Stimuli-responsive electrospun nanofibers for drug delivery, cancer therapy, wound dressing, and tissue engineering.

The stimuli-responsive nanofibers prepared by electrospinning have become an ideal stimuli-responsive material due to their large specific surface area and porosity, which can respond extremely quickly to external environmental incitement. As an intelligent drug delivery platform, stimuli-responsive nanofibers can efficiently load drugs and then be stimulated by specific conditions (light, temperature, magnetic field, ultrasound, pH or ROS, etc.) to achieve slow, on-demand or targeted release, showing great potential in areas such as drug delivery, tumor therapy, wound dressing, and tissue engineering. Therefore, this paper reviews the recent trends of stimuli-responsive electrospun nanofibers as intelligent drug delivery platforms in the field of biomedicine.

Folic Acid-Chitosan Oligosaccharide Conjugates Decorated Nanodiamond as Potential Carriers for the Oral Delivery of Doxorubicin.

Oral administration of doxorubicin (DOX) is preferred but challenged owing to poor permeability in the gastrointestinal tract (GIT), efflux of P-glycoprotein, short residence time in the intestine, and rapid hydrolysis. Herein, folic acid-chitosan oligosaccharide conjugate (FA-COS)-modified hydroxylated nanodiamond (ND-OH) was designed to enhance the oral bioavailability of DOX. The carboxyl surface of ND was modified into hydroxyl terminal group to increase the colloidal stability of the system under different pH conditions in GIT. FA-COS modification could prolong retention time, endow the drug with sustained release properties, and actively target intestinal FA receptors. In contrast to DOX/ND-OH, the particle size of DOX/ND-OH/FA-COS increased from 189.5 ± 2.8 to 224.5 ± 1.4 nm, and the zeta potential reversed from - 9.1 ± 0.2 to 14.8 ± 0.4 mV. At 48 h, DOX/ND-OH and DOX/ND-OH/FA-COS released 69.07 ± 5.70% and 35.87 ± 5.64%, respectively. FA-COS modification effectively enhanced the cytotoxicity and intracellular uptake of ND-OH/DOX by Caco-2 cells and prolonged intestinal retention in rats. The internalization of DOX/ND-OH and DOX/ND-OH/FA-COS was mainly mediated by energy-dependent clathrin- and caveolae-mediated endocytosis pathways. Pharmacokinetic study demonstrated that the AUC0-t of DOX/ND-OH and DOX/ND-OH/FA-COS was enhanced by 3.94- and 6.08-fold compared to DOX solution, respectively. These results illustrated that DOX/ND-OH/FA-COS could be an effective strategy to enhance the oral bioavailability of DOX.

Design of ROS-Responsive Hyaluronic Acid-Methotrexate Conjugates for Synergistic Chemo-Photothermal Therapy for Cancer.

Combining chemotherapy with photothermal therapy (PTT) for cancer treatment could overcome the inherent limitations of both single-modality chemotherapy and PTT. However, the obstacle of accurate drug delivery to tumor sites based on chemo-photothermal remains challenging. This article describes development of a reactive oxygen species (ROS)-responsive hyaluronic acid-based nanoparticle to overcome these drawbacks. Herein, HA-TK-MTX (HTM) was synthesized by a ROS-responsive cleaved thioketal moiety linker (TK) of methotrexate (MTX) and hyaluronic acid (HA). Through hydrophobic interaction and π-π stacking interaction, a photothermal agent IR780 was integrated into the HTM, and the IR780/HTM nanoparticles (IHTM NPs) were obtained. The IHTM NPs show high photostability, excellent photothermal performance, remarkable tumor-targeting ability, and ROS sensibility. Due to the accurate drug delivery ability and superior chemo-photothermal treatment effect of IHTM NPs, the tumor inhibition rate reached 70.95% for 4T1 tumor-bearing mice. This work serves as a precedent for the chemo-photothermal therapy of cancer by rationally designing ROS-responsive nanoparticles.

Optimization and Characterization of Low-Molecular-Weight Chitosan-Coated Baicalin mPEG-PLGA Nanoparticles for the Treatment of Cataract.

