Metal Organic Frameworks Synthesis: The Versatility of Triethylamine.

Metal Organic Frameworks (MOFs) are organic-inorganic hybrid materials with exceptionally customizable composition and properties. MOFs intrinsically possess open metal sites, tunable pore size/shape and an ultra-large specific surface area, and have obtained significant attention over the past 30 years. Furthermore, through the integration of functional moieties such as, molecules, functional groups, noble metal clusters and nanocrystals or nanoparticles into MOFs, the resulting composites have greatly enriched the physical and chemical properties of pure MOFs, enabling their application in a wider range of fields. Triethylamine (TEA) as an organic base has consistently played a fundamental role in the development of MOFs. In this Concept, the versatility of triethylamine when involved in the synthesis of MOFs is discussed. Four sections are used to elaborate on the role of TEA including: (1) Single crystal synthesis; (2) Size and morphology control; (3) Counterion of MOFs; (4) MOFs composites synthesis. In the last part, we highlight the potential of TEA for further developments.

One-Pot Synthesis of High-Capacity Sulfur Cathodes via In-Situ Polymerization of a Porous Imine-Based Polymer.

Lithium-ion batteries, essential for electronics and electric vehicles, predominantly use cathodes made from critical materials like cobalt. Sulfur-based cathodes, offering a high theoretical capacity of 1675 mAh g-1 and environmental advantages due to sulfur's abundance and lower toxicity, present a more sustainable alternative. However, state-of-the-art sulfur-based electrodes do not reach the theoretical capacities, mainly because conventional electrode production relies on mixing of components into weakly coordinated slurries. Consequently, sulfur's mobility leads to battery degradation-an effect known as the "sulfur-shuttle". This study introduces a solution by developing a microporous, covalently-bonded, imine-based polymer network grown in situ around sulfur particles on the current collector. The polymer network (i) enables selective transport of electrolyte and Li-ions through pores of defined size, and (ii) acts as a robust host to retain the active component of the electrode (sulfur species). The resulting cathode has superior rate performance from 0.1 C (1360 mAh g-1) to 3 C (807 mAh g-1). Demonstrating a high-performance, sustainable sulfur cathode produced via a simple one-pot process, our research underlines the potential of microporous polymers in addressing sulfur diffusion issues, paving the way for sulfur electrodes as viable alternatives to traditional metal-based cathodes.

PdRh-Sensitized Iron Oxide Ultrathin Film Sensors and Mechanistic Investigation by Operando TEM and DFT Calculation.

Metal oxide semiconductor (MOS) thin films are of critical importance to both fundamental research and practical applications of gas sensors. Herein, a high-performance H2 sensor based on palladium (Pd) and rhodium (Rh) co-functionalized Fe2 O3 films with an ultrathin thickness of 8.9 nm deposited by using atomic layer deposition is reported. The sensor delivers an exceptional response of 105.9 toward 10 ppm H2 at 230 °C, as well as high selectivity, immunity to humidity, and low detection limit (43 ppb), which are superior to the reported MOS sensors. Importantly, the Fe2 O3 film sensor under dynamic H2 detection is for the first time observed by operando transmission electron microscopy, which provides deterministic evidence for structure evolution of MOS during sensing reactions. To further reveal the sensing mechanism, density functional theory calculations are performed to elucidate the sensitization effect of PdRh catalysts. Mechanistic studies suggest that Pd promotes the adsorption and dissociation of H2 to generate PdHx , while Rh promotes the dissociation of oxygen adsorbed on the surface, thereby jointly promoting the redox reactions on the films. A wireless H2 detection system is also successfully demonstrated using the thin film sensors, certifying a great potential of the strategy to practical sensors.

Charge Storage Mechanism in Electrospun Spinel-Structured High-Entropy (Mn0.2 Fe0.2 Co0.2 Ni0.2 Zn0.2 )3 O4 Oxide Nanofibers as Anode Material for Li-Ion Batteries.

