Defect-Mediated Phase Transformation in Anisotropic Two-Dimensional PdSe2 Crystals for Seamless Electrical Contacts.

The failure to achieve stable Ohmic contacts in two-dimensional material devices currently limits their promised performance and integration. Here we demonstrate that a phase transformation in a region of a layered semiconductor, PdSe2, can form a contiguous metallic Pd17Se15 phase, leading to the formation of seamless Ohmic contacts for field-effect transistors. This phase transition is driven by defects created by exposure to an argon plasma. Cross-sectional scanning transmission electron microscopy is combined with theoretical calculations to elucidate how plasma-induced Se vacancies mediate the phase transformation. The resulting Pd17Se15 phase is stable and shares the same native chemical bonds with the original PdSe2 phase, thereby forming an atomically sharp Pd17Se15/PdSe2 interface. These Pd17Se15 contacts exhibit a low contact resistance of ∼0.75 kΩ µm and Schottky barrier height of ∼3.3 meV, enabling nearly a 20-fold increase of carrier mobility in PdSe2 transistors compared to that of traditional Ti/Au contacts. This finding opens new possibilities in the development of better electrical contacts for practical applications of 2D materials.

3D Imaging and Manipulation of Subsurface Selenium Vacancies in PdSe_{2}.

Two-dimensional materials such as layered transition-metal dichalcogenides (TMDs) are ideal platforms for studying defect behaviors, an essential step towards defect engineering for novel material functions. Here, we image the 3D lattice locations of selenium-vacancy V_{Se} defects and manipulate them using a scanning tunneling microscope (STM) near the surface of PdSe_{2}, a recently discovered pentagonal layered TMD. The V_{Se} show a characterisitc charging ring in a spatially resolved conductance map, based on which we can determine its subsurface lattice location precisely. Using the STM tip, not only can we reversibly switch the defect states between charge neutral and charge negative, but also trigger migrations of V_{Se} defects. This allows a demonstration of direct "writing" and "erasing" of atomic defects and tracing the diffusion pathways. First-principles calculations reveal a small diffusion barrier of V_{Se} in PdSe_{2}, which is much lower than S vacancy in MoS_{2} or an O vacancy in TiO_{2}. This finding opens an opportunity of defect engineering in PdSe_{2} for such as controlled phase transformations and resistive-switching memory device application.

PdSe2: Pentagonal Two-Dimensional Layers with High Air Stability for Electronics.

Most studied two-dimensional (2D) materials exhibit isotropic behavior due to high lattice symmetry; however, lower-symmetry 2D materials such as phosphorene and other elemental 2D materials exhibit very interesting anisotropic properties. In this work, we report the atomic structure, electronic properties, and vibrational modes of few-layered PdSe2 exfoliated from bulk crystals, a pentagonal 2D layered noble transition metal dichalcogenide with a puckered morphology that is air-stable. Micro-absorption optical spectroscopy and first-principles calculations reveal a wide band gap variation in this material from 0 (bulk) to 1.3 eV (monolayer). The Raman-active vibrational modes of PdSe2 were identified using polarized Raman spectroscopy, and a strong interlayer interaction was revealed from large, thickness-dependent Raman peak shifts, agreeing with first-principles Raman simulations. Field-effect transistors made from the few-layer PdSe2 display tunable ambipolar charge carrier conduction with a high electron field-effect mobility of ∼158 cm2 V-1 s-1, indicating the promise of this anisotropic, air-stable, pentagonal 2D material for 2D electronics.

High performance top-gated multilayer WSe2 field effect transistors.

In this paper, high performance top-gated WSe2 field effect transistor (FET) devices are demonstrated via a two-step remote plasma assisted ALD process. High-quality, low-leakage aluminum oxide (Al2O3) gate dielectric layers are deposited onto the WSe2 channel using a remote plasma assisted ALD process with an ultrathin (∼1 nm) titanium buffer layer. The first few nanometers (∼2 nm) of the Al2O3 dielectric film is deposited at relatively low temperature (i.e. 50 °C) and remainder of the film is deposited at 150 °C to ensure the conformal coating of Al2O3 on the WSe2 surface. Additionally, an ultra-thin titanium buffer layer is introduced at the WSe2 channel surface prior to ALD process to mitigate oxygen plasma induced doping effects. Excellent device characteristics with current on-off ratio in excess of 106 and a field effect mobility as high as 70.1 cm2 V-1 s-1 are achieved in a few-layer WSe2 FET device with a 30 nm Al2O3 top-gate dielectric. With further investigation and careful optimization, this method can play an important role for the realization of high performance top gated FETs for future optoelectronic device applications.

Tailoring Vacancies Far Beyond Intrinsic Levels Changes the Carrier Type and Optical Response in Monolayer MoSe2-x Crystals.

