RESUMO
BACKGROUND: Artistic gymnastics is reported to have some of the highest injury rates in sports, which limits participation and often involves considerable medical expenses. PURPOSE: To critically appraise the epidemiological literature on injury patterns and risk factors in competitive artistic gymnastics. STUDY DESIGN: Systematic review. METHODS: Six databases were searched for articles that investigated injuries in competitive artistic gymnasts. Injury incidence, prevalence and risk factor data were extracted, alongside information on injury location, type, severity, nature and mechanism of injury. Quality and level of evidence were assessed using a modified Downs and Black quality index checklist and the Oxford Centre for Evidence-based Medicine guidelines. RESULTS: The search identified 894 articles, with 22 eligible for inclusion. Descriptive analysis showed that injury incidence and prevalence varied from 0.3 to 3.6 injuries per gymnast (female=0.3-3.6, male=0.7) and 2.0-2.3 (female=2.0-2.3, male=2.0), respectively. Male gymnasts sustained mostly upper limb injuries, while female gymnast reported lower limb injuries. Floor was associated with the greatest number of injuries for both male and female gymnasts. Higher competitive level and exposure to competition were risk factors for gymnastics injury: age, body mass, body size, training duration and life stress were significant associated factors. CONCLUSION: Injury incidence and prevalence results are substantial among artistic gymnasts of all competitive levels. Gymnasts who train at highly competitive levels and are exposed to competition environments are a greater risk of injury. Future researchers should implement consistent reporting methods.
Assuntos
Traumatismos em Atletas/epidemiologia , Ginástica/lesões , Humanos , Incidência , Prevalência , Fatores de RiscoRESUMO
Undulatory underwater swimming (UUS) is one of the major skills contributing to performance in competitive swimming. UUS has two phases- the upbeat is performed by hip extension and knee flexion, and the downbeat is the converse action. The purpose of this study was to determine which kinematic variables of the upbeat and downbeat are associated with prone UUS performance in an elite sample. Ten elite participants were filmed performing three prone 20 m UUS trials. Seven landmarks were manually digitised to calculate eighteen kinematic variables, plus the performance variable- horizontal centre of mass velocity (VCOM). Mean VCOM was significantly correlated with body wave velocity (upbeat r = 0.81, downbeat r = 0.72), vertical toe velocity (upbeat r = 0.71, downbeat r = 0.86), phase duration (upbeat r = -0.79), peak hip angular velocity (upbeat r = 0.73) and mean knee angular velocity (upbeat r = -0.63), all significant at P < 0.05. A multiple stepwise regression model explained 78% of variance in mean VCOM. Peak toe velocity explained 72% of the variance, and mean body wave velocity explained an additional 6%. Elite swimmers should strive for a high peak toe velocity and a fast caudal transfer of momentum to optimise underwater undulatory swimming performance.
Assuntos
Natação/fisiologia , Aceleração , Adolescente , Adulto , Fenômenos Biomecânicos , Feminino , Quadril/fisiologia , Humanos , Joelho/fisiologia , Masculino , Destreza Motora/fisiologia , Análise de Regressão , Estudos de Tempo e Movimento , Dedos do Pé/fisiologia , Adulto JovemRESUMO
Three-dimensional (3D) photonic scanning is an emerging technique to acquire accurate body segment parameter data. This study established the repeated reliability of segmental centres of mass when using 3D photonic scanning (3DPS). Seventeen male participants were scanned twice by a 3D whole-body laser scanner. The same operators conducted the reconstruction and segmentation processes to obtain segmental meshes for calculating the segmental centres of mass. The segmental centres of mass obtained from repeated 3DPS were compared by relative technical error of measurement (TEM). Hypothesis tests were conducted to determine the size of change required for each segment to be determined a true variation. The relative TEMs for all segments were less than 5%. The relative changes in centres of mass at ±1.5% for most segments can be detected (p < 0.05). The arm segments which are difficult to keep in the same scanning pose generated more error than other segments. Practitioner Summary: Three-dimensional photonic scanning is an emerging technique to acquire body segment parameter data. This study established the repeated reliability of segmental centres of mass when using 3D photonic scanning and emphasised that the error for arm segments need to be considered while using this technique to acquire centres of mass.