High-entropy oxides (HEOs) have emerged as promising anode materials for next-generation lithium-ion batteries (LIBs). Among them, spinel HEOs with vacant lattice sites allowing for lithium insertion and diffusion seem particularly attractive. In this work, electrospun oxygen-deficient (Mn,Fe,Co,Ni,Zn) HEO nanofibers are produced under environmentally friendly calcination conditions and evaluated as anode active material in LIBs. A thorough investigation of the material properties and Li+ storage mechanism is carried out by several analytical techniques, including ex situ synchrotron X-ray absorption spectroscopy. The lithiation process is elucidated in terms of lithium insertion, cation migration, and metal-forming conversion reaction. The process is not fully reversible and the reduction of cations to the metallic form is not complete. In particular, iron, cobalt, and nickel, initially present mainly as Fe3+ , Co3+ /Co2+ , and Ni2+ , undergo reduction to Fe0 , Co0 , and Ni0 to different extent (Fe < Co < Ni). Manganese undergoes partial reduction to Mn3+ /Mn2+ and, upon re-oxidation, does not revert to the pristine oxidation state (+4). Zn2+ cations do not electrochemically participate in the conversion reaction, but migrating from tetrahedral to octahedral positions, they facilitate Li-ion transport within lattice channels opened by their migration. Partially reversible crystal phase transitions are observed.

Impact of Surface Hydroxyl Groups on CuO Film Growth by Atomic Layer Deposition.

CuO-based nanostructures have been widely investigated in catalysis, sensing, and energy conversion and storage in recent years. The unique properties of these nanostructures are largely related to the morphology and crystallinity of CuO. The controlled deposition of conformal CuO thin films by atomic layer deposition (ALD) has remained challenging until now owing to the limited understanding of the nucleation behavior and growth process. Here, a novel ALD process for copper oxide was developed using copper(II) trifluoroacetylacetonate [Cu(tfacac)2] as the metal precursor. The nucleation and initial growth of a CuO film are strongly dependent on the surface OH concentration. A continuous particulate-like CuO film was grown on OH-abundant pristine SiO2 particles, whereas the surface of the annealed SiO2 particles (presenting mostly isolated OH groups) remained uncoated under the same growth conditions. Moreover, a uniform and conformal CuO film was grown on covalently functionalized CNTs under identical conditions as pristine SiO2 particles. This study provides a strategy for tailoring the structure and the properties of thin films via ALD, which is promising for designing well-tailored nanostructures for various applications.

Structure and magnetism of electrospun porous high-entropy (Cr1/5Mn1/5Fe1/5Co1/5Ni1/5)3O4, (Cr1/5Mn1/5Fe1/5Co1/5Zn1/5)3O4 and (Cr1/5Mn1/5Fe1/5Ni1/5Zn1/5)3O4 spinel oxide nanofibers.

High-entropy oxide nanofibers, based on equimolar (Cr,Mn,Fe,Co,Ni), (Cr,Mn,Fe,Co,Zn) and (Cr,Mn,Fe,Ni,Zn) combinations, were prepared by electrospinning followed by calcination. The obtained hollow nanofibers exhibited a porous structure consisting of interconnected nearly strain-free (Cr1/5Mn1/5Fe1/5Co1/5Ni1/5)3O4, (Cr1/5Mn1/5Fe1/5Co1/5Zn1/5)3O4 and (Cr1/5Mn1/5Fe1/5Ni1/5Zn1/5)3O4 single crystals with a pure Fd3̄m spinel structure. Oxidation state of the cations at the nanofiber surface was assessed by X-ray photoelectron spectroscopy and cation distributions were proposed satisfying electroneutrality and optimizing octahedral stabilization. The magnetic data are consistent with a distribution of cations that satisfies the energetic preferences for octahedral vs. tetrahedral sites and is random only within the octahedral and tetrahedral sublattices. The nanofibers are ferrimagnets with relatively low critical temperature more similar to cubic chromites and manganites than to ferrites. Replacing the magnetic cations Co or Ni with non-magnetic Zn lowers the critical temperature from 374 K (Cr,Mn,Fe,Co,Ni) to 233 and 105 K for (Cr,Mn,Fe,Ni,Zn) and (Cr,Mn,Fe,Co,Zn), respectively. The latter nanofibers additionally have a low temperature transition to a reentrant spin-glass-like state.

In vitro anti-obesity activity by pancreatic lipase inhibition - Simple HPLC approach using EVOO as natural substrate.

