Dynamic surgical anatomy using 3D reconstruction technology in complex hepato-biliary surgery with vascular involvement. Results from an international multicentric survey.

INTRODUCTION: Three-dimensional liver modeling can lead to substantial changes in choosing the type and extension of liver resection. This study aimed to explore whether 3D reconstruction helps to better understand the relationship between liver tumors and neighboring vascular structures compared to standard 2D CT scan images. METHODS: Contrast-enhanced CT scan images of 11 patients suffering from primary and secondary hepatic tumors were selected. Twenty-three experienced HBP surgeons participated to the survey. A standardized questionnaire outlining 16 different vascular structures (items) having a potential relationship with the tumor was provided. Intraoperative and histopathological findings were used as the reference standard. The proper hypothesis was that 3D accuracy is greater than 2D. As a secondary endpoint, inter-raters' agreement was explored. RESULTS: The mean difference between 3D and 2D, was 2.6 points (SE: 0.40; 95 % CI: 1.7-3.5; p < 0.0001). After sensitivity analysis, the results favored 3D visualization as well (mean difference 1.7 points; SE: 0.32; 95 % CI: 1.0-2.5; p = 0.0004). The inter-raters' agreement was moderate for both methods (2D: W = 0.45; 3D: W = 0.44). CONCLUSION: 3D reconstruction may give a significant contribution to better understanding liver vascular anatomy and the precise relationship between the tumor and the neighboring structures.

Multifunctionalized hydrogels foster hNSC maturation in 3D cultures and neural regeneration in spinal cord injuries.

Three-dimensional cell cultures are leading the way to the fabrication of tissue-like constructs useful to developmental biology and pharmaceutical screenings. However, their reproducibility and translational potential have been limited by biomaterial and culture media compositions, as well as cellular sources. We developed a construct comprising synthetic multifunctionalized hydrogels, serum-free media, and densely seeded good manufacturing practice protocol-grade human neural stem cells (hNSC). We tracked hNSC proliferation, differentiation, and maturation into GABAergic, glutamatergic, and cholinergic neurons, showing entangled electrically active neural networks. The neuroregenerative potential of the "engineered tissue" was assessed in spinal cord injuries, where hNSC-derived progenitors and predifferentiated hNSC progeny, embedded in multifunctionalized hydrogels, were implanted. All implants decreased astrogliosis and lowered the immune response, but scaffolds with predifferentiated hNSCs showed higher percentages of neuronal markers, better hNSC engraftment, and improved behavioral recovery. Our hNSC-construct enables the formation of 3D functional neuronal networks in vitro, allowing novel strategies for hNSC therapies in vivo.

Human Neural Stem Cell-Based Drug Product: Clinical and Nonclinical Characterization.

Translation of cell therapies into clinical practice requires the adoption of robust production protocols in order to optimize and standardize the manufacture and cryopreservation of cells, in compliance with good manufacturing practice regulations. Between 2012 and 2020, we conducted two phase I clinical trials (EudraCT 2009-014484-39, EudraCT 2015-004855-37) on amyotrophic lateral sclerosis secondary progressive multiple sclerosis patients, respectively, treating them with human neural stem cells. Our production process of a hNSC-based medicinal product is the first to use brain tissue samples extracted from fetuses that died in spontaneous abortion or miscarriage. It consists of selection, isolation and expansion of hNSCs and ends with the final pharmaceutical formulation tailored to a specific patient, in compliance with the approved clinical protocol. The cells used in these clinical trials were analyzed in order to confirm their microbiological safety; each batch was also tested to assess identity, potency and safety through morphological and functional assays. Preclinical, clinical and in vitro nonclinical data have proved that our cells are safe and stable, and that the production process can provide a high level of reproducibility of the cultures. Here, we describe the quality control strategy for the characterization of the hNSCs used in the above-mentioned clinical trials.

