Optimizing Ultrasonic-Assisted and Microwave-Assisted Extraction Processes to Recover Phenolics and Flavonoids from Passion Fruit Peels.

This study optimized the ultrasonic-assisted extraction (UAE) and microwave-assisted extraction (MAE) processes to acquire phenolics and flavonoids from passion fruit peels using a mixture of ethanol, acetone, and water. An augmented simplex-centroid design was employed to find the suitable volume ratio among solvent ingredients to attain the highest extraction yield of phenolics and flavonoids. One-factor experiments were conducted to investigate the influence of UAE and MAE parameters on the recovery yield of phenolics and flavonoids before the two processes were optimized using Box-Behnken Design (BBD) models. The optimal UAE conditions for recovering phenolics and flavonoids from passion fruit peel powder (PFP) were 28 mL/g of liquid-to-solid ratio (LSR), 608 W of ultrasonic power, and 63 °C for 20 min to acquire total phenolic content (TPC) and total flavonoid content (TFC) at 39.38 mg of gallic acid equivalents per gram of dried basis (mg GAE/g db) and 25.79 mg of rutin equivalents per gram of dried basis (mg RE/g db), respectively. MAE conditions for attaining phenolics and flavonoids from PFP were 26 mL/g of LSR and 606 W of microwave power for 2 min to recover TPC and TFC at 17.74 mg GAE/g db and 8.11 mg RE/g db, respectively. The second-order kinetic model was employed to determine the UAE and MAE mechanism of TPC and TFC and the thermodynamic parameters of the extraction processes. The antioxidant activities of passion fruit peel extracts at optimal conditions were examined to compare the efficiency of UAE and MAE. This study establishes an effective approach for obtaining phenolics and flavonoids from passion fruit peels.

Producing bacterial cellulose from industrial recycling paper waste sludge.

This study aimed to produce bacterial cellulose from paper waste sludge (PWS) as a method of utilizing the cellulose source from the remaining pulp in the material. Initially, PWS was hydrolyzed by sulfuric acid to create an enriched-reducing sugar hydrolysate. One-factor experiments were conducted with a fixed amount of PWS (5 g) to investigate the influence of hydrolysis conditions, including water, sulfuric acid addition, temperature, and retention time, on the production yield of reducing sugars. Based on these results, the Box-Behnken model was designed to optimize the hydrolysis reaction. The optimal hydrolysis conditions were 10 ml/g of the sulfuric acid solution (30.9%) at 105.5 °C for 90 min of retention time 0.81 (gGE/g PWS), corresponding to a conversion yield of 40.5%). Subsequently, 100 ml of the filtered and neutralized PWS hydrolysate was used as the culture to produce the bacterial cellulose (BC) using Acetobacter xylinum, which produced 12 g/L of bacterial cellulose. The conversion yield of bacterial cellulose calculated as the ratio of the weight of produced bacterial cellulose to that of cellulose in PWS reached 33.3%. The structure of the obtained BC was analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD) to indicate the formation of nano-cellulose fiber networks. This research proposed a combined method to convert paper waste sludge into bacterial cellulose, demonstrating the potential for waste utilization and sustainable production of paper industries for added-value products.

Green extraction of phenolics and flavonoids from black mulberry fruit using natural deep eutectic solvents: optimization and surface morphology.

This study deployed ultrasonic-assisted extraction (UAE), combined with natural deep eutectic solvents (NADES), to extract phenolics and flavonoids from the black mulberry fruit, and the antioxidant activity was examined. The extraction yields of NADES-based UAE were assessed based on the yields of phenolics and flavonoids extracted from the black mulberry fruit. This study selected the molar ratios of hydrogen bond acceptors (HBA) and hydrogen bond donors HBD at 1:2 from previous studies. Choline chloride-lactic acid showed the highest solubility with phenolics and flavonoids among NADES systems. One-factor experiments evaluated the effect of UAE conditions (liquid-to-solid ratio (LSR), water content in NADES, temperature, and time) on TPC, TFC, and antioxidant activity. The suitable NADES-based UAE conditions for extracting phenolics and flavonoids from the black mulberry fruit were 60 ml/g of LSR, 40% water content, 70 °C, and 15 min. Response surface methodology with the Box-Behnken design model optimized the NADES-based UAE process based on response (TPC, TFC, ABTS, OH, and DPPH). The optimal conditions for the NADES-based UAE process were 70 ml/g of LSR, 38.9% water content in NADES, 67.9 °C, and 24.2 min of extraction time. The predicted values of the Box-Behnken design were compatible with the experimental results. Moreover, scanning electron microscopy (SEM) was used to survey the surface of black mulberry fruit with and without sonication. SEM can assist in demonstrating the destructive effect of NADES and ultrasonic waves on material surfaces. SEM findings indicated the high surface destruction capacity of NADES, which partially contributed to a superior extraction yield of NADES than conventional organic solvents. The study proposes an efficient and green method for extracting bioactive compounds from black mulberry fruits. The black mulberry fruit extracts can be applied to meat preservation and beverages with high antioxidants.

