Partial coherence enhances parallelized photonic computing.

Advancements in optical coherence control1-5 have unlocked many cutting-edge applications, including long-haul communication, light detection and ranging (LiDAR) and optical coherence tomography6-8. Prevailing wisdom suggests that using more coherent light sources leads to enhanced system performance and device functionalities9-11. Our study introduces a photonic convolutional processing system that takes advantage of partially coherent light to boost computing parallelism without substantially sacrificing accuracy, potentially enabling larger-size photonic tensor cores. The reduction of the degree of coherence optimizes bandwidth use in the photonic convolutional processing system. This breakthrough challenges the traditional belief that coherence is essential or even advantageous in integrated photonic accelerators, thereby enabling the use of light sources with less rigorous feedback control and thermal-management requirements for high-throughput photonic computing. Here we demonstrate such a system in two photonic platforms for computing applications: a photonic tensor core using phase-change-material photonic memories that delivers parallel convolution operations to classify the gaits of ten patients with Parkinson's disease with 92.2% accuracy (92.7% theoretically) and a silicon photonic tensor core with embedded electro-absorption modulators (EAMs) to facilitate 0.108 tera operations per second (TOPS) convolutional processing for classifying the Modified National Institute of Standards and Technology (MNIST) handwritten digits dataset with 92.4% accuracy (95.0% theoretically).

Mode Conversion Trimming in Asymmetric Directional Couplers Enabled by Silicon Ion Implantation.

An on-chip asymmetric directional coupler (DC) can convert fundamental modes to higher-order modes and is one of the core components of mode-division multiplexing (MDM) technology. In this study, we propose that waveguides of the asymmetric DC can be trimmed by silicon ion implantation to tune the effective refractive index and facilitate mode conversion into higher-order modes. Through this method of tuning, transmission changes of up to 18 dB have been realized with one ion implantation step. In addition, adjusting the position of the ion implantation on the waveguide can provide a further degree of control over the transmission into the resulting mode. The results of this work present a promising new route for the development of high-efficiency, low-loss mode converters for integrated photonic platforms, and aim to facilitate the application of MDM technology in emerging photonic neuromorphic computing.

Low-Divergence hBN Single-Photon Source with a 3D-Printed Low-Fluorescence Elliptical Polymer Microlens.

Efficiently collecting light from single-photon emitters is crucial for photonic quantum technologies. Here, we develop and use an ultralow fluorescence photopolymer to three-dimensionally print micrometer-sized elliptical lenses on individual precharacterized single-photon emitters in hexagonal boron nitride (hBN) nanocrystals, operating in the visible regime. The elliptical lens design beams the light highly efficiently into the far field, rendering bulky objective lenses obsolete. Using back focal plane imaging, we confirm that the emission is collimated to a narrow low-divergence beam with a half width at half-maximum of 2.2°. Using photon correlation measurements, we demonstrate that the single-photon character remains undisturbed by the polymer lens. The strongly directed emission and increased collection efficiency is highly beneficial for quantum optical experiments. Furthermore, our approach paves the way for a highly parallel fiber-based detection of single photons from hBN nanocrystals.

Scalable High-Precision Trimming of Photonic Resonances by Polymer Exposure to Energetic Beams.

Integrated photonic circuits (PICs) have seen an explosion in interest, through to commercialization in the past decade. Most PICs rely on sharp resonances to modulate, steer, and multiplex signals. However, the spectral characteristics of high-quality resonances are highly sensitive to small variations in fabrication and material constants, which limits their applicability. Active tuning mechanisms are commonly employed to account for such deviations, consuming energy and occupying valuable chip real estate. Readily employable, accurate, and highly scalable mechanisms to tailor the modal properties of photonic integrated circuits are urgently required. Here, we present an elegant and powerful solution to achieve this in a scalable manner during the semiconductor fabrication process using existing lithography tools: by exploiting the volume shrinkage exhibited by certain polymers to permanently modulate the waveguide's effective index. This technique enables broadband and lossless tuning with immediate applicability in wide-ranging applications in optical computing, telecommunications, and free-space optics.

Ultrafast quantum key distribution using fully parallelized quantum channels.