Defect engineering has been a critical step in controlling the transport characteristics of electronic devices, and the ability to create, tune, and annihilate defects is essential to enable the range of next-generation devices. Whereas defect formation has been well-demonstrated in three-dimensional semiconductors, similar exploration of the heterogeneity in atomically thin two-dimensional semiconductors and the link between their atomic structures, defects, and properties has not yet been extensively studied. Here, we demonstrate the growth of MoSe2-x single crystals with selenium (Se) vacancies far beyond intrinsic levels, up to ∼20%, that exhibit a remarkable transition in electrical transport properties from n- to p-type character with increasing Se vacancy concentration. A new defect-activated phonon band at ∼250 cm(-1) appears, and the A1g Raman characteristic mode at 240 cm(-1) softens toward ∼230 cm(-1) which serves as a fingerprint of vacancy concentration in the crystals. We show that post-selenization using pulsed laser evaporated Se atoms can repair Se-vacant sites to nearly recover the properties of the pristine crystals. First-principles calculations reveal the underlying mechanisms for the corresponding vacancy-induced electrical and optical transitions.

Excitation-Dependent Anisotropic Raman Response of Atomically Thin Pentagonal PdSe2.

The group-10 noble-metal dichalcogenides have recently emerged as a promising group of two-dimensional materials due to their unique crystal structures and fascinating physical properties. In this work, the resonance enhancement of the interlayer breathing mode (B1) and intralayer Ag 1 and Ag 3 modes in atomically thin pentagonal PdSe2 were studied using angle-resolved polarized Raman spectroscopy with 13 excitation wavelengths. Under the excitation energies of 2.33, 2.38, and 2.41 eV, the Raman intensities of both the low-frequency breathing mode B1 and high-frequency mode Ag 1 of all the thicknesses are the strongest when the incident polarization is parallel to the a axis of PdSe2, serving as a fast identification of the crystal orientation of few-layer PdSe2. We demonstrated that the intensities of B1, Ag 1, and Ag 3 modes are the strongest with the excitation energies between 2.18 and 2.38 eV when the incident polarization is parallel to PdSe2 a axis, which arises from the resonance enhancement caused by the absorption. Our investigation reveals the underlying interplay of the anisotropic electron-phonon and electron-photon interactions in the Raman scattering process of atomically thin PdSe2. It paves the way for future applications on PdSe2-based optoelectronics.

Atomically Precise PdSe2 Pentagonal Nanoribbons.

We report atomically precise pentagonal PdSe2 nanoribbons (PNRs) fabricated on a pristine PdSe2 substrate with a hybrid method of top-down and bottom-up processes. The PNRs form a uniform array of dimer structure with a width of 2.4 nm and length of more than 200 nm. In situ four-probe scanning tunneling microscopy (STM) reveals metallic behavior of PNRs with ballistic transport for at least 20 nm in length. Density functional theory calculations produce a semiconducting density of states of isolated PNRs and find that the band gap narrows and disappears quickly once considering coupling between PNR stacking layers or interaction with the PdSe2 substrate. The coupling of PNRs is further corroborated by Raman spectroscopy and field-effect transistor measurements. The facile method of fabricating atomically precise PNRs offers an air-stable functional material for dimensional control.

Surfactant-Mediated Growth and Patterning of Atomically Thin Transition Metal Dichalcogenides.

The role of additives in facilitating the growth of conventional semiconducting thin films is well-established. Apparently, their presence is also decisive in the growth of two-dimensional transition metal dichalcogenides (TMDs), yet their role remains ambiguous. In this work, we show that the use of sodium bromide enables synthesis of TMD monolayers via a surfactant-mediated growth mechanism, without introducing liquefaction of metal oxide precursors. We discovered that sodium ions provided by sodium bromide chemically passivate edges of growing molybdenum disulfide crystals, relaxing in-plane strains to suppress 3D islanding and promote monolayer growth. To exploit this growth model, molybdenum disulfide monolayers were directly grown into desired patterns using predeposited sodium bromide as a removable template. The surfactant-mediated growth not only extends the families of metal oxide precursors but also offers a way for lithography-free patterning of TMD monolayers on various surfaces to facilitate fabrication of atomically thin electronic devices.

Two-Dimensional Palladium Diselenide with Strong In-Plane Optical Anisotropy and High Mobility Grown by Chemical Vapor Deposition.

Two-dimensional (2D) palladium diselenide (PdSe2 ) has strong interlayer coupling and a puckered pentagonal structure, leading to remarkable layer-dependent electronic structures and highly anisotropic in-plane optical and electronic properties. However, the lack of high-quality, 2D PdSe2 crystals grown by bottom-up approaches limits the study of their exotic properties and practical applications. In this work, chemical vapor deposition growth of highly crystalline few-layer (≥2 layers) PdSe2 crystals on various substrates is reported. The high quality of the PdSe2 crystals is confirmed by low-frequency Raman spectroscopy, scanning transmission electron microscopy, and electrical characterization. In addition, strong in-plane optical anisotropy is demonstrated via polarized Raman spectroscopy and second-harmonic generation maps of the PdSe2 flakes. A theoretical model based on kinetic Wulff construction theory and density functional theory calculations is developed and described the observed evolution of "square-like" shaped PdSe2 crystals into rhombus due to the higher nucleation barriers for stable attachment on the (1,1) and (1,-1) edges, which results in their slower growth rates. Few-layer PdSe2 field-effect transistors reveal tunable ambipolar charge carrier conduction with an electron mobility up to ≈294 cm2 V-1 s-1 , which is comparable to that of exfoliated PdSe2 , indicating the promise of this anisotropic 2D material for electronics.