The present study was to evaluate the potential effectiveness of low-molecular-weight chitosan-coated baicalin methoxy poly(ethylene glycol)-poly(d,l-lactic-co-glycolic acid) (mPEG-PLGA) nanoparticles (BA LCH NPs) for the treatment of cataract. mPEG-PLGA NPs were optimized by the Box-Behnken design and the central composite design based on the encapsulation efficiency and drug loading. Then, the BA LCH NPs were characterized based on morphology, particle size, and zeta potentials. The analytical data of differential scanning calorimetry, X-ray diffraction, and transmission electron microscopy depicted the drug excipient compatibility. In vitro, we evaluated cell viability, cellular uptake, potential ocular irritation, transcorneal permeability, and the precorneal retention of BA LCH NPs. In vivo, the chronic selenium cataract model was selected to assess the therapeutic effect of BA LCH NPs. The size of BA LCH NPs was within the range from 148 to 219 nm and the zeta potential was 19-25 mV. Cellular uptake results showed that the fluorescence intensity of the preparations in each group increased with time, and the fluorescence intensity of the LCH NP group was significantly higher than that of the solution group. The optimized BA LCH NPs improved precorneal residence time without causing eye irritation and also showed a sustained release of BA through the cornea for effective management of cataract. Also, fluorescence tracking on the rabbit cornea showed increased corneal retention of the LCH NPs. In addition, the results of therapeutic efficacy demonstrated that BA LCH NPs can significantly reduce the content of malondialdehyde and enhanced the activities of catalase, superoxide dismutase, and glutathione peroxidase, which was comparable to positive control and better than the BA solution group. Thus, it can be inferred that the BA LCH NPs are a promising drug delivery system for enhancing the ophthalmic administration of BA to the posterior segment of the eye and improving cataract symptoms.

Nanodiamond-based multifunctional platform for oral chemo-photothermal combinational therapy of orthotopic colon cancer.

Combination therapy system has become a promising strategy for achieving favorable antitumor efficacy. Herein, a novel oral drug delivery system with colon localization and tumor targeting functions was designed for orthotopic colon cancer chemotherapy and photothermal combinational therapy. The polydopamine coated nanodiamond (PND) was used as the photothermal carrier, through the coupling of sulfhydryl-polyethylene glycol-folate (SH-PEG-FA) on the surface of PND to achieve systematic colon tumor targeting, curcumin (CUR) was loaded as the model drug, and then coated with chitosan (CS) to achieve the long gastrointestinal tract retention and colon localization functions to obtain PND-PEG-FA/CUR@CS nanoparticles. It has high photothermal conversion efficiency and good photothermal stability and exhibited near-infrared (NIR) laser-responsive drug release behavior. Folate (FA) modification effectively promotes the intracellular uptake of nanoparticles by CT26 cells, and the combination of chemotherapy and photothermal therapy (CT/PTT) can enhance cytotoxicity. Compared with free CUR group, nanoparticles prolonged the gastrointestinal tract retention time, accumulated more in colon tumor tissues, and exhibited good photothermal effect in vivo. More importantly, the CT/PTT group exhibited satisfactory tumor growth inhibition effects with good biocompatibility in vivo. In summary, this oral drug delivery system is an efficient platform for chemotherapy and photothermal combinational therapy of orthotopic colon cancer.

Construction and Evaluation of Hyaluronic Acid-Coated Flurbiprofen-Layered Double Hydroxide Ocular Drug Delivery System.

