Laser-Induced Blood Coagulation for Surgical Application: A Scoping Review.

There is a lack of evidence-based reviews on the effects of laser irradiation on blood coagulation in the literature, despite a large number of clinical trials. We therefore evaluated the available evidence on laser irradiation parameters used in coagulation of blood to optimize physical parameters. We performed a literature search for recent scientific studies indexed between 2017 and 2023 using the databases of PubMed and ScienceDirect. Articles were selected based on defined inclusion and exclusion criteria, and 78 publications in total were eventually included in this scoping review. The following were found to produce significant benefits in blood coagulation for surgical application: (1) dentistry and oral surgeries: 980 nm, 27 s, 2 W, 1502.7 W/cm2, 26.5 J, 622 J/cm2, 400 µm; (2) urogenital disorders: 532 nm, 4 s, 40 W, 10600 W/cm2, 1.3 J, 424 J/cm2, 600 µm; (3) ophthalmic disorders: 810 nm, 1 s, 1 W, 3540 W/cm2, 0.75 J, 1326 J/cm2, 100 µm; (4) embryological surgeries: 1064 nm, 10 s, 25 W, 35400 W/cm2, 262.5 J, 371000 J/cm2, 332.5 µm; (5) dermatological disorders: 1064 nm, 20 W, 2440 W/cm2, 0.1 J, 24 J/cm2, 670 µm; (6) gastrointestinal disorders: 532 nm, 3 s, 20 W, 1051 W/cm2, 120 J, 26500 J/cm2, 760 µm; (7) neurological surgeries: 2.5 s, 1.5 W, 1035 W/cm2, 2 J, 1584 J/cm2, 385 µm; (8) pulmonary disorders: 1320 nm, 5s, 35 W, 12450 W/cm2, 250 J, 65000 J/cm2, 700 µm (9) cardiovascular disorders: 1064 nm, 16.5 s, 5 W, 1980.5 W/cm2, 900 J, 760 J/cm2, 400 µm. In conclusion, our scoping review identifies that combining data from all clinically heterogeneous studies suggests that laser irradiation reflects an effective method for inducing blood coagulation in several medical fields.

In vitro, ex vivo, and in vivo models for dental pulp regeneration.

Based on the concept of tissue engineering (Cells-Scaffold-Bioactive molecules), regenerative endodontics appeared as a new notion for dental endodontic treatment. Its approaches aim to preserve dental pulp vitality (pulp capping) or to regenerate a vascularized pulp-like tissue inside necrotic root canals by cell homing. To improve the methods of tissue engineering for pulp regeneration, numerous studies using in vitro, ex vivo, and in vivo models have been performed. This review explores the evolution of laboratory models used in such studies and classifies them according to different criteria. It starts from the initial two-dimensional in vitro models that allowed characterization of stem cell behavior, through 3D culture matrices combined with dental tissue and finally arrives at the more challenging ex vivo and in vivo models. The travel which follows the elaboration of such models reveals the difficulty in establishing reproducible laboratory models for dental pulp regeneration. The development of well-established protocols and new laboratory ex vivo and in vivo models in the field of pulp regeneration would lead to consistent results, reduction of animal experimentation, and facilitation of the translation to clinical practice.

Multiphoton Microscopy for Caries Detection with ICDAS Classification.

Dentin carious lesion is a dynamic process that involves demineralization and collagen denaturation. Collagen type I is the major protein in dentin and it has been investigated based on its optical properties. Multiphoton microscopy (MPM) is a nonlinear imaging technique that reveals the caries process using the collagen two-photon excitation fluorescence (2PEF) and its second-harmonic generation (SHG). Combining the histological and the International Caries Detection and Assessment System (ICDAS) classifications with nonlinear optical spectroscopy (NLOS), 2PEF and SHG intensities of enamel and dentin were highly altered during the caries process. It has been proven that the ratio SHG/2PEF is a relevant indicator of the organic matrix denaturation [Terrer et al.: J Dent Res 2016; 96: 574-579]. In the present study, a series of measurable signals is made to detect early stages of carious lesion according to the ICDAS classification and to explore the relationship between these measures and the ICDAS scale. Comparison of the efficiency of nonlinear optical signals for caries detection with the ICDAS classification is essential to evaluate their potential for clinical application. In our study, the use of the NLOS measured by MPM allowed us to monitor a quantitative parameter (SHG/2PEF ratio) according to the dentin carious lesion state (ICDAS and histological examination). Three coherent new groups were defined (ICDAS 0/1; ICDAS 2/3; ICDAS 4/5/6), where the carious process can be clearly described with a statistically significant decrease of the SHG/2PEF ratio.