Symptomatic Uncomplicated Diverticular Disease and Incidence of Unexpected Abscess during Sigmoidectomy: A Multicenter Prospective Observational Study.

BACKGROUND: Symptomatic uncomplicated diverticular disease can affect patients' everyday routine. Considerable efforts have been made to identify clinical features that correlate to the severity of the disease. Unexpected intraoperative abscesses are reported in large retrospective series, showing how uncomplicated symptoms and presentations can underlie a complicated disease. The aim of this study was to investigate the incidence of pericolic or intramural abscess in patients undergoing elective sigmoidectomy for symptomatic uncomplicated diverticular disease and see if chronic symptoms correlate to the presence of an abscess. METHODS: Between January 2016 and June 2018, we prospectively collected data of patients who were given indication to elective sigmoidectomy for symptomatic uncomplicated diverticular disease. Patients were divided into 3 groups: acute resolving, smoldering, and atypical according to a previously described classification of uncomplicated diverticular disease. RESULTS: One hundred fifty-eight consecutive patients were enrolled in the study. The median age was 63 years (22- 88), and the mean body mass index was 26 (±7) kg/m2. There were 114 patients in the acute resolving group, 36 in the smoldering group, and 8 in the atypical group. An unexpected abscess was reported in 75 patients (47.5%) during surgery or pathological examination. The incidence of -abscess was greater for patient in the smoldering group (p = 0.0243). CONCLUSION: Our series of patients affected by symptomatic uncomplicated diverticular disease showed an incidence of unexpected pericolic or intramural abscess of 47.5%. Patients affected by smoldering diverticular disease presented a greater abscess rate.

Cross-Linked Self-Assembling Peptides and Their Post-Assembly Functionalization via One-Pot and In Situ Gelation System.

Supramolecular nanostructures formed through peptide self-assembly can have a wide range of applications in the biomedical landscape. However, they often lose biomechanical properties at low mechanical stress due to the non-covalent interactions working in the self-assembling process. Herein, we report the design of cross-linked self-assembling peptide hydrogels using a one-pot in situ gelation system, based on 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide/N-hydroxysulfosuccinimide (EDC/sulfo-NHS) coupling, to tune its biomechanics. EDC/sulfo-NHS coupling led to limited changes in storage modulus (from 0.9 to 2 kPa), but it significantly increased both the strain (from 6% to 60%) and failure stress (from 19 to 35 Pa) of peptide hydrogel without impairing the spontaneous formation of ß-sheet-containing nano-filaments. Furthermore, EDC/sulfo-NHS cross-linking bestowed self-healing and thixotropic properties to the peptide hydrogel. Lastly, we demonstrated that this strategy can be used to incorporate bioactive functional motifs after self-assembly on pre-formed nanostructures by functionalizing an Ac-LDLKLDLKLDLK-CONH2 (LDLK12) self-assembling peptide with the phage display-derived KLPGWSG peptide involved in the modulation of neural stem cell proliferation and differentiation. The incorporation of a functional motif did not alter the peptide's secondary structure and its mechanical properties. The work reported here offers new tools to both fine tune the mechanical properties of and tailor the biomimetic properties of self-assembling peptide hydrogels while retaining their nanostructures, which is useful for tissue engineering and regenerative medicine applications.

Low Ligation of Inferior Mesenteric Artery in Laparoscopic Anterior Resection for Rectal Cancer Reduces Genitourinary Dysfunction: Results From a Randomized Controlled Trial (HIGHLOW Trial).

