Habitat modulates population-level responses of freshwater salmon growth to a century of change in climate and competition.

The impacts of climate change are widespread and threaten natural systems globally. Yet, within regions, heterogeneous physical landscapes can differentially filter climate, leading to local response diversity. For example, it is possible that while freshwater lakes are sensitive to climate change, they may exhibit a diversity of thermal responses owing to their unique morphology, which in turn can differentially affect the growth and survival of vulnerable biota such as fishes. In particular, salmonids are cold-water fishes with complex life histories shaped by diverse freshwater habitats that are sensitive to warming temperatures. Here we examine the influence of habitat on the growth of sockeye salmon (Oncorhynchus nerka) in nursery lakes of Canada's Skeena River watershed over a century of change in regional temperature and intraspecific competition. We found that freshwater growth has generally increased over the last century. While growth tended to be higher in years with relatively higher summer air temperatures (a proxy for lake temperature), long-term increases in growth appear largely influenced by reduced competition. However, habitat played an important role in modulating the effect of high temperature. Specifically, growth was positively associated with rising temperatures in relatively deep (>50 m) nursery lakes, whereas warmer temperatures were not associated with a change in growth for fish among shallow lakes. The influence of temperature on growth also was modulated by glacier extent whereby the growth of fish from lakes situated in watersheds with little (i.e., <5%) glacier cover increased with rising temperatures, but decreased with rising temperatures for fish in lakes within more glaciated watersheds. Maintaining the integrity of an array of freshwater habitats-and the processes that generate and maintain them-will help foster a diverse climate-response portfolio for important fish species, which in turn can ensure that salmon watersheds are resilient to future environmental change.

Commissioning of Mobius3D/FX for patient-specific quality assurance: The CUIMC-NewYork Presbyterian Hospital experience.

PURPOSE: To present the process undertaken by our institute in commissioning Mobius3D (M3D) for patient-specific quality assurance. METHOD: 168 plans were randomly selected to compare dose distribution measured with ArcCheck and dose calculated from M3D, both compared against the treatment planning system (TPS). The gamma criteria for measurement and M3D are 3%/2 mm with 10% and 50% dose thresholds, respectively. The effect of tissue inhomogeneity was investigated on 11 plans by recalculating the dose in M3D on a homogeneous phantom. Tolerance and action limits were established following the AAPM Task Group 218 recommendations. RESULTS: The M3D showed high variability in gamma passing rate compared to the measurement. Twenty-three out of 168 plans had false negative dose comparisons. These plans fall under high tissue inhomogeneity like lung and metal implants, small field targets, and breast plans planned with high energy. One false negative case (0.6%) was observed. A single tolerance limit of 91% and 92% gamma passing rate for the M3D and measurement-based PSQA were established, respectively. Against the expectation, recalculating plans on the homogeneous phantom in M3D did not necessarily increase the gamma passing rate. These plans have a duty cycle >4.2, and the small field sizes combined with differences in slice thickness contributed to observed dose differences in the homogeneous phantom comparisons. CONCLUSION: Following the commissioning, M3D is adopted in our institute. Currently, the gamma criteria used for measurement and M3D are 3%/2 mm, 40% dose threshold, with gamma passing rates of 92% and 95%, respectively. A higher passing rate for M3D is adopted until more data is available. The combined effect of plan modulation, the field sizes, the tissue inhomogeneity, the dose algorithm, and the volume averaging effect from differences in slice thickness can contribute to the differences in dose in M3D and TPS.

Triplets with a Twist: Ultrafast Intersystem Crossing in a Series of Electron Acceptor Materials Driven by Conformational Disorder.

