RESUMO
While new biodegradable materials are being rapidly introduced to address plastic pollution, their end-of-life impacts remain unclear. Biodegradable plastics typically comprise a biopolymer matrix with functional additives and/or solid fillers, which may be toxic. Here, using an established method for continuous biodegradation monitoring, we investigated the impact of a commonly used plasticizer, dibutyl phthalate (DBP), on the biodegradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) in soil. The presence of DBP delayed the initial stage of PHBV biodegradation but then accelerated subsequent rates of biodegradation. Furthermore, it led to significant increases in total bacterial and fungal biomass and altered the composition of microbial communities with significant increases in the relative abundances of Thauera (gammaproteobacterial) and Mucor circinelloides (fungal) populations. It is proposed, with evidence from biodegradation behavior and microbial analysis, that the presence of DBP likely stimulated a microbial community shift, introduced higher proportions of more readily degradable amorphous regions from the plasticizing effect, and facilitated access to the bulk polymer matrix for microorganisms or at least their associated enzymes. These effects in combination overcame the initial inhibition effect of the DBP and resulted in a net increase in the rate of biodegradation of PHBV.
Assuntos
Ácidos Ftálicos , Poli-Hidroxialcanoatos , Plastificantes , Dibutilftalato/metabolismo , Biodegradação AmbientalRESUMO
BACKGROUND: Offspring of parent(s) with age-related macular degeneration (AMD) have a 45% lifetime risk of developing the disease. High foveal macular pigment optical density (MPOD) is protective, whereas individuals with a "foveal macular pigment dip" (FMPD) are at increased risk. Shortage of the dietary carotenoids lutein, zeaxanthin as well as fish consumption are reported AMD risk factors. This Early Biomarkers of AMD (EBAMD) study evaluates serum factors that protect foveal MPOD architecture in Caucasian offspring of parent(s) with AMD. METHODS: N = 130 subjects [mean (SD) age 62.8 (8.6) years; 36/94 male/female] were recruited from Scripps Health/ Scripps Memorial Hospital/ Scripps Mericos Eye Institute between 2012 and 2017. Macula pigment 3D topography was evaluated using specular reflectance. Buccal genetic cheek swab, circulating serum dietary carotenoids and long-term RBC omega-3 fatty acid status, as well as common secondary clinical structural and vision function parameters were obtained. RESULTS: 41 % of offspring of AMD parent(s) presented with FMPD. These offspring were about 4 years younger than those without FMPD (controls; P = 0.012) and had thinner foveas (P = 0.010). There were no differences in gender, BMI, % body fat, visual acuity or contrast sensitivity between those with and without FMPD. % RBC membrane docosahexaenoic acid (DHA) was reduced in FMPD offspring vs. control offspring (P = 0.04). The Omega-3 Index was significantly decreased in the FMPD group (P = 0.03). CONCLUSIONS: The percentage of FMPD in AMD offspring is nearly twice that reported for the general population in the scientific literature. Offspring presenting FMPD had similar AMD genetic risk, but significantly reduced % RBC membrane omega-3 fatty acids and thinner foveas compared with those without FMPD. Our data supports the importance of 'essential fatty' acids as an independent AMD risk factor.
