SO2 Capture at Low Pressure in a Prototypical MIL-53 Aluminum MOF Family: The Influence of Pore Expansion.

Not only is excellent performance in SO2 capture by porous materials (uptake above 17 mmol g-1) relevant, but also finding a correlation between the architecture changes into a family and their SO2 adsorption is very useful. In this contribution, we studied the SO2 adsorption behavior (at very low pressure) of an Al(III)-MOF family that shares the pore architecture of MIL-53. The results indicate an inversely proportional trend for the SO2 capture and pore expansion, since by increasing the length of the channel pore, the SO2 uptake gradually decreases. In addition, this trend is clearly observed in the heat of adsorption, which describes the interaction between the SO2 molecule and the µ-OH functional group. These finding are supported by experimental analysis and computational studies.

Low-Valent Metals in Metal-Organic Frameworks Via Post-Synthetic Modification.

Metal-organic frameworks (MOFs) provide uniquely tunable, periodic platforms for site-isolation of reactive low-valent metal complexes of relevance in modern catalysis, adsorptive applications, and fundamental structural studies. Strategies for integrating such species in MOFs include post-synthetic metalation, encapsulation and direct synthesis using low-valent organometallic complexes as building blocks. These approaches have each proven effective in enhancing catalytic activity, modulating product distributions (i.e., by improving catalytic selectivity), and providing valuable mechanistic insights. In this minireview, we explore these different strategies, as applied to isolate low-valent species within MOFs, with a particular focus on examples that leverage the unique crystallinity, permanent porosity and chemical mutability of MOFs to achieve deep structural insights that lead to new paradigms in the field of hybrid catalysis.

Intramolecular Tricarbonyl-Ene Reactions and α-Hydroxy-ß-Diketone Rearrangements Inspired by the Biosynthesis of Polycyclic Polyprenylated Acylphloroglucinols.

Structurally unique natural products pose biosynthetic puzzles whose solution can inspire new chemical reactions. Herein, we propose a unified biosynthetic pathway towards some complex meroterpenoids-the hyperireflexolides, biyoulactones, hybeanones and hypermonones. This hypothesis led to the discovery of uncatalyzed, intramolecular carbonyl-ene reactions that are spontaneous at room temperature. We also developed an anionic cascade reaction featuring an α-hydroxy-ß-diketone rearrangement and an intramolecular aldol reaction to access four distinct natural product scaffolds from a common intermediate.

Switchable Metal Sites in Metal-Organic Framework MFM-300(Sc): Lewis Acid Catalysis Driven by Metal-Hemilabile Linker Bond Dynamics.

Uncommon reversible guest-induced metal-hemilabile linker bond dynamics in MOF MFM-300(Sc) was unraveled to switch on/switch off catalytic open metal sites. The catalytic activity of this MOF with non-permanent open metal sites was demonstrated using a model Strecker hydrocyanation reaction as a proof-of-concept. Conclusively, the catalytic activity was evidenced to be fully reversible, preserving the conversion performance and structure integrity of MFM-300(Sc) over multiple cycles. These experimental findings were corroborated by quantum-calculations that revealed a reaction mechanism driven by the Sc-open metal sites. This discovery paves the way towards the design of new effective and easily regenerable heterogeneous MOF catalysts integrating switchable metal sites.

MOF matrix isolation: cooperative conformational mobility enables reliable single crystal transformations.

Obtaining structural information for highly reactive metal-based species can provide valuable insight into important chemical transformations or catalytic processes. Trapping these metal-based species within the cavities of porous crystalline hosts, such as metal-organic frameworks (MOFs), can stabilise them, allowing detailed structural elucidation by single crystal X-ray diffraction. Previously, we have used a bespoke flexible MOF, [Mn3L2L'] (MnMOF-1, where L = bis-(4-carboxyphenyl-3,5-dimethylpyrazolyl)methane and L = L', but L' has a vacant N,N'-chelation site), which has a chelating site capable of post-synthetically binding metal ions, to study organometallic transformations and fundamental isomerisation processes. This manuscript will report the underlying conformational flexibility of the framework, demonstrate the solvent dependency of post-synthetic metalation, and show that the structural flexibility of the linker site and framework are critical to controlling and achieving high levels of metal loading (and therefore site occupancy) during chemical transformations. From these results, a set of design principles for linker-based "matrix isolation" and structure determination in MOFs are derived.

Single-Crystal-to-Single-Crystal Transformations of Metal-Organic-Framework-Supported, Site-Isolated Trigonal-Planar Cu(I) Complexes with Labile Ligands.

Transition-metal complexes bearing labile ligands can be difficult to isolate and study in solution because of unwanted dinucleation or ligand substitution reactions. Metal-organic frameworks (MOFs) provide a unique matrix that allows site isolation and stabilization of well-defined transition-metal complexes that may be of importance as moieties for gas adsorption or catalysis. Herein we report the development of an in situ anion metathesis strategy that facilitates the postsynthetic modification of Cu(I) complexes appended to a porous, crystalline MOF. By exchange of coordinated chloride for weakly coordinating anions in the presence of carbon monoxide (CO) or ethylene, a series of labile MOF-appended Cu(I) complexes featuring CO or ethylene ligands are prepared and structurally characterized using X-ray crystallography. These complexes have an uncommon trigonal planar geometry because of the absence of coordinating solvents. The porous host framework allows small and moderately sized molecules to access the isolated Cu(I) sites and displace the "place-holder" CO ligand, mirroring the ligand-exchange processes involved in Cu-centered catalysis.