Extraction and Emulsification of Carotenoids from Carrot Pomaces Using Oleic Acid.

This study aimed to use oleic acid-based ultrasonic-assisted extraction (UAE) to recover carotenoids from carrot pomace and emulsify the enriched-carotenoid oleic acid using spontaneous and ultrasonic-assisted emulsification. The extraction performance of oleic acid was compared with traditional organic solvents, including hexane, acetone, and ethyl acetate. The one-factor experiments were employed to examine the impact of UAE conditions, including liquid-to-solid ratios, temperature, ultrasonic power, and time, on the extraction yield of carotenoids and to find the conditional ranges for the optimization process. The response surface methodology was employed to optimize the UAE process. The second-order extraction kinetic model was used to find the mechanism of oleic acid-based UAE. After that, the enriched-carotenoid oleic acid obtained at the optimal conditions of UAE was used to fabricate nanoemulsions using spontaneous emulsification (SE), ultrasonic-assisted emulsification (UE), and SE-UE. The effect of SE and UE conditions on the turbidity of nanoemulsion was determined. Then, the physiochemical attributes of the nanoemulsion from SE, UE, and spontaneous ultrasonic-assisted emulsification (SE-UE) were determined using the dynamic light scattering method. The extraction yield of carotenoids from carrot pomace by using sonication was the highest. The adjusted optimal conditions were 39 mL/g of LSR, 50 °C, 12.5 min, and 350 W of ultrasonic power. Under optimal conditions, the carotenoid content attained was approximately 163.43 ± 1.83 µg/g, with the anticipated value (166 µg/g). The particle sizes of nanoemulsion fabricated at the proper conditions of SE, UE, and SE-UE were 31.2 ± 0.83, 33.8 ± 0.52, and 109.7 ± 8.24 nm, respectively. The results showed that SE and UE are suitable methods for fabricating nanoemulsions. The research provided a green approach for extracting and emulsifying carotenoids from carrot pomace.

Optimized Cellulase-Hydrolyzed Deoiled Coconut Cake Powder as Wheat Flour Substitute in Cookies.

Deoiled coconut cake powder (DCCP) was hydrolyzed to reduce the ratio of insoluble/soluble dietary fiber (RIS) by partially converting insoluble dietary fiber to soluble using Celluclast 1.5 L, a commercial cellulase preparation in citrate buffer medium. Firstly, the influence of citrate buffer amount, enzyme concentration, pH, and retention time on the enzymatic hydrolysis efficiency was investigated. Then, response surface methodology (RSM) was employed to optimize the process in which the insoluble and soluble dietary fiber contents were the responses. The results revealed that 10.3 g buffer/g of materials, 3.7 U/g of the materials, and 60 min of retention time were the optimal conditions for the enzymatic hydrolysis to obtain the insoluble and soluble contents of 68.21%db and 8.18%db, respectively. Finally, DCCP or hydrolyzed DCCP (HDCCP) was partially substituted for wheat flour at different replacement ratios in a cookie recipe at 0, 10, 20, 30, and 40%. The cookies with a 10% replacement ratio of hydrolyzed deoiled coconut cake powders had a lower RIS by more than two folds those of DCCP and had the same sensorial score as the control sample. This study proposed that Celluclast 1.5 L effectively reduced RIS by partially converting insoluble to soluble dietary fiber, improving the soluble dietary fiber content in fiber-enriched cookies.