Polyetheretherketone (PEEK) for medical applications.

Polyetheretherketone (PEEK) is a polyaromatic semi-crystalline thermoplastic polymer with mechanical properties favorable for bio-medical applications. Polyetheretherketone forms: PEEK-LT1, PEEK-LT2, and PEEK-LT3 have already been applied in different surgical fields: spine surgery, orthopedic surgery, maxillo-facial surgery etc. Synthesis of PEEK composites broadens the physicochemical and mechanical properties of PEEK materials. To improve their osteoinductive and antimicrobial capabilities, different types of functionalization of PEEK surfaces and changes in PEEK structure were proposed. PEEK based materials are becoming an important group of biomaterials used for bone and cartilage replacement as well as in a large number of diverse medical fields. The current paper describes the structural changes and the surface functionalization of PEEK materials and their most common biomedical applications. The possibility to use these materials in 3D printing process could increase the scientific interest and their future development as well.

Strategies For Immobilization Of Bioactive Organic Molecules On Titanium Implant Surfaces - A Review.

Numerous approaches have been used to improve the tissue-implant interface of titanium (Ti) and titanium alloy (Ti6Al4V). They all aim at increasing cell migration and attachment to the metal, preventing unspecific protein adsorption and improving post-implantation healing process. Promising methods for titanium and titanium alloy surface modification are based on the immobilization of biologically active organic molecules. New and interesting biochemical approaches to such surface modification include layer-by-layer deposition of polyelectrolyte films, phage display-selected surface binding peptides and self-assembled DNA monolayer systems. The present review summarizes the scientific information about these methods, which are at in vitro or in vivo development stages, and hopes to promote their future application in dental implantology and in oral and maxillofacial surgery.

In vitro investigation of fluorescence of carious dentin observed with a Soprolife® camera.

OBJECTIVES: Our aim was to determine the origin of the red fluorescence of carious dentine observed with the Soprolife® camera. METHODS: We conducted in vitro studies to evaluate the origin of the red fluorescence using acids and matrix metalloproteinase (MMP) to mimic caries and methylglycoxal (MGO) to evaluate the effect of glycation reactions on the red fluorescence. In every step of these models, we detected the changes of dentin photonic response with Soprolife® in daylight mode and in treatment mode. A Raman spectroscopy analysis was performed to determine the variations of the dentin organic during the in vitro caries processes. Raman microscopy was performed to identify change in the collagen matrix of dentine. RESULTS: The red fluorescence observed in carious dentine using a Soprolife® camera corresponds to the brownish color observed using daylight. Demineralization using nitric acid induces a loss of the green fluorescence of dentine. The red fluorescence of carious dentine is resistant to acid treatment. Immersion of demineralized dentine in MGO induces a change of color from white to orange-red. This indicates that the Maillard reaction contributes to lesion coloration. Immersion of demineralized dentine in an MMP-1 solution followed by MGO treatment results in a similar red fluorescence. Raman microspectroscopy analysis reveals accumulation of AGE's product in red-colored dentine. CONCLUSIONS: Our results provide important information on the origin of the fluorescence variation of dentine observed with the Soprolife® camera. We demonstrate that the red fluorescence of carious dentine is linked to the accumulation of Advanced Glycation End products (AGE). CLINICAL RELEVANCE: The study provides a new biological basis for the red fluorescence of carious dentine and reinforces the importance of the Soprolife® camera in caries diagnostics.

Biomechanical characterization of a fibrinogen-blood hydrogel for human dental pulp regeneration.

In dental practice, Regenerative Endodontic Treatment (RET) is applied as an alternative to classical endodontic treatments of immature necrotic teeth. This procedure, also known as dental pulp revitalization, relies on the formation of a blood clot inside the root canal leading to the formation of a reparative vascularized tissue similar to dental pulp, which would provide vitality to the affected tooth. Despite the benefit of this technique, it lacks reproducibility due to the fast degradation and poor mechanical properties of blood clots. This work presents a method for constructing a fibrinogen-blood hydrogel that mimics the viscoelastic properties of human dental pulp while preserving the biological properties of blood for application in RET. By varying the blood and fibrinogen concentrations, gels with different biomechanical and biological properties were obtained. Rheology and atomic force microscopy (AFM) were combined to study the viscoelastic properties. AFM was used to evaluate the elasticity of human dental pulp. The degradation and swelling rates were assessed by measuring weight changes. The biomimetic properties of the gels were demonstrated by studying the cell survival and proliferation of dental pulp cells (DPCs) for 14 days. The formation of an extracellular matrix (ECM) was assessed by multiphoton microscopy (MPM). The angiogenic potential was evaluated by an ex vivo aortic ring assay, in which the endothelial cells were observed by histological staining after migration. The results show that the Fbg-blood gel prepared with 9 mg ml-1 fibrinogen and 50% blood of the Fbg solution volume has similar elasticity to human dental pulp and adequate degradation and swelling rates. It also allows cell survival and ECM secretion and enhances endothelial cell migration and formation of neovessel-like structures.