Assuntos
Ácidos Graxos Ômega-3 , Degeneração Macular , Pigmento Macular , Suplementos Nutricionais , Método Duplo-Cego , Feminino , Humanos , Luteína , Degeneração Macular/epidemiologia , Masculino , Pessoa de Meia-Idade , ZeaxantinasRESUMO
BACKGROUND: Various active chemical agents, such as soil microbial inhibitors, are commonly applied to agricultural landscapes to optimize plant yields or minimize unwanted chemical transformations. Dicyandiamide (DCD) is a common nitrification inhibitor. However, it rapidly decomposes under warm and wet conditions, losing effectiveness in the process. Blending DCD with an encapsulating polymer matrix could help overcome this challenge and slow its release. Here, we encapsulated DCD in a biodegradable matrix of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and investigated the effects of DCD crystal size and loading rates on release rates. RESULTS: Three DCD crystal size fractions (0-106, 106-250 and 250-420 µm) were blended with PHBV at 200, 400, 600 and 800 gkg-1 loadings through extrusion processing and release kinetics were studied in water over 8 weeks. For loadings ≥ 600 g kg-1 , more than 95% release was reached within the first 7 days. By contrast, at 200 g kg-1 loading only 10%, 36% and 57% of the DCD was mobilized after 8 weeks in water for 0 to 106 µm, 106 to 250 µm and 250 to 420 µm crystal size fractions, respectively. CONCLUSION: The lower percolation threshold for this combination of materials lies between 200 and 400 g kg-1 DCD loading. The grind size fraction of DCD significantly affects the quantity of burst release from the surface of the pellet, particularly below the lower percolation threshold. The results presented here are likely translatable to the encapsulation and release of other crystalline materials from hydrophobic polymer matrices used in controlled release formulations, such as fertilizers, herbicides and pesticides. © 2020 Society of Chemical Industry.
Assuntos
Agroquímicos/química , Preparações de Ação Retardada/química , Composição de Medicamentos/métodos , Agricultura , Guanidinas/química , Cinética , Polímeros/químicaRESUMO
Toxoplasma gondii is an obligate, intracellular eukaryotic apicomplexan protozoan parasite that can cause fetal damage and abortion in both animals and humans. Sphingolipids are essential and ubiquitous components of eukaryotic membranes that are both synthesized and scavenged by the Apicomplexa. Here we report the identification, isolation, and analyses of the Toxoplasma serine palmitoyltransferase, an enzyme catalyzing the first and rate-limiting step in sphingolipid biosynthesis: the condensation of serine and palmitoyl-CoA. In all eukaryotes analyzed to date, serine palmitoyltransferase is a highly conserved heterodimeric enzyme complex. However, biochemical and structural analyses demonstrated the apicomplexan orthologue to be a functional, homodimeric serine palmitoyltransferase localized to the endoplasmic reticulum. Furthermore, phylogenetic studies indicated that it was evolutionarily related to the prokaryotic serine palmitoyltransferase, identified in the Sphingomonadaceae as a soluble homodimeric enzyme. Therefore this enzyme, conserved throughout the Apicomplexa, is likely to have been obtained via lateral gene transfer from a prokaryote.
Assuntos
Retículo Endoplasmático/enzimologia , Modelos Moleculares , Filogenia , Proteínas de Protozoários/metabolismo , Serina C-Palmitoiltransferase/metabolismo , Toxoplasma/enzimologia , Sequência de Aminoácidos , Domínio Catalítico , Biologia Computacional , Sequência Conservada , Dimerização , Deleção de Genes , Duplicação Gênica , Transferência Genética Horizontal , Isoenzimas/química , Isoenzimas/genética , Isoenzimas/isolamento & purificação , Isoenzimas/metabolismo , Fragmentos de Peptídeos/química , Fragmentos de Peptídeos/genética , Fragmentos de Peptídeos/metabolismo , Conformação Proteica , Domínios e Motivos de Interação entre Proteínas , Transporte Proteico , Proteínas de Protozoários/química , Proteínas de Protozoários/genética , Proteínas de Protozoários/isolamento & purificação , Proteínas Recombinantes de Fusão/química , Proteínas Recombinantes de Fusão/metabolismo , Alinhamento de Sequência , Serina C-Palmitoiltransferase/química , Serina C-Palmitoiltransferase/genética , Serina C-Palmitoiltransferase/isolamento & purificação , Homologia Estrutural de ProteínaRESUMO
Algal mass production in open systems is often limited by the availability of inorganic carbon substrate. In this paper, we evaluate how bacterial driven carbon cycling mitigates carbon limitation in open algal culture systems. The contribution of bacteria to carbon cycling was determined by quantifying algae growth with and without supplementation of bacteria. It was found that adding heterotrophic bacteria to an open algal culture dramatically enhanced algae productivity. Increases in algal productivity due to supplementation of bacteria of 4.8 and 3.4 times were observed in two batch tests operating at two different pH values over 7 days. A kinetic model is proposed which describes carbon limited algal growth, and how the limitation could be overcome by bacterial activity to re-mineralize photosynthetic end products.
