On the Hydrogen Oxalate Binding Motifs onto Dinuclear Cu and Ag Metal Phosphine Complexes.

We report the binding geometries of the isomers that are formed when the hydrogen oxalate ((CO2 )2 H=HOx) anion attaches to dinuclear coinage metal phosphine complexes of the form [M1 M2 dcpm2 (HOx)]+ with M=Cu, Ag and dcpm=bis(dicyclohexylphosphino)methane, abbreviated [MM]+ . These structures are established by comparison of isomer-selective experimental vibrational band patterns displayed by the cryogenically cooled and N2 -tagged cations with DFT calculations of the predicted spectra for various local minima. Two isomeric classes are identified that feature either attachment of the carboxylate oxygen atoms to the two metal centers (end-on docking) or attachment of oxygen atoms on different carbon atoms asymmetrically to the metal ions (side-on docking). Within each class, there are additional isomeric variations according to the orientation of the OH group. This behavior indicates that HOx undergoes strong and directional coordination to [CuCu]+ but adopts a more flexible coordination to [AgAg]+ . Infrared spectra of the bare ions, fragmentation thresholds and ion mobility measurements are reported to explore the behaviors of the complexes at ambient temperature.

Destruction and reconstruction of UO22+ using gas-phase reactions.

While the strong axial U[double bond, length as m-dash]O bonds confer high stability and inertness to UO22+, it has been shown that the axial oxo ligands can be eliminated or replaced in the gas-phase using collision-induced dissociation (CID) reactions. We report here tandem mass spectrometry experiments initiated with a gas-phase complex that includes UO22+ coordinated by a 2,6-difluorobenzoate ligand. After decarboxylation to form a difluorophenide coordinated uranyl ion, [UO2(C6F2H3)]+, CID causes elimination of CO, and then CO and C2H2 in sequential dissociation steps, to leave a reactive uranium fluoride ion, [UF2(C2H)]+. Reaction of [UF2(C2H)]+ with CH3OH creates [UF2(OCH3)]+, [UF(OCH3)2]+ and [UF(OCH3)2(CH3OH)]+. Cleavage of C-O bonds within these species results in the elimination of methyl cation (CH3+). Subsequent CID steps convert [UF(OCH3)2]+ to [UO2(F)]+ and similarly, [U(OCH3)3]+ to [UO2(OCH3)]+. Our experiments show removal of both uranyl oxo ligands in "top-down" CID reactions and replacement in "bottom-up" ion-molecule and dissociation steps.

Chemical Reduction of NiII Cyclam and Characterization of Isolated NiI Cyclam with Cryogenic Vibrational Spectroscopy and Inert-Gas-Mediated High-Resolution Mass Spectrometry.

NiII cyclam (cyclam = 1,4,8,11-tetraazacyclotetradecane) is an efficient catalyst for the selective reduction of CO2 to CO. A crucial elementary step in the proposed catalytic cycle is the coordination of CO2 to a NiI cyclam intermediate. Isolation and spectroscopic characterization of this labile NiI species without solvent has proven to be challenging, however, and only partial IR spectra have previously been reported using multiple photon fragmentation of ions generated by gas-phase electron transfer to the NiII cyclam dication at 300 K. Here, we report a chemical reduction method that efficiently prepares NiI cyclam in solution. This enables the NiI complex to be transferred into a cryogenic photofragmentation mass spectrometer using inert-gas-mediated electrospray ionization. The vibrational spectra of the 30 K ion using both H2 and N2 messenger tagging over the range 800-4000 cm-1 were then measured. The resulting spectra were analyzed with the aid of electronic structure calculations, which show strong method dependence in predicted band positions and small molecule activation. The conformational changes of the cyclam ligand induced by binding of the open shell NiI cation were compared with those caused by the spherical, closed-shell LiI cation, which has a similar ionic radius. We also report the vibrational spectrum of a NiI cyclam complex with a strongly bound O2 ligand. The cyclam ligand supporting this species exhibits a large conformational change compared to the complexes with weakly bound N2 and H2, which is likely due to significant charge transfer from Ni to the coordinated O2.

Determination of the SmO+ bond energy by threshold photodissociation of the cryogenically cooled ion.

The SmO+ bond energy has been measured by monitoring the threshold for photodissociation of the cryogenically cooled ion. The action spectrum features a very sharp onset, indicating a bond energy of 5.596 ± 0.004 eV. This value, when combined with the literature value of the samarium ionization energy, indicates that the chemi-ionization reaction of atomic Sm with atomic oxygen is endothermic by 0.048 ± 0.004 eV, which has important implications on the reactivity of Sm atoms released into the upper atmosphere. The SmO+ ion was prepared by electrospray ionization followed by collisional breakup of two different precursors and characterized by the vibrational spectrum of the He-tagged ion. The UV photodissociation threshold is similar for the 10 K bare ion and the He tagged ion, which rules out the possible role of metastable electronically excited states. Reanalysis and remeasurement of previous reaction kinetics experiments that are dependent on D0(SmO+) are included, bringing all experimental results in accord.

Characterization of the alkali metal oxalates (MC2O4-) and their formation by CO2 reduction via the alkali metal carbonites (MCO2-).