In this study, flurbiprofen (FB) was selected as the model drug, and hyaluronic acid-coated flurbiprofen-layered double hydroxide ophthalmic drug delivery system (HA-FB-LDH) was designed and prepared. In this system, the model drug flurbiprofen was intercalated in layered double hydroxide and coated with hyaluronic acid (HA), so as to prolong the corneal residence time and increase the corneal permeability of the drug. Layered double hydroxide (LDH) was prepared by alcohol-water coprecipitation method. Through single factor investigation, the optimum preparation conditions were obtained as follows: The Mg/Al ratio was 2:1, the reaction pH was 11.0, the hydrothermal reaction time was 24 h, and the hydrothermal reaction temperature was 100°C. Under these conditions, the particle size of LDH was 116.4 ± 0.8 nm, the potential was 42.2 ± 1.2 mV, and a relatively regular crystal structure could be had. Then FB was intercalated into the LDH layer to prepare flurbiprofen-layered double hydroxide (FB-LDH). In the end, HA-FB-LDH was prepared by the stirring-ultrasonic method, in which through prescription screening, the molecular weight of HA was 200-400 kDa and the concentration of HA solution was 1.25 mg·mL -1, the final particle size of HA-FB-LDH was 185.8 ± 3.3 nm, and potential of - 31.4 ± 0.7 mV. The successful loading of FB and the coating of HA were verified by XRD, FTIR, TGA, TEM, and other characterization methods. The results of in vitro stability experiment indicated that the coating of HA could significantly enhance the stability of LDH in the presence of electrolytes. The in vitro release results suggested that the cumulative release amounts of FB-LDH and HA-FB-LDH within 12 h were 92.99 ± 0.37% and 74.82 ± 0.29% respectively, showing a certain sustained release effect. At the same time, the release mechanism of FB-LDH was preliminarily explored by in vitro release experiment, which proved that the release mechanism of FB-LDH was mainly ion exchange. The results of in vivo ocular irritation experiments demonstrated that the ophthalmic preparation studied in this paper was safe and non-irritating. The results of tear pharmacokinetics in rabbits showed that the area under the curve(AUC), the average residence time (MRT), and the highest concentration (Cmax) in tears in the HA-FB-LDH group were 4.43, 4.48, and 2.27 times higher than those in eye drops group separately. Furthermore, the AUC of the HA-FB-LDH group was 1.48 times higher than that of the FB-LDH group. The above results suggested that HA-FB-LDH could improve the precorneal residence time. The results of aqueous humor pharmacokinetics in rabbits indicated that the AUC, MRT, and maximum concentration (Cmax) in aqueous humor in the HA-FB-LDH group were 6.88, 2.15, and 4.08 times of those in the eye drop group respectively. Additionally, the AUC and MRT of the HA-FB-LDH group were 1.55 and 1.63 times those of the FB-LDH group separately. These mentioned findings verified that HA-FB-LDH could enhance the corneal permeability of the drug. The fluorescent substance-fluoresce isothiocyanate (FITC) was substituted for FB intercalation in LDH for in vitro tissue imaging study of rabbits, whose results stated clearly that FITC-LDH and HA-FITC-LDH could both prolong the precorneal residence time of drugs, and HA-FITC-LDH could increase the corneal permeability of the drug to a certain extent. To sum up, HA-FB-LDH, which can overcome the shortcomings of low bioavailability of traditional eye drops to a certain degree, is a safe and effective ophthalmic drug delivery system.

A Novel Carbon Dots/Thermo-Sensitive In Situ Gel for a Composite Ocular Drug Delivery System: Characterization, Ex-Vivo Imaging, and In Vivo Evaluation.

We developed a potential composite ocular drug delivery system for the topical administration of diclofenac sodium (DS). The novel carbon dot CDC-HP was synthesized by the pyrolysis of hyaluronic acid and carboxymethyl chitosan through a one-step hydrothermal method and then embedded in a thermosensitive in situ gel of poloxamer 407 and poloxamer 188 through swelling loading. The physicochemical characteristics of these carbon dots were investigated. The results of the in vitro release test showed that this composite ocular drug delivery system (DS-CDC-HP-Gel) exhibited sustained release for 12 h. The study of the ex vivo fluorescence distribution in ocular tissues showed that it could be used for bioimaging and tracing in ocular tissues and prolong precorneal retention. Elimination profiles in tears corresponded to the study of ex vivo fluorescence imaging. The area under the curve of DS in the aqueous humor in the DS-CDC-HP-Gel group was 3.45-fold that in the DS eye drops group, indicating a longer precorneal retention time. DS-CDC-HP with a positive charge and combined with a thermosensitive in situ gel might strengthen adherence to the corneal surface and prolong the ocular surface retention time to improve the bioavailability. This composite ocular delivery system possesses potential applications in ocular imaging and drug delivery.

Three-Dimensional (3D)-Printed Zero-Order Released Platform: a Novel Method of Personalized Dosage Form Design and Manufacturing.