Assuntos
Bactérias/crescimento & desenvolvimento , Bactérias/metabolismo , Carbono/metabolismo , Chlorella/crescimento & desenvolvimento , Chlorella/metabolismo , Concentração de Íons de HidrogênioRESUMO
Reverse Osmosis (RO) membrane filtration is a very common process for treating a wide range of groundwater types including produced water from coal seam gas (coalbed methane) wells. Mineral scaling limits water recovery for RO membranes and costs money in terms of treatment and downtime. Silica scaling can be particularly troublesome as it is often irreversible. Mitigating silica scaling requires an understanding of its occurrence, speciation mechanism and its interdependency with other operation factors. This study uses a range of techniques to show that silica colloids form during later stages of an RO process with very high recovery. This happens at silica concentrations above the solubility that would normally indicate high risk of silica scale. However, instead of scale, colloids preferentially formed which means the process can operate at high recoveries with RO performance maintained by regular cleaning cycles. The concentration of the colloidal silica through the RO stages was measured through the difference in total and dissolved silica. Once the existence was established with this technique, the particles were trapped and their size, morphology and composition were investigated with Scanning Electron Microscopy (SEM) in conjunction with Energy Dispersive X-Ray Spectroscopy (EDS). This revealed the particles to be predominantly silica with limited other elements involved.
Assuntos
Purificação da Água , Água , Água/química , Dióxido de Silício/química , Purificação da Água/métodos , Osmose , Filtração/métodos , Coloides , Carvão Mineral , Membranas ArtificiaisRESUMO
This study presents a proof of concept for a technology train that integrates polyethylene terephthalate (PET) recovery from mixed plastic waste and plastic pyrolysis. PET is depolymerized into terephthalic acid (TPA) by hydrolysis using a low volatility oil as medium, which enables (i) low-pressure operation, and (ii) a selective separation and recovery of TPA from the product mix by a simple process of filtration, washing, and precipitation. Full PET conversion and high TPA recovery (>98 %) were achieved at 260 °C. This technology train is demonstrated to be effective for processing mixed waste streams, leading to higher yield and quality of liquid product from thermal pyrolysis when compared with feedstock that has not been pre-treated. Further, the technology could be readily integrated with a plastics pyrolysis process, whereby a by-product from the pyrolysis could be used as the low-volatility oil.
Assuntos
Plásticos , Polietilenotereftalatos , Solventes , Pirólise , Reciclagem , HidrocarbonetosRESUMO
Polyhydroxyalkanoates (PHAs) are a group of natural polyesters that are synthesised by microorganisms. In general, their thermoplasticity and (in some forms) their elasticity makes them attractive alternatives to petrochemical-derived polymers. However, the high crystallinity of some PHAs - such as poly(3-hydroxybutyrate) (P3HB) - results in brittleness and a narrow processing window for applications such as packaging. The production of copolymeric PHA materials is one approach to improving the mechanical and thermal properties of PHAs. Another solution is the manufacture of PHA-based block copolymers. The incorporation of different polymer and copolymer blocks coupled to PHA, and the resulting tailorable microstructure of these block copolymers, can result in a step-change improvement in PHA-based material properties. A range of production strategies for PHA-based block copolymers has been reported in the literature, including biological production and chemical synthesis. Biological production is typically less controllable, with products of a broad molecular weight and compositional distribution, unless finely controlled using genetically modified organisms. By contrast, chemical synthesis delivers relatively controllable block structures and narrowly defined compositions. This paper reviews current knowledge in the areas of the production and properties of PHA-based block copolymers, and highlights knowledge gaps and future potential areas of research.
