Electrospun tecophilic/gelatin nanofibers with potential for small diameter blood vessel tissue engineering.

Tissue engineering techniques particularly using electrospun scaffolds have been intensively used in recent years for the development of small diameter vascular grafts. However, the development of a completely successful scaffold that fulfills multiple requirements to guarantee complete vascular regeneration remains challenging. In this study, a hydrophilic and compliant polyurethane namely Tecophilic (TP) blended with gelatin (gel) at a weight ratio of 70:30 (TP(70)/gel(30)) was electrospun to fabricate a tubular composite scaffold with biomechanical properties closely simulating those of native blood vessels. Hydrophilic properties of the composite scaffold induced non-thrombogenicity while the incorporation of gelatin molecules within the scaffold greatly improved the capacity of the scaffold to serve as an adhesive substrate for vascular smooth muscle cells (SMCs), in comparison to pure TP. Preservation of the contractile phenotype of SMCs seeded on electrospun TP(70)/gel(30) was yet another promising feature of this scaffold. The nanostructured TP(70)/gel(30) demonstrated potential feasibility toward functioning as a vascular graft.

Electrospun aligned PHBV/collagen nanofibers as substrates for nerve tissue engineering.

Nerve regeneration following the injury of nerve tissue remains a major issue in the therapeutic medical field. Various bio-mimetic strategies are employed to direct the nerve growth in vitro, among which the chemical and topographical cues elicited by the scaffolds are crucial parameters that is primarily responsible for the axon growth and neurite extension involved in nerve regeneration. We carried out electrospinning for the first time, to fabricate both random and aligned nanofibers of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate; PHBV) and composite PHBV/collagen nanofibers with fiber diameters in the range of 386-472 nm and 205-266 nm, respectively. To evaluate the potential of electrospun aligned nanofibers of PHBV and composite scaffolds as a substrate for nerve regeneration, we cultured nerve cells (PC12) and studied the biocompatibility effect along with neurite extension by immunostaining studies. Cell proliferation assays showed 40.01% and 5.48% higher proliferation of nerve cells on aligned PHBV/Coll50:50 nanofibers compared to cell proliferation on aligned PHBV and PHBV/Col75:25 nanofibers, respectively. Aligned nanofibers of PHBV/Coll provided contact guidance to direct the orientation of nerve cells along the direction of the fibers, thus endowing elongated cell morphology, with bi-polar neurite extensions required for nerve regeneration. Results showed that aligned PHBV/Col nanofibers are promising substrates than the random PHBV/Col nanofibers for application as bioengineered grafts for nerve tissue regeneration.

Electrospun photosensitive nanofibers: potential for photocurrent therapy in skin regeneration.

Poly(3-hexylthiophene) (P3HT) is one of the most promising photovoltaic (PV) polymers in photocurrent therapy. A novel photosensitive scaffold for skin tissue engineering was fabricated by blending P3HT with polycaprolactone (PCL) and electrospun to obtain composite PCL/P3HT nanofibers with three different weight ratios of PCL : P3HT (w/w) of 150 : 2 [PCL/P3HT(2)], 150 : 10 [PCL/P3HT(10)] and 150 : 20 [PCL/P3HT(20)]. The photosensitive properties of the blend solutions and the composite nanofibers of PCL/P3HT were investigated. The incident photon-to-electron conversion efficiencies of the PCL/P3HT(2), PCL/P3HT(10), PCL/P3HT(20) were identified as 2.0 × 10(-6), 1.6 × 10(-5) and 2.9 × 10(-5), respectively, which confirm the photosensitive ability of the P3HT-containing scaffolds. The biocompatibility of the scaffold was evaluated by culturing human dermal fibroblasts and the results showed that the proliferation of HDFs under light stimulation on PCL/P3HT(10) was 12.8%, 11.9%, and 11.6% (p ≤ 0.05) higher than the cell growth on PCL, PCL/P3HT(2) and PCL/P3HT(20), respectively. Human dermal fibroblasts cultured under light stimulation on PCL/P3HT(10) not only showed better cell proliferation but also retained cell morphology similar to the phenotype observed on tissue culture plates (control). Our experimental results suggest novel and potential application of an optimized amount of P3HT-containing scaffold, especially PCL/P3HT(10) nanofibrous scaffold in photocurrent therapy for skin regeneration.