Highly Active Gas Phase Organometallic Catalysis Supported Within Metal-Organic Framework Pores.

Metal-organic frameworks (MOFs) can act as a platform for the heterogenization of molecular catalysts, providing improved stability, allowing easy catalyst recovery and a route toward structural elucidation of the active catalyst. We have developed a MOF, 1, possessing vacant N,N-chelating sites which are accessible via the porous channels that penetrate the structure. In the present work, cationic rhodium(I) norbornadiene (NBD) and bis(ethylene) (ETH) complexes paired with both noncoordinating and coordinating anions have been incorporated into the N,N-chelation sites of 1 via postsynthetic metalation and facile anion exchange. Exploiting the crystallinity of the host framework, the immobilized Rh(I) complexes were structurally characterized using X-ray crystallography. Ethylene hydrogenation catalysis by 1·[Rh(NBD)]X and 1·[Rh(ETH)2]X (X = Cl and BF4) was studied in the gas phase (2 bar, 46 °C) to reveal that 1·[Rh(ETH)2](BF4) was the most active catalyst (TOF = 64 h-1); the NBD materials and the chloride salt were notably less active. On the basis of these observations, the activity of the Rh(I) bis(ethylene) complexes, 1·[Rh(ETH)2]BF4 and 1·[Rh(ETH)2]Cl, in butene isomerization was also studied using gas-phase NMR spectroscopy. Under one bar of butene at 46 °C, 1·[Rh(ETH)2]BF4 rapidly catalyzes the conversion of 1-butene to 2-butene with a TOF averaging 2000 h-1 over five cycles. Notably, the chloride derivative, 1 [Rh(ETH)2]Cl displays negligible activity in comparison. XPS analysis of the postcatalysis sample, supported by DFT calculations, suggest that the catalytic activity is inhibited by the strong interactions between a Rh(III) allyl hydride intermediate and the chloride anion.

CYCU-3: an Al(III)-based MOF for SO2 capture and detection.

The Al(III)-based MOF CYCU-3 exhibits a relevant SO2 adsorption performance with a total uptake of 11.03 mmol g-1 at 1 bar and 298 K. CYCU-3 displays high chemical stability towards dry and wet SO2 exposure. DRIFTS experiments and computational calculations demonstrated that hydrogen bonding between SO2 molecules and bridging Al(III)-OH groups are the preferential adsorption sites. In addition, photoluminescence experiments demonstrated the relevance of CYCU-3 for application in SO2 detection with good selectivity for SO2 over CO2 and H2O. The change in fluorescence performance demonstrates a clear turn-on effect after SO2 interaction. Finally, the suppression of ligand-metal energy transfer along with the enhancement of ligand-centered π* → π electronic transition was proposed as a plausible fluorescence mechanism.

APTES functionalization in SBA-15: the effect on SO2 capture and detection applications.

The development of adsorbents for air pollutant remediation and effective monitoring is of interest. Then, the effect of the APTES functionalization ratio on the impact of the adsorption and detection of SO2 molecules was evaluated. The higher APTES functionalization material (SBA-15_6.1APTES) shows a high uptake of 1.15 mmol g-1 at 0.001 bar and 298 K. Fluorescence, time-resolved photoluminescence, and quantum yield experiments revealed a turn-on effect specifically for SO2 molecules, indicating high selectivity, suggesting host-to-guest energy transfer. Attractively, XPS measurement provided an understanding of the mechanism, suggesting hydrogen bonding and dipole-dipole interactions as the main interactions between SO2 molecules and SBA-15_6.1APTES. DFT calculations were performed to confirm these interactions. Furthermore, this study highlights the application of SBA-15 materials with different amino modifications for SO2 treatment and provides insight into the interaction mechanism using experimental techniques.

Gas-phase organometallic catalysis in MFM-300(Sc) provided by switchable dynamic metal sites.

MFM-300(Sc) was explored as a catalyst for the gas-phase hydrogenation of acetone. The catalysis results support the presence of non-permanent open Sc(III) sites within the structure due to the requirement of Lewis acid sites for the reaction to proceed. The open Sc(III) sites are generated in situ due to the presence of hemilabile Sc-O bonds. MFM-300(Sc) showed high mechanical and chemical stability, and the crystalline structure was maintained after the catalytic reaction. The catalytic activity of the material was quantified by performing a gas-phase reaction using a continuous flow reactor. The acetone conversion in MFM-300(Sc) was estimated to be 27.7% with no loss of activity after catalytic cycles.

MOF-based catalysts: insights into the chemical transformation of greenhouse and toxic gases.