Assuntos
Poli-Hidroxialcanoatos , Poliésteres/química , Fenômenos FísicosRESUMO
The persistence of conventional fossil fuel-derived plastics in marine ecosystems has raised significant environmental concerns. Biodegradable plastics are being explored as an alternative. This study investigates the biodegradation behaviour in two marine environments of melt-extruded sheets of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) bioplastic as well as blends of PHBV with a non-toxic plasticiser (triethyl citrate, TEC) and composites of PHBV with wood flour. Samples were submerged for up to 35 weeks in two subtropical marine conditions: on the sandy seabed in the sublittoral benthic zone and the sandy seabed of an open air mesocosm with pumped seawater. Rates of biodegradation, lag times and times to 95 % mass loss (T95) were determined through mass loss data and Gompertz modelling. Mechanisms of biodegradation were studied through changes in molecular weight, mechanical properties and surface features. Results reveal a rapid biodegradation rate for all PHBV samples, demonstrating a range of specific biodegradation rates relative to exposed surface area of 0.03 ± 0.01 to 0.09 ± 0.04 mg.d-1.cm-2. This rapid rate of biodegradation meant that the subtle variations in biodegradation mechanisms across different sample thicknesses and additive compositions had little effect on overall lifetimes, with the T95 for most samples being around 250-350 days, regardless of site, highlighting the robust biodegradability of PHBV in seawater. It was only the PHBV-wood flour composite that showed faster biodegradation, and that was only in the exposed ocean site. The mesocosm site was otherwise shown to be a good model for the open ocean, with very comparable biodegradation rates and changes in mechanical properties over time.
Assuntos
Biodegradação Ambiental , Poluentes Químicos da Água/metabolismo , Poluentes Químicos da Água/análise , Poli-Hidroxialcanoatos/metabolismo , Água do Mar/química , Poliésteres/metabolismo , Plásticos Biodegradáveis/metabolismo , Poli-HidroxibutiratosRESUMO
Enhanced efficiency fertilizers (EEFs) can reduce nitrogen (N) losses in temperate agriculture but are less effective in the tropics. We aimed to design a new EEF and evaluate their performance in simple-to-complex tests with tropical soils and crops. We melt-extruded urea at different loadings into biodegradable polymer matrix composites using biodegradable polyhydroxyalkanoate (PHA) or polybutylene adipate-co-terephthalate (PBAT) polymers with urea distributed throughout the pellet. These contrast with commercially coated EEF that have a polymer-coated urea core. We hypothesized that matrix fertilizers would have an intermediate N release rate compared to fast release from urea or slow release from coated EEF. Nitrogen release rates in water and sand-soil columns confirmed that the matrix fertilizer formulations had a more progressive N release than a coated EEF. A more complex picture emerged from testing sorghum [Sorghum bicolor (L.) Moench] grown to maturity in large soil pots, as the different formulations resulted in minor differences in plant N accumulation and grain production. This confirms the need to consider soil interactions, microbial processes, crop physiology, and phenology for evaluating fertilizer performance. Promisingly, crop δ15N signatures emerged as an integrated measure of efficacy, tracking likely N conversions and losses. The three complementary evaluations combine the advantages of standardized high-throughput screening and more resource-intensive and realistic testing in a plant-soil system. We conclude that melt-blended biodegradable polymer matrix fertilizers show promise as EEF because they can be designed toward more abiotically or more microbially driven N release by selecting biopolymer type and N loading rate.