Advances in electrospun nanofibers for bone and cartilage regeneration.

Regeneration of bone and cartilage tissues has been an important issue for biological repair in the field of regenerative medicine. The rapidly emerging field of tissue engineering holds great promise for repair and generation of functional bone and cartilage substitutes with a combination of biomaterials, cells, drugs and growth factors. Scaffolds play a pivotal role in tissue engineering as they mimic the natural extracellular matrix (ECM) and play an important role in guiding cell adhesion and proliferation, and maintaining the normal phenotype of the tissues. The use of tissue-engineered grafts based on scaffolds has found to be a more effective method than conventional implantations of autograft, allograft, xenograft. In recent years much attention has been given to electrospinning as a feasible and versatile technique for fabrication of nanofibrous scaffolds, with large surface area to volume ratio, high porosity, mechanical properties and physical dimension similar to the ECM of natural tissues. Extensive research has been carried out for fabrication polymeric nanofibrous substrates with incorporation of hydroxyapatite nanoparticles or bone morphogenetic protein molecules for efficient tissue repair. Here we review on the literature of electrospun nanofibrous scaffolds, their modifications, and advances aimed towards the rapid regeneration of bone and cartilage.

Emulsion electrospun nanofibers as substrates for cardiomyogenic differentiation of mesenchymal stem cells.

The potential of cardiomyogenic differentiation of human mesenchymal stem cells (hMSCs) on emulsion electrospun scaffold containing poly(L-lactic acid)-co-poly-(ε-caprolactone), gelatin and vascular endothelial growth factor (PLCL/GV) was investigated in this study. The characterizations of the scaffold were carried out using scanning electron microscope (SEM), transmission electron microscope, water contact angle and porometer. The proliferation of hMSCs showed that 73.4% higher cell proliferation on PLCL/GV scaffolds than that on PLCL scaffold after 20 days of cell culture. Results of 5-chloromethylfluorescein diacetate staining and SEM morphology analysis indicated that hMSCs differentiated on PLCL/GV scaffolds showed irregular morphology of cardiomyocyte phenotype compared to the typical long and thin hMSC phenotype. Immunostaining results showed the expression of alpha actinin and myosin heavy chain. Our studies identified emulsion electrospinning as a method for fabrication of core-shell fibers suitable for the differentiation of stem cells to cardiac cells, with potential application in cardiac regeneration.

Mechanical properties and in vitro behavior of nanofiber-hydrogel composites for tissue engineering applications.

Hydrogel-based biomaterial systems have great potential for tissue reconstruction by serving as temporary scaffolds and cell delivery vehicles for tissue engineering (TE). Hydrogels have poor mechanical properties and their rapid degradation limits the development and application of hydrogels in TE. In this study, nanofiber reinforced composite hydrogels were fabricated by incorporating electrospun poly(ε-caprolactone) (PCL)/gelatin 'blend' or 'coaxial' nanofibers into gelatin hydrogels. The morphological, mechanical, swelling and biodegradation properties of the nanocomposite hydrogels were evaluated and the results indicated that the moduli and compressive strengths of the nanofiber reinforced hydrogels were remarkably higher than those of pure gelatin hydrogels. By increasing the amount of incorporated nanofibers into the hydrogel, the Young's modulus of the composite hydrogels increased from 3.29 ± 1.02 kPa to 20.30 ± 1.79 kPa, while the strain at break decreased from 66.0 ± 1.1% to 52.0 ± 3.0%. Compared to composite hydrogels with coaxial nanofibers, those with blend nanofibers showed higher compressive strength and strain at break, but with lower modulus and energy dissipation properties. Biocompatibility evaluations of the nanofiber reinforced hydrogels were carried out using bone marrow mesenchymal stem cells (BM-MSCs) by cell proliferation assay and immunostaining analysis. The nanocomposite hydrogel with 25 mg ml(-1) PCL/gelatin 'blend' nanofibers (PGB25) was found to enhance cell proliferation, indicating that the 'nanocomposite hydrogels' might provide the necessary mechanical support and could be promising cell delivery systems for tissue regeneration.