BACKGROUND: Pancreatic lipase (PL) is a key lipolytic enzyme in humans for the digestion and absorption of dietary fats. Thereby, PL is a well-recognized target in the management of obesity and its inhibition attracts the interest of researchers globally. The screening of new natural PL inhibitors as alternative strategy to the synthesis of chemical ones represents nowadays a hot topic in research. The main challenge in this matter is the lack of a universal analytical method allowing the monitoring of PL activity and the reliable quantification of lipid digestion products. RESULTS: The (normal phase)-high-performance liquid chromatography-evaporative light scattering detector [(NP)-HPLC-ELSD] method proposed in this work represents a direct and rapid strategy to simultaneously quantify the products obtained from in vitro PL digestion. As one of the main novelties, the triacylglycerol (TAG) fraction from extra-virgin olive oil was selected as natural substrate. The PL activity was measured by monitoring the levels of remaining TAGs and formed free fatty acids (FFAs), using Orlistat as known inhibitor. The method validation confirmed the adequacy of the analytical method for quantitative purposes, showing high recovery percentage values (between 99% and 103%) and low relative standard deviation (RSD%) values (between 2% and 7%) for triolein and oleic acid standard solutions, as well as appreciably low limit of detection (LOD) and limit of quantification (LOQ) values (respectively 58 and 177 ng mL-1 for triolein; 198 and 602 ng mL-1 for oleic acid). Finally, the developed HPLC-ELSD method was successfully applied to evaluate the inhibitory effect of a polyphenolic extract obtained from apple pomace. The results showed a comparable inhibition degree between a 4.0 mg mL-1 apple pomace solution and a 1.0 µg mL-1 Orlistat solution. CONCLUSION: The proposed innovative method reveals highly sensitive and simple to follow the fate of PL digestion, thus opening the way to further investigations in the research of new potentially anti-obesity compounds. © 2022 Society of Chemical Industry.

A Universal Synthesis Strategy for Tunable Metal-Organic Framework Nanohybrids.

Metal-organic frameworks (MOFs) with encapsulated nanoparticles (NPs) enjoy a vastly expanded application potential in catalysis, filtration, and sensing. The selection of particular modified core-NPs has yielded partial successes in overcoming lattice mismatch. However, restrictions on the choice of NPs not only limit the diversity, but also affect the properties of the hybrid materials. Here, we show a versatile synthesis strategy using a representative set of seven MOF-shells and six NP-cores that are fine-tuned to incorporate from single to hundreds of cores in mono-, bi-, tri- and quaternary composites. This method does not require the presence of any specific surface structures or functionalities on the pre-formed cores. Our key point is to regulate the diffusion rate of alkaline vapors that deprotonate organic linkers and trigger the controlled MOF-growth and encapsulation of NPs. This strategy is expected to pave the way for the exploration of more sophisticated MOF-nanohybrids.

Self-assembly Mechanism and Chiral Transfer in CuO Superstructures.

Chiral inorganic superstructures have received considerable interest due to the chiral communication between inorganic compounds and chiral organic additives. However, the demanding fabrication and complex multilevel structure seriously hinder the understanding of chiral transfer and self-assembly mechanisms. Herein, we use chiral CuO superstructures as a model system to study the formation process of hierarchical chiral structures. Based on a simple and mild synthesis route, the time-resolved morphology and the in situ chirality evolution could be easily followed. The morphology evolution of the chiral superstructure involves hierarchical assembly, including primary nanoparticles, intermediate bundles, and superstructure at different growth stages. Successive redshifts and enhancements of the CD signal support chiral transfer from the surface penicillamine to the inorganic superstructure. Full-field electro-dynamical simulations reproduced the structural chirality and allowed us to predict its modulation. This work opens the door to a large family of chiral inorganic materials where chiral molecule-guided self-assembly can be specifically designed to follow a bottom-up chiral transfer pathway.

Unconventional Extraction of Total Non-Polar Carotenoids from Pumpkin Pulp and Their Nanoencapsulation.