Strain tolerance of two-dimensional crystal growth on curved surfaces.

Two-dimensional (2D) crystal growth over substrate features is fundamentally guided by the Gauss-Bonnet theorem, which mandates that rigid, planar crystals cannot conform to surfaces with nonzero Gaussian curvature. Here, we reveal how topographic curvature of lithographically designed substrate features govern the strain and growth dynamics of triangular WS2 monolayer single crystals. Single crystals grow conformally without strain over deep trenches and other features with zero Gaussian curvature; however, features with nonzero Gaussian curvature can easily impart sufficient strain to initiate grain boundaries and fractured growth in different directions. Within a strain-tolerant regime, however, triangular single crystals can accommodate considerable (<1.1%) localized strain exerted by surface features that shift the bandgap up to 150 meV. Within this regime, the crystal growth accelerates in specific directions, which we describe using a growth model. These results present a previously unexplored strategy to strain-engineer the growth directions and optoelectronic properties of 2D crystals.

Photocarrier Transfer across Monolayer MoS2-MoSe2 Lateral Heterojunctions.

In-plane heterojuctions formed from two monolayer semiconductors represent the finest control of electrons in condensed matter and have attracted significant interest. Various device studies have shown the effectiveness of such structures to control electronic processes, illustrating their potentials for electronic and optoelectronic applications. However, information about the physical mechanisms of charge carrier transfer across the junctions is still rare, mainly due to the lack of adequate experimental techniques. Here we show that transient absorption measurements with high spatial and temporal resolution can be used to directly monitor such transfer processes. We studied MoS2-MoSe2 in-plane heterostructures fabricated by chemical vapor deposition and lithographic patterning followed by laser-generated vapor sulfurization. Transient absorption measurements in reflection geometry revealed evidence of exciton transfer from MoS2 to MoSe2. By comparing the experimental data with a simulation, we extracted an exciton transfer velocity of 104 m s-1. These results provide valuable information for understanding and controlling in-plane carrier transfer in two-dimensional lateral heterostructures for their electronic and optoelectronic applications.

Atmospheric and Long-term Aging Effects on the Electrical Properties of Variable Thickness WSe2 Transistors.

Atmospheric and long-term aging effects on electrical properties of WSe2 transistors with various thicknesses are examined. Although countless published studies report electrical properties of transition-metal dichalcogenide materials, many are not attentive to testing environment or to age of samples, which we have found significantly impacts results. Our as-fabricated exfoliated WSe2 pristine devices are predominantly n-type, which is attributed to selenium vacancies. Transfer characteristics of as-fabricated devices measured in air then vacuum reveal physisorbed atmospheric molecules significantly reduced n-type conduction in air. First-principles calculations suggest this short-term reversible atmospheric effect can be attributed primarily to physisorbed H2O on pristine WSe2, which is easily removed from the pristine surface in vacuum due to the low adsorption energy. Devices aged in air for over 300 h demonstrate irreversibly increased p-type conduction and decreased n-type conduction. Additionally, they develop an extended time constant for recovery of the atmospheric adsorbents effect. Short-term atmospheric aging (up to approximately 900 h) is attributed to O2 and H2O molecules physisorbed to selenium vacancies where electron transfer from the bulk and adsorbed binding energies are higher than the H2O-pristine WSe2. The residual/permanent aging component is attributed to electron trapping molecular O2 and isoelectronic O chemisorption at selenium vacancies, which also passivates the near-conduction band gap state, p-doping the material, with very high binding energy. All effects demonstrated have the expected thickness dependence, namely, thinner devices are more sensitive to atmospheric and long-term aging effects.

Ion Migration Studies in Exfoliated 2D Molybdenum Oxide via Ionic Liquid Gating for Neuromorphic Device Applications.

The formation of an electric double layer in ionic liquid (IL) can electrostatically induce charge carriers and/or intercalate ions in and out of the lattice which can trigger a large change of the electronic, optical, and magnetic properties of materials and even modify the crystal structure. We present a systematic study of ionic liquid gating of exfoliated 2D molybdenum trioxide (MoO3) devices and correlate the resultant electrical properties to the electrochemical doping via ion migration during the IL biasing process. A nearly 9 orders of magnitude modulation of the MoO3 conductivity is obtained for the two types of ionic liquids that are investigated. In addition, notably rapid on/off switching was realized through a lithium-containing ionic liquid whereas much slower modulation was induced via oxygen extraction/intercalation. Time of flight-secondary ion mass spectrometry confirms the Li intercalation. Density functional theory (DFT) calculations have been carried out to examine the underlying metallization mechanism. Results of short-pulse tests show the potential of these MoO3 devices as neuromorphic computing elements due to their synaptic plasticity.