In 2017, there are 451 million people with diabetes worldwide. These figures were expected to increase to 693 million by 2045. The research and development of hypoglycemic drugs has become a top priority. Among them, sulfonylurea hypoglycemic drugs such as glipizide are commonly used in non-insulin-dependent type II diabetes. In order to adapt to the wide range of hypoglycemic drugs and the different individual needs of patients, this topic used glipizide as a model drug, and prepared glipizide preparations with 3D printing technology. The purpose of this study was to investigate the prescription applicability and control-release behavior of structure and explore the application prospects of 3D printing personalized drug delivery formulations. This article aims to establish a production process for personalized preparations based on 3D printing technology. The process is easy to obtain excipients, universal prescriptions, flexible dosages, exclusive customization, and integrated automation. In this paper, the UV method was used to determine the in vitro release and content analysis method of glipizide; the physical and chemical properties of the glipizide were investigated. The established analysis method was inspected and evaluated, and the experimental results met the methodological requirements. Glipizide controlled-release tablets were prepared by the semisolid extrusion (SSE) method using traditional pharmaceutical excipients combined with 3D printing technology. The formulation composition, in vitro release, and printing process parameters of the preparation were investigated, and the final prescription and process parameters (traveling speed 6.0-7.7 mm/s and extruding speed 0.0060-0.0077 mm/s) were selected through comprehensive analysis. The routine analysis results of the preparation showed that the performance of the preparation meets the requirements. In order for 3D printing technology to play a better role in community medicine and telemedicine, this article further explored the universality of the above prescription and determined the scope of application of prescription drugs and dosages. Glipizide, gliclazide, lornoxicam, puerarin, and theophylline were used as model drugs, and the range of drug loading percentage was investigated. The results showed when the solubility of the drug is 9.45 -8.34 mg/mL, and the drug loading is 3-43%; the release behavior is similar.

Enhanced Oral Delivery of Curcumin via Vitamin E TPGS Modified Nanodiamonds: a Comparative Study on the Efficacy of Non-covalent and Covalent Conjugated Strategies.

Despite that either non-covalent or covalent attachment of hydrophilic polymers or surfactants onto nanodiamonds (NDs) could overcome the shortcomings of being a drug delivery system, it is hard to draw a definite conclusion which strategy is more effective. Hence, with the purpose of comparing the influence of different coating approach of NDs on the oral delivery efficiency of water-insoluble model drug curcumin (CUR), NDs were firstly modified with D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) via non-covalent or covalent conjugation method, and then loaded with CUR (CUR@NDs-COOH/TPGS or CUR@NDs-TPGS). In comparison with the core-shell-structured CUR@NDs-COOH/TPGS, CUR@NDs-TPGS were irregular in shape with dense TPGS film, and exhibited smaller size, more negatively potential, and higher drug loading efficiency. The covalent connection group also showed higher anti-cancer activity, cellular uptake, and permeability through the Caco-2 cell monolayers, as well as favorable distribution, penetration, and retention in rat intestines. The oral bioavailability study in rats demonstrated that CUR@NDs-TPGS showed significantly greater Cmax and AUC0-t in contrast with CUR suspension and the TPGS-coated ones, respectively. The findings illustrated that covalent grafting TPGS onto the surface of NDs possesses better efficacy and biocompatibility on oral delivery of poorly soluble drug CUR than pristine and non-covalent coated nanoparticles.

Synthesis, Formulation, and Characterization of Doxorubicin-Loaded Laponite/Oligomeric Hyaluronic Acid-Aminophenylboronic Acid Nanohybrids and Cytological Evaluation against MCF-7 Breast Cancer Cells.

As a synthetic clay material, laponite RDS (LR) was investigated as an effective drug carrier as a result of the special nanodisk structure together with the negative-charged surface to achieve enhanced cellular uptake and targeted delivery. In this research work, the synthesized oligomeric hyaluronic acid-aminophenylboronic acid (oHA-APBA) was entangled onto LR nanodisks to fabricate a valid targeted platform for breast cancer therapy. Briefly, through the formation of amide bonds, 3-APBA was connected to the chain of oHA with a substituted ratio of 4.0 ± 0.2% to synthesize oHA-APBA copolymer. Thereafter, doxorubicin (DOX) was inserted into the interlayer space of LR by the way of the ion exchange process, followed by an assembly with oHA-APBA as a targeted protection layer. The satisfactory drug encapsulation efficiency (> 80%) and narrow size distribution were achieved. The in vitro drug release study demonstrated the release of DOX from DOX@LR/oHA-APBA was sustained and acid dependent. In addition, after fitting the drug cumulative release of DOX@LR/oHA-APBA under different pH conditions with several kinetic models, it was identified that drug release from DOX@LR/oHA-APBA nanohybrids at pH 5.0 was mainly dependent on both diffusion and ion exchange effects. However, under the condition of pH 7.4, the drug was most efficiently released by diffusion effect. Importantly, DOX@LR/oHA-APBA showed remarkable cellular uptake and intracellular drug distribution in MCF-7 cells, which were consistent with inhibitory ability against MCF-7 cells. Hence, the high DOX loading capacity and enhanced cellular tracking can enlighten LR/oHA-APBA as an effective drug delivery carrier for breast cancer therapy.

