Sr2+doped CsPbBrI2perovskite nanocrystals coated with ZrO2for applications as white LEDs.

Perovskite nanocrystals (NCs) feature adjustable bandgap, wide absorption range, and great color purity for robust perovskite optoelectronic applications. Nevertheless, the absence of lasting stability under continues energization, is still a major hurdle to the widespread use of NCs in commercial applications. In particular, the reactivity of red-emitting perovskites to environmental surroundings is more sensitive than that of their green counterparts. Here, we present a simple synthesis of ultrathin ZrO2coated, Sr2+doped CsPbBrI2NCs. Introducing divalent Sr2+may significantly eliminate Pb° surface traps, whereas ZrO2encapsulation greatly improves environmental stability. The photoluminescence quantum yield of the Sr2+-doped CsPbBrI2/ZrO2NCs was increased from 50.2% to 87.2% as a direct consequence of the efficient elimination of Pb° surface defects. Moreover, the thickness of the ZrO2thin coating gives remarkable heat resistance and improved water stability. Combining CsPbSr0.3BrI2/ZrO2NCs in a white light emitting diode (LED) with an excellent optical efficiency (100.08 lm W-1), high and a broad gamut 141% (NTSC) standard. This work offers a potential method to suppress Pb° traps by doping with Sr2+and improves the performance of perovskite NCs by ultrathin coating structured ZrO2, consequently enabling their applicability in commercial optical displays.

Tuning optical properties of CsPbBr3by mixing Nd3+trivalent lanthanide halide cations for blue light emitting devices.

In recent years, significant progress has been made in the red and green perovskite quantum dots (PQDs) based light-emitting devices. However, a scarcity of blue-emitting devices that are extremely efficient precludes their research and development for optoelectronic applications. Taking advantage of tunable bandgaps of PQDs over the entire visible spectrum, herein we tune optical properties of CSPbBr3by mixing Nd3+trivalent lanthanide halide cations for blue light-emitting devices. The CsPbBr3PQDs doped with Nd3+trivalent lanthanide halide cations emitted strong photoemission from green into the blue region. By adjusting their doping concentration, a tunable wavelength from (515 nm) to (450 nm) was achieved with FWHM from (37.83 nm) to (16.6 nm). We simultaneously observed PL linewidth broadening thermal quenching of PL and the blue shift of the optical bandgap from temperature-dependent PL studies. The Nd3+cations into CsPbBr3PQDs more efficiently reduced non-radiative recombination. As a result of the efficient removal of defects from PQDs, the photoluminescence quantum yield (PLQY) has been significantly increased to 91% in the blue-emitting region. Significantly, Nd3+PQDs exhibit excellent long-term stability against the external environment, including water, temperature, and ultraviolet light irradiation. Moreover, we successfully transformed Nd3+doped PQDs into highly fluorescent nanocomposites. Incorporating these findings, we fabricate and test a stable blue light-emitting LED with EL emission at (462 nm), (475 nm), and successfully produce white light emission from Nd3+doped nanocomposites with a CIE at (0.32, 0.34), respectively. The findings imply that low-cost Nd3+doped perovskites may be attractive as light converters in LCDs with a broad color gamut.

The developments of cyan emitting phosphors to fulfill the cyan emission gap of white-LEDs.

Future generations of solid-state lighting (SSL) will prioritize the development of innovative luminescent materials with superior characteristics. The phosphors converted into white light-emitting diodes (white LEDs) often have a blue-green cavity. Cyan-emitting phosphor fills the spectral gap and produces "full-visible-spectrum lighting." Full-visible spectrum lighting is beneficial for several purposes, such as light therapy, plant growth, and promoting an active and healthy lifestyle. The design of cyan garnet-type phosphors, like Ca2LuHf2Al3O12 (CLHAO), has recently been the subject of interest. This review study reports a useful cyan-emitting phosphor based on CLHAO composition with a garnet structure to have a cyan-to-green emitting color with good energy transfer. It could be employed as cyan filler in warm-white LED manufacturing. Due to its stability, ability to dope with various ions suitable for their desired qualities, and ease of synthesis, this garnet-like compound is a great host material for rare-earth ions. The development of CLHAO cyan-emitting phosphors has exceptionally high luminescence, resulting in high CRI and warm-white LEDs, making them a viable desire for LED manufacturing. The development of CLHAO cyan-emitting phosphors with diverse synthesis techniques, along with their properties and applications in white LEDs, are extensively covered in this review paper.

Synergistic Enhancement of Near-Infrared Emission in CsPbCl3 Host via Co-Doping with Yb3+ and Nd3+ for Perovskite Light Emitting Diodes.