Pumpkin is considered a functional food with beneficial effects on human health due to the presence of interesting bioactives. In this research, the impact of unconventional ultrasound-assisted extraction (UAE) and microwave-assisted extraction techniques on the recovery of total non-polar carotenoids from Cucurbita moschata pulp was investigated. A binary (hexane:isopropanol, 60:40 v/v) and a ternary (hexane:acetone:ethanol, 50:25:25 v/v/v) mixture were tested. The extracts were characterized for their antioxidant properties by in vitro assays, while the carotenoid profiling was determined by high-performance liquid chromatography coupled with a diode array detector. UAE with the binary mixture (30 min, 45 °C) was the most successful extracting technique, taking into consideration all analytical data and their correlations. In parallel, solid lipid nanoparticles (SLN) were optimized for the encapsulation of the extract, using ß-carotene as a reference compound. SLN, loaded with up to 1% ß-carotene, had dimensions (~350 nm) compatible with increased intestinal absorption. Additionally, the ABTS ((2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) assay showed that the technological process did not change the antioxidant capacity of ß-carotene. These SLN will be used to load an even higher percentage of the extract without affecting their dimensions due to its liquid nature and higher miscibility with the lipid with respect to the solid ß-carotene.

Secondary Phosphine Oxide Functionalized Gold Clusters and Their Application in Photoelectrocatalytic Hydrogenation Reactions.

Ligands in ligand-protected metal clusters play a crucial role, not only because of their interaction with the metal core, but also because of the functionality they provide to the cluster. Here, we report the utilization of secondary phosphine oxide (SPO), as a new family of functional ligands, for the preparation of an undecagold cluster Au11-SPO. Different from the commonly used phosphine ligand (i.e., triphenylphosphine, TPP), the SPOs in Au11-SPO work as electron-withdrawing anionic ligands. While coordinating to gold via the phosphorus atom, the SPO ligand keeps its O atom available to act as a nucleophile. Upon photoexcitation, the clusters are found to inject holes into p-type semiconductors (here, bismuth oxide is used as a model), sensitizing the p-type semiconductor in a different way compared to the photosensitization of a n-type semiconductor. Furthermore, the Au11-SPO/Bi2O3 photocathode exhibits a much higher activity toward the hydrogenation of benzaldehyde than a TPP-protected Au11-sensitized Bi2O3 photocathode. Control experiments and density functional theory studies point to the crucial role of the cooperation between gold and the SPO ligands on the selectivity toward the hydrogenation of the C═O group in benzaldehyde.

CNT/Al2O3 core-shell nanostructures for the electrochemical detection of dihydroxybenzene isomers.

We report CNT/Al2O3 core-shell nanostructures for the electrochemical detection of dihydroxybenzene (DHB) isomers. Amorphous films of Al2O3 (1.2-15.4 nm in thickness) are uniformly deposited onto the inner and outer walls of CNTs by atomic layer deposition. The effect of the Al2O3 shell thickness on the electrochemical detection of dihydroxybenzene isomers was explored using cyclic and square-wave voltammetry. The best sensing properties are found at a shell thickness of approx. 2.4 nm (CNT/Al2O3(9) sensor), where the oxidation peak currents (sensor-signal) increased ca. 10 times as compared to a sensor fabricated with non-coated CNTs. All of the three DHB isomers (hydroquinone, catechol and resorcinol) are independently detected in the concentration ranges of 2-1000 µmol L-1, 0.5-700 µmol L-1 and 3.5-500 µmol L-1, respectively. The sensors show reliable repeatability, reproducibility, long-term stability, and applicability in the analysis of real samples. Based on these findings, a plausible mechanism is proposed highlighting the role of the Al2O3-shell.

Assessment of cerebrovascular disease with computed tomography in COVID-19 patients: correlation of a novel specific visual score with increased mortality risk.

PURPOSE: Cerebrovascular disease (CVD) is considered a major risk factor for fatal outcome in COVID-19. We aimed to evaluate the possible association between computed tomography (CT) signs of chronic CVD and mortality in infected patients. MATERIALS AND METHODS: We performed a double-blind retrospective evaluation of the cerebral CT scans of 83 COVID-19 patients looking for CT signs of chronic CVD. We developed a rapid visual score, named CVD-CT, which summarized the possible presence of parietal calcifications and dolichosis, with or without ectasia, of intracranial arteries, areas of chronic infarction and leukoaraiosis. Statistical analysis was carried out with weighted Cohen's K test for inter-reader agreement and logistic regression to evaluate the association of in-hospital mortality with CVD-CT, chest X-ray (CXR) severity score (Radiographic Assessment of Lung Edema-RALE) for radiological assessment of pulmonary disease, sex and age. RESULTS: CVD-CT (odds ratio 1.6, 95% C.I. 1.2-2.1, p = 0.001) was associated with increased risk of mortality. RALE showed an almost significant association (odds ratio 1.05, 95% C.I. 1-1.1, p 0.06), whereas age and sex did not. CONCLUSION: CVD-CT is associated with risk of mortality in COVID-19 patients. The presence of CT signs of chronic CVD may be correlated to a condition of fragility of the circulatory system, which constitutes a key risk factor for death in infected patients.