Control over the populations of singlet and triplet excitons is key to organic semiconductor technologies. In different contexts, triplets can represent an energy loss pathway that must be managed (i.e., solar cells, light-emitting diodes, and lasers) or provide avenues to improve energy conversion (i.e., photon upconversion and multiplication systems). A key consideration in the interplay of singlet and triplet exciton populations in these systems is the rate of intersystem crossing (ISC). In this work, we design, measure, and model a series of new electron acceptor molecules and analyze them using a combination of ultrafast transient absorption and ultrafast broadband photoluminescence spectroscopies. We demonstrate that intramolecular triplet formation occurs within several hundred picoseconds in solution and is accelerated considerably in the solid state. Importantly, ISC occurs with sufficient rapidity to compete with charge formation in modern organic solar cells, implicating triplets in intrinsic exciton loss channels in addition to charge recombination. Density functional theory calculations reveal that ISC occurs in triplet excited states characterized by local deviations from orbital π-symmetry associated with rotationally flexible thiophene rings. In disordered films, structural distortions, therefore, result in significant increases in spin-orbit coupling, enabling rapid ISC. We demonstrate the generality of this proposal in an oligothiophene model system where ISC is symmetry-forbidden and show that conformational disorder introduced by the formation of a solvent glass accelerates ISC, outweighing the lower temperature and increased viscosity. This proposal sheds light on the factors responsible for facile ISC and provides a simple framework for molecular control over spin states.

Variants in AQP11 may result in autosomal recessive bilateral cystic renal dysgenesis.

Congenital renal cystic dysplasia is a rare disease that occurs in approximately 1 in 4000 children and is often discovered in the antenatal period by ultrasound. It is commonly associated with oligohydramnios in utero and/or renal insufficiency or failure in the postnatal period. Aquaporins are membrane proteins that serve as transport channels in the transfer of water or small solutes across cell membranes. They play a role in the development of renal cysts. Aquaporin 11 (AQP11) deficient mice develop polycystic kidney disease in utero due to disruption of polycystin-1. Here we describe a case of bilateral cystic kidney disease in a patient with novel compound heterozygous variants in AQP11: c.780G>T (p. Trp260Cys) and c.472C>T (p.Pro158Ser) (NM_173039.2) identified by whole genome sequencing. These findings suggest, for the first time, the potential role of AQP11 in congenital renal cystic dysplasia.

Tuneable emission in single molecule dyads mediated by a charge transfer state.

The demand for fluorescent organic dyes across a broad range of applications has led to investigation into tuneable emission dyes. The tuneable nature of these dyes makes them desirable for applications in a variety of fields, including organic light-emitting diodes (OLEDs), optical sensing devices, and fluorescence imaging. In recent investigations, there have only been a handful of mechanisms used to tune emission. Herein, we present four novel perylene-acene dyads that undergo solvent tuneable emission, and propose a novel mechanism for this tuneability based on the presence of a charge transfer state. These dyes were shown to reach photoluminescence quantum efficiencies (PLQEs) as high as 45%, depending on the solvent, showing the ability for this mechanism to be used to access higher PLQE tuneable emission.

Fire mosaics and habitat choice in nomadic foragers.

In the mid-1950s Western Desert of Australia, Aboriginal populations were in decline as families left for ration depots, cattle stations, and mission settlements. In the context of reduced population density, an ideal free-distribution model predicts landscape use should contract to the most productive habitats, and people should avoid areas that show more signs of extensive prior use. However, ecological or social facilitation due to Allee effects (positive density dependence) would predict that the intensity of past habitat use should correlate positively with habitat use. We analyzed fire footprints and fire mosaics from the accumulation of several years of landscape use visible on a 35,300-km2 mosaic of aerial photographs covering much of contemporary Indigenous Martu Native Title Lands imaged between May and August 1953. Structural equation modeling revealed that, consistent with an Allee ideal free distribution, there was a positive relationship between the extent of fire mosaics and the intensity of recent use, and this was consistent across habitats regardless of their quality. Fire mosaics build up in regions with low cost of access to water, high intrinsic food availability, and good access to trade opportunities; these mosaics (constrained by water access during the winter) then draw people back in subsequent years or seasons, largely independent of intrinsic habitat quality. Our results suggest that the positive feedback effects of landscape burning can substantially change the way people value landscapes, affecting mobility and settlement by increasing sedentism and local population density.

Luminescent light diffuser for diffuse lighting applications.