Perovskite nanocrystals (PeNCs) have emerged as a promising class of luminescent materials offering size and composition-tunable luminescence with high efficiency and color purity in the visible range. PeNCs doped with Yb3+ ions, known for their near-infrared (NIR) emission properties, have gained significant attention due to their potential applications. However, these materials still face challenges with weak NIR electroluminescence (EL) emission and low external quantum efficiency (EQE), primarily due to undesired resonance energy transfer (RET) occurring between the host and Yb3+ ions, which adversely affects their emission efficiency and device performance. Herein, we report the synergistic enhancement of NIR emission in a CsPbCl3 host through co-doping with Yb3+/Nd3+ ions for perovskite LEDs (PeLEDs). The co-doping of Yb3+/Nd3+ ions in a CsPbCl3 host resulted in enhanced NIR emission above 1000 nm, which is highly desirable for NIR optoelectronic applications. This cooperative energy transfer between Yb3+ and Nd3+ can enhance the overall efficiency of energy conversion. Furthermore, the PeLEDs incorporating the co-doped CsPbCl3/Yb3+/Nd3+ PeNCs as an emitting layer exhibited significantly enhanced NIR EL compared to the single doped PeLEDs. The optimized co-doped PeLEDs showed improved device performance, including increased EQE of 6.2% at 1035 nm wavelength and low turn-on voltage. Our findings highlight the potential of co-doping with Yb3+ and Nd3+ ions as a strategy for achieving synergistic enhancement of NIR emission in CsPbCl3 perovskite materials, which could pave the way for the development of highly efficient perovskite LEDs for NIR optoelectronic applications.

Strong violet emission from ultra-stable strontium-doped CsPbCl3 superlattices.

Among the lead halide perovskites, the photoluminescence quantum yields (PLQYs) of perovskite quantum dots (PQDs) in the violet region are the very lowest. This is an obstacle to the optical applications across the entire visible area based on perovskite materials. Herein, we report a novel strontium (Sr)-substitution along with chlorine passivation strategy to enhance the PLQYs of CsPbCl3 PQDs. We surprisingly found that when the molar ratio of Sr2+/Pb2+ = 0.1/0.9, CsSr0.1Pb0.9Cl3 PQDs exhibit strong single-color violet emission, which is attributed to the effective passivation of chlorine defects. We further found spontaneous self-assembly of PQDs into highly emissive PSCs from the precursor in a highly concentrated solution. Moreover, by dilution of these PSCs, a few small PQD aggregates can be regained, which is similar to the PQDs formed at lower concentrations. Benefiting from the superior collective properties of individual PQDs, these highly fluorescent CsSr0.1Pb0.9Cl3 PSCs can maintain good stability even when directly immersed in water or exposed to illumination.

A versatile approach for shape-controlled synthesis of ultrathin perovskite nanostructures.

Very recently, ultrathin perovskite nanostructures, with the advantages of perovskite and ultrathin properties, have received an enormous level of interest due to their many fascinating properties, such as a strong quantum confinement effect and a large specific surface area. In spite of this incredible success of perovskite nanocrystals (NCs), the development of perovskite NCs is still in its infancy, and the production of high-quality ultrathin perovskite nanostructures has been a hot topic in the fields of nanoscience and nanotechnology. Herein, we demonstrate that ultrathin CsPbBr3 perovskite nanosheets (NSs) can be obtained by a simple mixing of precursor-ligand complexes under ambient conditions. It was found that the formation of NSs is ascribed to the stepwise self-assembly of the initially formed different types of ultrathin nanostructures. Due to the disappearance of grain boundaries and protection of branched ligands, these NSs exhibit enhanced optical properties compared to other types of samples. This direct synthesis method opens up a promising road for the synthesis of ultrathin NSs and guides the fabrication of other ultrathin nanostructures.

Trioctylphosphine-Assisted Pre-protection Low-Temperature Solvothermal Synthesis of Highly Stable CsPbBr3/TiO2 Nanocomposites.

Lead halide perovskite quantum dots (PQDs) are reported as a promising branch of perovskites, which have recently emerged as a field in luminescent materials research. However, before the practical applications of PQDs can be realized, the problem of poor stability has not yet been solved. Herein, we propose a trioctylphosphine (TOP)-assisted pre-protection low-temperature solvothermal synthesis of highly stable CsPbBr3/TiO2 nanocomposites. Due to the protection of branched ligands and the lower temperature of shell formation, these TOP-modified CsPbBr3 PQDs are successfully incorporated into a TiO2 monolith without a loss of fluorescence intensity. Because the excellent nature of both parent materials is preserved in CsPbBr3/TiO2 nanocomposites, it is found that the as-prepared CsPbBr3/TiO2 nanocomposites not only display excellent photocatalytic activity but also yield improved PL stability, enabling us to build highly stable white light-emitting diodes and to photodegrade rhodamine B.

Pressure-Driven Transformation of CsPbBrI2 Nanoparticles into Stable Nanosheets in Solution through Self-Assembly.

Very recently, two-dimensional (2D) perovskite nanosheets (PNSs), taking the advantages of perovskite as well as the 2D structure properties, have received an enormous level of interest throughout the scientific community. In spite of this incredible success in perovskite nanocrystals (NCs), self-assembly of many nanostructures in metal halide perovskites has not yet been realized, and producing highly efficient red-emitting PNSs remains challenging. In this Letter, we show that by using CsPbBrI2 perovskite nanoparticles (NPs) as a building block, PNSs can emerge spontaneously under high ambient pressure via template-free self-assembly without additional complicated operation. It is found that the formation of PNSs is ascribed to the high pressure that provides the driving force for the alignment of NPs in solution. Because of the disappearance of the grain boundaries between the adjacent NPs and increased crystallinity, these PNSs self-assembled from NPs exhibit enhanced properties compared to the initial NPs, including higher PL intensity and remarkable chemical stability toward light and water.