Structure, Defects, and Magnetism of Electrospun Hematite Nanofibers Silica-Coated by Atomic Layer Deposition.

In the last years, hematite has been utilized in a plethora of applications. High aspect-ratio nanohematite and hematite/silica core-shell nanostructures are arousing growing interest for applications exploiting their magnetic properties. Atomic layer deposition (ALD) is utilized here to produce SiO2-coated α-Fe2O3 nanofibers (NFs) through two synthetic routes, viz. electrospinning/calcination/ALD or electrospinning/ALD/calcination. The number of ALD cycles (10-100) modulates the coating thickness, while the chosen route controls the final nanostructure. Porous and partially hollow NFs are produced. Their hierarchical structure and the nature and density of the lattice defects and strain are characterized by combining electron microscopy, diffraction, and spectroscopy techniques. The uncoated hematite NFs mostly have surface-related strain, which is attributed to oxygen vacancies/Fe2+ sites. ALD coating causes microstrain release and decrease of surface states. NFs calcined after ALD have extensive bulk strain, which is ascribed to the presence of dislocations throughout the volume of the NF grains. Bulk strain determines the remanent magnetization, whereas both surface and bulk strain influence the coercive field and the thermal behavior across the Morin temperature, including the magnetic memory effect. To the best of the authors' knowledge, the correlation between lattice defects/strain and magnetic properties of SiO2-coated α-Fe2O3 NFs has never been reported before.

Insights into Charge Transfer at an Atomically Precise Nanocluster/Semiconductor Interface.

The deposition of an atomically precise nanocluster, for example, Ag44 (SR)30 , onto a large-band-gap semiconductor such as TiO2 allows a clear interface to be obtained to study charge transfer at the interface. Changing the light source from visible light to simulated sunlight led to a three orders of magnitude enhancement in the photocatalytic H2 generation, with the H2 production rate reaching 7.4 mmol h-1 gcatalyst -1 . This is five times higher than that of TiO2 modified with Ag nanoparticles and even comparable to that of TiO2 modified with Pt nanoparticles under similar conditions. Energy band alignment and transient absorption spectroscopy reveal that the role of the metal clusters is different from that of both organometallic complexes and plasmonic nanoparticles: A type II heterojunction charge-transfer route is achieved under UV/Vis irradiation, with the cluster serving as a small-band-gap semiconductor. This results in the clusters acting as co-catalysts rather than merely photosensitizers.

Fluorolytic Sol-Gel Route and Electrochemical Properties of Polyanionic Transition-Metal Phosphate Fluorides.

Fluorine-containing polyanionic compounds have attracted much attention in the last few years as potential positive electrode materials for rechargeable batteries. With their formula Aa Mb Xc O4 Yd (A=Li, Na…; M=Ti, V, Mn, Fe, Co, Ni…; X=P or S, and Y=F, OH, O), they offer a very rich chemistry and their electrochemical properties can be tuned by carefully choosing the different constituting elements. However, synthesis approaches that allow these materials to be obtained at low temperature are almost nonexistent. In this paper, the use of a nonaqueous fluorolytic sol-gel approach is reported to synthesize a tavorite-type LiFePO4 F material and its electrochemical characterization was performed. The obtained material displays an electrochemical performance that positively compares with the literature with an excellent cycling stability (115 mA h-1 g-1 after 100 cycles at C/2 rate). A slight change in the synthesis parameters allowed Li2 CoPO4 F to be successfully obtained, demonstrating the versatility of the reported route, which can be adapted to synthesize other fluorine-containing polyanionic compounds, which are of great interest for energy storage applications.

Atomically Precise Bimetallic Nanoclusters as Photosensitizers in Photoelectrochemical Cells.

