Suture tape augmentation improves laxity of MCL repair in the ACL reconstructed knee.

PURPOSE: Medial collateral ligament (MCL) injury is very common and surgical repair is sometimes necessary. Especially in the setting of simultaneous anterior cruciate ligament reconstruction (ACLR) as the ACL is the secondary restraint against valgus stress. The goal of this study was to evaluate knee biomechanics after suture repair of the MCL augmented with suture tape, as compared to MCL repair alone, in the setting of concomitant ACL reconstruction (ACLR). METHODS: Fifteen fresh-frozen human cadaveric knees were tested using a six-degrees-of-freedom robotic system under four loadings: (a) an 89.0 N anterior tibial load, (b) a 5.0 Nm internal and external rotation torque, (c) a 10.0 Nm valgus load, (d) a 7.0 Nm valgus load combined with 5.0 Nm internal rotation torque as a static simulated pivot-shift. The tested conditions were ACLR with the following states: (1) MCL intact, (2) MCL deficient, (3) MCL Repair, and (4) MCL repair augmented with suture tape (MCL Repair + ST). Under the different knee loadings, the tibial displacement, and the force in either the intact MCL, suture repaired MCL or repaired MCL-suture tape complex was measured. RESULTS: While neither the MCL Repair nor the MCL Repair + ST restored valgus rotation to the MCL intact state, displacement was significantly smaller after MCL Repair + ST (p < 0.05). The knee rotation under external rotation torque in MCL Repair + ST did not differ MCL intact (n.s.), while with MCL Repair the rotation was significantly greater (p < 0.05). MCL Repair + ST did not cause an over-constraint of the knee in any of the tested loading conditions. CONCLUSION: In a combined ACL-reconstruction-MCL-repair model, MCL Repair augmented with suture tape improved valgus and external rotation laxity when compared to MCL suture repair alone. Suture tape augmentation may provide this additional means of stabilization and can be added at the time of surgical repair of the MCL. Clinically this may result in lower failure rates and less residual laxity after MCL repair, as well as shorter immobilization times and faster return to play.

Notchplasty alters knee biomechanics after anatomic ACL reconstruction.

PURPOSE: The aims of this study were (1) to study the biomechanics of single-bundle anatomic ACL reconstructed knees with and without notchplasty using a robotic testing system and (2) to determine if there would be a difference between performing a small or large notchplasty. METHODS: Fifteen fresh-frozen specimens were used in this study. The ACL reconstruction (ACL-R) was performed using an anatomic single-bundle technique with the 8 mm soft tissue graft fixed at 30° with suspensory fixation on the femoral side and a screw and washer on the tibial side. The notchplasty was then created with a burr. The following knee states were compared: (1) ACL-R, (2) ACL-R with a small (3 mm) notchplasty, and (3) ACL-R with a large (6 mm) notchplasty. Four loading conditions were applied: (1) an anterior drawer with an 89 N anterior tibial load, (2) simulated pivot-shift loading, (3) a 5 Nm internal rotational moment, and (4) a 5 Nm external rotational moment. RESULTS: Under anterior tibial loading, anterior tibial translation increased, and graft force decreased significantly after ACL-R + 3 mm notchplasty and ACLR + 6 mm notchplasty compared to ACL-R alone at FE, 15° and 30° of knee flexion. There were no changes in either anterior tibial translation or graft force under simulated pivot-shift loading, internal rotational moment, or external rotational moment. CONCLUSION: When added to anatomic ACL reconstruction, notchplasty increased anterior tibial translation and decreased graft forces during low knee flexion angles. There was no difference between a small and large notchplasty. The findings of this study are clinically relevant as the purpose of anatomic ACL reconstruction is to restore normal knee laxity, and while notchplasty may be helpful in avoiding graft impingement and improving visualization, removing even 3 mm of bone leads to biomechanical changes.

Augmenting ACL Repair With Suture Tape Improves Knee Laxity: A Biomechanical Study.

