Optimization of two-phase synthesis of Fe-hydrochar for arsenic removal from drinking water: Effect of temperature and Fe concentration.

Arsenic-contaminated water is a global concern that demands the development of cost-effective treatments to ensure a safe drinking water supply for people worldwide. In this paper, we report the optimization of a two-phase synthesis for producing a hydrochar core from olive pomace to serve as support for the deposition of Fe-hydroxide, which is the active component in As(V) removal. The operating conditions considered were the initial concentration of Fe in solution in the hydrothermal treatment (phase I) and the temperature of Fe precipitation (phase II). The obtained samples were characterized for their elemental composition, solid yield, mineral content (Fe and K), phenol release, As(V) sorption capacity, and sorbent stability. Correlation analysis revealed that higher Fe concentrations (26.8 g/L) ensured better carbonization during hydrothermal treatment, increased arsenic removal, reduced concentrations of phenols in the final liquid, and improved stability of the sorbent composite. On the other hand, the temperature during Fe precipitation (phase II) can be maintained at lower levels (25-80 °C) since higher temperatures yielded lower adsorption capacity. Regression analysis demonstrated the significance of the main effects of the parameters on sorption capacity and provided a model for selecting operating conditions (Fe concentration and phase II temperature) to obtain composite sorbents with tailored sorption properties.

Two-phase synthesis of Fe-loaded hydrochar for As removal: The distinct effects of initial pH, reaction time and Fe/hydrochar ratio.

Hydrothermal carbonization (HTC) is a promising technology for producing char material (hydrochar) from waste biomass. In the present work, a two-stage process was applied and optimized to obtain a composite Fe-loaded hydrochar effective in removing arsenic from water. The first stage of carbonization of the biomass in acid conditions was followed by loading Fe3O4 in the second stage into the hydrochar by alkaline co-precipitation. The effect on the kinetics and on the final yield of HTC induced by a variation of the initial acid pH (5.6, 2.0, and 0.5) was tested. Biomass hydrolysis initially decreased the hydrochar yield and released soluble organic species, responsible for the observed pH variation. This effect was more remarkable at the lower initial pH tested. Soluble organic compounds eventually underwent polymerization, with secondary char formation, an inversion of the pH trend and an increase of hydrochar yield and C%. The final pH attained was linearly related to the hydrochar C%, O/C ratio, and initial pH. Better carbonization performances were achieved at pH = 0.5, 200 °C, and 30 min reaction time, which resulted in 53% mass yield and 72 C%. This value is larger than those previously reported for processes conducted at higher temperatures, and it shows how the addition of acid allows working at lower operative temperatures. Fe loading gave better yields at lower hydrochar concentrations, producing an adsorbent with up to 74% Fe3O4, which adsorbed 2.67 mg/g arsenic. Its adsorption capacity was remarkably affected by the stirring method used, indicating that particle-to-particle interactions considerably influence the process. This effect should be better studied for improved applications in fixed-bed columns.

Sustainable Bioactive Packaging Based on Thermoplastic Starch and Microalgae.

This study combines the use of corn starch and Tetradesmus obliquus microalgae for the production of antioxidant starch films as flexible packaging material. Starch was plasticized with glycerol and blended with 1 w% polyallylamine chosen as an agent to modify the film physical properties. The addition of polyallylamine improved film water stability and water vapor transmission rate as well as mechanical stiffness and tenacity. The dried Tetradesmus obliquus microalgae, which showed an EC50 value of 2.8 mg/mg DPPH (2.2-Diphenyl-1-picrylhydrazyl radical), was then used as antioxidant filler. The addition of microalgae provided the films with good antioxidant activity, which increased with microalgae content increasing. To our knowledge, this is the first study reporting the development of sustainable bioactive packaging films composed of almost 100% starch, and follows the European union's goals on plastics strategy concerning the promotion of bio-based, compostable plastics and the setting up of approaches to prevent food waste with a simple plastic packaging.

Production of an iron-coated adsorbent for arsenic removal by hydrothermal carbonization of olive pomace: Effect of the feedwater pH.

