RESUMO
As a biodegradable and biocompatible protein derived from collagen, gelatin has been extensively exploited as a fundamental component of biological scaffolds and drug delivery systems for precise medicine. The easily engineered gelatin holds great promise in formulating various delivery systems to protect and enhance the efficacy of drugs for improving the safety and effectiveness of numerous pharmaceuticals. The remarkable biocompatibility and adjustable mechanical properties of gelatin permit the construction of active 3D scaffolds to accelerate the regeneration of injured tissues and organs. In this Review, we delve into diverse strategies for fabricating and functionalizing gelatin-based structures, which are applicable to gene and drug delivery as well as tissue engineering. We emphasized the advantages of various gelatin derivatives, including methacryloyl gelatin, polyethylene glycol-modified gelatin, thiolated gelatin, and alendronate-modified gelatin. These derivatives exhibit excellent physicochemical and biological properties, allowing the fabrication of tailor-made structures for biomedical applications. Additionally, we explored the latest developments in the modulation of their physicochemical properties by combining additive materials and manufacturing platforms, outlining the design of multifunctional gelatin-based micro-, nano-, and macrostructures. While discussing the current limitations, we also addressed the challenges that need to be overcome for clinical translation, including high manufacturing costs, limited application scenarios, and potential immunogenicity. This Review provides insight into how the structural and chemical engineering of gelatin can be leveraged to pave the way for significant advancements in biomedical applications and the improvement of patient outcomes.
Assuntos
Gelatina , Alicerces Teciduais , Humanos , Gelatina/química , Alicerces Teciduais/química , Engenharia Tecidual , Colágeno , Polietilenoglicóis , Materiais Biocompatíveis/químicaRESUMO
Bioprinting has seen significant progress in recent years for the fabrication of bionic tissues with high complexity. However, it remains challenging to develop cell-laden bioinks exhibiting superior physiochemical properties and bio-functionality. In this study, a multifunctional nanocomposite bioink is developed based on amine-functionalized copper (Cu)-doped mesoporous bioactive glass nanoparticles (ACuMBGNs) and a hydrogel formulation relying on dynamic covalent chemistry composed of alginate dialdehyde (oxidized alginate) and gelatin, with favorable rheological properties, improved shape fidelity, and structural stability for extrusion-based bioprinting. The reversible dynamic microenvironment in combination with the impact of cell-adhesive ligands introduced by aminated particles enables the rapid spreading (within 3 days) and high survival (>90%) of embedded human osteosarcoma cells and immortalized mouse bone marrow-derived stroma cells. Osteogenic differentiation of primary mouse bone marrow stromal stem cells (BMSCs) and angiogenesis are promoted in the bioprinted alginate dialdehyde-gelatin (ADA-GEL or AG)-ACuMBGN scaffolds without additional growth factors in vitro, which is likely due to ion stimulation from the incorporated nanoparticles and possibly due to cell mechanosensing in the dynamic matrix. In conclusion, it is envisioned that these nanocomposite bioinks can serve as promising platforms for bioprinting complex 3D matrix environments providing superior physiochemical and biological performance for bone tissue engineering.
Assuntos
Bioimpressão , Nanocompostos , Nanopartículas , Animais , Hidrogéis/química , Camundongos , Nanocompostos/química , Nanopartículas/química , Osteogênese , Impressão Tridimensional , Engenharia Tecidual , Alicerces Teciduais/químicaRESUMO
Non-viral vectors represent versatile and immunologically safer alternatives for nucleic acid delivery. Nanoneedles and high-aspect ratio nanostructures are unconventional but interesting delivery systems, in which delivery is mediated by surface interactions. Herein, nanoneedles are synergistically combined with polysaccharide-polyplex nanofilms and enhanced transfection efficiency is observed, compared to polyplexes in suspension. Different polyplex-polyelectrolyte nanofilm combinations are assessed and it is found that transfection efficiency is enhanced when using polysaccharide-based polyanions, rather than being only specific for hyaluronic acid, as suggested in earlier studies. Moreover, results show that enhanced transfection is not mediated by interactions with the CD44 receptor, previously hypothesized as a major mechanism mediating enhancement via hyaluronate. In cardiac tissue, nanoneedles are shown to increase the transfection efficiency of nanofilms compared to flat substrates; while in vitro, high transfection efficiencies are observed in nanostructures where cells present large interfacing areas with the substrate. The results of this study demonstrate that surface-mediated transfection using this system is efficient and safe, requiring amounts of nucleic acid with an order of magnitude lower than standard culture transfection. These findings expand the spectrum of possible polyelectrolyte combinations that can be used for the development of suitable non-viral vectors for exploration in further clinical trials.