Assuntos
Antropometria/métodos , Imageamento Tridimensional/métodos , Adulto , Fenômenos Biomecânicos , Humanos , Lasers , Masculino , Pessoa de Meia-Idade , Reprodutibilidade dos TestesRESUMO
The connections between swimming technique and the fluid dynamical interactions they generate are important for assisting performance improvement. Computational fluid dynamics (CFD) modeling provides a controlled and unobtrusive way for understanding the fundamentals of swimming. A coupled biomechanical-smoothed particle hydrodynamics (SPH) fluid model is used to analyze the thrust and drag generation of a freestyle swimmer. The swimmer model was generated using a three-dimensional laser body scan of the athlete and digitization of multi-angle video footage. Two large distinct peaks in net streamwise thrust are found during the stroke, which coincide with the underwater arm strokes. The hand motions generate vortical structures that travel along the body toward the kicking legs and the hands are shown to produce thrust using both lift and drag. These findings advance understanding of the freestyle stroke and may be used to improve athlete technique.
Assuntos
Mãos/fisiologia , Natação/fisiologia , Fenômenos Biomecânicos , Feminino , Humanos , Hidrodinâmica , Perna (Membro)/fisiologia , MovimentoRESUMO
The swimming start is typically broken into three sub-phases; on-block, flight, and underwater phases. While overall start performance is highly important to elite swimming, the contribution of each phase and important technical components within each phase, particularly with the new kick-start technique, has not been established. The aim of this study was to identify technical factors associated with overall start performance, with a particular focus on the underwater phase. A number of parameters were calculated from 52 starts performed by elite freestyle and butterfly swimmers. These parameters were split into above-water and underwater groupings, before factor analysis was used to reduce parameter numbers for multiple regression. For the above-water phases, 81% of variance in start performance was accounted for by take-off horizontal velocity. For the underwater water phase, 96% of variance was accounted for with time underwater in descent, time underwater in ascent and time to 10 m. Therefore, developing greater take-off horizontal velocity and focussing on the underwater phase by finding the ideal trajectory will lead to improved start performance.
Assuntos
Desempenho Atlético/fisiologia , Natação/fisiologia , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Análise de Regressão , Estudos Retrospectivos , Análise e Desempenho de Tarefas , Adulto JovemRESUMO
During the underwater phase of the swimming start drag forces are constantly acting to slow the swimmer down. The current study aimed to quantify total drag force as well as the specific contribution of wave drag during the underwater phase of the swimming start. Swimmers were towed at three different depths (surface, 0.5 m, 1.0 m) and four speeds (1.6, 1.9, 2.0, 2.5 m · s(-1)), totaling 12 conditions. Wave drag and total drag were measured for each trial. Mixed modeling and plots were then used to determine the relationships between each towing condition and the amount of drag acting on the swimmer. The results of this study show large decreases in total drag as depth increases, regardless of speed (-19.7% at 0.5 m and -23.8% at 1.0 m). This is largely due to the significant reduction in wave drag as the swimmers traveled at greater depth. It is recommended that swimmers travel at least 0.5 m below the surface to avoid excessive drag forces. Swimmers should also perform efficient breakouts when transitioning into free swimming to reduce the duration spent just below the surface where drag values are reported at their highest.
Assuntos
Natação/fisiologia , Água , Adulto , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Modelos Biológicos , Estresse Mecânico , Análise e Desempenho de Tarefas , Movimentos da Água , Adulto JovemRESUMO
The swimming start is highly influential to overall competition performance. Therefore, it is paramount to develop reliable methods to perform accurate biomechanical analysis of start performance for training and research. The Wetplate Analysis System is a custom-made force plate system developed by the Australian Institute of Sport--Aquatic Testing, Training and Research Unit (AIS ATTRU). This sophisticated system combines both force data and 2D digitization to measure a number of kinetic and kinematic parameter values in an attempt to evaluate start performance. Fourteen elite swimmers performed two maximal effort dives (performance was defined as time from start signal to 15 m) over two separate testing sessions. Intraclass correlation coefficients (ICC) were used to determine each parameter's reliability. The kinetic parameters all had ICC greater than 0.9 except the time of peak vertical force (0.742). This may have been due to variations in movement initiation after the starting signal between trials. The kinematic and time parameters also had ICC greater than 0.9 apart from for the time of maximum depth (0.719). This parameter was lower due to the swimmers varying their depth between trials. Based on the high ICC scores for all parameters, the Wetplate Analysis System is suitable for biomechanical analysis of swimming starts.