The atomically precise bimetallic nanocluster (NC), Au24 Ag20 (PhCC)20 (SPy)4 Cl2 (1) (Py=pyridine), was employed for the first time as a stable photosensitizer for photoelectrochemical applications. The sensitization of TiO2 nanotube arrays (TNA) with 1 greatly enhances the light-harvesting ability of the composite because 1 shows a high molar extinction coefficient (ϵ) in the UV/Vis region. Compared to a more standard Au25 (SG)18 -TNA (2-TNA; SG=glutathione) composite, 1-TNA shows a much better stability under illumination in both neutral and basic conditions. The precise composition of the photosensitizers enables a direct comparison of the sensitization ability between 1 and 2. With the same cluster loading, the photocurrent produced by 1-TNA is 15 times larger than that of 2-TNA. The superior performance of 1-TNA over 2-TNA is attributed not only to the higher light absorption ability of 1 but also to the higher charge-separation efficiency. Besides, a ligand effect on the stability of the photoelectrode and charge-transfer between the NCs and the semiconductor is revealed. This work paves the way to study the role of metal nanoclusters as photosensitizers at the atomic level, which is essential for the design of better material for light energy conversion.

Highly Dispersible Hexagonal Carbon-MoS2 -Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors.

MoS2 , a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon-MoS2 -carbon was successfully synthesized through an l-cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS2 flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m2 g-1 , a total pore volume of 0.677 cm3 g-1 , and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g-1 (0.12 F cm-2 ) at a constant current density of 0.1 A g-1 ; thus suggesting that hollow carbon-MoS2 -carbon nanoplates are promising candidate materials for supercapacitors.

A Superior Sodium/Lithium-Ion Storage Material: Sea Sponge C/Sn2Fe@GO.

A well-structured anode nanomaterial, which can ensure electron and ion transport and avoid excessive pulverization, is of crucial importance to achieve high capacity with superior cycling stability for both sodium- and lithium-ion batteries (SIBs and LIBs). For the purpose of a superior rate performance, this work here has designed and successfully synthesized a new Na+/Li+ storage nanomaterial of SCS/Sn2Fe@GO through loading of a Sn2Fe nanoalloy on sea-sponge-like carbon spheres (SCSs), followed by a graphene oxide (GO) wrapping process. In such a designed composite, the SCS skeleton ensures electronic conductivity and shorts Na+ and Li+ diffusion pathways, while the Sn2Fe nanoalloy delivers a high capacity and prevents excessive pulverization. The GO shell around SCS/Sn2Fe greatly enhances the cyclability. Used as an anode, the SCS/Sn2Fe@GO nanocomposite enables a high capacity up to 660 mAh g-1 at 50 mA g-1, which is maintained without decay up to 800 cycles in SIBs, and up to 850 mAh g-1 at 500 mA g-1 after 3500 cycles in LIBs, proving its applicability in new-generation SIBs and LIBs.

Novel Synthesis of Anhydrous and Hydroxylated CuF2 Nanoparticles and Their Potential for Lithium Ion Batteries.

Anhydrous nanoscopic CuF2 is synthesized from alkoxides Cu(OR)2 (R=Me, tBu) by their reaction either in pure liquid HF at -70 °C, or under solvothermal conditions at 150 °C using excess HF and THF as solvent. Depending on the synthesis method, nanoparticles of sizes between 10 and 100 nm are obtained. The compound is highly hygroscopic and forms different hydrolysis products under moist air, namely CuF2 ⋅2 H2 O, Cu2 (OH)F3 , and Cu(OH)F, of which only the latter is stable at room temperature. CuF2 exhibits an electrochemical plateau at a potential of ≈2.7 V when cycled versus Li in half cell Li-ion batteries, which is attributed to a non-reversible conversion mechanism. The cell capacity in the first cycle depends on the particle size, being 468 mAh g-1 for ≈8 nm crystallite diameter, and 353 mAh g-1 for ≈12 nm crystallite diameter, referred to CuF2 . However, such a high capacity cannot be sustained for several cycles and the capacity rapidly fades out. The cell voltage decreases to ≈2.0 V for CuF2 ⋅2 H2 O, Cu2 (OH)F3 , and Cu(OH)F. As all the compounds studied in this work show irreversible conversion reactions, it can be concluded that copper-based fluorides are unsuitable for Li-ion battery applications.