Harnessing carboxymethyl cellulose and Moringa oleifera seed husks for sustainable treatment of a multi-metal real waste.

This study aimed to evaluate effective treatment strategies for laboratory waste with an initial pH of 1.0, containing Cr6+, Mn2+, Co2+, Fe3+, Ni2+, Cu2+, Zn2+, Sr2+, Hg2+, and Pb2+ ions, focusing on flocculation, precipitation, and adsorption techniques. The study utilized microparticles derived from Moringa oleifera seed husks (MS), cryogels of carboxymethyl cellulose (CMC), and hybrid cryogels combining CMC and MS (CMC-MS25 and CMC-MS50) as adsorbents. The optimal strategy involved raising the pH to 7 using NH4OH, leading to the partial precipitation of metal ions. The remaining supernatant was then passed through columns packed with the aforementioned adsorbents. Utilizing CMC-MS25 and CMC-MS50 adsorbents resulted in the simultaneous removal of over 90% of the targeted metal ions. The adsorption of Cu2+ ions onto the adsorbents was facilitated by electrostatic interactions between Cu2+ ions and carboxylate groups, as well as Cu-OH chelation, as confirmed by X-ray photoelectron spectroscopy. Under optimized conditions, the fixed-bed column adsorption capacity was determined as 88.2 mg g-1. The CMC-MS25 adsorbents proved reusable at least 5 times, with the recovered Cu2+ ions potentially suitable for other processes. The scalability and feasibility of producing these novel adsorbents suggest a promising, cost-effective solution for treating complex matrices and recovering high-value metals, as copper.

Multifunctional cellulose beads and their interaction with gram positive bacteria.

Cellulose beads with ∼3 mm of diameter and high circularity were obtained by dripping cellulose solutions (5, 6, and 7 wt %) dissolved in NaOH7%/urea12%, into HCl 2 M coagulation bath. Carboxylic groups were generated on beads surface through NaClO/NaClO2/TEMPO oxidation method, achieving total charge density of ∼0.77 mmol/g. Pristine (CB) and oxidized (OCB) beads were characterized by means of optical images analyses, scanning electron microscopy (SEM) and compression tests. Both types of beads, CB and OCB, were used as adsorbent for poly(4-vinyl-N-pentylpyridinium) bromide, QPVP-C5, a bactericidal agent. The adsorption of QPVP-C5 on CB and OCB was evaluated by means of FTIR-ATR, UV-vis, CHN elemental analyses, and X-ray photoelectron spectroscopy (XPS). The adsorbed amount of QPVP-C5 was remarkably higher on OCB than on CB due to ionic interactions. Desorption was less than 5%. The interaction between neat OCB or OCB coated and two different amounts of QPVP-C5 and Gram-positive bacteria Micrococcus luteus was assessed by changes in turbidimetry, SEM, and elemental analyses. Bacteria adsorbed on the surface of neat OCB and weakly QPVP-C5 coated OCB due to hydrogen bonding or ion-dipole interaction. Notorious bactericidal action was observed for OCB samples coated with large amount of QPVP-C5.

Catalytic behavior of lipase immobilized onto congo red and PEG-decorated particles.

Poly(ethylene glycol) (PEG)-decorated polystyrene (PS) nanoparticles with mean hydrodynamic diameter (D) and zeta-potential (ζ) of (286 ± 15) nm and (-50 ± 5) mV, respectively, were modified by the adsorption of Congo red (CR). The PS/PEG/CR particles presented D and ζ values of (290 ± 19) nm and (-36 ± 5) mV, respectively. The adsorption of lipase onto PS/PEG or PS/PEG/CR particles at (24 ± 1) °C and pH 7 changed the mean D value to (380 ± 20) and (405 ± 11) nm, respectively, and ζ value to (-32 ± 4) mV and (-25 ± 2) mV, respectively. The kinetic parameters of the hydrolysis of p-nitrophenyl butyrate were determined for free lipase, lipase immobilized onto PS/PEG and PS/PEG/CR particles. Lipase on PS/PEG/CR presented the largest Michaelis-Menten constant (KM), but also the highest Vmax and kcat values. Moreover, it could be recycled seven times, losing a maximum 10% or 30% of the original enzymatic activity at 40 °C or 25 °C, respectively. Although lipases immobilized onto PS/PEG particles presented the smallest KM values, the reactions were comparatively the slowest and recycling was not possible. Hydrolysis reactions performed in the temperature range of 25 °C to 60 °C with free lipases and lipases immobilized onto PS/PEG/CR particles presented an optimal temperature at 40 °C. At 60 °C free lipases and lipases immobilized onto PS/PEG/CR presented ~80% and ~50% of the activity measured at 40 °C, indicating good thermal stability. Bioconjugation effects between CR and lipase were evidenced by circular dichroism spectroscopy and spectrophotometry. CR molecules mediate the open state conformation of the lipase lid and favor the substrate approaching.