The removal of arsenic from water by adsorption is currently hindered by the elevated cost of conventional adsorbent materials. To overcome this limit, an innovative iron-coated adsorbent was produced by hydrothermal carbonization (170 °C, 30 min) of olive pomace, an inexpensive byproduct of the olive oil production. Hydrothermal carbonization experiments were performed starting from olive pomace dispersions in solutions with acidic, neutral and alkaline pH, in presence and absence of FeCl3. Acidic conditions improved the carbonization, ensuring reduced H/C and O/C ratios, and increased the adsorbent stability. However, acidic pH yielded unsatisfactory iron coating, with only 32% of the iron dissolved in the initial solution transferred to the produced hydrochar. Under alkaline pH, 96% of the iron in the feedwater was, in contrast, stably dispersed over the hydrochar surface, giving the highest maximum arsenic adsorption capacity (4.1 mg/g). However, alkaline pH promoted biomass hydrolysis, causing the loss of 60% and 87% of the total C and N, respectively, and reducing the stability of the produced hydrochar. A two-stage process was tested to overcome these issues, including hydrothermal carbonization under acidic pH with FeCl3, followed by the addition of NaOH. This process prevented biomass hydrolysis yielding a stable hydrochar. However, as compared to the one-stage alkaline synthesis, the two-stage process produced an hydrochar with reduced arsenic adsorption capacity (1.4 mg/g), indicating that biomass hydrolysis could positively influence hydrochar adsorption characteristics, possibly by increasing the specific surface area. Indications are then provided on how to optimize the two-stage process in order to produce a hydrochar with both satisfactory stability and arsenic adsorption capacity.

Solvent versus thermal treatment for glass recovery from end of life photovoltaic panels: Environmental and economic assessment.

End of life photovoltaic panels of different technologies (poly crystalline Si, amorphous Si, and CdTe) were treated mechanically in pilot scale by single shaft shredder minimizing the production of fine fractions below 0.4 mm (<18% weight). Grounded material was sieved giving: an intermediate fraction (0.4-1 mm) of directly recoverable glass (18% weight); a coarse fraction (which should be further treated for encapsulant removal), and fine fractions of low-value glass (18%), which can be treated by leaching for the removal of metal impurities. Encapsulant removal from coarse fraction was successfully performed by solvent treatment using cyclohexane at 50 °C for 1 h giving high-grade glass (52% weight), which can be reused for panel production. Experimental results of solvent treatment were compared with those from thermal treatment by economic analysis and Life Cycle Assessment, denoting in both cases the advantages of solvent treatment in recovering high-value glass.

Extraction of Carotenoids and Fat-Soluble Vitamins from Tetradesmus Obliquus Microalgae: An Optimized Approach by Using Supercritical CO2.

In recent years, great attention has been focused on rapid, selective, and environmentally friendly extraction methods to recover pigments and antioxidants from microalgae. Among these, supercritical fluid extraction (SFE) represents one of the most important alternatives to traditional extraction methods carried out with the use of organic solvents. In this study, the influence of parameters such as pressure, temperature, and the addition of a polar co-solvent in the SFE yields of carotenoids and fat-soluble vitamins from T. obliquus biomass were evaluated. The highest extraction of alpha-tocopherol, gamma-tocopherol, and retinol was achieved at a pressure of 30 MPa and a temperature of 40 °C. It was observed that overall, the extraction yield increased considerably when a preliminary step of sample pre-treatment, based on a matrix solid phase dispersion, was applied using diatomaceous earth as a dispersing agent. The use of ethanol as a co-solvent, under certain conditions of pressure and temperature, resulted in selectively increasing the yields of only some compounds. In particular, a remarkable selectivity was observed if the extraction was carried out in the presence of ethanol at 10 MPa and 40 °C: under these conditions, it was possible to isolate menaquinone-7, a homologous of vitamin K2, which, otherwise, cannot not recovered by using traditional extraction procedures.

Quantification of Tetradesmus obliquus (Chlorophyceae) cell size and lipid content heterogeneity at single-cell level.

Much of our current knowledge of microbial growth is obtained from studies at a population level. Driven by the realization that processes that operate within a population might influence a population's behavior, we sought to better understand Tetradesmus obliquus (formerly Scenedesmus obliquus) physiology at the cellular level. In this work, an accurate pretreatment method to quantitatively obtain single cells of T. obliquus, a coenobia-forming alga, is described. These single cells were examined by flow cytometry for triacylglycerol (TAG), chlorophyll, and protein content, and their cell sizes were recorded by coulter counter. We quantified heterogeneity of size and TAG content at single-cell level for a population of T. obliquus during a controlled standard batch cultivation. Unexpectedly, variability of TAG content per cell within the population increased throughout the batch run, up to 400 times in the final stage of the batch run, with values ranging from 0.25 to 99 pg · cell-1 . Two subpopulations, classified as having low or high TAG content per cell, were identified. Cell size also increased during batch growth with average values from 36 to 70 µm3  · cell-1 ; yet cell size variability increased only up to 16 times. Cell size and cellular TAG content were not correlated at the single-cell level. Our data show clearly that TAG production is affected by cell-to-cell variation, which suggests that its control and better understanding of the underlying processes may improve the productivity of T. obliquus for industrial processes such as biodiesel production.