Prevention and repair of orthodontically induced root resorption using ultrasound: a scoping review.

INTRODUCTION: This review summarizes the available recent literature on different mechanisms and parameters of pulsed ultrasound (US) that have been used during orthodontic treatments to prevent and repair root resorption. AREAS COVERED: A literature search was conducted between January (2002) and September (2022) in the following databases: PubMed, Google-Scholar, Embase, and The-Cochrane-Library. After exclusions, a total of 19 papers were included in the present review. The most used US parameters with positive outcomes were frequency of 1.5 MHz, pulse repetition frequency of 1000 Hz, output intensity of 30 mW/cm2, duration of application of 20 min and total number sessions were 14 with a repetition interval of 1 day. The suggested mechanisms induced by US were alteration of cementoblasts, osteoblasts, osteoclasts, alkaline-phosphatase (ALP), runt-related-gene-2 (Runx2), osteoprotegerin (OPG), type-I-collagen (Col-I), C-telopeptide-type-I-collagen (CTX-I), hepatocyte-growth-factor (HGF), bone morphogenetic protein-2 (BMP-2), cyclooxygenase-2 (Cox-2), calcium (Ca2+), receptor activator of nuclear factor-kappa-B ligand (RANKL), and receptor activator of nuclear factor-kappa-B (RANK). EXPERT OPINION: Understanding mechanisms and deciding which parameters of US that can be used during orthodontic treatment to prevent and repair root resorption is a great challenge. This work summarizes all the available data that can aid this process and suggest that US is an effective noninvasive method not only in prevention and repairing of orthodontic induced root resorption but also in accelerating teeth movement.

Improving dental epithelial junction on dental implants with bioengineered peptides.

Introduction: The functionalization of titanium (Ti) and titanium alloys (Ti6Al4V) implant surfaces via material-specific peptides influence host/biomaterial interaction. The impact of using peptides as molecular linkers between cells and implant material to improve keratinocyte adhesion is reported. Results: The metal binding peptides (MBP-1, MBP-2) SVSVGMKPSPRP and WDPPTLKRPVSP were selected via phage display and combined with laminin-5 or E-cadherin epithelial cell specific peptides (CSP-1, CSP-2) to engineer four metal-cell specific peptides (MCSPs). Single-cell force spectroscopy and cell adhesion experiments were performed to select the most promising candidate. In vivo tests using the dental implant for rats showed that the selected bi functional peptide not only enabled stable cell adhesion on the trans-gingival part of the dental implant but also arrested the unwanted apical migration of epithelial cells. Conclusion: The results demonstrated the outstanding performance of the bioengineered peptide in improving epithelial adhesion to Ti based implants and pointed towards promising new opportunities for applications in clinical practice.

Perceived sources of stress in fifth year dental students--a comparative study.

INTRODUCTION: The term "stress" refers to the effect of certain external factors (physical or mental) on the individual's physical and psychological health. Stress is very high in dental medicine. It may well be generated by the process of training in dentistry. During their training dental students express high levels of stress and considerable stress-related symptoms such as physical problems, depression, obsessive-compulsive and personality disorders. The perceived stress can be dependent on socio-cultural factors. The type of personality, gender, emotional intelligence and other individual characteristics may also influence the stress effects. AIM: To determine the main sources of stress in students during their dental training and compare the level of stress fifth-year dental students experience in the Faculty of Dental Medicine, Plovdiv, Bulgaria and the Faculty of Dentistry in Montpellier, France. METHODS: We recruited in the study fifth-year students from the Faculty of Dental Medicine in Plovdiv, Bulgaria and the Faculty of Dentistry in Montpellier, France. The modified Dental Environment Stress (DES) questionnaire was used to assess the effect of the various stressors. The questionnaire survey was conducted between February and March 2008. RESULTS: The living arrangements domain indicates higher levels of stress in Bulgarian students compared to their French counterparts with significant statistical difference for all factors. In personal factors the highest levels of stress were found with respect to the reduced holidays during school year and financial problems. Exams were the highest stressor in academic work domain and for the survey as a whole. In educational environment factors the stressors with the highest significance were the interactions with patients, academic environment (for French students) and risk of cross transmitted infections (for Bulgarian students). The high stress during clinical work is related to completing the assigned clinical workload quota and the shortage of time for clinical work. CONCLUSIONS: The students from both faculties report the highest mean levels of stress are related to examinations and clinical factors. Bulgarian students experienced higher mean levels of stress compared to their French colleges. The differences in mean stress levels are associated with socio-cultural factors and variations in educational curriculums at both dental faculties.

