is an oxidizing agent that kills bacteria, was spontaneously generated near the surface of Ti. Importantly, the H2O2 formation kinetics can be precisely controlled by tailoring the degradation rates of Mg alloys connected to Ti. Through microstructural and electrochemical modification of Mg with alloying elements (Ca, Zn), the degradation rates of Mg alloys were controlled, and the H2O2 release kinetics was accelerated when the degradation rate of Mg alloys increased. With the introduction of an in vivo assessment platform comprised of Escherichia coli (E. coli) and transgenic zebrafish embryos, we are able to design optimized antibacterial systems (Ti-Mg and Ti-Mg-3wt% Zn) that can selectively eradicate E. coli while not harming the survival rate, development, and biological functions of zebrafish embryos. We envision that our antibacterial strategy based on utilization of sacrificial Mg alloys could broaden the current palette of antibacterial platforms for metals.

Effect of spatial arrangement and structure of hierarchically patterned fibrous scaffolds generated by a femtosecond laser on cardiomyoblast behavior.

Biological responses on biomaterials occur either on their surface or at the interface. Therefore, surface characterization is an essential step in the fabrication of ideal biomaterials for achieving effective control of the interaction between the material surface and the biological environment. Herein, we applied femtosecond laser ablation on electrospun fibrous scaffolds to fabricate various hierarchical patterns with a focus on the alignment of cells. We investigated the simultaneously stimulated response of cardiomyoblasts based on multiple topographical cues, including scales, oriented directions, and spatial arrangements, in the fibrous scaffolds. Our results demonstrated a synergistic effect on cell behaviors of one or more structural arrangements in a homogeneous orientation, whereas antagonistic effects were observed for cells arranged on a surface with heterogeneous directions. Taken together, these results indicate that our hierarchically patterned fibrous scaffolds may be useful tools for understanding the cellular behavior on fibrous scaffolds used to mimic an extracellular matrix-like environment. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1732-1742, 2018.

A new corrosion-inhibiting strategy for biodegradable magnesium: reduced nicotinamide adenine dinucleotide (NADH).

Utilization of biodegradable metals in biomedical fields is emerging because it avoids high-risk and uneconomic secondary surgeries for removing implantable devices. Mg and its alloys are considered optimum materials for biodegradable implantable devices because of their high biocompatibility; however, their excessive and uncontrollable biodegradation is a difficult challenge to overcome. Here, we present a novel method of inhibiting Mg biodegradation by utilizing reduced nicotinamide adenine dinucleotide (NADH), an endogenous cofactor present in all living cells. Incorporating NADH significantly increases Mg corrosion resistance by promoting the formation of thick and dense protective layers. The unique mechanism by which NADH enables corrosion inhibition was discovered by combined microscopic and spectroscopic analyses. NADH is initially self-adsorbed onto the surface of Mg oxide layers, preventing Cl- ions from dissolving Mg oxides, and later recruits Ca2+ ions to form stable Ca-P protective layers. Furthermore, stability of NADH as a corrosion inhibitor of Mg under physiological conditions were confirmed using cell tests. Moreover, excellent cell adhesion and viability to Mg treated with NADH shows the feasibility of introduction of NADH to Mg-based implantable system. Our strategy using NADH suggests an interesting new way of delaying the degradation of Mg and demonstrates potential roles for biomolecules in the engineering the biodegradability of metals.

Molecular dynamics simulation of cytotoxicity of graphene nanosheets to blood-coagulation protein.

Graphene is a nanomaterial that is widely used in electronics, biomedicine, and drug-delivery systems. Although it has many industrial applications, the cytotoxicity of graphene has not been sufficiently studied. In this study, the authors used molecular dynamics simulation to investigate how a graphene nanosheet affects a blood-coagulation protein, namely, a tissue factor/FVIIa binary complex bound to a lipid bilayer membrane, in a 4:1 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l-serine lipid bilayer mixture. Based on the results, the authors suggest a mechanism for the cytotoxicity of graphene nanosheets to blood-coagulation protein at the molecular level.

Erratum: Direct and accurate measurement of size dependent wetting behaviors for sessile water droplets.

This corrects the article DOI: 10.1038/srep18150.