Assuntos
Técnicas de Transferência de Genes , Ácidos Nucleicos , Terapia Genética/métodos , Polieletrólitos , TransfecçãoRESUMO
Two major challenges of 3D bioprinting are the retention of structural fidelity and efficient endothelialization for tissue vascularization. We address both of these issues by introducing a versatile 3D bioprinting strategy, in which a templating bioink is deposited layer-by-layer alongside a matrix bioink to establish void-free multimaterial structures. After crosslinking the matrix phase, the templating phase is sacrificed to create a well-defined 3D network of interconnected tubular channels. This void-free 3D printing (VF-3DP) approach circumvents the traditional concerns of structural collapse, deformation and oxygen inhibition, moreover, it can be readily used to print materials that are widely considered "unprintable". By pre-loading endothelial cells into the templating bioink, the inner surface of the channels can be efficiently cellularized with a confluent endothelial layer. This in-situ endothelialization method can be used to produce endothelium with a far greater uniformity than can be achieved using the conventional post-seeding approach. This VF-3DP approach can also be extended beyond tissue fabrication and towards customized hydrogel-based microfluidics and self-supported perfusable hydrogel constructs.
RESUMO
Two major challenges of 3D bioprinting are the retention of structural fidelity and efficient endothelialization for tissue vascularization. We address both of these issues by introducing a versatile 3D bioprinting strategy, in which a templating bioink is deposited layer-by-layer alongside a matrix bioink to establish void-free multimaterial structures. After crosslinking the matrix phase, the templating phase is sacrificed to create a well-defined 3D network of interconnected tubular channels. This void-free 3D printing (VF-3DP) approach circumvents the traditional concerns of structural collapse, deformation and oxygen inhibition, moreover, it can be readily used to print materials that are widely considered "unprintable". By pre-loading endothelial cells into the templating bioink, the inner surface of the channels can be efficiently cellularized with a confluent endothelial layer. This in-situ endothelialization method can be used to produce endothelium with a far greater uniformity than can be achieved using the conventional post-seeding approach. This VF-3DP approach can also be extended beyond tissue fabrication and towards customized hydrogel-based microfluidics and self-supported perfusable hydrogel constructs.
RESUMO
In vitro 3D models are advanced biological tools that have been established to overcome the shortcomings of oversimplified 2D cultures and mouse models. Various in vitro 3D immuno-oncology models have been developed to mimic and recapitulate the cancer-immunity cycle, evaluate immunotherapy regimens, and explore options for optimizing current immunotherapies, including for individual patient tumours. Here, we review recent developments in this field. We focus, first, on the limitations of existing immunotherapies for solid tumours, secondly, on how in vitro 3D immuno-oncology models are established using various technologies - including scaffolds, organoids, microfluidics and 3D bioprinting - and thirdly, on the applications of these 3D models for comprehending the cancer-immunity cycle as well as for assessing and improving immunotherapies for solid tumours.
Assuntos
Neoplasias , Animais , Camundongos , Humanos , Neoplasias/terapia , Organoides , Imunoterapia , Modelos Animais de Doenças , ImunidadeRESUMO
The bio-engineered ovary is an essential technology for treating female infertility. Especially the development of relevant in vitro models could be a critical step in a drug study. Herein, we develop a semi-opened culturing system (SOCS) strategy that maintains a 3D structure of follicles during the culture. Based on the SOCS, we further developed micro-cavity ovary (MCO) with mouse follicles by the microsphere-templated technique, where sacrificial gelatin microspheres were mixed with photo-crosslinkable gelatin methacryloyl (GelMA) to engineer a micro-cavity niche for follicle growth. The semi-opened MCO could support the follicle growing to the antral stage, secreting hormones, and ovulating cumulus-oocyte complex out of the MCO without extra manipulation. The MCO-ovulated oocyte exhibits a highly similar transcriptome to the in vivo counterpart (correlation of 0.97) and can be fertilized. Moreover, we found that a high ROS level could affect the cumulus expansion, which may result in anovulation disorder. The damage could be rescued by melatonin, but the end of cumulus expansion was 3h earlier than anticipation, validating that MCO has the potential for investigating ovarian toxic agents in vitro. We provide a novel approach for building an in vitro ovarian model to recapitulate ovarian functions and test chemical toxicity, suggesting it has the potential for clinical research in the future.