The lighting industry currently accounts for a significant proportion of all energy demand. Luminescent white lighting is often impure, inefficient, expensive, and detrimentally emits as a point source, meaning the light is emitted from a focused point. A luminescent light diffuser offers the potential to create a spatially broad lighting fixture. We developed a luminescent light diffuser consisting of three commercially available luminescent dye species (rhodamine 6G, fluorescein, 7-diethylamino-4-methylcoumarin) dispersed within a polymer matrix (polyvinyl alcohol), or commercial paint, and coated on a planar waveguide. A Light-emitting diode (LED) (385 nm) is directed into the waveguide which excites the luminescent species, coating the panel, creating a device that emits spatially broad pure white light. As the emission depends on escape cone emission from the waveguide, the device's emission was found to depend highly on the coating film quality and components. We present two systems: a small 40 mm × 40 mm prototype, made using standard water-soluble polymer (polyvinyl alcohol), to study the underlying operational principles, and a 100 mm × 100 mm device with optimized efficiency fabricated with a clear commercial paint. By doping the polymer matrix with scattering silica microparticles we achieved a maximum photon outcoupling efficiency of 78%, whilst maintaining colour purity with an increased device size of more than 300 times (compared with the input LED). This work shows that it is possible to construct an inexpensive and spatially broad lighting source, whilst maintaining colour purity at a low cost.

Testing for crowd out in social nudges: Evidence from a natural field experiment in the market for electricity.

This study considers the response of household electricity consumption to social nudges during peak load events. Our investigation considers two social nudges. The first targets conservation during peak load events, while the second promotes aggregate conservation. Using data from a natural field experiment with 42,100 households, we find that both social nudges reduce peak load electricity consumption by 2 to 4% when implemented in isolation and by nearly 7% when implemented in combination. These findings suggest an important role for social nudges in the regulation of electricity markets and a limited role for crowd out effects.

Effects of Flywheel Training With Eccentric Overload on Standing Balance, Mobility, Physical Function, Muscle Thickness, and Muscle Quality in Older Adults.

ABSTRACT: Hill, MW, Roberts, M, Price, MJ, and Kay, AD. Effects of flywheel training with eccentric overload on standing balance, mobility, physical function, muscle thickness, and muscle quality in older adults. J Strength Cond Res 36(11): 3190-3199, 2022-This study investigated the effects of a 6-week eccentric overload flywheel training program on vastus lateralis (VL) and gastrocnemius medialis (GM) muscle thickness and muscle quality (echo intensity), mobility (Timed Up and Go [TUG]), physical function (sit-to-stand), and balance (postural sway) performance. Nineteen subjects were assigned to either a flywheel training group ( n = 11, age = 66.4 ± 5.2 years) or a control group ( n = 8, age = 65.9 ± 3.8 years). The flywheel group underwent twice weekly squat and calf raise exercises for 6 weeks with outcome measures assessed before and after training or a time-matched control period. Throughout the training, subjects were instructed to contract as fast as possible with maximal effort during the concentric phase and to maximally resist the pull during the eccentric phase. The alpha value was a priori set at p < 0.05. Statistically significant ( p < 0.05) mean ( SD ) increases in right and left VL (7.6-9.6 ± 7.7-9.8%) and GM (8.6-8.7 ± 6.4-11.5%) muscle thickness and a reduction in VL (10.2-11.3 ± 5.9-7.9%) and GM (11.7-11.9 ± 5.6-9.6%) echo intensity were accompanied by faster TUG time (13.7 ± 7.0%) improved sit-to-stand performance (17.8-23.5 ± 7.6 - 13.4%) and reduced postural sway (29.7-42.3 ± 13.2-24.2%) after 6 weeks of flywheel training. There were no differences in any outcome measures between the treatment and control group at baseline ( p > 0.05). Overall, we observed substantial gains in muscle thickness and muscle quality, in addition to enhanced physical function, balance, and mobility performance among older adults after flywheel training, which may have important implications for preserving the functional capacity of older adults.

Human behavioral ecology and niche construction.