Improved anti-inflammatory properties of xanthan gum hydrogel physically and chemically modified with yeast derived peptide.

Bioactive peptides from natural resources with associated beneficial biological properties such as skin wound healing have drawn much attention. Polysaccharides with their biocompatibility, biodegradability, and ease of modification are suitable carriers for peptides delivery to the wound. In this study, a polysaccharide-peptide system was designed for potential wound healing applications. Xanthan hydrogels were modified with the yeast-derived peptide VW-9 with known biological properties via chemical conjugation using carbodiimide chemistry (XG-g-VW-9) or physically incorporation (XG-p-VW-9). Grafting VW-9 to the hydrogels increased the hydrogels' swelling degree and the release of the peptide from the hydrogels followed the Higuchi model indicating the peptide diffusion from the hydrogel matrix without hydrogel matrix dissolution. Both hydrogels were cytocompatible toward the tested fibroblast and macrophage cells. XG-p-VW-9 and XG-g-VW-9 reduce the level of tumor necrosis factor-alpha and interleukin-6 in cells activated with lipopolysaccharide more efficiently than free VW-9. Thus, VW-9-modified xanthan hydrogels may have the potential to be considered for skin wound healing.

Rheological and mechanical properties of hydroxypropyl methylcellulose-based hydrogels and cryogels controlled by AOT and SDS micelles.

HYPOTHESIS: The type and concentration of surfactants affect the rheological behavior of hydroxypropyl methylcellulose (HPMC) chains in hydrogels, influencing the microstructure and mechanical properties of HPMC cryogels. EXPERIMENTS: Hydrogels and cryogels containing HPMC, AOT (bis (2-ethylhexyl) sodium sulfosuccinate or dioctyl sulfosuccinate salt sodium, two C8 chains and sulfosuccinate head group), SDS (sodium dodecyl sulfate, one C12 chain and sulfate head group), and sodium sulfate (salt, no hydrophobic chain) at different concentrations were investigated using small-angle X-ray scattering (SAXS), scanning electron microscopy (SEM), rheological measurements, and compressive tests. FINDINGS: SDS micelles bound to the HPMC chains building "bead necklaces", increasing considerably the storage modulus G' values of the hydrogels and the compressive modulus E values of the corresponding cryogels. The dangling SDS micelles promoted multiple junction points among the HPMC chains. AOT micelles and HPMC chains did not form "bead necklaces". Although AOT increased the G' values of the hydrogels, the resulting cryogels were softer than pure HPMC cryogels. The AOT micelles are probably embedded between HPMC chains. The AOT short double chains rendered softness and low friction to the cryogel cell walls. Therefore, this work demonstrated that the structure of the surfactant tail can tune the rheological behavior of HPMC hydrogels and hence the microstructure of the resulting cryogels.

Caffeine Release from Magneto-Responsive Hydrogels Controlled by External Magnetic Field and Calcium Ions and Its Effect on the Viability of Neuronal Cells.