OBJECTIVES: The aim of the present study was to compare the incidence of genitourinary (GU) dysfunction after elective laparoscopic low anterior rectal resection and total mesorectal excision (LAR + TME) with high or low ligation (LL) of the inferior mesenteric artery (IMA). Secondary aims included the incidence of anastomotic leakage and oncological outcomes. BACKGROUND: The criterion standard surgical approach for rectal cancer is LAR + TME. The level of artery ligation remains an issue related to functional outcome, anastomotic leak rate, and oncological adequacy. Retrospective studies failed to provide strong evidence in favor of one particular vascular approach and the specific impact on GU function is poorly understood. METHODS: Between June 2014 and December 2016, patients who underwent elective laparoscopic LAR + TME in 6 Italian nonacademic hospitals were randomized to high ligation (HL) or LL of IMA after meeting the inclusion criteria. GU function was evaluated using a standardized survey and uroflowmetric examination. The trial was registered under the ClinicalTrials.gov Identifier NCT02153801. RESULTS: A total of 214 patients were randomized to HL (n = 111) or LL (n = 103). GU function was impaired in both groups after surgery. LL group reported better continence and less obstructive urinary symptoms and improved quality of life at 9 months postoperative. Sexual function was better in the LL group compared to HL group at 9 months. Urinated volume, maximum urinary flow, and flow time were significantly (P < 0.05) in favor of the LL group at 1 and 9 months from surgery. The ultrasound measured post void residual volume and average urinary flow were significantly (P < 0.05) better in the LL group at 9 months postoperatively. Time of flow worsened in both groups at 9 months compared to baseline. There was no difference in anastomotic leak rate (8.1% HL vs 6.7% LL). There were no differences in terms of blood loss, surgical times, postoperative complications, and initial oncological outcomes between groups. CONCLUSIONS: LL of the IMA in LAR + TME results in better GU function preservation without affecting initial oncological outcomes. HL does not seem to increase the anastomotic leak rate.

Compliance to Adjuvant Chemotherapy of Patients Who Underwent Surgery for Rectal Cancer: Report from a Multi-institutional Research Network.

INTRODUCTION: Adjuvant chemotherapy for locally advanced rectal cancer is associated with improved overall survival. However, recent evidence from randomized trials showed a compliance rate of 43 to 73%, which may affect efficacy. The aim of this multicenter retrospective analysis was to investigate the compliance rate to adjuvant treatment for patients who underwent rectal surgery for cancer. METHODS: Patients who underwent surgery with curative intent for rectal cancer in six Italian colorectal centers between January 2013 and December 2017 were retrospectively reviewed. Exclusion criteria were age less than 18 years, palliative or emergency surgery, and stage IV disease. Parameters of interest were patients' characteristics, preoperative tumor stage, neo-adjuvant chemoradiation therapy, intra-operative and postoperative outcomes. Although the participating centers referred to the same treatment guidelines for treatment, the chemotherapy regiment was not standardized across the institutions. Reasons for not starting adjuvant chemotherapy when indicated, interruption, and modification of drug regimen were collected to investigate compliance. RESULTS: A total of 572 patients were included in the analysis. Two hundred and fifty-two (44.1%) patients received neo-adjuvant chemoradiation therapy. All patients underwent high anterior rectal resection, low anterior rectal resection, or Miles' procedure. Of 399 patients with an indication to adjuvant chemotherapy, 176 (44.1%) completed the treatment as planned. Compliance for patients who started chemotherapy was 56% (95% CI 50.4-61.6%). Sixty-six patients interrupted the treatment, 76 patients significantly reduced the drug dose, and 41 patients had to switch to other therapeutic regimens. CONCLUSIONS: The present multicenter investigation reports a low compliance rate to adjuvant chemotherapy after rectal resection for cancer. Multidisciplinary teams should focus on future effort to improve compliance for these patients.

Design Parameters of Tissue-Engineering Scaffolds at the Atomic Scale.

Stem-cell behavior is regulated by the material properties of the surrounding extracellular matrix, which has important implications for the design of tissue-engineering scaffolds. However, our understanding of the material properties of stem-cell scaffolds is limited to nanoscopic-to-macroscopic length scales. Herein, a solid-state NMR approach is presented that provides atomic-scale information on complex stem-cell substrates at near physiological conditions and at natural isotope abundance. Using self-assembled peptidic scaffolds designed for nervous-tissue regeneration, we show at atomic scale how scaffold-assembly degree, mechanics, and homogeneity correlate with favorable stem cell behavior. Integration of solid-state NMR data with molecular dynamics simulations reveals a highly ordered fibrillar structure as the most favorable stem-cell scaffold. This could improve the design of tissue-engineering scaffolds and other self-assembled biomaterials.

