Thermal Behaviors and Interaction Mechanism of Ammonium Dinitramide with Nitrocellulose.

The initial interaction mechanism is very important for the design and safety of nano-scale composite energetic materials composed of ammonium dinitramide (ADN) and nitrocellulose (NC). The thermal behaviors of ADN, NC and an NC/ADN mixture under different conditions were studied by using differential scanning calorimetry (DSC) with sealed crucibles, an accelerating rate calorimeter (ARC), a self-developed gas pressure measurement instrument and a DSC-thermogravimetry (TG)-quadrupole mass spectroscopy (MS)-Fourier transform infrared spectroscopy (FTIR) combined technique. The results show that the exothermic peak temperature of the NC/ADN mixture shifted forward greatly in both open and closed circumstances compared to those of NC or ADN. After 585.5 min under quasi-adiabatic conditions, the NC/ADN mixture stepped into the self-heating stage at 106.4 °C, which was much less than the initial temperatures of NC or ADN. The significant reduction in net pressure increment of NC, ADN and the NC/ADN mixture under vacuum indicates that ADN initiated the interaction of NC with ADN. Compared to gas products of NC or ADN, two new kinds of oxidative gases O2 and HNO2 appeared for the NC/ADN mixture, while NH3 and aldehyde disappeared. The mixing of NC with ADN did not change the initial decomposition pathway of either, but NC made ADN more inclined to decompose into N2O, which resulted in the formation of oxidative gases O2 and HNO2. The thermal decomposition of ADN dominated the initial thermal decomposition stage of the NC/ADN mixture, followed by the oxidation of NC and the cation of ADN.

CL-20-Based Cocrystal Energetic Materials: Simulation, Preparation and Performance.

The cocrystallization of high-energy explosives has attracted great interests since it can alleviate to a certain extent the power-safety contradiction. 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaaza-isowurtzitane (CL-20), one of the most powerful explosives, has attracted much attention for researchers worldwide. However, the disadvantage of CL-20 has increased sensitivity to mechanical stimuli and cocrystallization of CL-20 with other compounds may provide a way to decrease its sensitivity. The intermolecular interaction of five types of CL-20-based cocrystal (CL-20/TNT, CL-20/HMX, CL-20/FOX-7, CL-20/TKX-50 and CL-20/DNB) by using molecular dynamic simulation was reviewed. The preparation methods and thermal decomposition properties of CL-20-based cocrystal are emphatically analyzed. Special emphasis is focused on the improved mechanical performances of CL-20-based cocrystal, which are compared with those of CL-20. The existing problems and challenges for the future work on CL-20-based cocrystal are discussed.

Characterization of Electrospinning Prepared Nitrocellulose (NC)-Ammonium Dinitramide (ADN)-Based Composite Fibers.

Nanoscale composite energetic materials (CEMs) based on oxidizer and fuel have potential advantages in energy adjustment and regulation through oxygen balance (OB) change. The micro- and nanosized fibers based on nano nitrocellulose (NC)-ammonium dinitramide (ADN) were prepared by the electrospinning technique, and the morphology, thermal stability, combustion behaviors, and mechanical sensitivity of the fibers were characterized by means of scanning electron microscope (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), gas pressure measurement of thermostatic decomposition, laser ignition, and sensitivity tests. The results showed that the prepared fibers with fluffy 3D macrostructure were constructed by the overlap of micro/nanofibers with the energetic particles embedded in the NC matrix. The first exothermic peak temperature (Tp) of the samples containing ADN decreased by 10.1 °C at most compared to that of ADN, and the pressure rise time of all the samples containing ADN moved forward compared to that of the sample containing NC only. Furthermore, ADN can decrease the ignition delay time of NC-based fibers under atmosphere at room temperature from 33 ms to 9 ms and can enhance the burning intensity of NC-based fibers under normal pressure. In addition, compared to the single high explosive CL-20 or RDX, the mechanical sensitivities of the composite materials containing high explosive CL-20 or RDX were much decreased. The positive oxygen balance of ADN and the intensive interactions between ADN and NC can reduce the ignition delay time and promote the burning reaction intensity of NC-based composite fibers, while the mechanical sensitivities of composite fibers could be improved.

Effect of metal oxides on the light radiation intensity of Ba(NO3)2/Mg-containing pyrotechnic mixtures combustion.