Assuntos
Agricultura , Fertilizantes , Nitrogênio , Polímeros , Fertilizantes/análise , Nitrogênio/análise , Agricultura/métodos , Solo/química , Biodegradação Ambiental , SorghumRESUMO
BACKGROUND: Older adults were more likely to be socially isolated during the COVID-19 pandemic, with increased risk of depression and loneliness. We aimed to investigate whether a behavioural activation intervention delivered via telephone could mitigate depression and loneliness in at-risk older people during the COVID-19 pandemic. METHODS: BASIL+ (Behavioural Activation in Social Isolation) was a pragmatic randomised controlled trial conducted among patients recruited from general practices in England and Wales, and was designed to assess the effectiveness of behavioural activation in mitigating depression and loneliness among older people during the COVID-19 pandemic. Eligible participants were aged 65 years and older, socially isolated, with a score of 5 or higher on the Patient Health Questionnaire-9 (PHQ-9), and had multiple long-term conditions. Participants were allocated in a 1:1 ratio to the intervention (behavioural activation) or control groups by use of simple randomisation without stratification. Behavioural activation was delivered by telephone; participants were offered up to eight weekly sessions with trained BASIL+ Support Workers. Behavioural activation was adapted to maintain social connections and encourage socially reinforcing activities. Participants in the control group received usual care with existing COVID-19 wellbeing resources. The primary clinical outcome was self-reported depression severity, assessed by the PHQ-9, at 3 months. Outcomes were assessed masked to allocation and analysis was by treatment allocation. This trial is registered with the ISRCTN registry (ISRCTN63034289). FINDINGS: Between Feb 8, 2021, and Feb 28, 2022, 449 eligible participants were identified and 435 from 26 general practices were recruited and randomly assigned (1:1) to the behavioural activation intervention (n=218) or to the control group (usual care with signposting; n=217). The mean age of participants was 75·7 years (SD 6·7); 270 (62·1%) of 435 participants were female, and 418 (96·1%) were White. Participants in the intervention group attended an average of 5·2 (SD 2·9) of eight remote behavioural activation sessions. The adjusted mean difference in PHQ-9 scores between the control and intervention groups at 3 months was -1·65 (95% CI -2·54 to -0·75, p=0·0003). No adverse events were reported that were attributable to the behavioural activation intervention. INTERPRETATION: Behavioural activation is an effective and potentially scalable intervention that can reduce symptoms of depression and emotional loneliness in at-risk groups in the short term. The findings of this trial add to the range of strategies to improve the mental health of older adults with multiple long-term conditions. These results can be helpful to policy makers beyond the pandemic in reducing the global burden of depression and addressing the health impacts of loneliness, particularly in at-risk groups. FUNDING: UK National Institute for Health and Care Research.
Assuntos
COVID-19 , Ocimum basilicum , Humanos , Feminino , Idoso , Masculino , País de Gales/epidemiologia , Pandemias/prevenção & controle , COVID-19/epidemiologia , COVID-19/prevenção & controle , Inglaterra/epidemiologiaRESUMO
The development of an Electrochemical System for Oxygen Control (ESOC) for examining algal photosynthetic activity as a function of dissolved oxygen (DO) is outlined. The main innovation of the tool is coulombic titration in order to balance the electrochemical reduction of oxygen with the oxygen input to achieve a steady DO set-point. ESOC allows quantification of algal oxygen production whilst simultaneously maintaining a desired DO concentration. The tool was validated abiotically by comparison with a mass transfer approach for quantifying oxygenation. It was then applied to quantify oxygen inhibition of algal activity. Five experiments, using an enriched culture of Scenedesmus sp. as the inoculum, are presented. For each experiment, ESOC was used to quantify algal activity at a series of DO set-points. In all experiments substantial oxygen inhibition was observed at DO >30 mgO2 L-1. Inhibition was shown to fit a Hill inhibition model, with a common Hill coefficient of 0.22±0.07 L mg-1 and common log10 CI50 of 27.2±0.7 mg L-1. This is the first time that the oxygen inhibition kinetic parameters have been quantified under controlled DO conditions.