RESUMO
3D bioprinting has long been subjected to trade-offs between physicochemical and biological outcomes. The resulting material properties of the initial bioinks and final printing products usually lie within a moderate range, which limits the application of bioprinting and its products. Recent progress in bioinks and bioprinting techniques has significantly expanded the window of material properties. In this review, I define two bioprinting windows to clarify the trade-offs between physical chemistry and biology and provide a comprehensive overview of recent advances that have pushed the rheological boundaries of bioinks and mechanical boundaries of bioprints, focusing on unusual material properties. I illustrate this with recent examples, consolidate the existing strategies into well-defined categories, highlight the prominent trends, and provide perspectives on additional boundaries.
Assuntos
Bioimpressão , Bioimpressão/métodos , Impressão Tridimensional , Reologia , Engenharia Tecidual , Alicerces Teciduais/químicaRESUMO
Hydrogels, three-dimensional (3D) networks of hydrophilic polymers formed in water, are a significant type of soft matter used in fundamental and applied sciences. Hydrogels are of particular interest for biomedical applications, owing to their soft elasticity and good biocompatibility. However, the high water content and soft nature of hydrogels often make it difficult to process them into desirable solid forms. The development of 3D printing (3DP) technologies has provided opportunities for the manufacturing of hydrogels, by adopting a freeform fabrication method. Owing to its high printing speed and resolution, vat photopolymerization 3DP has recently attracted considerable interest for hydrogel fabrication, with digital light processing (DLP) becoming a widespread representative technique. Whilst acknowledging that other types of vat photopolymerization 3DP have also been applied for this purpose, we here only focus on DLP and its derivatives. In this review, we first comprehensively outline the most recent advances in both materials and fabrication, including the adaptation of novel hydrogel systems and advances in processing (e.g. volumetric printing and multimaterial integration). Secondly, we summarize the applications of hydrogel DLP, including regenerative medicine, functional microdevices, and soft robotics. To the best of our knowledge, this is the first time that either of these specific review focuses has been adopted in the literature. More importantly, we discuss the major challenges associated with hydrogel DLP and provide our perspectives on future trends. To summarize, this review aims to aid and inspire other researchers investigatng DLP, photocurable hydrogels, and the research fields related to them.
Assuntos
Hidrogéis , Impressão Tridimensional , Sistemas de Liberação de Medicamentos , Polímeros , ÁguaRESUMO
Micropores are essential for tissue engineering to ensure adequate mass transportation for embedded cells. Despite the considerable progress made by advanced 3D bioprinting technologies, it remains challenging to engineer micropores of 100 µm or smaller in cell-laden constructs. Here, a microgel-templated porogel (MTP) bioink platform is reported to introduce controlled microporosity in 3D bioprinted hydrogels in the presence of living cells. Templated gelatin microgels are fabricated with varied sizes (≈10, ≈45, and ≈100 µm) and mixed with photo-crosslinkable formulations to make composite MTP bioinks. The addition of microgels significantly enhances the shear-thinning and self-healing viscoelastic properties and thus the printability of bioinks with cell densities up to 1 × 108 mL-1 in matrix. Consistent printability is achieved for a series of MTP bioinks based on different component ratios and matrix materials. After photo-crosslinking the matrix phase, the templated microgels dissociated and diffused under physiological conditions, resulting in corresponding micropores in situ. When embedding osteoblast-like cells in the matrix phase, the MTP bioinks support higher metabolic activity and more uniform mineral formation than bulk gel controls. The approach provides a facile strategy to engineer precise micropores in 3D printed structures to compensate for the limited resolution of current bioprinting approaches.
Assuntos
Bioimpressão , Microgéis , Bioimpressão/métodos , Hidrogéis , Impressão Tridimensional , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
Intimal hyperplasia and restenosis caused by excessive proliferation of smooth muscle cells (SMC) are the main factors for the failure of stent implantation. Drug-eluting stents carried with antiproliferative drugs have emerged as a successful approach to alleviate early neointimal development. However, these agents have been reported to have an undesirable effect on re-endothelialization. In this study, we proposed an integrated bioresorbable stent coated with dipyridamole (DP)-loaded poly(D,L-lactide) (PDLLA) nanofibers. Three-dimensional (3D) bioresorbable stents were fabricated by printing on a rotation mandrel using polycaprolactone (PCL), and the stents were further coated with PDLLA/DP nanofibers. The in vitro degradation and drug release evaluation illustrated the potential for long-term release of DP. Stents coated with PDLLA/DP nanofibers showed excellent hemocompatibility. The cell viability, proliferation, and morphology analysis results revealed that stents coated with PDLLA/DP nanofibers could prevent the proliferation of SMC and have no adverse effects on endothelial cells. The in vivo implantation of stents coated with PDLLA/DP nanofibers showed initial patency and continuous endothelialization and alleviated neointimal formation. The attractive in vitro and in vivo performance indicated its potential for restenosis prevention and endothelialization.