Assuntos
Natação/fisiologia , Desempenho Atlético/fisiologia , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Reprodutibilidade dos Testes , Análise e Desempenho de TarefasRESUMO
The purpose of this study was to determine the pitching effects of buoyancy during all competitive swimming strokes--freestyle, backstroke, butterfly, and breaststroke. Laser body scans of national-level athletes and synchronized multiangle swimming footage were used in a novel markerless motion capture process to produce three-dimensional biomechanical models of the swimming athletes. The deforming surface meshes were then used to calculate swimmer center-of-mass (CoM) positions, center-of-buoyancy (CoB) positions, pitch buoyancy torques, and sagittal plane moments of inertia (MoI) throughout each stroke cycle. In all cases the mean buoyancy torque tended to raise the legs and lower the head; however, during part of the butterfly stroke the instantaneous buoyancy torque had the opposite effect. The swimming strokes that use opposing arm and leg strokes (freestyle and backstroke) had smaller variations in CoM positions, CoB positions, and buoyancy torques. Strokes with synchronized left-right arm and leg movement (butterfly and breaststroke) had larger variations in buoyancy torques, which impacts the swimmer's ability to maintain a horizontal body pitch for these strokes. The methodology outlined in this paper enables the rotational effects of buoyancy to be better understood by swimmers, allowing better control of streamlined horizontal body positioning during swimming to improve performance.
Assuntos
Desempenho Atlético/fisiologia , Comportamento Competitivo/fisiologia , Natação/fisiologia , Adulto , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Modelos Biológicos , Torque , Gravação em VídeoRESUMO
A better understanding of the strains experienced by the Achilles tendon during commonly prescribed exercises and locomotor tasks is needed to improve efficacy of Achilles tendon training and rehabilitation programs. The aim of this study was to estimate in vivo free Achilles tendon strain during selected rehabilitation, locomotor, jumping, and landing tasks. Sixteen trained runners with no symptoms of Achilles tendinopathy participated in this study. Personalized free Achilles tendon moment arm and force-strain curve were obtained from imaging data and used in conjunction with motion capture and surface electromyography to estimate free Achilles tendon strain using electromyogram-informed neuromusculoskeletal modeling. There was a strong correspondence between Achilles tendon force estimates from the present study and experimental data reported in the literature (R2 > 0.85). The average tendon strain was highest for maximal hop landing (8.8 ± 1.6%), lowest for walking at 1.4 m/s (3.1 ± 0.8%), and increased with locomotor speed during running (run 3.0 m/s: 6.5 ± 1.6%; run 5.0 m/s: 7.9 ± 1.7%) and during heel rise exercise with added mass (BW: 5.8 ± 1.3%; 1.2 BW: 6.9 ± 1.7%). The peak tendon strain was highest during running (5 m/s: 13.7 ± 2.5%) and lowest during walking (1.4 m/s: 7 ± 1.8%). Overall findings provide a preliminary evidence base for exercise selection to maximize anabolic tendon remodeling during training and rehabilitation of the Achilles tendon.NEW & NOTEWORTHY Our work combines medical imaging and electromyogram-informed neuromusculoskeletal modeling data to estimate free Achilles tendon strain during selected rehabilitation, locomotor, jumping, and landing tasks in trained middle-distance runners. These data may potentially be used to inform Achilles tendon training and rehabilitation to maximize anabolic tendon remodeling.
Assuntos
Tendão do Calcâneo , Corrida , Tendinopatia , Traumatismos dos Tendões , Fenômenos Biomecânicos , Humanos , CaminhadaRESUMO
The use of asymmetrical strokes is common in freestyle swimming because of breathing and strength laterality. In this study, the asymmetrical freestyle swimming performance of a male elite level swimmer who breathed every second arm stroke (unilaterally) was investigated. A laser body scan and multi-angle video footage of the athlete were used to generate a swimming biomechanical model. This model was then used in a Smoothed Particle Hydrodynamics (SPH) fluid simulation of swimming through a virtual pool. The results from this study enabled the kinematic asymmetry to be related to the consequential fluid dynamic asymmetry. The intra-cyclic fluctuations in the streamwise forces and speed were also examined. Hand angles of attack were compared along with the lift and drag contributions of the hands to generating the streamwise thrust. From this study, connections between asymmetry and the resultant swimming performance were identified.