Electrospun composite nanofibers for tissue regeneration.

Nanotechnology assists in the development of biocomposite nanofibrous scaffolds that can react positively to changes in the immediate cellular environment and stimulate specific regenerative events at molecular level to generate healthy tissues. Recently, electrospinning has gained huge momentum with greater accessibility of fabrication of composite, controlled and oriented nanofibers with sufficient porosity required for effective tissue regeneration. Current developments include the fabrication of nanofibrous scaffolds which can provide chemical, mechanical and biological signals to respond to the environmental stimuli. These nanofibers are fabricated by simple coating, blending of polymers/bioactive molecules or by surface modification methods. For obtaining optimized surface functionality, with specially designed architectures for the nanofibers (multi-layered, core-shell, aligned), electrospinning process has been modified and simultaneous 'electrospin-electrospraying' process is one of the most lately introduced technique in this perspective. Properties such as porosity, biodegradation and mechanical properties of composite electrospun nanofibers along with their utilization for nerve, cardiac, bone, skin, vascular and cartilage tissue engineering are discussed in this review. In order to locally deliver electrical stimulus and provide a physical template for cell proliferations, and to gain an external control on the level and duration of stimulation, electrically conducting polymeric nanofibers are also fabricated by electrospinning. Electrospun polypyrrole (PPy) and polyaniline (PAN) based scaffolds are the most extensively studied composite substrates for nerve and cardiac tissue engineering with or without electrical stimulations, and are discussed here. However, the major focus of ongoing and future research in regenerative medicine is to effectively exploit the pluripotent potential of Mesenchymal Stem Cell (MSC) differentiation on composite nanofibrous scaffolds for repair of organs.

Biomimetic microenvironment complexity to redress the balance between biodegradation and de novo matrix synthesis during early phase of vascular tissue engineering.

Physiological functionality of a tissue engineered vascular construct depends on the phenotype of smooth muscle cells (SMCs) cultured into the scaffold and mechanical robust of the construct relies on two simultaneous mechanisms including scaffold biodegradation and de novo matrix synthesis by SMCs which both can be influenced by scaffold properties and culture condition. Our focus in this study was to provide an appropriate environmental condition within tissue engineering context to meet foregoing requisites for a successful vascular regeneration. To this end, SMCs seeded onto electrospun Tecophilic/gelatin (TP(70)/gel(30)) scaffolds were subjected to orbital shear stress. Given the improvement in mechanical properties of dynamically stimulated cell-seeded constructs after a span of 10days, effect of fluctuating shear stress on scaffold biodegradation and SMC behavior was investigated. Compared to static condition, SMCs proliferated more rapidly and concomitantly built up greater collagen content in response to dynamic culture, suggesting a reasonable balance between scaffold biodegradation and matrix turnover for maintaining the structural integrity and mechanical support to seeded cells during early phase of vascular tissue engineering. Despite higher proliferation of SMCs under dynamic condition, cells preserved nearly spindle like morphology and contractile protein expression likely thanks to composition of the scaffold.

Potential of VEGF-encapsulated electrospun nanofibers for in vitro cardiomyogenic differentiation of human mesenchymal stem cells.

Heart disease, especially myocardial infarction (MI), has become the leading cause of death all over the world, especially since the myocardium lacks the ability to regenerate after infarction. The capability of mesenchymal stem cells (MSCs) to differentiate into the cardiac lineage holds great potential in regenerative medicine for MI treatment. In this study, we investigated the potential of human MSCs (hMSCs) to differentiate into cardiomyogenic cell lineages, using 5-azacytidine (5-aza) on electrospun poly(ε-caprolactone)-gelatin (PCL-gelatin) nanofibrous scaffolds. Immunofluorescence staining analysis showed that after 15 days of in vitro culture the hMSCs differentiated to cardiomyogenic cells on PCL-gelatin (PG) nanofibers and expressed a higher level of cardiac-specific proteins, such as α-actinin and troponin-T, compared to the MSC-differentiated CMs on tissue culture plates (control). To further induce the cardiac differentiation, vascular endothelial growth factor (VEGF) was incorporated into the nanofibers by blending or co-axial electrospinning, and in vitro release study showed that the growth factor could cause sustained release of VEGF from the nanofibers for a period of up to 21 days. The incorporation of VEGF within the nanofibers improved the proliferation of MSCs and, more importantly, enhanced the expression of cardiac-specific proteins on PG-VEGF nanofibers. Our study demonstrated that the electrospun PG nanofibers encapsulated with VEGF have the ability to promote cardiac differentiation of hMSCs, and might be promising scaffolds for myocardial regeneration. Copyright © 2015 John Wiley & Sons, Ltd.