Assuntos
Técnicas Eletroquímicas/instrumentação , Microalgas/metabolismo , Oxigênio/metabolismo , Scenedesmus/metabolismo , Técnicas Eletroquímicas/métodos , Cinética , Microalgas/fisiologia , Oxigênio/análise , Fotobiorreatores , Fotossíntese , Reprodutibilidade dos Testes , Scenedesmus/fisiologiaRESUMO
There is increasing pressure to upgrade effluent ponds for phosphorus removal. Active slag filters offer a solution, but design information is limited. Hydraulic retention time (HRT) is a key factor in filter design because it controls filter treatment efficiency as well the filter substrate lifespan. This paper reports on a rapid method of continual looping of effluent through a filter column to obtain a relationship between HRT and phosphorus removal efficiency. Phosphorus removal declined logarithmically with respect to retention time. While the mechanisms that yield this relationship involve complex mass transfer and adsorption of phosphorus to Fe oxyhydroxide sites, in general terms, the adsorption rate is proportional to the adsorbate effluent concentration. Waste stabilization pond effluent treated by the slag achieved phosphorus removal efficiencies over 90% at extended HRTs greater than 70 hours, while 80% removal was obtainable in 30 hours. Higher phosphorus removal was achieved for slag treating real effluent compared with synthetic phosphate solution. This can be explained by: (1) different starting phosphorus concentrations in the synthetic phosphate solution and real effluent; and (2) the presence of constituents in real effluent that can enhance phosphorus removal, such as oxidized iron compounds, cations, algae and humic complexes. This new technique, which proved capable of replicating treatment efficiencies obtained from long-term column studies, offers rapid assessment of phosphorus removal efficiency as a function of retention time and thus will enable design engineers to size active filters on the basis of achieving the required phosphorus removal standards.
Assuntos
Fósforo/isolamento & purificação , Purificação da Água/instrumentação , Esgotos/química , Fatores de TempoRESUMO
Coal seam gas (CSG) is being touted as a transition fuel as the world moves towards low-carbon economies. However, the development of CSG reserves will generate enormous volumes of saline water. In this work, we investigate the potential of using this saline water to support mass algae production. Water and brine from a CSG water treatment facility (1.6 and 11.6 g total dissolved solids per litre (TDS L(-1)) respectively) were inoculated with algal biomass from freshwater and seawater environments and supplemented with nutrients in open, fed-batch reactors. Significant algal growth was recorded, with maximum specific growth rates in CSG water and CSG brine of 0.20 +/- 0.05 d(-1) and 0.26 +/- 0.04 d(-1) respectively. These maximum specific growth rates were equal to or greater than specific growth rates in deionized water and seawater diluted to the same salinity. However, algal growth lag time in CSG brine was between 7 and 9 times longer than in other waters. Microscopy and terminal-restriction fragment length polymorphism (T-RFLP) were used to monitor community structure in the reactors. The same few algal species dominated all of the reactors, except for the CSG brine reactor at day 15. This result indicates that conditions in CSG brine select for different species of algae compared to seawater of the same salinity and other waters tested. The findings suggest that mass algae production in CSG water is feasible but algae community composition may be a function of CSG water chemistry. This has implications for the downstream use of algae.