Background: Anterior cruciate ligament (ACL) repair is an alternative to reconstruction; however, suture tape support may be necessary to achieve adequate outcomes. Purposes: To investigate the influence of suture tape augmentation (STA) of proximal ACL repair on knee kinematics and to evaluate the effect of the 2 flexion angles of suture tape fixation. Study Design: Controlled laboratory study. Methods: Fourteen cadaveric knees were tested using a 6 degrees of freedom robotic testing system under anterior tibial (AT) load, simulated pivot-shift (PS) load, and internal rotation (IR) and external rotation loads. Kinematics and in situ tissue forces were evaluated. Knee states tested were (1) ACL intact, (2) ACL cut, (3) ACL repair with suture only, (4) ACL repair with STA fixed at 0° of knee flexion, and (5) ACL repair with STA fixed at 20° of knee flexion. Results: ACL repair alone did not restore the intact ACL AT translation at 0°, 15°, 30°, or 60° of flexion. Adding suture tape to the repair significantly decreased AT translation at 0°, 15°, and 30° of knee flexion but not to the level of the intact ACL. With PS and IR loadings, only ACL repair with STA fixed at 20° of flexion was not significantly different from the intact state at all knee flexion angles. ACL suture repair had significantly lower in situ forces than the intact ACL with AT, PS, and IR loadings. With AT, PS, and IR loadings, adding suture tape significantly increased the in situ force in the repaired ACL at all knee flexion angles to become closer to that of the intact ACL state. Conclusion: For complete proximal ACL tears, suture repair alone did not restore normal knee laxity or normal ACL in situ force. However, adding suture tape to augment the repair resulted in knee laxity closer to that of the intact ACL. STA with fixation at 20° of knee flexion was superior to fixation with the knee in full extension. Clinical Relevance: The study findings suggest that ACL repair with STA fixed at 20° could be considered in the treatment of femoral sided ACL tears in the appropriate patient population.

Summer Dynamics of Microbial Diversity on a Mountain Glacier.

Glaciers are rapidly receding under climate change. A melting cryosphere will dramatically alter global sea levels, carbon cycling, and water resource availability. Glaciers host rich biotic communities that are dominated by microbial diversity, and this biodiversity can impact surface albedo, thereby driving a feedback loop between biodiversity and cryosphere melt. However, the microbial diversity of glacier ecosystems remains largely unknown outside of major ice sheets, particularly from a temporal perspective. Here, we characterized temporal dynamics of bacteria, eukaryotes, and algae on the Paradise Glacier, Mount Rainier, USA, over nine time points spanning the summer melt season. During our study, the glacier surface steadily darkened as seasonal snow melted and darkening agents accumulated until new snow fell in late September. From a community-wide perspective, the bacterial community remained generally constant while eukaryotes and algae exhibited temporal progression and community turnover. Patterns of individual taxonomic groups, however, were highly stochastic. We found little support for our a priori prediction that autotroph abundance would peak before heterotrophs. Notably, two different trends in snow algae emerged-an abundant early- and late-season operational taxonomic unit (OTU) with a different midsummer OTU that peaked in August. Overall, our results highlight the need for temporal sampling to clarify microbial diversity on glaciers and that caution should be exercised when interpreting results from single or few time points. IMPORTANCE Microbial diversity on mountain glaciers is an underexplored component of global biodiversity. Microbial presence and activity can also reduce the surface albedo or reflectiveness of glaciers, causing them to absorb more solar radiation and melt faster, which in turn drives more microbial activity. To date, most explorations of microbial diversity in the mountain cryosphere have only included single time points or focused on one microbial community (e.g., bacteria). Here, we performed temporal sampling over a summer melt season for the full microbial community, including bacteria, eukaryotes, and fungi, on the Paradise Glacier, Washington, USA. Over the summer, the bacterial community remained generally constant, whereas eukaryote and algal communities temporally changed through the melt season. Individual taxonomic groups, however, exhibited considerable stochasticity. Overall, our results highlight the need for temporal sampling on glaciers and that caution should be exercised when interpreting results from single or few time points.

No Difference in Knee Kinematics Between Anterior Cruciate Ligament-First and Posterior Cruciate Ligament-First Fixation During Single-Stage Multiligament Knee Reconstruction: A Biomechanical Study.