A Non-innocent Magnesium Organoclay-Based Drug Vehicle for Improving the Cancer Therapy Effect of Methotrexate.

A synthetic, dispersible magnesium aminoclay (MgAC) was synthesized in the present study. Besides, structural and spectroscopic detections were conducted to investigate the MgAC nanoclay. With a poor aqueous solubility, methotrexate (MTX) has been applied as a valid antitumor agent in recent years. In our research, an unobtrusive sol-gel process was carried out to manufacture the MgAC-MTX nanohybrids through entrapment of MTX over MgAC in situ. The final product was capable of desquamating and thus dispersed in water, equably. In comparison with rough MTX, the MgAC-MTX nanocomposite with a preferable treatment efficacy against MCF-7 cells was mainly attributed to the preeminent enhanced aqueous solubility, controlled release and the increased cellular uptake capacity. Moreover, with excellent anticancer function and hypotoxicity as vindicated in vivo, the MgAC-MTX nanohybrid was supposed to own the potency in the application of malignant tumors cure as a valid nanomedicine. It turned out that, by virtue of its high bioavailability, the MgAC-MTX nanohybrids with high bioavailability is deserving of further study for the treatment of cancers.

Thermal Extrusion 3D Printing for the Fabrication of Puerarin Immediate-Release Tablets.

Thermal extrusion (TE) 3D printing is a thermoplastic semisolid-based rapid prototyping process, which is capable of building complex structures. The aim of this study was to manufacture rapid-release puerarin tablets without solvent through TE 3D printing. Novel rapid-release tablets were fabricated with polyethylene glycol (PEG 4000) as the carrier at appropriate puerarin/PEG 4000 ratios, assessed through differential scanning calorimetry (DSC), solubility, and dissolution tests. The novel structures of 3D-printed tablets with five different values were formed by printing paths, which established a flexible way of adjusting in vitro drug release. An obvious acceleration (85% of cumulative release about 7.5 min at the soonest) was observed for the tablets with internal structural design. It was inferred that puerarin formed simple eutectic mixtures with PEG 4000 and that puerarin dispersed into the carrier based on DSC and X-Ray powder diffraction (XRD). This highlights the combined advantage of PEG as a soluble polymer with TE 3D printing and provides a suitable system for rapid puerarin release.

Structure-Based Gastro-Retentive and Controlled-Release Drug Delivery with Novel 3D Printing.

In the present contribution, the aim is to explore and establish a way in which 3D printing and gastro-retentive drug delivery systems (GRDDSs) are combined (focusing on inner structure innovation) to achieve extended and stable gastro-retention and controlled-release of drug. Three digital models diverse in construction were designed and substantialized by a pressure-assisted microsyringe (PAM) 3D printer. Preparations were characterized by means of DSC, XRD, FTIR, and SEM. In vitro buoyancy study and in vivo gamma scintigraphy method were conducted to validate gastro-retention property of these innovative preparations in vitro/in vivo respectively. Release kinetic model was established and release mechanism was discussed. Tablets manufactured under certain range of parameters (intersecting angle, full filling gap) were tight and accurate in shape. Tablets printed with specific parameters (full filling gap, 50%; nozzle extrusion speed, 0.006 mm/s; layer height, 0.4 mm; compensation value, 0.25; quantity of layers, 15; outline printing value, 2) exhibited satisfactory in vitro (10-12 h)/in vivo (8-10 h) retention ability and possessed stable 10-12 h controlled-release quality. In general, 3D printing has tremendous advantage over conventional fabrication technique in intricate drug delivery systems and will be widely employed in pharmacy.