Caffeine (CAF) is a psychostimulant present in many beverages and with rapid bioabsorption. For this reason, matrices that effectuate the sustained release of a low amount of CAF would help reduce the intake frequency and side effects caused by high doses of this stimulant. Thus, in this study, CAF was loaded into magnetic gelatin/alginate (Gel/Alg/MNP) hydrogels at 18.5 mg/ghydrogel. The in vitro release of CAF was evaluated in the absence and presence of an external magnetic field (EMF) and Ca2+. In all cases, the presence of Ca2+ (0.002 M) retarded the release of CAF due to favorable interactions between them. Remarkably, the release of CAF from Gel/Alg/MNP in PBS/CaCl2 (0.002 M) at 37 °C under an EMF was more sustained due to synergic effects. In PBS/CaCl2 (0.002 M) and at 37 °C, the amounts of CAF released after 45 min from Gel/Alg and Gel/Alg/MNP/EMF were 8.3 ± 0.2 mg/ghydrogel and 6.1 ± 0.8 mg/ghydrogel, respectively. The concentration of CAF released from Gel/Alg and Gel/Alg/MNP hydrogels amounted to ~0.35 mM, thereby promoting an increase in cell viability for 48 h. Gel/Alg and Gel/Alg/MNP hydrogels can be applied as reservoirs to release CAF at suitable concentrations, thus forestalling possible side effects and improving the viability of SH-SY5Y cells.

Efficiency of air-dried and freeze-dried alginate/xanthan beads in batch, recirculating and column adsorption processes.

Alginate (Alg) beads are low-cost adsorbents used for wastewater remediation. In this work, alginate (Alg) and alginate/xanthan (Alg/XG) blend beads were synthesized by gelation method into calcium chloride and freeze-dried to improve the porosity. Their adsorption efficiency was tested for methylene blue (MB) dye in batch, recirculating and column adsorption systems. The blend beads were characterized using by SEM, FTIR-ATR and X-ray microcomputer tomography (Micro-CT) analyzes. Freeze-dried Alg and Alg/XG beads presented porosity of 46 ± 5% and 77 ± 3%, respectively. Adsorption isotherms of MB on freeze-dried Alg/XG beads indicated better adsorption capacity in comparison to the air-dried ones. Adsorption kinetics and breakthrough curves based on recirculating and vertical column adsorption processes of MB on freeze dried Alg/XG and air-dried Alg/XG beads indicated higher efficiency for the vertical column system packed with freeze dried Alg/XG beads. The removal efficiency of 91% MB by the freeze-dried Alg/XG beads in vertical column remained even after four consecutive adsorption-desorption cycles, disclosing these beads as potential systems for the wastewater treatment.

Flexible translucent persistent luminescent films based on Sr2MgSi2O7:Eu2+,Dy3+ cellulose ether composites.

Persistent luminescent materials are present in several recent studies on new applications and novel properties. In this work, we demonstrate, for the first time, the production of translucent flexible persistent composites based on Sr2MgSi2O7:Eu2+,Dy3+ (SMSO) into cellulose ether matrix film. The composite was successfully prepared through a new optimized route of co-precipitation and microwave-assisted annealing followed by (3-aminopropyl)triethoxysilane (APTES) coating and dispersion in hydroxypropyl methylcellulose (HPMC). The SMSO@APTES/HPMC films show persistent luminescence emission at 475 nm (blue) and high transmittance in the visible range. To understand the fine distribution of the nanoparticles in the matrix, we have investigated their structure and dispersion by using Synchrotron Radiation X-ray fluorescence mapping and Scanning Transmission X-ray Microscopy. This innovative composite could bring new perspectives for the class of persistent luminescence materials, enhancing technologies in progress throwing light on new applications never perceived.

Vanillin crosslinked chitosan films: The states of water and the effect of carriers on curcumin uptake.