Background: For combined reconstruction of both the anterior cruciate ligament (ACL) and the posterior cruciate ligament (PCL), there is no consensus regarding which graft should be tensioned and fixed first. Purpose: The purpose of this study was to determine which sequence of graft tensioning and fixation better restores normal knee kinematics. The hypothesis was that ACL-first fixation would more closely restore normal knee kinematics, graft force, and the tibiofemoral orientation in the neutral (resting) position compared with PCL-first fixation. Study Design: Controlled laboratory study. Methods: A total of 15 unpaired human cadaveric knees were examined using a robotic testing system under the following 4 conditions: (1) 89.0-N anterior tibial load at different knee angles; (2) 89.0-N posterior tibial load at different knee angles; (3) combined rotational 7.0-N·m valgus and 5.0-N·m internal rotation load (simulated pivot shift) at 0°, 15°, and 30° of flexion; and (4) 5.0-N·m external rotation load at 0°, 15°, and 30° of flexion. The 4 evaluated knee states were (1) intact ACL and PCL (intact), (2) ACL and PCL deficient (deficient), (3) combined anatomic ACL-PCL reconstruction fixing the ACL first (ACL-first), and (4) combined anatomic ACL-PCL reconstruction fixing the PCL first (PCL-first). A 9.0 mm-diameter quadriceps tendon autograft was used for the ACL graft, tensioned with 40.0 N at 30° of flexion. A 9.5 mm-diameter hamstring tendon autograft (gracilis and semitendinosus, quadrupled loop, and augmented with an additional allograft strand if needed), tensioned with 40.0 N at 90° of flexion, was used for the PCL graft. Results: There were no statistically significant differences between ACL-first and PCL-first fixation regarding knee kinematics. ACL-first fixation restored anterior tibial translation to the intact state at all tested knee angles, while PCL-first fixation showed higher anterior tibial translation than the intact state at 90° of flexion (9.05 ± 3.05 and 5.87 ± 2.40 mm, respectively; P = .018). Neither sequence restored posterior tibial translation to the intact state at 30°, 60°, and 90° of flexion. At 15° of flexion, PCL-first fixation restored posterior tibial translation to the intact state, whereas ACL-first fixation did not. Conclusion: There were no differences in knee laxity between ACL-first and PCL-first fixation with the ACL graft fixed at 30° and the PCL graft fixed at 90°. Clinical Relevance: This study showed that there was no evidence to support the use of one tensioning sequence over the other in single-stage multiligament knee reconstruction.

Pre-existing Economic Conditions and COVID-19 Infections and Mortality in New York City.

Objectives . We investigated the association of pre-existing economic variables with COVID-19 infections and mortality in New York City. Methods . We combined ZIP code-level data from New York City's Department of Health with five-year American Community Survey data. We estimated ordinary least squares models of the prevalence of positive COVID-19 test results and deaths per 100,000 population. Results . We found ZIP codes with higher concentrations of residents living in crowded living quarters, employees in high-risk occupations, and employees commuting more than half an hour were positively and significantly associated with higher infection rates. Higher rates of crowded housing were also significantly and positively related to mortality rates, though the positive point estimates for the other two economic variables were not statistically significant. Conclusions . Economic factors such as working and living conditions beyond common measures such as poverty generate significant public health effects. Policymakers should consider these associations while designing and modifying public health policies.

Strategies to limit meat wastage: Focus on meat discoloration.

Limiting meat waste is a significant factor that can help meet future needs to provide high-quality animal protein while maximizing the utilization of natural resources. Fresh meat waste occurs during production, processing, distribution, and marketing to various points of consumption. Consumers' expectation for muscle food quality is often associated with its appearance, and a bright-red color of red meat is an indicator of freshness and wholesomeness. Meat discoloration is a natural process resulting from interactions between the physical structure of meat and the oxidation of the ferrous forms of myoglobin. Understanding the biochemical processes that influence discoloration such as oxygen consumption, metmyoglobin reducing activity, lipid oxidation, and microbial growth help to develop innovative strategies to limit meat waste. The focus of this chapter is to discuss the factors involved in meat discoloration and any other color deviations that may lead to discounted pricing and/or meat loss. The impact of meat waste, economic loss, the role of packaging, and the application of high-throughput techniques to understand the biochemical basis of meat discoloration are also discussed.