We examine the relationship between niche construction theory (NCT) and human behavioral ecology (HBE), two branches of evolutionary science that are important sources of theory in archeology. We distinguish between formal models of niche construction as an evolutionary process, and uses of niche construction to refer to a kind of human behavior. Formal models from NCT examine how environmental modification can change the selection pressures that organisms face. In contrast, formal models from HBE predict behavior assuming people behave adaptively in their local setting, and can be used to predict when and why people engage in niche construction. We emphasize that HBE as a field is much broader than foraging theory and can incorporate social and cultural influences on decision-making. We demonstrate how these approaches can be formally incorporated in a multi-inheritance framework for evolutionary research, and argue that archeologists can best contribute to evolutionary theory by building and testing models that flexibly incorporate HBE and NCT elements.

Comparison of pretreatment VMAT quality assurance with the integral quality monitor (IQM) and electronic portal imaging device (EPID).

The purpose of this study was to compare pretreatment volumetric modulated arc therapy (VMAT) quality assurance (QA) measurements and evaluate the multileaf collimator (MLC) error sensitivity of two detectors: the integral quality monitor (IQM) system (iRT systems IQM) and the electronic portal imaging device (EPID) (Varian PortalVision aS1200). Pretreatment QA measurements were performed for 20 retrospective VMAT plans (53 arcs). A subset of ten plans (23 arcs) was used to investigate MLC error sensitivity of each device. Eight MLC error plans were created for each VMAT plan. The errors included systematic opening/closing (±0.25, ±0.50, ±0.75 mm) of the MLC and random positional errors (1 mm) for individual/groups of leaves. The IQM was evaluated using the percent error of the measured cumulative signal relative to the calculated signal. The EPID was evaluated using two methods: a novel percent error of the measured relative to the predicted cumulative signals, and gamma (γ) analysis (1%/1 mm, 2%/2 mm, 3%/3 mm and 3%/1 mm for Stereotactic Body Radiation Therapy plans). The average change in maximum dose obtained from dose-volume histogram (DVH) data and change in detector signals for different systematic MLC shifts was also compared. Cumulative signal differences showed similar levels of agreement between measured and expected detector signals (IQM: 1.00 ± 0.55%; EPID: 1.22 ± 0.92%). Results from γ analysis lacked specificity. Only the 1%/1 mm criteria produced data with remarkable differences. A strong linear correlation was observed between IQM and EPID cumulative signal differences with MLC error magnitude (R = 0.99). Likewise, results indicate a strong correlation between the cumulative signal for both detectors and DVH dose (RIQM  = 0.99; REPID  = 0.97). In conclusion, use of cumulative signal differences could be more useful for detecting errors in treatment delivery in EPID than γ analysis.

Initial analysis of the dosimetric benefit and clinical resource cost of CBCT-based online adaptive radiotherapy for patients with cancers of the cervix or rectum.

PURPOSE: This provides a benchmark of dosimetric benefit and clinical cost of cone-beam CT-based online adaptive radiotherapy (ART) technology for cervical and rectal cancer patients. METHODS: An emulator of a CBCT-based online ART system was used to simulate more than 300 treatments for 13 cervical and 15 rectal cancer patients. CBCT images were used to generate adaptive replans. To measure clinical resource cost, the six phases of the workflow were timed. To evaluate the dosimetric benefit, changes in dosimetric values were assessed. These included minimum dose (Dmin) and volume receiving 95% of prescription (V95%) for the planning target volume (PTV) and the clinical target volume (CTV), and maximum 2 cc's (D2cc) of the bladder, bowel, rectum, and sigmoid colon. RESULTS: The average duration of the workflow was 24.4 and 9.2 min for cervical and rectal cancer patients, respectively. A large proportion of time was dedicated to editing target contours (13.1 and 2.7 min, respectively). For cervical cancer patients, the replan changed the Dmin to the PTVs and CTVs for each fraction 0.25 and 0.25 Gy, respectively. The replan changed the V95% by 9.2 and 7.9%. The D2cc to the bladder, bowel, rectum, and sigmoid colon for each fraction changed -0.02, -0.08, -0.07, and -0.04 Gy, respectively. For rectal cancer patients, the replan changed the Dmin to the PTVs and CTVs for each fraction of 0.20 and 0.24 Gy, respectively. The replan changed the V95% by 4.1 and 1.5%. The D2cc to the bladder and bowel for each fraction changed 0.02 and -0.02 Gy, respectively. CONCLUSIONS: Dosimetric benefits can be achieved with CBCT-based online ART that is amenable to conventional appointment slots. The clinical significance of these benefits remains to be determined. Managing contours was the primary factor affecting the total duration and is imperative for safe and effective adaptive radiotherapy.