Evaluation of electrospun biomimetic substrate surface-decorated with nanohydroxyapatite precipitation for osteoblasts behavior.

To engineer bone tissue, it is crucial to design scaffolds with micro- and nano-sized architecture imitating approximate hierarchical structure of native bone, and afford desirable biological properties by introducing biocompatible polymers and bioceramics into the scaffolds. Here, a novel scaffold consisting of poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV)/polyaspartic acid (PAA) was fabricated by electrospinning and nano-hydroxyapatite (nHA) was deposited by calcium-phosphate dipping process for bone tissue regeneration. Characterization of the prepared nanofibers revealed the formation of definite nHA crystal, porous structure of membranes, improved wettability with nHA deposition and satisfied mechanical properties. Human fetal osteoblasts were cultured on nanofibers and experienced in vitro evaluations of cell proliferation, adhesion and mineralization confirming the non-cytotoxicity and biocompatibility of scaffolds. Cells proliferation rate and ALP expression on PHBV/PAA-nHA were 36.40% and 40.14% higher than on PHBV/PAA, respectively. The utmost significance of this study is introducing bioactive PAA-nHA on polymeric nanofibers to regulate and improve specific cells adhesion, proliferation and mineralization of osteoblasts. All results indicate PHBV/PAA-nHA nanofibrous scaffolds can be applied as biomimetic platform for bone tissue repairation with appropriate physico-chemical properties, osteoinductivity and osteoconductivity.

Fabrication and characterization of two-layered nanofibrous membrane for guided bone and tissue regeneration application.

Membranes used in dentistry act as a barrier to prevent invasion of intruder cells to defected area and obtains spaces that are to be subsequently filled with new bone and provide required bone volume for implant therapy when there is insufficient volume of healthy bone at implant site. In this study a two-layered bioactive membrane were fabricated by electrospinning whereas one layer provides guided bone regeneration (GBR) and fabricated using poly glycerol sebacate (PGS)/polycaprolactone (PCL) and Beta tri-calcium phosphate (ß-TCP) (5, 10 and 15%) and another one containing PCL/PGS and chitosan acts as guided tissue regeneration (GTR). The morphology, chemical, physical and mechanical characterizations of the membranes were studied using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), tensile testing, then biodegradability and bioactivity properties were evaluated. In vitro cell culture study was also carried out to investigate proliferation and mineralization of cells on different membranes. Transmission electron microscope (TEM) and SEM results indicated agglomeration of ß-TCP nanoparticles in the structure of nanofibers containing 15% ß-TCP. Moreover by addition of ß-TCP from 5% to 15%, contact angle decreased due to hydrophilicity of nanoparticles and bioactivity was found to increase. Mechanical properties of the membrane increased by incorporation of 5% and 10% of ß-TCP in the structure of nanofibers, while addition of 15% of ß-TCP was found to deteriorate mechanical properties of nanofibers. Although the presence of 5% and 10% of nanoparticles in the nanofibers increased proliferation of cells on GBR layer, cell proliferation was observed to decrease by addition of 15% ß-TCP in the structure of nanofibers which is likely due to agglomeration of nanoparticles in the nanofiber structure. Our overall results revealed PCL/PGS containing 10% ß-TCP could be selected as the optimum GBR membrane in view point of physical and mechanical properties along with cell behavior. PCL/PGS nanofibers containing 10% ß-TCP were electrospun on the GTR layer for fabrication of final membrane. Addition of chitosan in the structure of PCL/PGS nanofibers was found to decrease fiber diameter, contact angle and porosity which are favorable for GTR layer. Two-layered dental membrane fabricated in this study can serve as a suitable substrate for application in dentistry as it provides appropriate osteoconductivity and flexibility along with barrier properties.