Brown meets green: light and nutrients alter detritivore assimilation of microbial nutrients from leaf litter.

In aquatic detrital-based food webs, research suggests that autotroph-heterotroph microbial interactions exert bottom-up controls on energy and nutrient transfer. To address this emerging topic, we investigated microbial responses to nutrient and light treatments during Liriodendron tulipifera litter decomposition and fed litter to the caddisfly larvae Pycnopsyche sp. We measured litter-associated algal, fungal, and bacterial biomass and production. Microbes were also labeled with 14 C and 33 P to trace distinct microbial carbon (C) and phosphorus (P) supporting Pycnopsyche assimilation and incorporation (growth). Litter-associated algal and fungal production rates additively increased with higher nutrient and light availability. Incorporation of microbial P did not differ across diets, except for higher incorporation efficiency of slower-turnover P on low-nutrient, shaded litter. On average, Pycnopsyche assimilated fungal C more efficiently than bacterial or algal C, and Pycnopsyche incorporated bacterial C more efficiently than algal or fungal C. Due to high litter fungal biomass, fungi supported 89.6-93.1% of Pycnopsyche C growth, compared to 0.2% to 3.6% supported by bacteria or algae. Overall, Pycnopsyche incorporated the most C in high nutrient and shaded litter. Our findings affirm others' regarding autotroph-heterotroph microbial interactions and extend into the trophic transfer of microbial energy and nutrients through detrital food webs.

Arthroscopic Centralization for Lateral Meniscal Injuries Reduces Laxity in the Anterior Cruciate Ligament-Reconstructed Knee.

BACKGROUND: A lateral meniscal (LM) disorder is one factor that causes rotational laxity after anterior cruciate ligament (ACL) reconstruction (ACLR). There are different types of irreparable meniscal disorders, one of which is a massive meniscal defect. HYPOTHESIS/PURPOSE: The purpose of this study was to evaluate the kinematic effects of arthroscopic centralization on an irreparable LM defect. The hypothesis was that arthroscopic centralization for an irreparable LM defect with concomitant ACLR would improve knee rotational stability. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 14 fresh-frozen human cadaveric knees were tested in 4 states: (1) intact ACL and intact lateral meniscus, (2) reconstructed ACL and intact lateral meniscus, (3) reconstructed ACL and lateral meniscus defect, and (4) reconstructed ACL and centralized lateral meniscus. Anatomic ACLR was performed using an 8 mm-diameter hamstring tendon graft. An LM defect (20% of the anteroposterior length) was created arthroscopically, and arthroscopic centralization was performed. Kinematics were analyzed using a 6 degrees of freedom robotic system under 4 knee loads: (1) an 89.0-N anterior tibial load, (2) a 5.0-N·m external rotation tibial torque, (3) a 5.0-N·m internal rotation tibial torque, and (4) a simulated pivot-shift load with a combined 7.0-N·m valgus and 5.0-N·m internal rotation tibial torque. RESULTS: LM centralization reduced anterior tibial translation similar to that of the ACLR intact LM state under anterior tibial loading (~2 mm at 30° of flexion) and showed 40% to 100% of tibial displacement in the 4 knee states under simulated pivot-shift loading. The procedure overconstrained the knee under internal rotation tibial torque and simulated pivot-shift loading. CONCLUSION: Arthroscopic centralization reduced knee laxity after ACLR for a massive LM defect in a cadaveric model. CLINICAL RELEVANCE: In cases involving irreparable LM injuries during ACLR, consideration should be given to arthroscopic centralization for reducing knee laxity. However, the procedure may overconstrain the knee in certain motions.

Oviposition Responses and Potential Larval Control Methods of Aedes albopictus (Diptera: Culicidae) in Downspout Extensions.