In this work, chitosan chains were crosslinked with different contents of vanillin (Van), characterized and loaded with curcumin (CUR), a hydrophobic drug. Sodium dodecyl sulfate (SDS), Tween 20® (T20) and ß-cyclodextrin (ßCD) were used as curcumin carriers. Films prepared with Van 20 % yielded gel content of 70 %, swelling degree of ~23 gwater/g, bound water and capillary water, as revealed by Time-Domain Nuclear Magnetic Resonance measurements. Films prepared with higher Van contents showed small swelling degree (< 1.6 gwater/g) and hydrophobicity, making them inadequate for drug loading. UV-Vis and fluorescence spectroscopic studies indicated that Van 20 % combined with SDS and SDS/ßCD presented the highest CUR uptake (~3.0 mg/g), favored by electrostatic interactions and hydrophobic interactions. CHI and Van 20 % films did not present any cytotoxicity in human neuroblastoma SH-SY5Y cells. At pH 1.0 the films were completely soluble, pointing to their potential application as gastric delivery systems for hydrophobic drugs. Chemical compounds studied in the manuscript: Chitosan, vanillin, curcumin, ß-cyclodextrin, sodium dodecyl sulfate, polyethylene glycol sorbitan monolaurate.

Effects of Magnetite Nanoparticles and Static Magnetic Field on Neural Differentiation of Pluripotent Stem Cells.

Neurodevelopmental processes of pluripotent cells, such as proliferation and differentiation, are influenced by external natural forces. Despite the presence of biogenic magnetite nanoparticles in the central nervous system and constant exposure to the Earth's magnetic fields and other sources, there is scant knowledge regarding the role of electromagnetic stimuli in neurogenesis. Moreover, emerging applications of electrical and magnetic stimulation to treat neurological disorders emphasize the relevance of understanding the impact and mechanisms behind these stimuli. Here, the effects of magnetic nanoparticles (MNPs) in polymeric coatings and the static external magnetic field (EMF) were investigated on neural induction of murine embryonic stem cells (mESCs) and human induced pluripotent stem cells (hiPSCs). The results show that the presence of 0.5% MNPs in collagen-based coatings facilitates the migration and neuronal maturation of mESCs and hiPSCs in vitro. Furthermore, the application of 0.4 Tesla EMF perpendicularly to the cell culture plane, discernibly stimulates proliferation and guide fate decisions of the pluripotent stem cells, depending on the origin of stem cells and their developmental stage. Mechanistic analysis reveals that modulation of ionic homeostasis and the expression of proteins involved in cytostructural, liposomal and cell cycle checkpoint functions provide a principal underpinning for the impact of electromagnetic stimuli on neural lineage specification and proliferation. These findings not only explore the potential of the magnetic stimuli as neural differentiation and function modulator but also highlight the risks that immoderate magnetic stimulation may affect more susceptible neurons, such as dopaminergic neurons.

Adsorption behavior of hydrophobically modified polyelectrolytes onto amino- or methyl-terminated surfaces.

The adsorption of hydrophobically modified polyelectrolytes derived from poly(maleic anhydride-alt-styrene) (P(MA-alt-St)) containing in their side chain aryl-alkyl groups onto amino- or methyl-terminated silicon wafers was investigated. The effect of the spacer group, the chemical nature of the side chain, molecular weight of polyelectrolyte, and ionic strength of solution on the polyelectrolyte adsorbed amount was studied by null ellipsometry. The adsorbed amount of polyelectrolyte increased with increasing ionic strength, in agreement with the screening-enhanced adsorption regime, indicating that hydrophobic interactions with the surface play an important role in the adsorption process. At constant ionic strength, the adsorbed amount was slightly higher for polyelectrolytes with larger alkyl side chain and decreased with the hydrophobicity of aryl group. The adsorption behavior is discussed in terms of the side chain flexibility of the polymer. Characteristics of the adsorbed layer were studied by atomic force microscopy (AFM) and contact angle measurements. AFM images show the presence of aggregates and closed globular structure of polyelectrolyte onto the amino- or methyl-terminated surface, which agrees with a 3D and 2D growth mechanism, respectively. Fluorescence measurements showed that the aggregation of polyelectrolyte containing the hydrophobic naphthyl group occurs already in the solution. However, the aggregation of polyelectrolytes containing the phenyl group in its side chain is not observed in solution but is induced by the amino-terminated surface. This difference can be explained in terms of the higher flexibility of side chain bearing the phenyl group. The polyelectrolyte films showed a high chemical heterogeneity and moderate hydrophobicity.