Routine clinical application of virtual reality in abdominal surgery.

BACKGROUND: The advantages of 3D reconstruction, immersive virtual reality (VR) and 3D printing in abdominal surgery have been enunciated for many years, but still today their application in routine clinical practice is almost nil. We investigate their feasibility, user appreciation and clinical impact. MATERIAL AND METHODS: Fifteen patients undergoing pancreatic, hepatic or renal surgery were studied realizing a 3D reconstruction of target anatomy. Then, an immersive VR environment was developed to import 3D models, and some details of the 3D scene were printed. All the phases of our workflow employed open-source software and low-cost hardware, easily implementable by other surgical services. A qualitative evaluation of the three approaches was performed by 20 surgeons, who filled in a specific questionnaire regarding a clinical case for each organ considered. RESULTS: Preoperative surgical planning and intraoperative guidance was feasible for all patients included in the study. The vast majority of surgeons interviewed scored their quality and usefulness as very good. CONCLUSIONS: Despite extra time, costs and efforts necessary to implement these systems, the benefits shown by the analysis of questionnaires recommend to invest more resources to train physicians to adopt these technologies routinely, even if further and larger studies are still mandatory.

Recent therapeutic approaches for spinal cord injury.

A spinal cord injury (SCI) often causes permanent changes in strength and sensation functions below the site of the injury and affects thousands of people each year. Transplantation of stem cells is a promising approach in acute SCI as it may support spinal cord repair. However, in case of chronic SCI greater amounts of nervous tissue have to be regenerated, leaving scaffold transplantation the only feasible option for cellular engraftment and nervous bridging. The aim of regenerative medicine, specifically tissue engineering, is to create a microenvironment that mimics native extracellular matrix (ECM), capable of promoting specific cell-matrix interactions, coaxing cell behavior, and fostering host tissue regeneration. In this regard, nanostructured scaffolds are currently the most promising advanced substrates capable of supporting nervous fiber ingrowth and delivery of neurotrophic drugs. Among them, electrospinning technique and Self-Assembling Peptides (SAPs) have recently attracted lots of attention for their reproducible synthesis and high tailorability. This review highlights clinical trials and recent encouraging strategies for spinal cord repair comprising both cell therapy and nanomedicine.

Structural and Biomechanical Properties of Supramolecular Nanofiber-Based Hydrogels in Biomedicine.

The field of supramolecular nanofiber-based hydrogels in biomedicine has witnessed remarkable growth over the past two decades [...].

In Situ Transglutaminase Cross-Linking Improves Mechanical Properties of Self-Assembling Peptides for Biomedical Applications.

The development of three-dimensional (3D) biomaterials that mimic natural tissues is required for efficiently restoring physiological functions of injured tissues and organs. In the field of soft hydrogels, self-assembled peptides (SAPs) stand out as distinctive biomimetic scaffolds, offering tunable properties. They have garnered significant attention in nanomedicine due to their innate ability to self-assemble, resulting in the creation of fibrous nanostructures that closely mimic the microenvironment of the extracellular matrix (ECM). This unique feature ensures their biocompatibility and bioactivity, making them a compelling area of study over the past few decades. As they are soft hydrogels, approaches are necessary to enhance the stiffness and resilience of the SAP materials. This work shows an enzymatic strategy to selectively increase the stiffness and resiliency of functionalized SAPs using transglutaminase (TGase) type 2, an enzyme capable of triggering the formation of isopeptide bonds. To this aim, we synthesized a set of SAP sequences and characterized their cross-linking via rheological experiments, atomic force microscopy (AFM), thioflavin-T binding assay, and infrared spectroscopy (ATR-FTIR) tests. The results showed an improvement of the storage modulus of cross-linked SAPs at no cost of the maximum stress-at-failure. Further, in in vitro tests, we examined and validated the TGase capability to cross-link SAPs without hampering seeded neural stem cells (hNSCs) viability and differentiation, potentially leaving the door open for safe in situ cross-linking reactions in vivo.