Studying how to improve the performance of illuminating agents to meet the requirements of ammunition miniaturization of great importance. In this study, a simple method for increasing light radiation intensity through the adding of metal oxides was developed and tested. Results revealed that the metal oxides had a very strong effect on the light radiation intensity of the reaction system. Optical radiation intensity increased by 17.8%, - 5.4% and 25.9% after the addition 5% of MgO, Al2O3 and BaO to the Ba(NO3)2/Mg reaction system, respectively. This phenomenon may be related to the light radiation characteristics and reactivity of the metal oxide itself, as well as the temperature at which the added metal oxide can be excited to radiate light intensity.

Molecular dynamic simulation of performance of modified BAMO/AMMO copolymers and their effects on mechanical properties of energetic materials.

Based on molecular dynamic method, densities, mechanical behavior and mechanical performance of P(BAMO/ AMMO) (Polymer 1) and two novel modified P(BAMO/AMMO) (Polymer 2: containing amino group, Polymer 3: containing nitro group), and their effects on mechanical properties of four energetic materials are investigated, the main results are as follow: Polymer 2 (1.235 g/cm3, 240 ± 5 K) and Polymer 3: 1.281 g/cm3, 181 ± 3 K) possess higher densities and lower glass transition temperatures than Polymer 1 (1.229 g/cm3, 247 ± 4 K). The modification makes Polymer 1 difficult to expand, improves its mechanical properties, but has few effect on its diffusion coefficient at same temperature and state. In addition, three binders are compatible with TNT, HMX and CL-20, and may react with DNTF. All polymers particularly improve rigidity of four energetic materials, and enhance their ductility except Polymer 2 on TNT. The ability of Polymer 2 and Polymer 3 improving rigidity (except Polymer 3 on HMX) and ductility of TNT and HMX is inferior to that of Polymer 1, but it is contrary for CL-20 and DNTF (except Polymer 2 on rigidity of DNTF). Moreover, Polymer 2-based interfacial crystals exhibit higher rigidity than Polymer 3-based interfacial crystals.

Synthesis and biological evaluation of new berberine derivatives as cancer immunotherapy agents through targeting IDO1.

To discover small-molecule cancer immunotherapy candidates through targeting Indoleamine 2,3-dioxygenase 1 (IDO1), twenty-five new berberine (BBR) derivatives defined with substituents on position 3 or 9 were synthesized and examined for repression of IFN-γ-induced IDO1 promoter activities. Structure-activity relationship (SAR) indicated that large volume groups at the 9-position might be beneficial for potency. Among them, compounds 2f, 2i, 2n, 2o and 8b exhibited increased activities, with inhibition rate of 71-90% compared with BBR. Their effects on IDO1 expression were further confirmed by protein level as well. Furthermore, compounds 2i and 2n exhibited anticancer activity by enhancing the specific lysis of NK cells to A549 through IDO1, but not cytotoxicity. Preliminary mechanism revealed that both of them inhibited IFN-γ-induced IDO1 expression through activating AMPK and subsequent inhibition of STAT1 phosphorylation. Therefore, compounds 2i and 2n have been selected as IDO1 modulators for small-molecule cancer immunotherapy for next investigation.

[Investigation of CT guided percutaneous incisional needle biopsy in parapharyngeal region for suspicious nasopharyngeal carcinoma].

OBJECTIVE: To investigate the safety and efficacy of percutaneous incisional needle biopsy (PINB) in the parapharyngeal region under CT guide for highly suspicious nasopharyngeal carcinoma (NPC) or recurrence of NPC after radiotherapy. METHODS: PINB under CT guide was performed in 32 highly suspicious NPC or recurrence of NPC after radiotherapy through three puncture routes: posterolateral maxillary sinus fatty area, mandibular fossa area, and anterior-mastoid area. Specimens were fixed by 95% alcohol and then underwent pathologic examination. RESULTS: CT guided PINB was successfully performed in every patients with a technical successful rate of 100%. Definitive histopathologic diagnosis was obtained in 30 patients: squamous-cell carcinoma 21, undifferentiated carcinoma 5 and adenocarcinoma 4. The remaining two negative cases were confirmed as fibrosis after radiotherapy. Complications included persistent bleeding of puncture point in one patient and bloody sputum in 3 patients which subsided after symptomatic management. None of these patients was found to have symptoms of nerve injury caused by PINB procedure. CONCLUSION: The CT guided percutaneous incisional needle biopsy in parapharyngeal region through the above three puncture routes for highly suspicious nasopharyngeal carcinoma is safe, rapid and effective.