The acute management of ankle fractures (Augment) study: A prospective trainee led national collaborative audit of the Boast 12 guidelines.

BACKGROUND: Ankle fractures are one of the most common fractures in adults aged 20-65 years. The British Orthopaedic Association (BOA) and British Orthopaedic Foot and Ankle Society (BOFAS) jointly produced Standards for Trauma (BOAST) BOAST 12, with the aim of reducing morbidity by standardising care of these injuries. The primary aim of the AUGMENT study was to determine the extent and clinical effect of variation from BOAST 12. METHODS: AUGMENT was a multi-centre prospective trainee led audit of consecutive patients presenting with an ankle fracture within a four-week period. Data were collected on patient demographics, comorbidities, management and 12-week outcome. The BOAST 12 standards were divided into four subgroups; documentation, imaging, management and follow-up. Percentage compliance with each subgroup was analysed. A multivariate logistic regression analysis was used to determine impact of overall compliance on likelihood of discharge in follow-up period. FINDINGS: 971 patients were included across 52 sites. The overall rate of BOAST 12 compliance was 41.7%. Variations in practice were observed in clinical documentation, especially of neurovascular status, (40.7%) and VTE assessment (61.5%). Patient management compliance with all 16 of the BOAST 12 standards was associated with a higher rate of discharge during the 12-week follow-up period (p = 0.005). CONCLUSION: AUGMENT has demonstrated that the management of ankle fractures is variable across the UK. Over half of patients had aspects of their care that were not BOAST 12 compliant. When compliance was observed, it was associated with earlier discharge from orthopaedic care.

Predicting Temporal Gait Kinematics From Running Velocity.

ABSTRACT: Gray, A, Price, M, and Jenkins, D. Predicting temporal gait kinematics from running velocity. J Strength Cond Res 35(9): 2379-2382, 2021-The manner in which stride frequency (f) changes in response to running velocity (v) is well established. Notably, as running velocity increases, duty factor (d, the % of the stride in stance) decreases, concomitantly with higher stride frequencies. Mathematical descriptions of this relationship do not exist, limiting our ability to reasonably predict gait-based metrics from wearable technologies. Therefore, the purpose of this study was to establish prediction equations for stride frequency and duty factor from running velocity. On 2 occasions, 10 healthy men (aged, 21.1 ± 2.2 years) performed constant pace running efforts at 3, 4, 5, 6, 7, and 8 m·s-1 over a 10-m segment on a tartan athletics track. Running efforts were filmed using a digital video camera at 300 frames per second, from which stride duration, support duration, and swing duration were determined. Regression equations to predict stride frequency and duty factor from running velocity were established by curve fitting. Acceptable test-retest reliability for the video-based determination of stride frequency (intraclass correlation = 0.87; typical error of the measurement [TEM] = 0.01 Hz; coefficient of variation [CV] = 2.9%) and duty factor (r = 0.93; TEM = 1%; CV = 3.9%) were established. The relationship between stride frequency and running velocity was described by the following quadratic equation: f = 0.026·v2 - 0.111·v + 1.398 (r2 = 0.903). The relationship between duty factor and running velocity was described by the quadratic equation d = 0.004·v2 - 0.061·v + 0.50 (r2 = 0.652). The relationships between v and f and between v and d are consistent with previous observations. These equations may contribute broader locomotor models or serve as input variables in data fusion algorithms that enhance outputs from wearable technologies.

The Current UK Consensus on the Management of Weber B and Posterior Ankle Fractures: A Questionnaire Study as Part of the Acute Management of Ankle Fractures (AUGMENT) Audit.