The field of quantum information processing offers secure communication protected by the laws of quantum mechanics and is on the verge of finding wider application for the information transfer of sensitive data. To improve cost-efficiency, extensive research is being carried out on the various components required for high data throughput using quantum key distribution (QKD). Aiming for an application-oriented solution, we report the realization of a multichannel QKD system for plug-and-play high-bandwidth secure communication at telecom wavelengths. We designed a rack-sized multichannel superconducting nanowire single photon detector (SNSPD) system, as well as a highly parallelized time-correlated single photon counting (TCSPC) unit. Our system is linked to an FPGA-controlled QKD evaluation setup for continuous operation, allowing us to achieve high secret key rates using a coherent-one-way protocol.

High-quality factor Ta2O5-on-insulator resonators with ultimate thermal stability.

Experiments in photonics, laser optics, and quantum technology require low-loss, thermal, and mechanical stability. While photonic integrated circuits on monolithic chips achieve interferometric stability, important nanophotonic material systems suffer from propagation loss, thermal drift, and noise that prevent, for example, precise frequency stabilization of resonators. Here we show that tantalum pentoxide (Ta2O5) on insulator micro-ring resonators combine quality factors beyond 1.8 Mio with vanishing temperature-dependent wavelength shift in a relevant 70 K to 90 K temperature range. Our Ta2O5-on-SiO2 devices will thus enable athermal operation at liquid nitrogen temperatures, paving the way for ultra-stable low-cost resonators, as desired for wavelength division multiplexing, on chip frequency stabilization and low-noise optical frequency comb generation.

Antimony as a Programmable Element in Integrated Nanophotonics.

The use of nonlinear elements with memory as photonic computing components has seen a huge surge in interest in recent years with the rise of artificial intelligence and machine learning. A key component is the nonlinear element itself. A class of materials known as phase change materials has been extensively used to demonstrate the viability of such computing. However, such materials continue to have relatively slow switching speeds, and issues with cyclability related to phase segregation of phase change alloys. Here, using antimony (Sb) thin films with thicknesses less than 5 nm we demonstrate reversible, ultrafast switching on an integrated photonic platform with retention time of tens of seconds. We use subpicosecond pulses, the shortest used to switch such elements, to program seven distinct memory levels. This portends their use in ultrafast nanophotonic applications ranging from nanophotonic beam steerers to nanoscale integrated elements for photonic computing.

Cryo-compatible opto-mechanical low-voltage phase-modulator integrated with superconducting single-photon detectors.

Photonic integrated circuits (PICs) have enabled novel functionality in quantum optics, quantum information processing and quantum communication. PICs based on Silicon Nitride (Si3N4) provide low-loss passive components and are compatible with efficient superconducting nanowire single-photon detectors (SNSPDs). For realizing functional quantum photonic systems, the integration with active phase-shifters is needed which is challenging at the cryogenic temperatures needed for operating SNSPDs. Here we demonstrate a cryo-compatible phase shifter using a low-voltage opto-mechanical modulator and show joint operation with SNSPDs at 1.3 K. We achieve a half-wave voltage of 4.6 V, single-photon detection with 88% on-chip detection efficiency (OCDE) and a low timing jitter of 12.2 ps. Our approach allows for operating reconfigurable quantum photonic circuits with low dissipation in a cryogenic setting.

Spontaneous parametric downconversion in linearly uncoupled resonators.

We study degenerate spontaneous parametric downconversion in a structure composed of two linearly uncoupled resonators, in which the linear properties of the fundamental and second-harmonic field can be engineered independently. As an example, we show that in this system it is simple to generate photon pairs that are nearly uncorrelated in energy. These results extend the use of linearly uncoupled resonators to the case of second-order nonlinear interactions.

Efficient self-imaging grating couplers on a lithium-niobate-on-insulator platform at near-visible and telecom wavelengths.

Lithium-niobate-on-insulator (LNOI) has emerged as a promising platform in the field of integrated photonics. Nonlinear optical processes and fast electro-optic modulation have been reported with outstanding performance in ultra-low loss waveguides. In order to harness the advantages offered by the LNOI technology, suitable fiber-to-chip interconnects operating at different wavelength ranges are demanded. Here we present easily manufacturable, self-imaging apodized grating couplers, featuring a coupling efficiency of the TE0 mode as high as ≃47.1% at λ=1550 nm and ≃44.9% at λ=775 nm. Our approach avoids the use of any metal back-reflector for an improved directivity or multi-layer structures for an enhanced grating strength.