Rapid Estimation of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Composition Using ATR-FTIR.

A great research effort is involved in polyhydroxyalkanoates (PHAs) production and characterization since they are an attractive degradable polyester family that potentially could substitute oil-based polymers. This is due to two main key factors: their production is sustainable, being that they are produced by microorganisms possibly fed by organic waste-derived products, and they are degradable. Moreover, PHAs' thermal and mechanical properties could be tuned by varying their monomeric composition through the proper selection of microorganism feedstock and bioreactor operative conditions. Hence, a rapid and facile determination of the PHA chemical structure by widely available instrumentation is useful. As an alternative to the standard gas-chromatographic method, a new procedure for the composition determination of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P3HBV), the most common PHA copolymer, by attenuated total reflection FTIR (ATR-FTIR) is presented. It is based on the linear dependence of selected and normalized absorption band intensity with the molar fraction of repeating units. To break free from the crystallinity variability, which affects the result reproducibility and data scattering, the polymer sample was rapidly quenched from the melt directly on the surface of the ATR internal reflection element and analyzed. The data obtained from 14 samples with a molar fraction of 3-hydroxybutyrate repeating units (X3HB) ranging from 0.15 to 1 were analyzed. According to preliminary analyses, the normalized intensity of two absorption bands was selected to develop a calibration method able to predict X3HB of unknown samples and to evaluate the related uncertainty through prediction intervals of inverse regression. The proposed method proves to be useful for an easy and rapid estimation of P3HBV composition.

Decomposition of Deep Eutectic Solvent Aids Metals Extraction in Lithium-Ion Batteries Recycling.

The application of deep eutectic solvents (DESs) to dissolve metal oxides in lithium-ion batteries (LIBs) recycling represents a green technological alternative to the mineral acids employed in hydrometallurgical recycling processes. However, DESs are much more expensive than mineral acids and must be reused to ensure economic feasibility of LIB recycling. To evaluate DES reusability, the role of the choline chloride-ethylene glycol DES decomposition products on metal oxides dissolution was investigated. The temperatures generally applied to carry on this DES leaching induced the formation of decomposition products that ultimately improved the ability to dissolve LIB metal oxides. The characterization of DES decomposition products revealed that the improved metal dissolution was mainly determined by the formation of Cl3 - , which was proposed to play a pivotal role in the oxidative dissolution of LIB metal oxides.

Regeneration of Exhausted Palladium-Based Membranes: Recycling Process and Economics.

The aim of the present work is the recycling treatment of tubular α-Al2O3-supported ceramic membranes with a Pd/Ag selective layer, employed in hydrogen production with integrated CO2 capture. A nitric acid leaching treatment was investigated, and recovered ceramic supports were characterized, demonstrating their suitability for the production of novel efficient membranes. The main objective was the metal dissolution that preserved the support integrity in order to allow the recovered membrane to be suitable for a new deposition of the selective layer. The conditions that obtained a satisfactory dissolution rate of the Pd/Ag layer while avoiding the support to be damaged are as follows: nitric acid 3 M, 60 °C and 3.5 h of reaction time. The efficiency of the recovered supports was determined by nitrogen permeance and surface roughness analysis, and the economic figures were analysed to evaluate the convenience of the regeneration process and the advantage of a recycled membrane over a new membrane. The experimentation carried out demonstrates the proposed process feasibility both in terms of recycling and economic results.

Extracellular and intracellular phenol production by microalgae during photoautotrophic batch cultivation.

Understanding the mechanisms of phenol production by microalgae can contribute to the development of microalgal biorefinery processes with higher economic and environmental sustainability. However, little is known about how phenols are produced and accumulate during microalgal cultivation. In this study, both extracellular and intracellular phenol production by two microalgal strains (Tetradesmus obliquus and Chlorella sp.) were investigated throughout a conventional photoautotrophic batch cultivation. The highest intracellular phenol content (10-25 mg g-1) and productivity (12-18 mg L-1 d-1) were attained for both strains in the first part of the batch, indicating a positive relation with nutrient availability and biomass productivity. Extracellular phenol production was 2-20 fold lower than intracellular phenols, but reached up to 27 mg L-1 for T. obliquus and 13 mg L-1 for Chlorella sp. The latter finding highlights relevant issues about the management of the exhausted culture medium, due to likely antimicrobial effects.