RESUMO
As a major extracellular matrix component within the skin, collagen has been widely used to engineer human skin tissues. However, most collagen is extracted from animals. Here, we introduced recombinant human type III collagen (rhCol3) as a bioactive component to formulate bioinks for the bioprinting of a full-thickness human skin equivalent. Human dermal fibroblasts were encapsulated in the gelatin methacryloyl-rhCol3 composite bioinks and printed on a transwell to form the dermis layer, on which human epidermal keratinocytes were seeded to perform an air-liquid interface culture for 6 weeks. After optimizing the bioink formulation and bioprinting process, we investigated the effect of rhCol3 on skin tissue formation. The results suggest that a higher concentration of rhCol3 would enhance the growth of both cells, resulting in a more confluent (~100%) spreading of the epidermal keratinocytes at an early stage (3 days), compared to the rhCol3-free counterpart. Moreover, in an in vivo experiment, adding rhCol3 in the hydrogel formulation would contribute to the skin wound healing process. Taken together, we conclude that rhCol3 could act as a functional bioink component to promote basic skin cellular processes for skin tissue engineering.
RESUMO
Natural tissues and organs exhibit an array of spatial gradients, from the polarized neural tube during embryonic development to the osteochondral interface present at articulating joints. The strong structure-function relationships in these heterogeneous tissues have sparked intensive research into the development of methods that can replicate physiological gradients in engineered tissues. In this Review, we consider different gradients present in natural tissues and discuss their critical importance in functional tissue engineering. Using this basis, we consolidate the existing fabrication methods into four categories: additive manufacturing, component redistribution, controlled phase changes, and postmodification. We have illustrated this with recent examples, highlighted prominent trends in the field, and outlined a set of criteria and perspectives for gradient fabrication.
Assuntos
Materiais Biocompatíveis , Engenharia Tecidual , Materiais Biocompatíveis/síntese química , Engenharia Tecidual/métodos , Engenharia Tecidual/tendências , Alicerces Teciduais/químicaRESUMO
The application of nanotechnology to regenerative medicine has increased over recent decades. The development of materials that can influence biology at the nanoscale has gained interest as our understanding of the interactions between cells and biomaterials at the nanoscale has grown. Materials that are either nanostructured or influence the nanostructure of the cellular microenvironment have been developed and shown to have advantages over their microscale counterparts. There are several reviews which have been published that discuss how nanomaterials have been used in regenerative medicine, particularly in bone regeneration. Most of these studies have explored this concept in specific areas, such as the application of glass-based nanocomposites, nanotechnology for targeted drug delivery to stimulate bone repair, and the progress in nanotechnology for the treatment of osteoporosis. In this review paper, the impact of nanotechnology in biomaterials development for bone regeneration will be discussed highlighting specifically, nanostructured materials that influence mechanical properties, biocompatibility, and osteoinductivity.
Assuntos
Nanoestruturas , Engenharia Tecidual , Materiais Biocompatíveis , Regeneração Óssea , Nanotecnologia , Medicina RegenerativaRESUMO
Despite progress in engineering both vascularized tissues and oriented tissues, the fabrication of 3D vascularized oriented tissues remains a challenge due to an inability to successfully integrate vascular and anisotropic structures that can support mass transfer and guide cell alignment, respectively. More importantly, there is a lack of an effective approach to guiding the scaffold design bearing both structural features. Here, an approach is presented to optimize the bifurcated channels within an anisotropic scaffold based on oxygen transport simulation and biological experiments. The oxygen transport simulation is performed using the experimentally measured effective oxygen diffusion coefficient and hydraulic permeability of the anisotropic scaffolds, which are also seeded with muscle precursor cells and cultured in a custom-made perfusion bioreactor. Symmetric bifurcation model is used as fractal unit to design the channel network based on biomimetic principles. The bifurcation level of channel network is further optimized based on the oxygen transport simulation, which is then validated by DNA quantification assay and pimonidazole immunostaining. This study provides a practical guide to optimizing bifurcated channels in anisotropic scaffolds for oriented tissue engineering.