The reduction of carbon dioxide to oxalate has been studied by experimental Collisionally Induced Dissociation (CID) and vibrational characterization of the alkali metal oxalates, supplemented by theoretical electronic structure calculations. The critical step in the reductive process is the coordination of CO2 to an alkali metal anion, forming a metal carbonite MCO2- able to subsequently receive a second CO2 molecule. While the energetic demand for these reactions is generally low, we find that the degree of activation of CO2 in terms of charge transfer and transition state energies is the highest for lithium and systematically decreases down the group (M = Li-Cs). This is correlated to the strength of the binding interaction between the alkali metal and CO2, which can be related to the structure of the oxalate moiety within the product metal complexes evolving from a planar to a staggered conformer with increasing atomic number of the interacting metal. Similar structural changes are observed for crystalline alkali metal oxalates, although the C2O42- moiety is in general more planar in these, a fact that is attributed to the increased number of interacting alkali metal cations compared to the gas-phase ions.

Characterization of the non-covalent docking motif in the isolated reactant complex of a double proton-coupled electron transfer reaction with cryogenic ion spectroscopy.

The solution kinetics of a proton-coupled electron transfer reaction involving two-electron oxidation of a Ru compound with concomitant transfer of two protons to a quinone derivative have been interpreted to indicate the formation of a long-lived intermediate between the reactants. We characterize the ionic reactants, products, and an entrance channel reaction complex in the gas phase using high-resolution mass spectrometry augmented by cryogenic ion IR photodissociation spectroscopy. Collisional activation of this trapped entrance channel complex does not drive the reaction to products but rather yields dissociation back to reactants. Electronic structure calculations indicate that there are four low-lying isomeric forms of the non-covalently bound complex. Comparison of their predicted vibrational spectra with the observed band pattern indicates that the C=O groups of the ortho-quinone attach to protons on two different -NH2 groups of the reactant scaffold, exhibiting strong O-H-N contact motifs. Since collisional activation does not lead to the products observed in the liquid phase, these results indicate that the reaction most likely proceeds through reorientation of the H-atom donor ligand about the metal center.

Hydrogen Tag Shifts as Vibrational Reporters for Positional Isomers of Formylphenides: Surprising Mobility of the Carbanion Center upon Collisional Decarboxylation of the Parent Benzoates.

Infrared photodissociation of weakly bound "mass tags" is widely used to determine the structures of ions by analyzing their vibrational spectra. Molecular hydrogen is a common choice for tagging in cryogenic radio-frequency ion traps. Although the H2 molecules can introduce distortions in the target species, we demonstrate an advantage of H2 tagging in the analysis of positional isomers adopted by the molecular anions derived from decarboxylation of formylbenzoates. Attachment of H2 to the carbanion centers of three such isomers yields distinct shifts in the H2 stretch, which can be used to determine the distribution of isomers in an unknown sample. Electronic structure calculations indicate that the position-dependent shifts are due to different reactivities of the carbanion sites with respect to an intracluster proton-transfer reaction with the H2 molecule. We exploit this spectroscopic method to quantify the surprisingly facile migrations of the anionic center that have been previously reported for phenide rearrangements.

Structures and Chemical Rearrangements of Benzoate Derivatives Following Gas Phase Decarboxylation.

Decarboxylation of carboxylate ions in the gas phase provides a useful window into the chemistry displayed by these reactive carbanion intermediates. Here, we explore the species generated by decarboxylation of two benzoate derivatives: 2-formylbenzoate (2FBA) and 2-benzoylbenzoate (2BBA). The nascent product anions are transferred to a cryogenic ion trap where they are cooled to ∼15 K and analyzed by their pattern of vibrational bands obtained with IR photodissociation spectroscopy of weakly bound H2 molecules. The structures of the quenched species are then determined by comparison of these spectra with those predicted by electronic structure calculations for local minima on the potential energy surface. The 2-phenide carbanion generated by decarboxylation of 2FBA occurs in two isomeric forms that differ in the orientation of the formyl group, both of which yield a very large (∼110 cm-1) redshift in the stretching frequency of the H2 molecule attached to the anionic carbon center. Although calculated to be a local minimum, the analogous 2-phenide species could not be isolated upon decarboxylation of 2BBA. Rather, the anionic product adopts a ring-closed structure, indicating efficient nucleophilic attack on the pendant phenyl group by the nascent phenide. The barrier for ring closing is evaluated with electronic structure calculations.

Integration of High-Resolution Mass Spectrometry with Cryogenic Ion Vibrational Spectroscopy.

We describe an instrumental configuration for the structural characterization of fragment ions generated by collisional dissociation of peptide ions in the typical MS2 scheme widely used for peptide sequencing. Structures are determined by comparing the vibrational band patterns displayed by cryogenically cooled ions with calculated spectra for candidate structural isomers. These spectra were obtained in a linear action mode by photodissociation of weakly bound D2 molecules. This is accomplished by interfacing a Thermo Fisher Scientific Orbitrap Velos Pro to a cryogenic, triple focusing time-of-flight photofragmentation mass spectrometer (the Yale TOF spectrometer). The interface involves replacement of the Orbitrap's higher-energy collisional dissociation cell with a voltage-gated aperture that maintains the commercial instrument's standard capabilities while enabling bidirectional transfer of ions between the high-resolution FT analyzer and external ion sources. The performance of this hybrid instrument is demonstrated by its application to the a1, y1 and z1 fragment ions generated by CID of a prototypical dipeptide precursor, protonated L-phenylalanyl-L-tyrosine (H+-Phe-Tyr-OH or FY-H+). The structure of the unusual z1 ion, nominally formed after NH3 is ejected from the protonated tyrosine (y1) product, is identified as the cyclopropane-based product is tentatively identified as a cyclopropane-based product.