Valorization of polymeric fractions and metals from end of life photovoltaic panels.

The increase in the annual flux of the end-of-life photovoltaic panels (EoL-PVPs) imposed the development of effective recycling strategies to reach EU regulation targets (i.e. 80% recycling; 85% recovery, starting from August 2018). The recycling targets in a PVP are generally glass, photovoltaic cell and metals, while no scientific paper or patent addressed polymeric fractions recycling and recovery, i.e. encapsulant polymer (EVA) and backsheet (Tedlar), starting from preliminarily milled EoL-PVPs. In the present study an optimization following the solvent treatment operation of the basic Photolife process (demonstrated at pilot scale), was proposed (lab scale) and validated (micropilot scale), focusing on polymers separation and metals recovery. The optimization was performed by testing 4 different processes. Specifically, the selectivity of the filtration operation (subsequent the solvent treatment) on polymers separation grade was evaluated, demonstrating that Tedlar can be effectively separated from EVA residues. Moreover, in comparison to the basic Photolife, a further operation was introduced treating thermally the EVA residues (containing the PV cell). The metal extraction yields highlighted the effectiveness of that strategy in comparison with direct extraction from the uncombusted EVA residues. Processing 100 Kg of crushed material, 0.03 Kg of Ag, 45.5 Kg of high value glass, 10 Kg of Al scraps and 1.2 Kg of metallic filaments can be recovered. Thanks to the optimization the recycling rate of the implemented process grew up to 82% (75% during demonstration of the basic Photolife process), while the recovery was estimated at 94%. Remarkably, these rates get over with EU Directive.

Two-Dimensional Restructuring of Cu2O Can Improve the Performance of Nanosized n-TiO2/p-Cu2O Photoelectrodes under UV-Visible Light.

p-Cu2O/n-TiO2 photoanodes were produced by electrodeposition of octahedral p-type Cu2O nanoparticles over n-type TiO2 nanotubes. The photoresponse of the composite p-n photoanodes was evaluated in photoelectrochemical cells operating at "zero-bias" conditions under either visible or UV-vis irradiation. In both operating conditions, the produced electrodes invariably followed the p-n-based photoanode operations but exhibited lower photoelectrochemical performance as compared to the bare n-TiO2 photoanode under UV-vis light. The reported experimental analysis evidenced that such decreased photoactivity is mainly induced by the scarce efficiency of the nanosized p-n interfaces upon irradiation. To overcome such limitation, a restructuring of the originally electrodeposited p-Cu2O was promoted, following a photoelectrochemical post-treatment strategy. p-Cu2O, restructured in a 2D leaf-like morphology, allowed reaching an improved photoelectrochemical performance for the p-n-based photoanode under UV-vis light. As compared to the bare n-TiO2 behavior, such improvement consisted of photoanodic currents up to three times larger. An analysis of the mechanisms driving the transition from compact (∼100 nm) octahedral p-Cu2O to wider (∼1 µm) 2D leaf-like structures was performed, which highlighted the pivotal role played by the irradiated n-TiO2 NTs.

Upcycling Real Waste Mixed Lithium-Ion Batteries by Simultaneous Production of rGO and Lithium-Manganese-Rich Cathode Material.

The direct synthesis of high-value products from end-of-life Li-ion batteries (LIBs), avoiding the complex and costly separation of the different elements, can be reached through a competitive recycling strategy. Here, we propose the simultaneous synthesis of reduced graphene oxide (rGO) and lithium-manganese-rich (Li1.2Mn0.55Ni0.15Co0.1O2 - LMR) cathode material from end-of-life LIBs. The electrode powder recovered after LIBs mechanical pretreatment was directly subjected to the Hummers' method. This way, quantitative extraction of the target metals (Co, Ni, Mn) and oxidation of graphite to graphene oxide (GO) were simultaneously achieved, and a Mn-rich metal solution resulted after GO filtration, owing to the use of KMnO4 as an oxidizing agent. This solution, which would routinely constitute a heavy-metal liquid waste, was directly employed for the synthesis of Li1.2Mn0.55Ni0.15Co0.1O2 cathode material. XPS measurements demonstrate the presence in the synthesized LMR of Cu2+, SO4 2-, and SiO4 4- impurities, which were previously proposed as effective doping species and can thus explain the improved electrochemical performance of recovered LMR. The GO recovered by filtration was reduced to rGO by using ascorbic acid. To evaluate the role of graphite lithiation/delithiation during battery cycling on rGO production, the implemented synthesis procedure was replicated starting from commercial graphite and from the graphite recovered by a consolidated acidic-reductive leaching procedure for metals extraction. Raman and XPS analysis disclosed that cyclic lithiation/delithiation of graphite during battery life cycle facilitates the graphite exfoliation and thus significantly increases conversion to rGO.