Metal-organic framework (MOF)-based catalysts are outstanding alternative materials for the chemical transformation of greenhouse and toxic gases into high-add-value products. MOF catalysts exhibit remarkable properties to host different active sites. The combination of catalytic properties of MOFs is mentioned in order to understand their application. Furthermore, the main catalytic reactions, which involve the chemical transformation of CH4, CO2, NOx, fluorinated gases, O3, CO, VOCs, and H2S, are highlighted. The main active centers and reaction conditions for these reactions are presented and discussed to understand the reaction mechanisms. Interestingly, implementing MOF materials as catalysts for toxic gas-phase reactions is a great opportunity to provide new alternatives to enhance the air quality of our planet.

Engineering Catalysis within a Saturated In(III)-Based MOF Possessing Dynamic Ligand-Metal Bonding.

Metal-organic frameworks have developed into a formidable heterogeneous catalysis platform in recent years. It is well established that thermolysis of coordinated solvents from MOF nodes can render highly reactive, coordinatively unsaturated metal complexes which are stabilized via site isolation and serve as active sites in catalysis. Such approaches are limited to frameworks featuring solvated transition-metal complexes and must be stable toward the formation of "permanent" open metal sites. Herein, we exploit the hemilability of metal-carboxylate bonds to generate transient open metal sites in an In(III) MOF, pertinent to In-centered catalysis. The transient open metal sites catalyze the Strecker reaction over multiple cycles without loss of activity or crystallinity. We employ computational and spectroscopic methods to confirm the formation of open metal sites via transient dissociation of In(III)-carboxylate bonds. Furthermore, the amount of transient open metal sites within the material and thus the catalytic performance can be temperature-modulated.

SU-101: a Bi(III)-based metal-organic framework as an efficient heterogeneous catalyst for the CO2 cycloaddition reaction.

A non-porous version of SU-101 (herein n-SU-101) was evaluated for the CO2 cycloaddition reaction. The findings revealed that open metal sites (Bi3+) are necessary for the reaction. n-SU-101 displays a high styrene oxide conversion of 96.6% under mild conditions (3 bar and 80 °C). The catalytic activity of n-SU-101 demonstrated its potential application for the cycloaddition of CO2 using styrene oxide.

Evaluation of the catalytic activity of Zn-MOF-74 for the alcoholysis of cyclohexene oxide.

In the present work, nanocrystalline Zn-MOF-74 is shown to be a heterogeneous catalyst for the acid-catalyzed ring-opening alcoholysis of cyclohexene oxide. The results corroborated that accessible open metal sites within the material are critical conditions (Zn(ii) Lewis acid sites) for this reaction. Zn-MOF-74 was tested at three different temperatures (30, 40, and 50 °C) for the alcoholysis reaction. Furthermore, the cyclohexene oxide conversion was 94% in less than two days. A comparison of the catalytic activity with different crystal sizes of Zn-MOF-74 and the homogenous phase, zinc acetate, was conducted. Zn-MOF-74 exhibited excellent catalytic cyclability for three cycles without losing its activity. The material showed chemical stability by retaining its crystalline structure after the reaction and cyclability process.

Coordination modulated on-off switching of flexibility in a metal-organic framework.

Stimuli-responsive metal-organic frameworks (MOFs) exhibit dynamic, and typically reversible, structural changes upon exposure to external stimuli. This process often induces drastic changes in their adsorption properties. Herein, we present a stimuli-responsive MOF, 1·[CuCl], that shows temperature dependent switching from a rigid to flexible phase. This conversion is associated with a dramatic reversible change in the gas adsorption properties, from Type-I to S-shaped isotherms. The structural transition is facilitated by a novel mechanism that involves both a change in coordination number (3 to 2) and geometry (trigonal planar to linear) of the post-synthetically added Cu(i) ion. This process serves to 'unlock' the framework rigidity imposed by metal chelation of the bis-pyrazolyl groups and realises the intrinsic flexibility of the organic link.

Biomimetic Synthesis Enables the Structure Revision of Littordials E and F and Drychampone B.

Structural reassignments for littordial E, littordial F, and drychampone B are proposed on the basis of consideration of their biosynthetic origin. The key step in the proposed biosynthesis of each of these meroterpenoids is an intermolecular hetero-Diels-Alder reaction between an o-quinone methide and caryophyllene or humulene. Biomimetic total synthesis of the natural products gave sufficient material to allow their structure revision by NMR studies.

Water Adsorption Properties of NOTT-401 and CO2 Capture under Humid Conditions.

The water-stable material NOTT-401 was investigated for CO2 capture under humid conditions. Water adsorption properties of NOTT-401 were studied, and their correlation with CO2 sequestration at different relative humidities (RHs) showed that the CO2 capture increased from 1.2 wt % (anhydrous conditions) to 3.9 wt % under 5% RH at 30 °C, representing a 3.2-fold improvement.

CO2 capture enhancement in InOF-1 via the bottleneck effect of confined ethanol.

CO2 capture of InOF-1 was enhanced 3.6-fold, at 1 bar and 30 °C, by confining EtOH within its pores. Direct visualisation by single crystal X-ray diffraction revealed that EtOH divides InOF-1 channels in wide sections separated by "bottlenecks" caused by EtOH molecules bonded to the µ2-OH functional groups of InOF-1.