Aedes albopictus (Skuse) is an important invasive species and vector of several important arboviruses across the globe. This species uses small water-holding cryptic containers as egg laying sites, which pose serious challenges to effective control of adult mosquito populations. Herein, we examined the response of gravid female Ae. albopictus to various features of common downspout extension tubes associated with human dwellings and the effectiveness of control efforts to eliminate larvae. Controlled field trials quantified oviposition in 1) extensions versus rubber bowls meant to mimic other container types, 2) among different shapes and materials of extensions, and 3) among different colors of extensions. We also investigated how flushing and use of Bti larvicides could control larvae. Females were more likely to lay eggs in flat plastic or metal extensions compared to rubber bowls. Eggs were also more plentiful in flat plastic extensions versus either corrugated or metal, and dark brown corrugated extensions had more eggs compared to tan or white. Flushing reduced nearly all larvae when the extensions were properly angled, and applications of Bti pellets or dunks were effective at killing most larvae. We show that dark extensions were preferred over other colors, and that larvae can be effectively removed with minimal effort. However, effective control will likely only come from better education of the public about proper installation of extensions.

Malaria Case Detection Among Mobile Populations and Migrant Workers in Myanmar: Comparison of 3 Service Delivery Approaches.

BACKGROUND: Mobile populations and migrant workers are a key population to containing the spread of artemisinin-resistant malaria found in the border areas between Cambodia, Myanmar, and Thailand. Migrants often have limited knowledge of public health, including malaria, services in the area, and many seek care from unregulated, private vendors. METHODS: Between October 2012 and August 2016, we implemented malaria case finding and treatment in Tanintharyi Region, Kayin State, and Rakhine State of Myanmar through 3 entry points: village malaria workers (VMWs), mobile malaria clinics, and screening points. A total of 1,000 VMWs provided passive case detection and treatment services to residents in malaria-endemic villages. Active case finding through mobile malaria clinics was conducted by staff in 354 remote villages and work sites, where regular monitoring and supervision of VMWs would be difficult to maintain. Malaria screening points were a hybrid combination of active and passive case finding in which screening points were set up at fixed locations in Tanintharyi Region and Kayin State, such as bus stops, ferry docks, or informal border crossing points, and migrants entering into or departing from endemic areas could voluntarily receive malaria testing and treatment. Using routine monitoring data, we assessed and compared the malaria positive rate-the number of positive malaria cases out of those tested-across the 3 approaches as an indication of the programmatic effectiveness in identifying malaria cases in the population. Most testing was conducted with rapid diagnostic tests. RESULTS: Mobile teams (169,859) and VMWs (157,048) tested a higher number of community members than screening points (3,676) as they covered a wider geographical area. However, the malaria positive rate was higher among VMWs (7.29%) and screening points (7.10%) than mobile teams (2.64%). VMWs were located in hard-to-access areas that have higher malaria prevalence and are difficult to reach by vehicle while screening points specifically targeted mobile populations and migrant workers. Mobile teams also screened non-fever patients during their visits, which may explain their lower malaria positive rate. CONCLUSIONS: A combination of malaria testing approaches helps achieve both maximum reach and high case finding as it allows access to a range of migrant communities and provides an opportunity for continuity of service delivery as the migrants travel to their destinations.

The effect of visual perturbation upon femoral acceleration during the single and bilateral squat.

OBJECTIVES: Record femoral accelerations using a smartphone accelerometer attached to the distal thigh during single-legged (SLS) and bilateral squats, and each squat condition occurred under two visual conditions: 1) normal vision and 2) visual perturbation with stroboscopic glasses. DESIGN: Repeated-measures cross-over with counter-balanced order for four total conditions. SETTING: Laboratory. PARTICIPANTS: 22 females and 16 males without lower extremity pathologies. MAIN OUTCOME MEASURES: 2D video assessment of frontal plane projection angle, composite amplitude index of smartphone accelerometer measurements, and bivariate correlations between these two outcomes. RESULTS: A significant interaction was found for stance x vision as the difference occurred within the SLS stance condition between the visual conditions (Normal: 9.85 ± 0.06; Stroboscopic: 9.86 ± 0.07; p = 0.008 with an adjusted alpha of 0.25). Femoral accelerations were not associated (r = -0.07) with 2D video assessment of frontal plane projection angle. CONCLUSIONS: Similar to other studies using smartphone accelerometry to assess movement quality, we found that the device could detect movement variation via femoral accelerations during SLS with visual perturbation in healthy individuals.