Panitumumab in combination with infusional oxaliplatin and oral capecitabine for conversion therapy in patients with colon cancer and advanced liver metastases. The MetaPan study.

BACKGROUND: Preoperative chemotherapy improves the outcome in patients with colorectal cancer with liver metastases. In the current study, the authors evaluated the activity of a conversion treatment with the combination of capecitabine plus oxaliplatin (XELOX) used in association with panitumumab in patients with unresectable, liver-only, metastatic colon cancer. METHODS: Chemotherapy-naive patients with unresectable liver metastases from colon cancer with no other metastatic disease sites were enrolled. All patients received upfront therapy with XELOX plus panitumumab (P-XELOX) and were reevaluated for resectability every 4 cycles. The primary endpoint was the objective response rate (ORR). Secondary endpoints were overall survival (OS), progression-free survival, the percentage of patients whose disease became radically resectable, and the safety of the P-XELOX combination. RESULTS: A total of 49 patients were recruited, 35 of whom had wild-type KRAS (wtKRAS) and 14 of whom (who were enrolled before study amendment) had unknown (9 patients) or mutated (5 patients) KRAS mutational status. Forty-six patients were evaluable for response. After conversion P-XELOX therapy, the ORR in the general population was 54%, with 2 complete responses, 23 partial responses, and 14 cases of stable disease. In patients with wtKRAS, the ORR of the patients reached 65% (2 CRs and 19 PRs), which allowed 15 patients with initial unresectable liver metastasis to be reclassified as having resectable disease. Survival analysis demonstrated a median progression-free survival of 8.5 months and a median OS of 21.9 months. Patients who underwent surgery were found to have a significantly better OS when compared with those who did not undergo surgery (P < .001). Overall, toxicities were found to be predictable and manageable, with the most common being cutaneous, gastrointestinal, and neurologic toxicities. CONCLUSIONS: Conversion P-XELOX therapy yields high response and resectability rates for patients with metastatic colon cancer with extensive liver involvement.

Totally laparoscopic versus laparoscopic-assisted right colectomy for colon cancer: is there any advantage in short-term outcomes? A prospective comparative assessment in our center.

BACKGROUND: Several techniques are described in the literature about laparoscopic treatment of the right colon. Among them, laparoscopic-assisted colectomy (LAC) with creation of an extracorporeal ileocolonic anastomosis remains the favourite approach in most centers. So far, total laparoscopic colectomy (TLC) with intracorporeal anastomosis is not widely performed, because it requires adequate skills and competence in the use of mechanical linear staplers and laparoscopic manual sutures. The purpose of this study was to determine prospectively if TLC offers some advantages in short-term outcomes over LAC. METHODS: A prospective comparative study was designed for 80 consecutive patients who were alternatively treated with TLC and LAC for right colon neoplasms. The following data were collected: operative time, intra- and postoperative complication rate, time to bowel movement, hospitalization time, length of minilaparotomy, number of harvested lymph nodes, and specimen length. RESULTS: Operative time in TLC resulted significantly longer than in LAC (230 vs. 203 min), complication rate was similar in both groups, with no case of anastomotic dehiscence, two anastomotic bleedings in TLC vs. three in LAC and one case of postoperative ileus for each group. One case of death occurred in LAC patient developing a postoperative severe cardiopulmonary syndrome. Time to first flatus was in favour of TLC (2.2 vs. 2.6 days), whereas hospitalization was comparable. As regards to the oncological parameters of radicality, the specimen length was superior in TLC group, but the number of lymph nodes excised was equivalent. The length of the minilaparotomy was clearly shorter in TLC group (5.5 vs. 7.2 cm). CONCLUSIONS: No evidence of relevant differences in terms of functional and safety outcomes between the two laparoscopic procedures. TLC determines less abdominal manipulation and shorter incision length, but clear advantages must be still demonstrated. Larger series are necessary to test the superiority of totally laparoscopic procedures for right colectomy.