Tuning the Mechanical and Thermal Properties of Hydroxypropyl Methylcellulose Cryogels with the Aid of Surfactants.

The mechanical and thermal properties of cryogels depend on their microstructure. In this study, the microstructure of hydroxypropyl methylcellulose (HPMC) cryogels was modified by the addition of ionic (bis (2-ethylhexyl) sodium sulfosuccinate, AOT) and non-ionic (Kolliphor® EL) surfactants to the precursor hydrogels (30 g/L). The surfactant concentrations varied from 0.2 mmol/L to 3.0 mmol/L. All of the hydrogels presented viscous behavior (G″ > G'). Hydrogels containing AOT (c > 2.0 mmol/L) led to cryogels with the lowest compressive modulus (13 ± 1 kPa), the highest specific surface area (2.31 m2/g), the lowest thermal conductivity (0.030 W/(m·°C)), and less hygroscopic walls. The addition of Kolliphor® EL to the hydrogels yielded the stiffest cryogels (320 ± 32 kPa) with the lowest specific surface area (1.11 m2/g) and the highest thermal conductivity (0.055 W/(m·°C)). Density functional theory (DFT) calculations indicated an interaction energy of -31.8 kcal/mol due to the interaction between the AOT sulfonate group and the HPMC hydroxyl group and the hydrogen bond between the AOT carbonyl group and the HPMC hydroxyl group. The interaction energy between the HPMC hydroxyl group and the Kolliphor® EL hydroxyl group was calculated as -7.91 kcal/mol. A model was proposed to describe the effects of AOT or Kolliphor® EL on the microstructures and the mechanical/thermal properties of HPMC cryogels.

Protein adsorption onto polyelectrolyte layers: effects of protein hydrophobicity and charge anisotropy.

Ellipsometry was used to investigate the influence of ionic strength (I) and pH on the adsorption of bovine serum albumin (BSA) or beta-lactoglobulin (BLG) onto preabsorbed layers of two polycations: poly(diallyldimethylammonium chloride) (PDADMAC) or poly(4-vinylpyridine bromide) quaternized with linear aliphatic chains of two (QPVP-C2) or five (QPVP-C5) carbons. Comparisons among results for the three polycations reveal hydrophobic interactions, while comparisons between BSA and BLG-proteins of very similar isoelectric points (pI)-indicate the importance of protein charge anisotropy. At pH close to pI, the ionic strength dependence of the adsorbed amount of protein (Gamma) displayed maxima in the range 10 < I < 25 mM corresponding to Debye lengths close to the protein radii. Visualization of protein charge by Delphi suggested that these ionic strength conditions corresponded to suppression of long-range repulsion between polycations and protein positive domains, without diminution of short-range attraction between polycation segments and locally negative protein domains, in a manner similar to the behavior of PE-protein complexes in solution. (1-4) This description was consistent with the disappearance of the maxima at pH either above or below pI. In the former case, Gamma values decrease exponentially with I(1/2), due to screening of attractions, while in the latter case adsorption of both proteins decreased at low I due to strong repulsion. Close to or below pI both proteins adsorbed more strongly onto QPVP-C5 than onto QPVP-C2 or PDADMAC due to hydrophobic interactions with the longer alkyl group. Above pI, the adsorption was more pronounced with PDADMAC because these chains may assume more loosely bound layers due to lower linear charge density.

The states of water in tryptophan grafted hydroxypropyl methylcellulose hydrogels and their effect on the adsorption of methylene blue and rhodamine B.

Tryptophan (Trp) decorated hydroxypropyl methylcellulose (HPMC) cryogels were prepared by a one-step reaction with citric acid. The increase of Trp content in the 3D network from 0 to 2.18 wt% increased the apparent density from 0.0267 g.cm-3 to 0.0381 g.cm-3 and the compression modulus from 94 kPa to 201 kPa, due to hydrophobic interactions between Trp molecules. The increase of Trp content in HPMC-Trp hydrogels increased the amount of non-freezing water, estimated from differential scanning calorimetry, and the amount of freezing water, which was determined by time-domain nuclear magnetic resonance. The adsorption capacity of methylene blue (MB) and rhodamine B (RB) on HPMC-Trp hydrogels increased with Trp content and the amount of freezing water. HPMC-Trp hydrogels could be recycled 6 times keeping the original adsorptive capacity. The diffusional constants of MB and RB tended to increase with Trp content. RB adsorbed on HPMC-Trp hydrogels presented a bathochromic shift of fluorescence.

