On-demand degrafting and the study of molecular weight and grafting density of poly(methyl methacrylate) brushes on flat silica substrates.

We report on degrafting of surface-anchored poly(methyl methacrylate) (PMMA) brushes from flat silica-based substrates using tetrabutylammonium fluoride (TBAF) and determining their molecular weight distribution (MWD) using size exclusion chromatography (SEC). The grafted PMMA layer was synthesized using surface-initiated atom transfer radical polymerization (SI-ATRP) of MMA for polymerization times ranging from 6 to 24 h. X-ray photoelectron spectroscopy, ellipsometry, and time-of-flight secondary ion mass spectrometry were employed in tandem to characterize the degrafting process. The SEC eluograms were fit to various polymer distributions, namely Zimm-Schulz, ATRP in continuous stirred tank reactor, Wesslau, Schulz-Flory, and Smith et al. The ATRP model gives the best fit to the experimental data. The dry PMMA brush thickness and the number-average molecular weight (obtained from the MWD) suggest that the grafting density of the PMMA grafts is independent of polymerization time, indicating well-controlled/living growth of MMA. The observed polydispersity index (PDI) was higher than that generally observed in bulk grown polymers under similar conditions, indicating an effect due to chain confinement and crowding. We detect small but noticeable dependence of the polymer brush grafting density on the inhibitor/catalyst ratio. Higher inhibitor/catalyst ratio offers better control with lower early terminations, which results in a small increase in the apparent grafting density of the chains.

Circulating microRNAs from early childhood and adolescence are associated with pre-diabetes at 18 years of age in women from the PMNS cohort.

With type 2 diabetes presenting at younger ages, there is a growing need to identify biomarkers of future glucose intolerance. A high (20%) prevalence of glucose intolerance at 18 years was seen in women from the Pune Maternal Nutrition Study (PMNS) birth cohort. We investigated the potential of circulating microRNAs in risk stratification for future pre-diabetes in these women. Here, we provide preliminary longitudinal analyses of circulating microRNAs in normal glucose tolerant (NGT@18y, N = 10) and glucose intolerant (N = 8) women (ADA criteria) at 6, 12 and 17 years of their age using discovery analysis (OpenArray™ platform). Machine-learning workflows involving Lasso with bootstrapping/leave-one-out cross-validation identified microRNAs associated with glucose intolerance at 18 years of age. Several microRNAs, including miR-212-3p, miR-30e-3p and miR-638, stratified glucose-intolerant women from NGT at childhood. Our results suggest that circulating microRNAs, longitudinally assessed over 17 years of life, are dynamic biomarkers associated with and predictive of pre-diabetes at 18 years of age. Validation of these findings in males and remaining participants from the PMNS birth cohort will provide a unique opportunity to study novel epigenetic mechanisms in the life-course progression of glucose intolerance and enhance current clinical risk prediction of pre-diabetes and progression to type 2 diabetes.

Promoting Pro-Endocrine Differentiation and Graft Maturation Following Surgical Resection of the Mouse Pancreas.

Type 1 diabetes (T1D) is an autoimmune disease, where insulin-producing ß-cells in the pancreas are inappropriately recognized and destroyed by immune cells. Islet transplantation is the most successful cell-based therapy for T1D individuals who experience frequent and severe life-threatening hypoglycemia. However, this therapy is extremely restricted owing to the limited availability of donor pancreas. In recent years, significant progress has been made in generating ß-cells from stem/progenitor cells using different approaches of in vitro differentiation. The insulin production from such in vitro generated ß-cells is still far less than that observed in islet ß-cells. We employed a novel strategy to improve the efficiency of progenitor cell differentiation by performing partial mouse pancreas resection after transplanting in vitro generated insulin-producing cells under the kidney capsule of these mice. Pancreas resection (pancreatectomy) has been shown to induce regenerative pathways, leading to regeneration of almost the entire resected pancreas over 3-5 weeks in mice. We found that in our method, regenerating mouse pancreas promotes better graft differentiation/maturation and insulin production from transplanted cells. In this chapter, we detail the protocols used for transplantation of in vitro differentiated cells in immunocompromised mice, partial pancreatectomy in host (NOD scid) mice, and assessment of graft function. We believe that our protocols provide a solid platform for further studies aimed at understanding growth/differentiation molecules secreted from regenerating pancreas that promote graft maturation.

Light-Induced Reversible Change of Roughness and Thickness of Photosensitive Polymer Brushes.

We investigate light-induced changes in thickness and roughness of photosensitive polymer brushes containing azobenzene cationic surfactants by atomic force microscopy (AFM) in real time during light irradiation. Because the cis-state of azobenzene unit requires more free volume than its trans counterpart, the UV light-induced expansion of polymer thin films associated with the trans-to-cis isomerism of azobenzene groups is expected to occur. This phenomenon is well documented in physisorbed polymer films containing azobenzene groups. In contrast, photosensitive polymer brushes show a decrease in thickness under UV irradiation. We have found that the azobenzene surfactants in their trans-state form aggregates within the brush. Under irradiation, the surfactants undergo photoisomerization to the cis-state, which is more hydrophilic. As a consequence, the aggregates within the brush are disrupted, and the polymer brush contracts. When subsequently irradiated with blue light the polymer brush thickness returns back to its initial value. This behavior is related to isomerization of the surfactant to the more hydrophobic trans-state and subsequent formation of surfactant aggregates within the polymer brush. The photomechanical function of the dry polymer brush, i.e., contraction and expansion, was found to be reversible with repeated irradiation cycles and requires only a few seconds for switching. In addition to the thickness change, the roughness of the brush also changes reversibly between a few Angstroms (blue light) and several nanometers (UV light). Photosensitive polymer brushes represent smart films with light responsive thickness and roughness that could be used for generating dynamic fluctuating surfaces, the function of which can be turned on and off in a controllable manner on a nanometer length scale.

Direct Measurement of Molecular Weight and Grafting Density by Controlled and Quantitative Degrafting of Surface-Anchored Poly(methyl methacrylate).

We report on quantitative determination of the molecular weight distribution (MWD) and grafting density (σP) of polymer assemblies grown by controlled radical polymerization from flat substrates as a function of polymerization time and the ratio between the inhibitor and catalyst species. Specifically, we grow poly(methyl methacrylate) (PMMA) brushes on flat silica-based surfaces by surface-initiated atom transfer radical polymerization (SI-ATRP), cleave the PMMA grafts quantitatively using tetrabutyl ammonium fluoride (TBAF), and analyze their MWD by size exclusion chromatography equipped with a high-sensitivity differential refractive index detector. The polymer growth and degrafting processes are followed by ellipsometry, X-ray photoelectron spectroscopy, and time-of-flight secondary ion mass spectrometry. The σP is independent of polymerization time and increases with increasing SI-ATRP inhibitor/catalyst ratio. Specifically, σP increases from 0.48 ± 0.06 to 0.58 ± 0.06 chains/nm2 as the inhibitor/catalyst molar ratio increases from 0 to 0.015, respectively, providing evidence that high inhibitor/catalyst ratio offers better control of the SI-ATRP reaction, by lowering number of terminations, and leading to denser PMMA brush assemblies.