Gum tragacanth/poly(l-lactic acid) nanofibrous scaffolds for application in regeneration of peripheral nerve damage.

Nanofibrous nerve guides have gained huge interest in supporting the peripheral nerve regeneration due to their abilities to simulate the topography, mechanical, biological and extracellular matrix morphology of native tissue. Gum tragacanth (GT) is a biocompatible mixture of polysaccharides that has been used in biomedical applications. During this study, we fabricated aligned and random nanofibers from poly(l-lactic acid) and gum tragacanth (PLLA/GT) in various ratios (100:0, 75:25, and 50:50) by electrospinning. Scanning electron microscope demonstrated smooth and uniform nanofibers with diameters in the range of 733±65nm and 226±73nm for align PLLA and random PLLA/GT 50:50 nanofibers, respectively. FTIR analysis, contact angle, in vitro biodegradation and tensile measurements were carried out to evaluate the chemical and mechanical properties of the different scaffolds. PLLA/GT 75:25 exhibited the most balanced properties compared to other scaffolds and was used for in vitro culture of nerve cells (PC12) to assess the potential of using these scaffolds as a substrate for nerve regeneration. The cells were found to attach and proliferate on aligned PLLA/GT 75:25 scaffolds, expressing bi-polar neurite extensions and the orientation of nerve cells was along the direction of the fiber alignment. Results of 8 days of in vitro culture of PC12 cells on aligned PLLA/GT 75:25 nanofibers, showed 20% increase in cell proliferation compared to PLLA/GT 75:25 random nanofibers. PLLA/GT 75:25 aligned nanofibers acted as a favorable cue to support neurite outgrowth and nerve cell elongation compared with PLLA nanofibers. Our results showed that aligned PLLA/GT 75:25 nanofibers are promising substrates for application as bioengineered grafts for nerve tissue regeneration.

Electrosprayed Montelukast/poly (lactic-co-glycolic acid) particle based coating: A new therapeutic approach towards the prevention of in-stent restenosis.

UNLABELLED: Drug-eluting stents (DESs), have shown promising results in prevention of in-stent restenosis after percutaneous coronary intervention (PCI). The elevated level of leukotrienes (LTs) detected in injured arteries after PCI, together with the potential role of LTs in inflammatory cascades and structural alterations in arterial wall provides the rationale for development of therapeutic strategies for prevention of in-stent restenosis using LTs receptor antagonists. Montelukast (MK) is a selective cysLT1 receptor antagonist, with anti-inflammatory and anti-proliferative properties, which has been used for treatment of various diseases. Here, we report on the fabrication of MK/PLGA particles by electrospraying, aiming towards the development of particle based coating of DESs. The electrosprayed particles incorporated with 3% and 6% w/w MK exhibited fairly spherical shape with smooth surfaces and narrow size distribution. Sustained release of MK for up to 40days was obtained for both formulations, with higher initial burst release and drug release rate for the particles with higher drug loading. The LTD4 induced proliferation and migration of human coronary artery smooth muscle cells (HCASMCs) by 35% and 85%, respectively, which was substantially antagonized using MK incorporated particles. Nevertheless, MK antagonism preserved the normal proliferation and migration of human coronary artery endothelial cells (HCAECs). Moreover, MK antagonism inhibited the LTD4 induced phenotypic transition of HCASMCs from contractile to synthetic type. The electrosprayed MK-PLGA particles can be employed as a coating for DESs to inhibit the formation of neointimal hyperplasia responsible for in-stent restenosis, yet preserve the healing rate of the stented vessel. STATEMENT OF SIGNIFICANT: Montelukast (MK) is a selective cysLT1 receptor antagonist, with anti-inflammatory and anti-proliferative properties. The LTD4 induced proliferation and migration of human coronary artery smooth muscle cells by 35% and 85%, respectively, which was substantially antagonized using MK incorporated particles. MK antagonism preserved the normal proliferation and migration of human coronary artery endothelial cells. The MK antagonism inhibited the phenotypic transition of human coronary artery smooth muscle cells from contractile to synthetic one induced by LTD4. The electrosprayed MK-PLGA particles can be employed as coating for DESs to inhibit formation of neointimal hyperplasia, responsible for in-stent restenosis.