Flexibility of 3D Extruded Printing for a Novel Controlled-Release Puerarin Gastric Floating Tablet: Design of Internal Structure.

The objective of this study was to investigate the development of a novel puerarin gastric floating system with a concentric annular internal pattern by a 3D extrusion-based printing technique and to explore the flexibility of turning the release behavior through the design of the internal structure. The composition consisted of the conventional sustained-release pharmaceutical excipients without addition of foaming agent or light materials. First, the proper alcohol/water proportion was selected for the binding agent. The desired drug release behaviors and good floating properties were obtained either through modification of the formulation composition or adjustment of the internal structure. In vitro, the printed tablets were evaluated for drug release, mechanical properties, lag time, and floating duration time. The in vivo behaviors of the formulations were noted at certain time intervals through assessment of the radiographic pictures of healthy volunteers. The gastric retention time in the 3D-printed tablet was approximately 6 h in vivo. Results indicated these puerarin gastric floating 3D-printed tablets had great potential to achieve good gastric residence time and controlled release. Therefore, 3D extrusion-based printing appears to be appropriate for the production of oral administration systems, owing to its flexibility and the great floating ability and controlled-release capacity of its products.

Study of controlled-release floating tablets of dipyridamole using the dry-coated method.

Dipyridamole (DIP), having a short biological half-life, has a narrow absorption window and is primarily absorbed in the stomach. So, the purpose of this study was to prepare controlled-release floating (CRF) tablets of dipyridamole by the dry-coated method. The influence of agents with different viscosity, hydroxypropylmethylcellulose (HPMC) and polyvinylpyrollidon K30 (PVP K30) in the core tablet and low-viscosity HPMC and PVP K30 in the coating layer on drug release, were investigated. Then, a study with a three-factor, three-level orthogonal experimental design was used to optimize the formulation of the CRF tablets. After data processing, the optimized formulation was found to be: 80 mg HPMC K4M in the core tablet, 80 mg HPMC E15 in core tablet and 40 mg PVP K30 in the coating layer. Moreover, an in vitro buoyancy study showed that the optimized formulation had an excellent floating ability and could immediately float without a lag time and this lasted more than 12 h. Furthermore, an in vivo gamma scintigraphic study showed that the gastric residence time of the CRF tablet was about 8 h.

In vitro and in vivo evaluation of controlled-release matrix tablets of highly water-soluble drug applying different mw polyethylene oxides (PEO) as retardants.

The aim of the work presented is to prepare a controlled-release hydrophilic matrix tablet (CMT) controlling release of highly water-soluble drug applying pure combination of high- and low-Mw PEO as matrix materials, to avoid the lag time of drug release, and to overcome incomplete release in later stages. The influences of types and amounts of different Mw PEOs used, drug loading, pH of release medium and agitation rate on drug release were evaluated. The study of uptake and erosion of matrix was conducted and mechanism of improving drug release was discussed. In vivo pharmacokinetics of the CMT and reference preparation self-made controlled-release osmotic pump tablets (COPT) were performed in beagle dogs. The optimized formulation containing 43% PEO WSR 303 and 32% PEO N750 showed a zero order release from 1 h to 12 h. In vivo results demonstrated that the CMT had similar AUC0-48 h and Cmax with the COPT but smaller Tmax than the COPT and provided a more stable therapeutic concentration compared to the COPT. In conclusion, hydrophilic matrix tablet combining only different Mw PEOs as matrix materials had very good potential to be developed into a controlled-release drug delivery system for highly water-soluble drug. Besides, its manufacturing processes were succinct which would be preferable for modern medicine industry.

A novel ion-activated in situ gelling ophthalmic delivery system based on κ-carrageenan for acyclovir.

The aim of this study was to prepare and evaluate ion-activated in situ gel ophthalmic drug delivery system based on κ-carrageenan (KC), using acyclovir as a model drug, hydroxypropyl methylcellulose (HPMC) as the viscosity agent and hydroxypropyl-ß-cyclodextrin (HP-ß-CD) as the penetration enhancer. The two ternary phase diagrams exhibited the effect of K+ and Ca2+ on the sol-to-gel transition, which turned out that KC was more sensitive to K+. The optimal ophthalmic matrix (prepared from KC and HPMC) was optimized with in vitro drug release test. The apparent permeability coefficient of acyclovir under 2% HP-ß-CD was found to have dramatically increased (2.16-ploid) than that of conventional eye drops (p < .05). The ion-activated in situ gel based on KC significantly delayed drug release and its bioavailability could be improved in comparison with the conventional eye drops. Hence, it has the potential to be a novel kind of ocular drug delivery system.