The EURO-NOTES clinical registry for natural orifice transluminal endoscopic surgery: a 2-year activity report.

BACKGROUND: The EURO-NOTES Clinical Registry (ECR) was established as a European database to allow the monitoring and safe introduction of Natural Orifice Transluminal Endoscopic Surgery (NOTES). The aim of this study was to analyze different techniques applied and relative results during the first 2 years of the ECR. METHODS: The ECR was designed as a voluntary database with online access. All members of the European Society for Gastrointestinal Endoscopy and the European Association for Endoscopic Surgery were requested to participate in the registry. Demographic and therapy data as well as data on the postoperative course are recorded in the ECR in an anonymous way. RESULTS: A total of 533 patients who underwent NOTES procedures were included in the study. Four different hybrid techniques for 435 cholecystectomies were described, registering postoperative complications in 2.8% of patients, addition of a single trocar in 5.3%, and conversions to laparoscopy in 0.5%. Both flexible endoscopic and rigid laparoscopic cholecystectomy techniques proved to be safe and effective with minor differences. There was a shorter operative time in the rigid laparoscopic group. Thirty-three appendectomies were reported by transgastric and transvaginal techniques, with transvaginal techniques scoring shorter operative time and hospital stay, but with a frequent need to add more trocars. Overall complications occurred in 14.7% of patients but they did not differ significantly among the different techniques. One transvaginal and 31 transanal sigmoidectomies were included for prolapse and diverticulitis, with four postoperative complications (12.5%), but none needing further treatment. Twenty peroral esophageal myotomies were included with three postoperative complications (15.0%), but none needing further treatment. CONCLUSIONS: Five years since the introduction of NOTES into clinical practice, hybrid techniques have gained considerable clinical application. Several NOTES hybrid cholecystectomy and appendectomy techniques are practicable and safe alternatives to laparoscopic procedures. Also, sigmoidectomies and peroral esophageal myotomies were described, proving feasibility and safety. Nevertheless, the real benefit of NOTES for patients still needs to be assessed.

Biomimetic scaffolds using triply periodic minimal surface-based porous structures for biomedical applications.

The design of biomimetic porous scaffolds has been gaining attention in the biomedical sector lately. Shells, marine sponges, shark teeth, cancellous bone, sea urchin spine, and the armadillo armor structure are examples of biological systems that have already been studied to drive the design of innovative, porous, and multifunctional structures. Among these, triply periodic minimal surfaces (TPMSs) have attracted the attention of scientists for the fabrication of biomimetic porous scaffolds. The interest stems from their outstanding properties, which include mathematical controllable geometry features, highly interconnected porous architectures, high surface area to volume ratio, less stress concentration, tunable mechanical properties, and increased permeability. All these distinguishing features enable better cell adhesion, optimal integration to the surrounding tissue avoiding stress shieldings, a good permeability of fluid media and oxygen, and the possibility of vascularization. However, the sophisticated geometry of these TPMS-based structures has proven challenging to fabricate by conventional methods. The emergence of additive manufacturing (AM) and the enhanced manufacturing freedoms and flexibility it guarantees could solve some of the bottlenecks, thus leading to a surge of interest in designing and fabricating such structures in this field. Also, the feasibility of using AM technologies allows for obtaining size programmable TPMS printable in various materials, from polymers to metal alloys. Here, a comprehensive overview of 3D-printed TPMS porous structures is provided from a design for additive manufacturing (DfAM) and application perspective. First, design strategies, geometry design algorithms, and related topological optimization are introduced according to diverse requirements. Based on that, the performance control of TPMS and the pros and cons of the different AM processes for fabricating TPMS scaffolds are summarized. Lastly, practical applications of 3D-printed biomimetic TPMS porous structures for the biomedical field are presented to clarify the advantages and potential of such structures.