Fabrication of Nerve Growth Factor Encapsulated Aligned Poly(ε-Caprolactone) Nanofibers and Their Assessment as a Potential Neural Tissue Engineering Scaffold.

Peripheral nerve injury is a serious clinical problem to be solved. There has been no breakthrough so far and neural tissue engineering offers a promising approach to promote the regeneration of peripheral neural injuries. In this study, emulsion electrospinning technique was introduced as a flexible and promising technique for the fabrication of random (R) and aligned (A) Poly(ε-caprolactone) (PCL)-Nerve Growth Factor (NGF)&Bovine Serum Albumin (BSA) nanofibrous scaffolds [(R/A)-PCL-NGF&BSA], where NGF and BSA were encapsulated in the core while PCL form the shell. Random and aligned pure PCL, PCL-BSA, and PCL-NGF nanofibers were also produced for comparison. The scaffolds were characterized by Field Emission Scanning Electron Microscopy (FESEM) and water contact angle test. Release study showed that, with the addition of stabilizer BSA, a sustained release of NGF from emulsion electrospun PCL nanofibers was observed over 28 days. [3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt; MTS] assay revealed that (R/A)-PCL-NGF and (R/A)-PCL-NGF&BSA scaffolds favored cell growth and showed no cytotoxicity to PC12 cells. Laser scanning confocal microscope images exhibited that the A-PCL-NGF&BSA scaffold increased the length of neurites and directed neurites extension along the fiber axis, indicating that the A-PCL-NGF&BSA scaffold has a potential for guiding nerve tissue growth and promoting nerve regeneration.

Synthesis of polyester urethane urea and fabrication of elastomeric nanofibrous scaffolds for myocardial regeneration.

Fabrication of bioactive scaffolds is one of the most promising strategies to reconstruct the infarcted myocardium. In this study, we synthesized polyester urethane urea (PEUU), further blended it with gelatin and fabricated PEUU/G nanofibrous scaffolds. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC) and X-ray diffraction were used for the characterization of the synthesized PEUU and properties of nanofibrous scaffolds were evaluated using scanning electron microscopy (SEM), ATR-FTIR, contact angle measurement, biodegradation test, tensile strength analysis and dynamic mechanical analysis (DMA). In vitro biocompatibility studies were performed using cardiomyocytes. DMA analysis showed that the scaffolds could be reshaped with cyclic deformations and might remain stable in the frequencies of the physiological activity of the heart. On the whole, our study suggests that aligned PEUU/G 70:30 nanofibrous scaffolds meet the required specifications for cardiac tissue engineering and could be used as a promising construct for myocardial regeneration.

Synergistic effect of topography, surface chemistry and conductivity of the electrospun nanofibrous scaffold on cellular response of PC12 cells.

Electrospun nanofibrous nerve implants is a promising therapy for peripheral nerve injury, and its performance can be tailored by chemical cues, topographical features as well as electrical properties. In this paper, a surface modified, electrically conductive, aligned nanofibrous scaffold composed of poly (lactic acid) (PLA) and polypyrrole (Ppy), referred to as o-PLAPpy_A, was fabricated for nerve regeneration. The morphology, surface chemistry and hydrophilicity of nanofibers were characterized by Scanning Electron Microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and water contact angle, respectively. The effects of these nanofibers on neuronal differentiation using PC12 cells were evaluated. A hydrophilic surface was created by Poly-ornithine coating, which was able to provide a better environment for cell attachment, and furthermore aligned fibers were proved to be able to guide PC12 cells grow along the fiber direction and be beneficial for neurite outgrowth. The cellular response of PC12 cells to pulsed electrical stimulation was evaluated by NF 200 and alpha tubulin expression, indicating that electrical stimulation with a voltage of 40mV could enhance the neurite outgrowth. The PC12 cells stimulated with electrical shock showed greater level of neurite outgrowth and smaller cell body size. Moreover, the PC12 cells under electrical stimulation showed better viability. In summary, the o-PLAPpy_A nanofibrous scaffold supported the attachment, proliferation and differentiation of PC12 cells in the absence of electrical stimulation, which could be potential candidate for nerve regeneration applications.