Optoelectromechanical phase shifter with low insertion loss and a 13π tuning range.

We present an on-chip optoectromechanical phase shifter with low insertion loss and low half-wave voltage using a silicon nitride platform. The device is based on a slot waveguide in which the electrostatic displacement of mechanical structures results in a change of the effective refractive index. We achieve insertion loss below 0.5 dB at a wavelength of 1550 nm in a Mach-Zehnder Interferometer with an extinction ratio of 31 dB. With a phase tuning length of 210 µm, we demonstrate a half-wave voltage of Vπ = 2.0 V and a 2π phase shift at V2π = 2.7 V. We measure phase shifts up to 13.3 π at 17 V. Our devices can be operated in the MHz range and allow for the generation of sub-µs pulses.

Broadband Spectrometer with Single-Photon Sensitivity Exploiting Tailored Disorder.

Harnessing tailored disorder for broadband light scattering enables high-resolution signal analysis in nanophotonic spectrometers with a small device footprint. Multiple scattering events in the disordered medium enhance the effective path length which leads to increased resolution. Here we demonstrate an on-chip random spectrometer cointegrated with superconducting single-photon detectors suitable for photon-scarce environments. We combine an efficient broadband fiber-to-chip coupling approach with a random scattering area and broadband transparent silicon nitride waveguides to operate the spectrometer in a diffusive regime. Superconducting nanowire single-photon detectors at each output waveguide are used to perform spectral-to-spatial mapping via the transmission matrix at the system, allowing us to reconstruct a given probe signal. We show operation over a wide spectral range with sensitivity down to powers of -111.5 dBm in the telecom band.

Integrating two-photon nonlinear spectroscopy of rubidium atoms with silicon photonics.

We study an integrated silicon photonic chip, composed of several sub-wavelength ridge waveguides, and immersed in a micro-cell with rubidium vapor. Employing two-photon excitation, including a telecom wavelength, we observe that the waveguide transmission spectrum gets modified when the photonic mode is coupled to rubidium atoms through its evanescent tail. Due to the enhanced electric field in the waveguide cladding, the atomic transition can be saturated at a photon number ≈80 times less than a free-propagating beam case. The non-linearity of the atom-clad Si-waveguide is about 4 orders of magnitude larger than the maximum achievable value in doped Si photonics. The measured spectra corroborate well with a generalized effective susceptibility model that includes the Casimir-Polder potentials, due to the dielectric surface, and the transient interaction between flying atoms and the evanescent waveguide mode. This work paves the way towards a miniaturized, low-power, and integrated hybrid atomic-photonic system compatible with CMOS technologies.

Plasmonically-enhanced all-optical integrated phase-change memory.

Integrated phase-change photonic memory devices offer a novel route to non-volatile storage and computing that can be carried out entirely in the optical domain, obviating the necessity for time and energy consuming opto-electrical conversions. Such memory devices generally consist of integrated waveguide structures onto which are fabricated small phase-change memory cells. Switching these cells between their amorphous and crystalline states modifies significantly the optical transmission through the waveguide, so providing memory, and computing, functionality. To carry out such switching, optical pulses are sent down the waveguide, coupling to the phase-change cell, heating it up, and so switching it between states. While great strides have been made in the development of integrated phase-change photonic devices in recent years, there is always a pressing need for faster switching times, lower energy consumption and a smaller device footprint. In this work, therefore, we propose the use of plasmonic enhancement of the light-matter interaction between the propagating waveguide mode and the phase-change cell as a means to faster, smaller and more energy-efficient devices. In particular, we propose a form of plasmonic dimer nanoantenna of significantly sub-micron size that, in simulations, offers significant improvements in switching speeds and energies. Write/erase speeds in the range 2 to 20 ns and write/erase energies in the range 2 to 15 pJ were predicted, representing improvements of one to two orders of magnitude when compared to conventional device architectures.