Assuntos
Técnicas de Cultura Celular por Lotes/métodos , Reatores Biológicos/microbiologia , Eucariotos/fisiologia , Consórcios Microbianos/fisiologia , Cloreto de Sódio/metabolismo , Microbiologia da Água , Proliferação de Células , Carvão Mineral , Técnicas de Cocultura/métodos , Simulação por Computador , Gases , Modelos BiológicosRESUMO
Plastic pollution is a critical problem that has the potential for long-lasting impact. While all plastics eventually break down to at least some degree, they can remain in different transition states, such as microplastics and nanoplastics, for extended periods of time before reaching complete mineralisation to non-hazardous end products. Each of the transition states represents different types of hazards, so it is critical to understand the factors driving the lifetimes of plastics within these states. To do this, we propose a framework for assessing plastic lifetimes in natural environments based on the flow of material through potentially hazardous states: macroplastic and mesoplastic, microplastic, nanoplastic and soluble products. State changes within this framework are underpinned by three key processes: fragmentation, depolymerisation, and bioassimilation, with the pathways for generation of the different plastic states, and the lifetimes within these states, varying widely for individual materials in different environments due to their dependence on polymer material type, form and properties, and environmental factors. The critical factors driving these processes can therefore appear complex, but molecular weight, crystallinity, oxygen and water diffusivity, and inherent polymer chain reactivity (including to enzymes) are key to our understanding. By analysing currently available data that take factors such as these into consideration, we have generated information on the most likely states in which a range of plastics with different environmental degradation behaviour may exist over time in natural environments. Polyethylene (PE), for example, should be expected to fragment and accumulate in the environment as microplastic and nanoplastic. Interestingly, the state-profile for the biodegradable plastic polylactic acid (PLA) is similar, albeit over shorter timeframes. PLA also likely fragments, but then the relatively slow process of abiotic depolymerisation results in accumulation of microplastic and nanoplastic. By contrast, the state-profile for the biodegradable plastic polyhydroxyalkanoate (PHA) would be expected to be very different. The bulk material is less susceptible to embrittlement and fragmentation as a primary path to biodegradation, since the rapid enzyme catalysed depolymerisation of exposed surfaces proceeds in conjunction with bioassimilation.
Assuntos
Plásticos Biodegradáveis , Poluentes Químicos da Água , Plásticos/análise , Microplásticos , Poliésteres , Polímeros , Biodegradação Ambiental , Poluentes Químicos da Água/análiseRESUMO
Bacterially derived polyhydroxyalkanoates (PHAs) are attractive alternatives to commodity petroleum-derived plastics. The most common forms of the short chain length (scl-) PHAs, including poly(3-hydroxybutyrate) (P3HB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), are currently limited in application because they are relatively stiff and brittle. The synthesis of PHA-b-PHA block copolymers could enhance the physical properties of PHAs. Therefore, this work explores the synthesis of PHBV-b-PHBV using relatively high molecular weight hydroxy-functionalised PHBV starting materials, coupled using facile diisocyanate chemistry, delivering industrially relevant high-molecular-weight block copolymeric products. A two-step synthesis approach was compared with a one-step approach, both of which resulted in successful block copolymer production. However, the two-step synthesis was shown to be less effective in building molecular weight. Both synthetic approaches were affected by additional isocyanate reactions resulting in the formation of by-products such as allophanate and likely biuret groups, which delivered partial cross-linking and higher molecular weights in the resulting multi-block products, identified for the first time as likely and significant by-products in such reactions, affecting the product performance.
RESUMO
Paunch is a fibrous solid residue consisting of partially digested feed from the stomachs of processed cattle. It is the largest untapped solid waste stream from animals at meat processing plants, and potentially a valuable source of fibres for the production of sustainable and potentially higher-value natural biocomposite materials. Paunch was obtained from the waste effluent of a red meat processing plant, and the fibre characteristics of the as-obtained material were studied and benchmarked against wood flour and ground buffel grass, with a view to evaluating the potential of paunch as a fibre for polymer composites. The ground paunch possessed a rough fibrous surface and fibre-like characteristics that were comparable to both wood flour and ground buffel grass, demonstrating their potential for use in composites. Without any pre-treatment or compatibilisation, composites of a representative biopolymer, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and ground paunch were successfully produced for the first time via extrusion, with up to 50 wt% paunch content. Mechanical property analysis showed that, at 30 wt% content, PHBV/ground paunch composites yielded mechanical properties that were comparable to those of composites with ground buffel grass.