Electrospun nylon 6/zinc doped hydroxyapatite membrane for protein separation: Mechanism of fouling and blocking model.

Development of composite nanofibrous membrane via electrospinning a polymer with ceramic nanoparticles (NPs) for application in protein separation systems is explored during this study. Positively charged zinc doped hydroxyapatite (xZH) NPs were prepared in three different compositions via chemical precipitation method. Herein, we created a positively charged surface containing nanoparticles on electrospun Nylon-6 nanofibers (NFs) to improve the separation and selectivity properties for adsorption of negatively charged protein, namely bovine serum albumin (BSA). The decline in permeate flux was analyzed using the framework of classical blocking models and fitting, demonstrated that the transition of fouling mechanisms was dominated during the filtration process. The standard blocking model provided the best fit of the experimental results during the mid-filtration period. The membrane decorated by NPs containing 4at.% zinc cations not only provided maximum BSA separation but also capable of separating higher amounts of BSA molecules (even after 1h filtration) than the pure Nylon membrane. Protein separation was achieved through this membrane with the incorporation of NPs that had high zeta potential (+5.9±0.2mV) and lower particle area (22,155nm(2)). The developed membrane has great potential to act as a high efficiency membrane for capturing BSA.

Elastic poly(ε-caprolactone)-polydimethylsiloxane copolymer fibers with shape memory effect for bone tissue engineering.

A porous shape memory scaffold with biomimetic architecture is highly promising for bone tissue engineering applications. In this study, a series of new shape memory polyurethanes consisting of organic poly(ε-caprolactone) (PCL) segments and inorganic polydimethylsiloxane (PDMS) segments in different ratios (9 : 1, 8 : 2 and 7 : 3) was synthesised. These PCL-PDMS copolymers were further engineered into porous fibrous scaffolds by electrospinning. With different ratios of PCL: PDMS, the fibers showed various fiber diameters, thermal behaviour and mechanical properties. Even after being processed into fibrous structures, these PCL-PDMS copolymers maintained their shape memory properties, and all the fibers exhibited excellent shape recovery ratios of >90% and shape fixity ratios of >92% after 7 thermo-mechanical cycles. Biological assay results corroborated that the fibrous PCL-PDMS scaffolds were biocompatible by promoting osteoblast proliferation, functionally enhanced biomineralization-relevant alkaline phosphatase expression and mineral deposition. Our study demonstrated that the PCL-PDMS fibers with excellent shape memory properties are promising substrates as bioengineered grafts for bone regeneration.

Biocompatible electrically conductive nanofibers from inorganic-organic shape memory polymers.

A porous shape memory scaffold with both biomimetic structures and electrical conductivity properties is highly promising for nerve tissue engineering applications. In this study, a new shape memory polyurethane polymer which consists of inorganic polydimethylsiloxane (PDMS) segments with organic poly(ε-caprolactone) (PCL) segments was synthesized. Based on this poly(PCL/PDMS urethane), a series of electrically conductive nanofibers were electrospun by incorporating different amounts of carbon-black. Our results showed that after adding carbon black into nanofibers, the fiber diameters increased from 399±76 to 619±138nm, the crystallinity decreased from 33 to 25% and the resistivity reduced from 3.6 GΩ/mm to 1.8 kΩ/mm. Carbon black did not significantly influence the shape memory properties of the resulting nanofibers, and all the composite nanofibers exhibited decent shape recovery ratios of >90% and shape fixity ratios of >82% even after 5 thermo-mechanical cycles. PC12 cells were cultured on the shape memory nanofibers and the composite scaffolds showed good biocompatibility by promoting cell-cell interactions. Our study demonstrated that the poly(PCL/PDMS urethane)/carbon-black nanofibers with shape memory properties could be potentially used as smart 4-dimensional (4D) scaffolds for nerve tissue regeneration.