Synthesis and characterization of magnetic composites based on cis-polyisoprene and CoFe2O4 nanoparticles.

CoFe2O4 nanoparticles were obtained by the co-precipitation method. They were further modified by the adsorption of ricinoleic acid (RA). The non-modified and modified CoFe2O4/RA nanoparticles were characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman, and Fourier transform infrared (FTIR) spectroscopy. The modified particles present a mean diameter < 20 nm. The adsorption of RA on the CoFe2O4 surface is characterized by the IR absorptions of the RA while in the Raman spectrum the predominant signals are those from the CoFe2O4. The cis-polyisoprene (PI) composite was prepared by dissolving PI in cyclohexane followed by the addition of a magnetic fluid based on CoFe2O4/RA nanoparticles dispersed in cyclohexane. After solvent evaporation a magnetic composite was obtained and characterized by AFM, Raman, and FTIR measurements. AFM images show uniformly CoFe2O4/RA particles distributed in the PI matrix. Raman spectra obtained for the composites reveal the characteristic Raman peaks of PI and CoFe2O4 nanoparticles.

Hydrophilic, hydrophobic, Janus and multilayer xanthan based cryogels.

Xanthan gum (XG) was applied for the creation of hydrophilic, hydrophobic and layered cryogels. Firstly, the correlation among synthesis parameters, such as solvent composition and polymer concentration (Cp) in the precursor gel and mold diameter (Φ), with physicochemical properties and morphological parameters of resulting hydrophilic XG cryogels was investigated. The addition of acetic acid to the precursor led to stiffer XG cryogels. The reduction of Cp and Φ promoted the increase in the cryogels surface area and porosity. Then, XG cryogels were silanized in order to produce hydrophobic cryogels, which presented sorption capacities for diesel, mineral and sunflower oils of 28 ±â€¯2 g/g, 16 ±â€¯2 g/g and 5.2 ±â€¯0.3 g/g, respectively. The hydrophobic XG cryogels were considerably more efficient to remove ethinyl estradiol, an estrogenic pollutant, from liquid media than the hydrophilic cryogels. Hydrophilic and hydrophobic XG cryogels presented similar capacity to remove bisphenol A, another estrogenic pollutant, from liquid media. A new family of alternated hydrophobic/hydrophilic "Janus" like and multilayered cryogels was created and applied in mixtures of diesel oil and water or oil/water emulsions. The "Janus" like and multilayered cryogels remained at the interface, where the hydrophobic and hydrophilic layers adsorbed oil and water selectively.

Development of a methodology for reversible chemical modification of silicon surfaces with application in nanomechanical biosensors.

Hypervalent tellurium compounds have a particular reactivity towards thiol compounds which are related to their biological properties. In this work, this property was assembled to tellurium-functionalized surfaces. These compounds were used as linkers in the immobilization process of thiolated biomolecules (such as DNA) on microcantilever surfaces. The telluride derivatives acted as reversible binding agents due to their redox properties, providing the regeneration of microcantilever surfaces and allowing their reuse for further biomolecules immobilizations, recycling the functional surface. Initially, we started from the synthesis of 4-((3-((4-methoxyphenyl) tellanyl) phenyl) amino)-4-oxobutanoic acid, a new compound, which was immobilized on a silicon surface. In nanomechanical systems, the detection involved a hybridization study of thiolated DNA sequences. Fluorescence microscopy technique was used to confirm the immobilization and removal of the telluride-DNA system and provided revealing results about the potentiality of applying redox properties to chalcogen derivatives at surfaces.

Interactions between bacteriophage DNA and cationic biomimetic particles.