Assuntos
Hidrodinâmica , Natação/fisiologia , Atletas , Fenômenos Biomecânicos , Simulação por Computador , Mãos , Humanos , Masculino , Modelos Biológicos , Fatores de TempoRESUMO
Tendon geometry and tissue properties are important determinants of tendon function and injury risk and are altered in response to ageing, disease, and physical activity levels. The purpose of this study was to compare free Achilles tendon geometry and mechanical properties between trained elite/sub-elite middle-distance runners and a healthy control group. Magnetic resonance imaging (MRI) was used to measure free Achilles tendon volume, length, average cross-sectional area (CSA), regional CSA, moment arm, and T2* relaxation time at rest, while freehand three-dimensional ultrasound (3DUS) was used to quantify free Achilles tendon mechanical stiffness, Young's modulus, and length normalised mechanical stiffness. The free Achilles tendon in trained runners was significantly shorter and the average and regional CSA (distal end) were significantly larger compared to the control group. Mechanical stiffness of the free Achilles tendon was also significantly higher in trained runners compared to controls, which was explained by the group differences in tendon CSA and length. T2* relaxation time was significantly longer in trained middle-distance runners when compared to healthy controls. There was no relationship between T2* relaxation time and Young's modulus. The longer T2* relaxation time in trained runners may be indicative of accumulated damage, disorganised collagen, and increased water content in the free Achilles tendon. A short free Achilles tendon with large CSA and higher mechanical stiffness may enable trained runners to rapidly transfer high muscle forces and possibly reduce the risk of tendon damage from mechanical fatigue.
RESUMO
The purpose of this study was to assess the similarity of free Achilles tendon shape and 3-D geometry between magnetic resonance imaging (MRI) and freehand 3-D ultrasound (3-DUS) imaging methods. Fourteen elite/sub-elite middle-distance runners participated in the study. MRI and 3-DUS scans of the Achilles tendon were acquired on two separate imaging sessions, and all 3-D reconstructions were performed using identical methods. Shape similarity of free Achilles tendon reconstructed from MRI and 3-DUS data was assessed using Jaccard index, Hausdorff distance and root mean square error (RMSE). The Jaccard index, Hausdorff distance and RMSE values were 0.76 ± 0.05, 2.70 ± 0.70 and 0.61 ± 0.10 mm, respectively. The level of agreement between MRI and 3-DUS for free Achilles tendon volume, length and average cross-sectional area (CSA) was assessed using Bland-Altman analysis. Compared to MRI, freehand 3-DUS overestimated volume, length and average CSA by 30.6 ± 15.8 mm3 (1.1% ± 0.6%), 0.3 ± 0.7 mm (0.6% ± 1.9%) and 0.3 ± 1.42 mm2 (0.4% ± 2.0%), respectively. The upper and lower limits of agreement between MRI and 3-DUS for volume, length and average CSA were -0.4 to 61.7 mm3 (-0.2% to 2.3%), -1.0 to 1.5 mm (-3.2% to 4.5%) and -2.5 to 3.1 mm2 (-3.5% to 4.3%), respectively. There were no significant differences between imaging methods in CSA along the length of the tendon. In conclusion, MRI and freehand 3-DUS may be considered equivalent methods for estimating shape and 3-D geometry of the free Achilles tendon. These findings, together with the practical benefits of being able to assess 3-D Achilles tendon shape and geometry in a laboratory environment and under isometric loading, make 3-DUS an attractive alternative to MRI for assessing 3-D free Achilles tendon macro-structure in future studies.