Ankle fractures are common conditions which are associated with significant morbidity when managed incorrectly. With the incidence due to triple by 2030, standards of practice were created by the British Orthopaedic Association and the British Orthopaedic Foot and Ankle Society to ensure optimal treatment. In spite of this, anecdotally there is still a variation in practice and therefore a questionnaire study was designed to explore clinician decision-making around Weber B and Posterior Malleolus ankle fractures. Five scenarios explored management regarding minimally and grossly displaced injuries, as well as the use of further imaging. The questionnaires were distributed via AUGMENT collaborators at their sites and at the British Orthopaedic Foot and Ankle Society congress 2018. About 315 questionnaires were completed and included in analysis. For Weber B injuries, overall there was a consensus across all respondents with minimally displaced and grossly displaced fractures being treated conservatively and operatively respectively. For Posterior Malleolus injuries, there was variation in practice between Foot and Ankle specialists and their non-Foot and Ankle colleagues. Computed tomography (CT) was more likely to be used to assess these injuries by specialists (97.50 vs 69.79%) and these injuries were more likely to be treated operatively across the board. This study identified key variation in practice of the management of Posterior Malleolar ankle fractures, including the use of imaging to further define the anatomy and the decision to operate. Foot and Ankle surgeons were more likely to organize CT scans and to surgically manage these injures.

Social tipping points in animal societies.

Animal social groups are complex systems that are likely to exhibit tipping points-which are defined as drastic shifts in the dynamics of systems that arise from small changes in environmental conditions-yet this concept has not been carefully applied to these systems. Here, we summarize the concepts behind tipping points and describe instances in which they are likely to occur in animal societies. We also offer ways in which the study of social tipping points can open up new lines of inquiry in behavioural ecology and generate novel questions, methods, and approaches in animal behaviour and other fields, including community and ecosystem ecology. While some behaviours of living systems are hard to predict, we argue that probing tipping points across animal societies and across tiers of biological organization-populations, communities, ecosystems-may help to reveal principles that transcend traditional disciplinary boundaries.

Cardiorespiratory and perceptual responses to self-regulated and imposed submaximal arm-leg ergometry.

PURPOSE: This study compared cardiorespiratory and perceptual responses to exercise using self-regulated and imposed power outputs distributed between the arms and legs. METHODS: Ten males (age 21.7 ± 3.4 years) initially undertook incremental arm-crank ergometry (ACE) and cycle ergometry (CYC) tests to volitional exhaustion to determine peak power output (Wpeak). Two subsequent tests involved 20-min combined arm-leg ergometry (ALE) trials, using imposed and self-regulated protocols, both of which aimed to elicit an exercising heart rate of 160 beats min-1. During the imposed trial, arm and leg intensity were set at 40% of each ergometer-specific Wpeak. During the self-regulated trial, participants were asked to self-regulate cadence and resistance to achieve the target heart rate. Heart rate (HR), oxygen uptake ([Formula: see text]), pulmonary ventilation ([Formula: see text]), and ratings of perceived exertion (RPE) were recorded continuously. RESULTS: As expected, there were no differences between imposed and self-regulated trials for HR, [Formula: see text], and [Formula: see text] (all P ≥ 0.05). However, central RPE and local RPE for the arms were lower during self-regulated compared imposed trials (P ≤ 0.05). Lower RPE during the self-regulated trial was related to preferential adjustments in how the arms (33 ± 5% Wpeak) and legs (46 ± 5% Wpeak) contributed to the exercise intensity. CONCLUSIONS: This study demonstrates that despite similar metabolic and cardiovascular strain elicited by imposed and self-regulated ALE, the latter was perceived to be less strenuous, which is related to participants doing more work with the legs and less work with the arms to achieve the target intensity.

Use of a commercial ion chamber detector array for the measurement of high spatial-resolution photon beam profiles.