Broadband out-of-plane coupling at visible wavelengths.

Photonic integrated circuits require efficient interfaces to fiber optic components for applications in optical communication, computing, and sensing. Current optical interconnects rely on edge or grating couplers with limitations in terms of alignment tolerances, efficiency, and bandwidth, respectively. Here, we present a scalable coupling concept that allows fiber-to-chip coupling to the fundamental transverse electric and transverse magnetic modes based on three-dimensional nanostructures exploiting total internal reflection. We demonstrate close to octave-spanning highly efficient coupling to nanophotonic waveguides in the visible wavelength range. Our coupling scheme can be adjusted for other wavelength regimes and fiber mode-field diameters.

Design study of random spectrometers for applications at optical frequencies.

Compact spectrometers based on disordered planar waveguides exhibit a rather high resolution with a relatively small footprint compared to conventional spectrometers. This is achieved by multiple scattering of light, which-if properly engineered-significantly enhances the effective optical path length. Here a design study of random spectrometers for TE- and TM-polarized light is presented that combines the results of Mie theory, multiple-scattering theory, and full electromagnetic simulations. It is shown that the performance of such random spectrometers depends on single-scattering quantities, notably on the overall scattering efficiency and the asymmetry parameter. Further, the study shows that a well-developed diffusive regime is not required in practice and that a standard integrated-optical layout is sufficient to obtain efficient devices even for rather weakly scattering systems consisting of low index inclusions in high-index matrices, such as pores in planar silicon-nitride-based waveguides. This allows for both significant reductions in footprint with acceptable losses in resolution and for device operation in the visible and near-infrared frequency range.

Mixed-Mode Operation of Hybrid Phase-Change Nanophotonic Circuits.

Phase change materials (PCMs) are highly attractive for nonvolatile electrical and all-optical memory applications because of unique features such as ultrafast and reversible phase transitions, long-term endurance, and high scalability to nanoscale dimensions. Understanding their transient characteristics upon phase transition in both the electrical and the optical domains is essential for using PCMs in future multifunctional optoelectronic circuits. Here, we use a PCM nanowire embedded into a nanophotonic circuit to study switching dynamics in mixed-mode operation. Evanescent coupling between light traveling along waveguides and a phase-change nanowire enables reversible phase transition between amorphous and crystalline states. We perform time-resolved measurements of the transient change in both the optical transmission and resistance of the nanowire and show reversible switching operations in both the optical and the electrical domains. Our results pave the way toward on-chip multifunctional optoelectronic integrated devices, waveguide integrated memories, and hybrid processing applications.

On-Chip Waveguide Coupling of a Layered Semiconductor Single-Photon Source.

Fully integrated quantum technology based on photons is in the focus of current research, because of its immense potential concerning performance and scalability. Ideally, the single-photon sources, the processing units, and the photon detectors are all combined on a single chip. Impressive progress has been made for on-chip quantum circuits and on-chip single-photon detection. In contrast, nonclassical light is commonly coupled onto the photonic chip from the outside, because presently only few integrated single-photon sources exist. Here, we present waveguide-coupled single-photon emitters in the layered semiconductor gallium selenide as promising on-chip sources. GaSe crystals with a thickness below 100 nm are placed on Si3N4 rib or slot waveguides, resulting in a modified mode structure efficient for light coupling. Using optical excitation from within the Si3N4 waveguide, we find nonclassicality of generated photons routed on the photonic chip. Thus, our work provides an easy-to-implement and robust light source for integrated quantum technology.

Hot-spot relaxation time current dependence in niobium nitride waveguide-integrated superconducting nanowire single-photon detectors.

We investigate how the bias current affects the hot-spot relaxation dynamics in niobium nitride. We use for this purpose a near-infrared pump-probe technique on a waveguide-integrated superconducting nanowire single-photon detector driven in the two-photon regime. We observe a strong increase in the picosecond relaxation time for higher bias currents. A minimum relaxation time of (22 ± 1) ps is obtained when applying a bias current of 50% of the switching current at 1.7 K bath temperature. We also propose a practical approach to accurately estimate the photon detection regimes based on the reconstruction of the measured detector tomography at different bias currents and for different illumination conditions.