Assuntos
Engenharia Tecidual , Alicerces Teciduais , BiomiméticaRESUMO
A major challenge in three-dimensional (3D) bioprinting is the limited number of bioinks that fulfill the physicochemical requirements of printing while also providing a desirable environment for encapsulated cells. Here, we address this limitation by temporarily stabilizing bioinks with a complementary thermo-reversible gelatin network. This strategy enables the effective printing of biomaterials that would typically not meet printing requirements, with instrument parameters and structural output largely independent of the base biomaterial. This approach is demonstrated across a library of photocrosslinkable bioinks derived from natural and synthetic polymers, including gelatin, hyaluronic acid, chondroitin sulfate, dextran, alginate, chitosan, heparin, and poly(ethylene glycol). A range of complex and heterogeneous structures are printed, including soft hydrogel constructs supporting the 3D culture of astrocytes. This highly generalizable methodology expands the palette of available bioinks, allowing the biofabrication of constructs optimized to meet the biological requirements of cell culture and tissue engineering.
RESUMO
The controlled fabrication of gradient materials is becoming increasingly important as the next generation of tissue engineering seeks to produce inhomogeneous constructs with physiological complexity. Current strategies for fabricating gradient materials can require highly specialized materials or equipment and cannot be generally applied to the wide range of systems used for tissue engineering. Here, the fundamental physical principle of buoyancy is exploited as a generalized approach for generating materials bearing well-defined compositional, mechanical, or biochemical gradients. Gradient formation is demonstrated across a range of different materials (e.g., polymers and hydrogels) and cargos (e.g., liposomes, nanoparticles, extracellular vesicles, macromolecules, and small molecules). As well as providing versatility, this buoyancy-driven gradient approach also offers speed (<1 min) and simplicity (a single injection) using standard laboratory apparatus. Moreover, this technique is readily applied to a major target in complex tissue engineering: the osteochondral interface. A bone morphogenetic protein 2 gradient, presented across a gelatin methacryloyl hydrogel laden with human mesenchymal stem cells, is used to locally stimulate osteogenesis and mineralization in order to produce integrated osteochondral tissue constructs. The versatility and accessibility of this fabrication platform should ensure widespread applicability and provide opportunities to generate other gradient materials or interfacial tissues.
Assuntos
Materiais Biocompatíveis/química , Proteína Morfogenética Óssea 2/química , Nanocompostos/química , Fenômenos Físicos , Alicerces Teciduais/química , Células Cultivadas/química , Reagentes de Ligações Cruzadas/química , Gelatina/química , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Células-Tronco Mesenquimais , Metacrilatos/química , Osteogênese , Propriedades de Superfície , Engenharia Tecidual/métodosRESUMO
Multilayer (ML) hydrogels are useful to achieve stepwise and heterogeneous control over the organization of biomedical materials and cells. There are numerous challenges in the development of fabrication approaches toward this, including the need for mild processing conditions that maintain the integrity of embedded compounds and the versatility in processing to introduce desired complexity. Here, we report a method to fabricate heterogeneous multilayered hydrogels based on diffusion-induced gelation. This technique uses the quick diffusion of ions and small molecules (i.e., photoinitiators) through gel-sol or gel-gel interfaces to produce hydrogel layers. Specifically, ionically (e.g., alginate-based) and covalently [e.g., gelatin methacryloyl (GelMA-based)] photocross-linked hydrogels are generated in converse directions from the same interface. The ML (e.g., seven layers) ionic hydrogels can be formed within seconds to minutes with thicknesses ranging from tens to hundreds of micrometers. The thicknesses of the covalent hydrogels are determined by the reaction time (or the molecule diffusion time). Multiwalled tubular structures (e.g., mimicking branched multiwalled vessels) are mainly investigated in this study based on a removable gel core, but this method can be generalized to other material patterns. The process is also demonstrated to support the encapsulation of viable cells and is compatible with a range of thermally reversible core materials (e.g., gelatin and Pluronic F127) and covalently cross-linked formulations (e.g., GelMA and methacrylated hyaluronic acid). This biofabrication process enhances our ability to fabricate a range of structures that are useful for biomedical applications.
Assuntos
Hidrogéis/química , Materiais Biocompatíveis , Gelatina , Ácido Hialurônico , Engenharia TecidualRESUMO
An in situ crosslinking strategy is used for 3D bioprinting of nonviscous photo-crosslinkable hydrogels. This method can be generalized to various photo-crosslinkable formulations, maintaining high embedded cell viability and tunable cell behavior. Heterogeneous and hollow filaments can be printed using this strategy, allowing fabrication of complex engineered cell-laden constructs.