Effect of Ca2+ concentration on Scenedesmus sp. growth in heterotrophic and photoautotrophic cultivation.

The influence of Ca2+ concentration on the growth of the microalga Scenedesmus sp. in heterotrophic and photoautotrophic cultivations was investigated. Heterotrophic growth was induced by the addition of olive mill wastewaters (9% v·v-1) to the culture. Variations in the calcium concentration affected differently biomass production depending on whether microalgae were cultivated under heterotrophic or photoautotrophic regime. In photoautotrophic regime, increasing the calcium concentration from 20 to 230mg⋅L-1 decreased maximum cell concentration and growth rate. In heterotrophic cultivation, cell concentration and growth rate decreased with Ca2+ concentration increasing from 20 to 80mg⋅L-1 but then increased with Ca2+ concentration increasing to 230mg⋅L-1. Increasing calcium concentration invariably promoted cell aggregation. The precipitation of calcium phosphates can explain the decreasing growth rate and cell concentration attained with increasing calcium concentration, while the influence of Ca2+ concentration on the adsorption of phenols on suspended solids can explain the enhanced growth attained at large Ca2+ concentration under heterotrophic regime. Implications of the illustrated results for industrial scale application of microalgae are thoroughly discussed.

Leaching of electrodic powders from lithium ion batteries: Optimization of operating conditions and effect of physical pretreatment for waste fraction retrieval.

Experimental results of leaching tests using waste fractions obtained by mechanical pretreatment of lithium ion batteries (LIB) were reported. Two physical pretreatments were performed at pilot scale in order to recover electrodic powders: the first including crushing, milling, and sieving and the second granulation, and sieving. Recovery yield of electrodic powder was significantly influenced by the type of pretreatment. About 50% of initial LIB wastes was recovered by the first treatment (as electrodic powder with size <0.5mm, Sample 1), while only 37% of powder with size <1mm (Sample 2) can be recovered by the second treatment. Chemical digestion put in evidence the heterogeneity of recovered powders denoting different amounts of Co, Mn, and Ni. Leaching tests of both powders were performed in order to determine optimized conditions for metal extraction. Solid/liquid ratios and sulfuric acid concentrations were changed according to factorial designs at constant temperature (80°C). Optimized conditions for quantitative extraction (>99%) of Co and Li from Sample 1 are 1/10g/mL as solid/liquid ratio and +50% stoichiometric excess of acid (1.1M). Using the same solid/liquid ratio, +100% acid excess (1.2M) is necessary to extract 96% of Co and 86% of Li from Sample 2. Best conditions for leaching of Sample 2 using glucose are +200% acid excess (1.7M) and 0.05M glucose concentration. Optimized conditions found in this work are among the most effective reported in the literature in term of Co extraction and reagent consumption.

Physical and chemical treatment of end of life panels: An integrated automatic approach viable for different photovoltaic technologies.

Different kinds of panels (Si-based panels and CdTe panels) were treated according to a common process route made up of two main steps: a physical treatment (triple crushing and thermal treatment) and a chemical treatment. After triple crushing three fractions were obtained: an intermediate fraction (0.4-1mm) of directly recoverable glass (17%w/w); a coarse fraction (>1mm) requiring further thermal treatment in order to separate EVA-glued layers in glass fragments; a fine fraction (<0.4mm) requiring chemical treatment to dissolve metals and obtain another recoverable glass fraction. Coarse fractions (62%w/w) were treated thermally giving another recoverable glass fraction (52%w/w). Fine fractions can be further sieved into two sub-fractions: <0.08mm (3%w/w) and 0.08-0.4mm (22%w/w). Chemical characterization showed that 0.08-0.4mm fractions mainly contained Fe, Al and Zn, while precious and dangerous metals (Ag, Ti, Te, Cu and Cd) are mainly present in fractions <0.08mm. Acid leaching of 0.08-0.4mm fractions allowed to obtain a third recoverable glass fraction (22%w/w). The process route allowed to treat by the same scheme of operation both Si based panels and Cd-Te panels with an overall recycling rate of 91%.