Confocal Raman data analysis of tufts and spindles at the human dentin-enamel junction.

OBJECTIVE: The aim of this article is to analyze the chemical mapping of tufts and spindles of the human dental enamel using confocal Raman microscopy measuring length, structuration and composition of spindles and tufts. DESIGN: we used Raman diffusion, based on the interaction between photons and optic phonons, to reveal chemical bound. Adult molars were selected and longitudinally sectioned. Areas of 120 * 120 µm were scanned near the dentin-enamel junction and grooves. Spectra were collected and phosphate and proteins peak intensities images were reconstructed, related to HPA concentration. Images of Phosphate (PO43-, 960 cm-1) and protein (CH, 2800/3000 cm-1) intensities have been reconstructed. K-mean cluster has been calculated to compare centroid spectra from enamel, dentin and tuft or spindle. RESULTS: intensity profile revealed spindles as less mineralized areas than enamel, from 5 to 10 µm large. In the groove of molar, long tufts were found, more than 150 µm. CONCLUSIONS: Confocal Raman microscopy is a very interesting tool to characterize chemically secondary structure of enamel. The size of a tuft in the groove allows us make the hypothesis that they could play a role in long term resilience of mechanical stress.

A Five-year Comparative Study of Perceived Stress Among Dental Students at Two European Faculties.

AIM: To compare the levels, causes and the impact of stress from cohort of fifthyear dental students in the Faculties of Dental Medicine in Plovdiv, Bulgaria and Montpellier, France. MATERIALS AND METHODS: The questionnaire we used comprised the modified version of the 56-item Dental Environment Stress (DES) questionnaire. It was completed by fifth-year undergraduate dental students in both faculties in 2011 and 2016, totaling 335 dental students. A five-point Likert scale was used to record the responses from the subjects. Statistical analysis was performed with STATA version 14.1 (StataCorp, College Station, USA) specialized software. RESULTS: The mean age of studied population was not significantly different between 2011 and 2016 (p=0.08). The common stress value per student was 1.74 (CI: 1.64; 1.84, range: 0.12; 4.50). It was higher in Plovdiv (1.79±0.81) than in Montpellier (1.63±0.66); it was statistically higher for girls (1.94±0.70) than for boys (1.49±0.77), and decreased between 2011 and 2016. A significant overall effect of the common mean stress was influenced by the town (p=0.008), year of study (p=0.003), gender (p=0.0001) and accommodation (p=0.01) of the student. CONCLUSION: Academicals and clinical factors of stress are prevailing stressors during education. The challenge is now to decrease the influence of both, without altering the quality of dental education. Regular discussions and debriefs about the clinical cases before and after clinical activity. Alternative methods of education and examination, such as interactive methods, could be considered in order to reduce the stress of theoretical exams.

Pulp Regeneration Concepts for Nonvital Teeth: From Tissue Engineering to Clinical Approaches.

Following the basis of tissue engineering (Cells-Scaffold-Bioactive molecules), regenerative endodontic has emerged as a new concept of dental treatment. Clinical procedures have been proposed by endodontic practitioners willing to promote regenerative therapy. Preserving pulp vitality was a first approach. Later procedures aimed to regenerate a vascularized pulp in necrotic root canals. However, there is still no protocol allowing an effective regeneration of necrotic pulp tissue either in immature or mature teeth. This review explores in vitro and preclinical concepts developed during the last decade, especially the potential use of stem cells, bioactive molecules, and scaffolds, and makes a comparison with the goals achieved so far in clinical practice. Regeneration of pulp-like tissue has been shown in various experimental conditions. However, the appropriate techniques are currently in a developmental stage. The ideal combination of scaffolds and growth factors to obtain a complete regeneration of the pulp-dentin complex is still unknown. The use of stem cells, especially from pulp origin, sounds promising for pulp regeneration therapy, but it has not been applied so far for clinical endodontics, in case of necrotic teeth. The gap observed between the hope raised from in vitro experiments and the reality of endodontic treatments suggests that clinical success may be achieved without external stem cell application. Therefore, procedures using the concept of cell homing, through evoked bleeding that permit to recreate a living tissue that mimics the original pulp has been proposed. Perspectives for pulp tissue engineering in the near future include a better control of clinical parameters and pragmatic approach of the experimental results (autologous stem cells from cell homing, controlled release of growth factors). In the coming years, this therapeutic strategy will probably become a clinical reality, even for mature necrotic teeth.