RESUMO
In this study, sugarcane bagasse was pretreated with acid-catalyzed alcohols, i.e., ethanol (AE), ethylene glycol (AEG) and glycerol (AG) to prepare pulps for producing lignin-containing cellulose nanofibrils (LCNF) with tailored properties, such as hydrophilicity/hydrophobicity and dispersion stability. The results showed that AG-LCNF had the highest lignin content of 16% but relatively low hydrophobicity while AE-LCNF had a low lignin content of 11% but the highest hydrophobicity. LCNF diameter distribution, crystallinity, zeta potentials and thermal stability were also determined to understand the effects of pretreatment solvent. NMR analyses revealed that alcohols modified lignin at α-position by etherification and γ-position by esterification of aliphatic chains, subsequently affecting lignin oxidation by TEMPO in the LCNF production processes, LCNF properties and LCNF dispersion in different solvents. This study provided fundamental information in the design and tailored production of LCNF for various applications, such as manufacturing polymer composites and Pickering emulsions.
Assuntos
Celulose , Saccharum , Catálise , Celulose/química , Grão Comestível , Etanol , Hidrólise , Lignina/química , Saccharum/químicaRESUMO
Hematopoietic progenitor kinase 1 (HPK1) is an MAP4K family member within the Ste20-like serine/threonine branch of the kinome. HPK1 expression is limited to hematopoietic cells and has a predominant role as a negative regulator of T cell function. Because of the central/dominant role in negatively regulating T cell function, HPK1 has long been in the center of interest as a potential pharmacological target for immune therapy. The development of a small molecule HPK1 inhibitor remains challenging because of the need for high specificity relative to other kinases, including additional MAP4K family members, that are required for efficient immune cell activation. Here, we report the identification of the selective and potent HPK1 chemical probe, A-745. In unbiased cellular kinase-binding assays, A-745 demonstrates an excellent cellular selectivity binding profile within pharmacologically relevant concentrations. This HPK1 selectivity translates to an in vitro immune cell activation phenotype reminiscent of Hpk1-deficient and Hpk1-kinase-dead T cells, including augmented proliferation and cytokine production. The results from this work give a path forward for further developmental efforts to generate additional selective and potent small molecule HPK1 inhibitors with the pharmacological properties for immunotherapy.
Assuntos
Proteínas Serina-Treonina Quinases , Linfócitos T , Fatores Imunológicos , Imunoterapia , Transdução de SinaisRESUMO
The most common way to apply Anammox for saline wastewater treatment is via salt adaptation of freshwater Anammox bacteria (FAB). To better apply this process in practice, it's essential to understand the salt adaptation process of FBA, as well as the underlying mechanisms. This study investigated the long-term salt adaptation process of a fixed-film FAB culture in three reactors (namely R1-R3), under salinities of 2, 8, and 12 NaCl g/L, correspondingly. All three reactors were under stable operation and achieved 80-90% total inorganic nitrogen removal efficiency throughout the 425-day operation period. R1 servers as a blank control, based on the clear microbial community shifts in R2 and R3, the operation period was divided into 2 phases. During Phase 1, all FAB in the three reactors belonged to Ca. Brocadia sp.. The Anammox activity (AA) and the ratio of nitrite/ammonium (NO2--N/NH4+-N) consumption in R2 and R3 decreased with the increase of salinity and did not recover to the initial levels. During Phase 2, the relative abundance of Ca. Kuenenia sp. in R2 and R3 increased from nearly 0 to about 60 and 77%, respectively. With the growth of Ca. Kuenenia sp., the AA and stoichiometry of R2 and R3 gradually recovered. AA of R2 and R3 both reached 1.0 g NH4+-N/L/day at the end of this phase, which was about 80% of that in R1. These results indicated that the salt adaptation of FAB culture was achieved by species shift from a low salt-tolerance one to a high salt-tolerance one.