Non-electrostatic surface complexation models for protons and lead(II) sorption onto single minerals and their mixture.

Potentiometric titrations and lead sorption tests were conducted using muscovite, clinochlore, hematite, goethite, quartz, and a mixture of these same minerals. Mechanistic models were developed to represent and interpret these data. The aim was isolating the specific contribution of each mineral in proton and lead binding. Acid-base properties of each single mineral as well as their mixture were represented by discrete models, which consider the dissociation of n monoprotic sites (n-site/n-K(H) models). A one-site/one-K(H) model (logK(H1) = 10.69) was chosen for quartz (dissociation of SiOH edge hydroxyl groups). Goethite and hematite (FeOH groups) were represented by the same one-site/one-K(H) model (logK(H1) = 10.35). Three-site/three-K(H) models were used for muscovite (logK(H1) = 4.18; logK(H2) = 6.65; logK(H3) = 9.67) and clinochlore (logK(H1) = 3.84; logK(H2) = 6.57; logK(H3) = 9.71) assuming that SiOH and AlOH of the aluminosilicate matrix dissociate in the acid-neutral pH range while SiOH groups of quartz inclusions dissociate in the basic range. Similarly, the mixture of these minerals was represented by a three-site/three-K(H) model (logK(H1) = 3.39; logK(H2) = 6.72; logK(H3) = 10.82). According to crossed comparisons with single minerals, the first two sites of the mixture were associated with the aluminosilicate matrix (SiOH and AlOH respectively) and the third site with iron oxides (FeOH) and quartz groups. Additivity of proton binding in the mixture was demonstrated by simulating the mixture's titration curve. A unified model for the entire set of titration curves (single minerals and mixture) was also developed introducing a three-peak distribution function for proton affinity constants. Experimental data for lead sorption onto the mixture and individual minerals in 3-5 pH range denoted the competition between protons and metallic ions. The entire set of lead isotherms (individual mineral and mixture data) was represented adequately by a unified model taking into account both monodentate and bidentate complexes with the three active sites (additivity of lead binding). Experimental data of metal distribution in solid and liquid phases were successfully simulated by implementing the protonation and the surface complexation constants into the database of a dedicated software for chemical equilibria.

Cobalt products from real waste fractions of end of life lithium ion batteries.

An innovative process was optimized to recover Co from portable Lithium Ion Batteries (LIB). Pilot scale physical pretreatment was performed to recover electrodic powder from LIB. Co was extracted from electrodic powder by a hydrometallurgical process including the following main stages: leaching (by acid reducing conditions), primary purification (by precipitation of metal impurities), solvent extraction with D2EPHA (for removal of metal impurities), solvent extraction with Cyanex 272 (for separation of cobalt from nickel), cobalt recovery (by precipitation of cobalt carbonate). Tests were separately performed to identify the optimal operating conditions for precipitation (pH 3.8 or 4.8), solvent extraction with D2EHPA (pH 3.8; Mn/D2EHPA=4; 10% TBP; two sequential extractive steps) and solvent extraction with Cyanex 272 (pH 3.8; Cyanex/Cobalt=4, 10% TBP, one extractive step). The sequence of optimized process stages was finally performed to obtain cobalt carbonate. Products with different degree of purity were obtained depending on the performed purification steps (precipitation with or without solvent extraction). 95% purity was achieved by implementation of the process including the solvent extraction stages with D2EHPA and Cyanex 272 and final washing for sodium removal.

Biosorption of protons and heavy metals onto olive pomace: modelling of competition effects.

Heavy metal biosorption onto solid wastes from olive oil production plants, olive pomace, has been investigated. Acid-base properties of the active sites of olive pomace were determined by potentiometric titrations and represented by a continuous model accounting for two main kinds of active sites. Competition among protons and heavy metals in solution was considered by performing biosorption tests at different equilibrium pH with single (Cu and Cd) and binary metal systems (Cu-Cd). Both Langmuir extensions and non-ideal competitive adsorption models (NICA models) can be used to represent experimental data of Cu and Cd biosorption in single metal systems at different equilibrium pH. Nevertheless only NICA models, accounting for site heterogeneity and non-ideal adsorption of the different species simultaneously present in solution, can adequately simulate the competition among Cu and Cd in binary metal systems by using the parameters fitted to single system data.