Assuntos
Tendão do Calcâneo/diagnóstico por imagem , Atletas , Imageamento Tridimensional/métodos , Imageamento por Ressonância Magnética/métodos , Ultrassonografia/métodos , Adulto , Feminino , Humanos , Interpretação de Imagem Assistida por Computador , MasculinoRESUMO
Whole-body volumes and segmental volumes are highly related to the health and medical condition of individuals. However, the traditional manual post-processing of raw 3D scanned data is time-consuming and needs technical expertise. The purpose of this study was to develop bespoke software for obtaining whole-body volumes and segmental volumes from raw 3D scanned data automatically and to establish its accuracy and reliability. The bespoke software applied Stitched Puppet model fitting techniques to deform template models to fit the 3D raw scanned data to identify the segmental endpoints and determine their locations. Finally, the bespoke software used the location information of segmental endpoints to set segmental boundaries on the reconstructed meshes and to calculate body volume. The whole-body volumes and segmental volumes (head & neck, torso, arms, and legs) of 29 participants processed by the traditional manual operation were regarded as the references and compared to the measurements obtained with the bespoke software using the intra-method and inter-method relative technical errors of measurement. The results showed that the errors in whole-body volumes and most segmental volumes acquired from the bespoke software were less than 5%. Overall, the bespoke software developed in this study can complete the post-processing tasks without any technical expertise, and the obtained whole-body volumes and segmental volumes can achieve good accuracy for some applications in health and medicine.
Assuntos
Algoritmos , Pesos e Medidas Corporais/métodos , Imageamento Tridimensional/métodos , Software , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-IdadeRESUMO
UNLABELLED: Once a swimmer enters the water they will not increase velocity, instead they will decelerate. One factor that will influence the velocity maintained during the underwater phase is the trajectory the swimmer adopts. OBJECTIVES: Once a swimmer enters the water they will not increase velocity, instead they will decelerate. One factor that will influence the velocity maintained during the underwater phase is the trajectory the swimmer adopts. This study aimed to identify how different underwater trajectories affect start time in elite swimmers. METHODS: Fourteen swimmers performed three dives: a shallow dive with little underwater time (Dive 1), a flatter dive with intermediate time underwater (Dive 2) and a deep dive with lengthy underwater time (Dive 3). The proprietary 'Wetplate' analysis system was used to collect performance time (time to 15 m) and other dive parameters. RESULTS: A mixed modelling approach found Dive 1 was significantly slower than Dive 2 and 3 (time to 15 m). This indicated that both a shallow or deep dive slowed overall performance, with shallower dives adversely affecting performance the most. CONCLUSIONS: On average, using a flatter trajectory with a maximum depth of -0.92 ± 0.16 m similar to Dive 2 may prove to be beneficial to start performance. More research is needed to examine the interaction between drag and depth for individual swimmers to better understand the mechanisms influencing these findings and to further explore the notion of an ideal underwater trajectory.
Assuntos
Desempenho Atlético/fisiologia , Mergulho/fisiologia , Natação/fisiologia , Adolescente , Fenômenos Biomecânicos , Desaceleração , Feminino , Humanos , Imersão , Masculino , Análise e Desempenho de Tarefas , Fatores de Tempo , Adulto JovemRESUMO
UNLABELLED: Time trials are commonly used in the lead-up to competition. A method that evaluates the relationship between time trial and competition performance in swimming would be useful for developing performance-enhancement strategies. PURPOSE: To use linear mixed modeling to identify key parameters that can be used to relate time-trial and competition performance. METHODS: Ten swimmers participated in the study. Each swimmer was analyzed during 3 time trials and 1 competition. Race video footage was analyzed to determine several key parameters. Pooling of strokes and distances was achieved by modeling changes in parameters between time trials and competition within each subject as linear predictors of percent change in performance using mixed modeling of log-transformed race times. RESULTS: When parameters were evaluated as the effect of 2 SD on performance time, there were very large effects of start time (2.6%, 90% confidence interval 1.8-3.3%) and average velocity (-2.3%, -2.8% to -1.8%). There was also a small effect for stroke rate (-0.6%, -1.3% to 0.2%). Further analysis revealed an improvement in performance time of 2.4% between time trials and competition, of which 1.8% (large; 1.4-2.1%) was due to a change in average velocity and 0.9% (moderate; 0.6-1.1%) was due to a change in start time; changes in remaining parameters had trivial effects on performance. CONCLUSION: This study illustrates effective analytical strategies for identifying key parameters that can be the focus of training to improve performance in small squads of elite swimmers and other athletes.