Investigation of the in vitro photocatalytic antibacterial activity of nanocrystalline TiO2 and coupled TiO2/Ag containing copolymer on the surface of medical grade titanium.

Antibacterial surfaces have been in the focus of research for years, driven by an unmet clinical need to manage an increasing incidence of implant-associated infections. The use of silver has become a topic of interest because of its proven broad-spectrum antibacterial activity and track record as a coating agent of soft tissue implants and catheters. However, for the time being, the translation of these technological achievements for the improvement of the antibacterial property of hard tissue titanium (Ti) implants remains unsolved. In our study, we focused on the investigation of the photocatalysis mediated antibacterial activity of silver (Ag), and Ti nanoparticles instead of their pharmacological effects. We found that the photosensitisation of commercially pure titanium discs by coating them with an acrylate-based copolymer that embeds coupled Ag/Ti nanoparticles can initiate the photocatalytic decomposition of adsorbed S. salivarius after the irradiation with an ordinary visible light source. The clinical isolate of S. salivarius was characterised with MALDI-TOF mass spectrometer, while the multiplication of the bacteria on the surface of the discs was followed-up by MTT assay. Concerning practical relevance, the infected implant surfaces can be made accessible and irradiated by dental curing units with LED and plasma arc light sources, our research suggests that photocatalytic copolymer coating films may offer a promising solution for the improvement of the antibacterial properties of dental implants.

A New Rat Model for Translational Research in Bone Regeneration.

The European Union (EU) directive 2010/63/EU on the protection of animals used for scientific purpose focused on reducing the number of animals and refinement of breeding. Animal studies are necessary to protect human health. Lots of animal models exist to study bone regeneration, but a reliable, well reproducible, and relatively inexpensive model with the possibility for multiple testing in the same animal is still missing. Rats may serve as good models for this due to the small animal size and good cost/benefit ratio. The present study aimed to develop a novel rat caudal vertebrae critical size defect model for bone regeneration and implant osseointegration studies The study was performed using Wistar rats with weight from 380 to 450 g. An incision was made on the dorsal side of the tail. After skin and muscles retractions, the vertebrae were exposed. Critical size defects for bone tissue engineering or implant placements for titanium body experiments were possible in each of the first four caudal vertebrae. Micro-computed tomography (CT) and histology were used to detect bone growth. There was no bone formation in the defects after 1 or 2 months of healing. When a calcium phosphate biomaterial was used (Bio-Oss®; Geistlich Pharma AG, Wolhusen, Switzerland), a good stability of the material in the defect was noted and bone growth was visible after 1 or 2 months. Results based on implant placement showed good primary stability after 3 months of healing. MicroCT showed integrated implant position through the vertebra. These results suggest that the rat caudal vertebrae may serve as a good new model for studying bone regeneration and implant osseointegration with the possibility of multiple testing within the same experimental animal and the potential to decrease number of experimental animals.

Initial stem cell adhesion on porous silicon surface: molecular architecture of actin cytoskeleton and filopodial growth.

The way cells explore their surrounding extracellular matrix (ECM) during development and migration is mediated by lamellipodia at their leading edge, acting as an actual motor pulling the cell forward. Lamellipodia are the primary area within the cell of actin microfilaments (filopodia) formation. In this work, we report on the use of porous silicon (pSi) scaffolds to mimic the ECM of mesenchymal stem cells from the dental pulp (DPSC) and breast cancer (MCF-7) cells. Our atomic force microscopy (AFM), fluorescence microscopy, and scanning electron microscopy (SEM) results show that pSi promoted the appearance of lateral filopodia protruding from the DPSC cell body and not only in the lamellipodia area. The formation of elongated lateral actin filaments suggests that pores provided the necessary anchorage points for protrusion growth. Although MCF-7 cells displayed a lower presence of organized actin network on both pSi and nonporous silicon, pSi stimulated the formation of extended cell protrusions.