Galactosylated Chitosan-Functionalized Mesoporous Silica Nanoparticle Loading by Calcium Leucovorin for Colon Cancer Cell-Targeted Drug Delivery.

Targeted drug delivery to colon cancer cells can significantly improve the efficiency of treatment. We firstly synthesized carboxyl-modified mesoporous silica nanoparticles (MSN⁻COOH) via two-step synthesis, and then developed calcium leucovorin (LV)-loaded carboxyl-modified mesoporous silica nanoparticles based on galactosylated chitosan (GC), which are galectin receptor-mediated materials for colon-specific drug delivery systems. Both unmodified and functionalized nanoparticles were characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR), nitrogen sorption, and dynamic light scattering (DLS). Drug release properties and drug loading capacity were determined by ultraviolet spectrophotometry (UV). LV@MSN⁻COOH/GC had a high LV loading and a drug loading of 18.07%. In vitro, its release, mainly by diffusion, was sustained release. Cell experiments showed that in SW620 cells with the galectin receptor, the LV@MSN⁻COOH/GC metabolized into methyl tetrahydrofolic acid (MTHF) and 5-fluorouracil (5-FU)@MSN⁻NH2/GC metabolized into FdUMP in vivo. MTHF and 5-fluoro-2'-deoxyuridine 5'-monophosphate (FdUMP) had combined inhibition and significantly downregulated the expression of thymidylate synthase (TS). Fluorescence microscopy and flow cytometry experiments show that MSN⁻COOH/GC has tumor cell targeting, which specifically recognizes and binds to the galectin receptor in tumor cells. The results show that the nano-dosing system based on GC can increase the concentrations of LV and 5-FU tumor cells and enhance their combined effect against colon cancer.

Analysis of the Literature and Patents on Solid Dispersions from 1980 to 2015.

Background: Solid dispersions are an effective formulation technique to improve the solubility, dissolution rate, and bioavailability of water-insoluble drugs for oral delivery. In the last 15 years, increased attention was focused on this technology. There were 23 marketed drugs prepared by solid dispersion techniques. Objective: This study aimed to report the big picture of solid dispersion research from 1980 to 2015. Method: Scientific knowledge mapping tools were used for the qualitative and the quantitative analysis of patents and literature from the time and space dimensions. Results: Western Europe and North America were the major research areas in this field with frequent international cooperation. Moreover, there was a close collaboration between universities and industries, while research collaboration in Asia mainly existed between universities. The model drugs, main excipients, preparation technologies, characterization approaches and the mechanism involved in the formulation of solid dispersions were analyzed via the keyword burst and co-citation cluster techniques. Integrated experimental, theoretical and computational tools were useful techniques for in silico formulation design of the solid dispersions. Conclusions: Our research provided the qualitative and the quantitative analysis of patents and literature of solid dispersions in the last three decades.

Preparation, Characterization and In Vitro / In Vivo Evaluation of Oral Time-Controlled Release Etodolac Pellets.

The objective of this study was to prepare time-controlled release etodolac pellets to facilitate drug administration according to the body's biological rhythm, optimize the drug's desired effects, and minimize adverse effects. The preparation consisted of three laminal layers from center to outside: the core, the swelling layer, and the insoluble polymer membrane. Factors influenced the core and the coating films were investigated in this study. The core pellets formulated with etodolac, lactose, and sodium carboxymethyl starch (CMS-Na) were prepared by extrusion-spheronization and then coated by a fluidized bed coater. Croscarmellose sodium (CC-Na) was selected as the swelling agent, and ethyl cellulose (EC) as the controlled release layer. The prepared pellets were characterized by scanning electron microscopy and evaluated by a dissolution test and a pharmacokinetic study. Compared with commercial available capsules, pharmacokinetics studies in beagle dogs indicated that the prepared pellets release the drug within a short period of time, immediately after a predetermined lag time. A good correlation between in vitro dissolution and in vivo absorption of the pellets was exhibited in the analysis.