The interaction between giant bacteriophage DNA and cationic biomimetic particles was characterized from sizing by dynamic light-scattering, zeta-potential analysis, turbidimetry, determination of colloid stability, visualization from atomic force microscopy (AFM), and determination of cytotoxicity against E. coli from colony forming unities counting. First, polystyrene sulfate (PSS) particles with different sizes were covered by a dioctadecyldimethylammonium bromide (DODAB) bilayer yielding the so-called cationic biomimetic particles (PSS/DODAB). These cationic particles are highly organized, present a narrow size distribution and were obtained over a range of particle sizes. Thereafter, upon adding lambda, T5 or T2-DNA to PSS/DODAB particles, supramolecular assemblies PSS/DODAB/DNA were obtained and characterized over a range of DNA concentrations and particle sizes (80-700 nm). Over the low DNA concentration range, PSS/DODAB/ DNA assemblies were cationic, colloidally stable with moderate polydispersity and highly cytotoxic against E. coli. From DNA concentration corresponding to charge neutralization, neutral or anionic supramolecular assemblies PSS/DODAB/DNA exhibited low colloid stability, high polydispersity and moderate cytotoxicity. Some nucleosome mimetic assemblies were observed by AFM at charge neutralization (zeta-potential equal to zero).

Hybrid materials from intermolecular associations between cationic lipid and polymers.

Intermolecular associations between a cationic lipid and two model polymers were evaluated from preparation and characterization of hybrid thin films cast on silicon wafers. The novel materials were prepared by spin-coating of a chloroformic solution of lipid and polymer on silicon wafer. Polymers tested for miscibility with the cationic lipid dioctadecyldimethylammonium bromide (DODAB) were polystyrene (PS) and poly(methyl methacrylate) (PMMA). The films thus obtained were characterized by ellipsometry, wettability, optical and atomic force microscopy, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and activity against Escherichia coli. Whereas intermolecular ion-dipole interactions were available for the PMMA-DODAB interacting pair producing smooth PMMA-DODAB films, the absence of such interactions for PS-DODAB films caused lipid segregation, poor film stability (detachment from the silicon wafer) and large rugosity. In addition, the well-established but still remarkable antimicrobial DODAB properties were transferred to the novel hybrid PMMA/DODAB coating, which is demonstrated to be highly effective against E. coli.

Lectins and/or xyloglucans/alginate layers as supports for immobilization of dengue virus particles.

Formation of stable thin films of mixed xyloglucan (XG) and alginate (ALG) onto Si/SiO(2) wafers was achieved under pH 11.6, 50mM CaCl(2), and at 70 degrees C. XG-ALG films presented mean thickness of (16+/-2)nm and globules rich surface, as evidenced by means of ellipsometry and atomic force microscopy (AFM), respectively. The adsorption of two glucose/mannose-binding seed (Canavalia ensiformis and Dioclea altissima) lectins, coded here as ConA and DAlt, onto XG-ALG surfaces took place under pH 5. Under this condition both lectins present positive net charge. ConA and DAlt adsorbed irreversibly onto XG-ALG forming homogenous monolayers approximately (4+/-1)nm thick. Lectins adsorption was mainly driven by electrostatic interaction between lectins positively charged residues and carboxylated (negatively charged) ALG groups. Adhesion of four serotypes of dengue virus, DENV (1-4), particles to XG-ALG surfaces were observed by ellipsometry and AFM. The attachment of dengue particles onto XG-ALG films might be mediated by (i) H bonding between E protein (located at virus particle surface) polar residues and hydroxyl groups present on XG-ALG surfaces and (ii) electrostatic interaction between E protein positively charged residues and ALG carboxylic groups. DENV-4 serotype presented the weakest adsorption onto XG-ALG surfaces, indicating that E protein on DENV-4 surface presents net charge (amino acid sequence) different from E proteins of other serotypes. All four DENV particles serotypes adsorbed similarly onto lectin films adsorbed. Nevertheless, the addition of 0.005mol/L of mannose prevented dengue particles from adsorbing onto lectin films. XG-ALG and lectin layers serve as potential materials for the development of diagnostic methods for dengue.