Sprayed cells and polyelectrolyte films for biomaterial functionalization: the influence of physical PLL-PGA film treatments on dental pulp cell behavior.

Further development of biomaterials is expected as advanced therapeutic products must be compliant to good manufacturing practice regulations. A spraying method for building-up polyelectrolyte films followed by the deposition of dental pulp cells by spraying is presented. Physical treatments of UV irradiation and a drying/wetting process are applied to the system. Structural changes and elasticity modifications of the obtained coatings are revealed by atomic force microscopy and by Raman spectroscopy. This procedure results in thicker, rougher and stiffer film. The initially ordered structure composed of mainly α helices is transformed into random/ß-structures. The treatment enhanced dental pulp cell adhesion and proliferation, suggesting that this system is promising for medical applications.

Adhesion and proliferation of human mesenchymal stem cells from dental pulp on porous silicon scaffolds.

In regenerative medicine, stem-cell-based therapy often requires a scaffold to deliver cells and/or growth factors to the injured site. Porous silicon (pSi) is a promising biomaterial for tissue engineering as it is both nontoxic and bioresorbable. Moreover, surface modification can offer control over the degradation rate of pSi and can also promote cell adhesion. Dental pulp stem cells (DPSC) are pluripotent mesenchymal stem cells found within the teeth and constitute a readily source of stem cells. Thus, coupling the good proliferation and differentiation capacities of DPSC with the textural and chemical properties of the pSi substrates provides an interesting approach for therapeutic use. In this study, the behavior of human DPSC is analyzed on pSi substrates presenting pores of various sizes, 10 ± 2 nm, 36 ± 4 nm, and 1.0 ± 0.1 µm, and undergoing different chemical treatments, thermal oxidation, silanization with aminopropyltriethoxysilane (APTES), and hydrosilylation with undecenoic acid or semicarbazide. DPSC adhesion and proliferation were followed for up to 72 h by fluorescence microscopy, scanning electron microscopy (SEM), enzymatic activity assay, and BrdU assay for mitotic activity. Porous silicon with 36 nm pore size was found to offer the best adhesion and the fastest growth rate for DPSC compared to pSi comporting smaller pore size (10 nm) or larger pore size (1 µm), especially after silanization with APTES. Hydrosilylation with semicarbazide favored cell adhesion and proliferation, especially mitosis after cell adhesion, but such chemical modification has been found to led to a scaffold that is stable for only 24-48 h in culture medium. Thus, semicarbazide-treated pSi appeared to be an appropriate scaffold for stem cell adhesion and immediate in vivo transplantation, whereas APTES-treated pSi was found to be more suitable for long-term in vitro culture, for stem cell proliferation and differentiation.

Functional mapping of human sound and carious enamel and dentin with Raman spectroscopy.

The goals of this trial were, first, to produce a Raman mapping of decay and sound dentin samples, through accurate analysis of the Raman band spectra variations of mineral and organic components. The second goal was to confirm the correlation between the Raman signal and the signal of a fluorescent camera, by assaying the concentration of pentosidine and natural collagen fluorescent crosslink using reverse phase high-pressure liquid chromatography. The first correlation assumed a possible relationship between the signal observed with the camera and Raman spectroscopy. The second correlation assumed an association with the Maillard reaction. Absence of a correlation for this trial was that no association could be found between Raman spectra characteristics, fluorescence variation and the HPLC assay. Our results void this absence.

Multiphoton imaging of the dentine-enamel junction.

Multiphoton microscopy has been used to reveal structural details of dentine and enamel at the dentin-enamel junction (DEJ) based on their 2-photon excited fluorescence (2PEF) emission and second harmonic generation (SHG). In dentine tubule 2PEF intensity varies due to protein content variation. Intertubular dentin produces both SHG and 2PEF signals. Tubules are surrounded by a thin circular zone with a lower SHG signal than the bulk dentine and the presence of collagen fibers perpendicular to the tubule longitudinal axis is indicated by strong SHG responses. The DEJ appears as a low intensity line on the 2PEF images and this was never previously reported. The SHG signal is completely absent for enamel and aprismatic enamel shows a homogeneous low 2PEF signal contrary to prismatic enamel. The SHG intensity of mantle dentine is increasing from the dentine-enamel junction in the first 12 µm indicating a progressive presence of fibrillar collagen and corresponding to the more external part of mantle dentine where matrix metallo-proteases accumulate. The high information content of multiphoton images confirms the huge potential of this method to investigate tooth structures in physiological and pathological conditions.