Linear accelerator (linac) commissioning and quality assurance measurements are time-consuming tasks that often require a water tank scanning system to acquire profile scans for full characterization of dosimetric beam properties. To increase efficiency, a method is demonstrated to acquire variable resolution, photon beam profile data using a commercially available ion chamber array (0.5 cm detector spacing). Field sizes of 2 × 2, 5 × 5, 10 × 10, and 15 × 15 cm2 were acquired at depths in solid water of dmax , 5 cm, and 10 cm; additionally, beam profiles for field sizes of 25 × 25 and 40 × 40 cm2 were acquired at 5 cm depth in solid water at x-ray energies of 6 and 23 MV. 1D composite profiles were generated by combining discrete point measurements made at multiple couch positions. The 1D composite profile dataset was evaluated against a commissioning dataset acquired with a 3D water tank scan system utilizing (a) 0.125 cc ion chamber for 5 × 5, 10 × 10, 15 × 15, 25 × 25, and 40 × 40 field sizes and (b) a solid state detector for 2 × 2 cm2 field size. The two datasets were compared to the gamma criteria at 1%/1 mm and 2%/2 mm tolerance. Almost all pass rates exceeded 95% at 2%/2 mm except for the 6 MV 2 × 2 cm2 field size at dmax . Pass rates at 1%/1 mm ranged from 51% to 99%, with an average pass rate of 82%. A fourfold reduction in MU was achieved for scans larger than 15 × 15 cm2 using this method compared to the water tank scans. Further, dynamic wedge measurements acquired with the ion chamber array showed reasonable agreement with the treatment planning system. This method opens up new possibilities for rapid acquisition of variable resolution 2D-3D dosimetric data mitigating the need for acquiring all scan data with in-water measurements.

Equivalency of beam scan data collection using a 1D tank and automated couch movements to traditional 3D tank measurements.

This work shows the feasibility of collecting linear accelerator beam data using just a 1-D water tank and automated couch movements with the goal to maximize the cost effectiveness in resource-limited clinical settings. Two commissioning datasets were acquired: (a) using a standard of practice 3D water tank scanning system (3DS) and (b) using a novel technique to translate a commercial TG-51 complaint 1D water tank via automated couch movements (1DS). The Extensible Markup Language (XML) was used to dynamically move the linear accelerator couch position (and thus the 1D tank) during radiation delivery for the acquisition of inline, crossline, and diagonal profiles. Both the 1DS and 3DS datasets were used to generate beam models (BM1 DS and BM3 DS ) in a commercial treatment planning system (TPS). 98.7% of 1DS measured points had a gamma value (2%/2 mm) < 1 when compared with the 3DS. Static jaw defined field and dynamic MLC field dose distribution comparisons for the TPS beam models BM1 DS and BM3 DS had 3D gamma values (2%/2 mm) < 1 for all 24,900,000 data points tested and >99.5% pass rate with gamma value (1%/1 mm) < 1. In conclusion, automated couch motions and a 1D scanning tank were used to collect commissioning beam data with accuracy comparable to traditionally acquired data using a 3D scanning system. TPS beam models generated directly from 1DS measured data were clinically equivalent to a model derived from 3DS data.

Formation of Long-Lived Color Centers for Broadband Visible Light Emission in Low-Dimensional Layered Perovskites.

We investigate the origin of the broadband visible emission in layered hybrid lead-halide perovskites and its connection with structural and photophysical properties. We study ⟨001⟩ oriented thin films of hexylammonium (HA) lead iodide, (C6H16N)2PbI4, and dodecylammonium (DA) lead iodide, (C12H28N)2PbI4, by combining first-principles simulations with time-resolved photoluminescence, steady-state absorption and X-ray diffraction measurements on cooling from 300 to 4 K. Ultrafast transient absorption and photoluminescence measurements are used to track the formation and recombination of emissive states. In addition to the excitonic photoluminescence near the absorption edge, we find a red-shifted, broadband (full-width at half-maximum of about 0.4 eV), emission band below 200 K, similar to emission from ⟨110⟩ oriented bromide 2D perovskites at room temperature. The lifetime of this sub-band-gap emission exceeds that of the excitonic transition by orders of magnitude. We use X-ray diffraction measurements to study the changes in crystal lattice with temperature. We report changes in the octahedral tilt and lattice spacing in both materials, together with a phase change around 200 K in DA2PbI4. DFT simulations of the HA2PbI4 crystal structure indicate that the low-energy emission is due to interstitial iodide and related Frenkel defects. Our results demonstrate that white-light emission is not limited to ⟨110⟩ oriented bromide 2D perovskites but a general property of this class of system, and highlight the importance of defect control for the formation of low-energy emissive sites, which can provide a pathway to design tailored white-light emitters.