Unleashing the Power of Artificial Intelligence in Materials Design.

The integration of artificial intelligence (AI) algorithms in materials design is revolutionizing the field of materials engineering thanks to their power to predict material properties, design de novo materials with enhanced features, and discover new mechanisms beyond intuition. In addition, they can be used to infer complex design principles and identify high-quality candidates more rapidly than trial-and-error experimentation. From this perspective, herein we describe how these tools can enable the acceleration and enrichment of each stage of the discovery cycle of novel materials with optimized properties. We begin by outlining the state-of-the-art AI models in materials design, including machine learning (ML), deep learning, and materials informatics tools. These methodologies enable the extraction of meaningful information from vast amounts of data, enabling researchers to uncover complex correlations and patterns within material properties, structures, and compositions. Next, a comprehensive overview of AI-driven materials design is provided and its potential future prospects are highlighted. By leveraging such AI algorithms, researchers can efficiently search and analyze databases containing a wide range of material properties, enabling the identification of promising candidates for specific applications. This capability has profound implications across various industries, from drug development to energy storage, where materials performance is crucial. Ultimately, AI-based approaches are poised to revolutionize our understanding and design of materials, ushering in a new era of accelerated innovation and advancement.

Computational Mechanics of Form-Fitting 3D-Printed Lattice-Based Wrist-Hand Orthosis for Motor Neuron Disease.

Motor neuron disease (MND) patients often experience hand-wrist muscle atrophy resulting in severe social consequences and hampering their daily activities. Although hand-wrist orthosis is commonly used to assist weakened muscles, its effectiveness is limited due to the rapid progression of the disease and the need for customization to suit individual patient requirements. To address these challenges, this study investigates the application of three-dimensional (3D) printing technology to design and fabricate two lattice structures inspired by silkworm cocoons, using poly-ε-caprolactone as feedstock material. Finite element method (FEM) analysis is employed to study the mechanical behavior, enabling control over the geometric configuration incorporated into the hand-wrist orthosis. Through tensile displacement and three-point bending simulations, the stress distribution is examined for both lattice geometries. Geometry-1 demonstrates anisotropic behavior, while geometry-2 exhibits no strict directional dependence due to its symmetry and uniform node positioning. Moreover, the biocompatibility of lattices with human skin fibroblasts is investigated, confirming excellent biocompatibility. Lastly, the study involves semi-structured interviews with MND patients to gather feedback and develop prototypes of form-fitting 3D-printed lattice-based hand-wrist orthosis. By utilizing 3D printing technology, this study aims to provide customized orthosis that can effectively support weakened muscles and reposition the hand for individuals with MND.

Laparoscopic gastrectomies for cancer: The ACOI-IHTSC national guidelines.

Guidelines for laparoscopy and cancer of stomach have been outlined by several scientific societies: The main recommendation being that laparoscopy should be used only by surgeons already highly skilled in gastric surgery. The laparoscopic approach to gastric cancer surgery has become more and more frequent in most Italian centers. On behalf of the Guideline Committee of the Italian Society of Hospital Surgeons and the Italian Hi-Tech Surgical Club, a panel of experts analyzed the highest evidence of all scientific papers focusing on laparoscopic gastrectomies for cancer and published from 2003 to 2011, and drew these national guidelines. Laparoscopic gastrectomy may be considered as a safe procedure with better short-term and comparable long-term results. compared to open gastrectomy (Grade A). There is a general agreement that a laparoscopic approach to the treatment of gastric cancer should be chosen only by surgeons already highly skilled in gastric surgery and other advanced laparoscopic interventions. Furthermore, the first procedures should be carried out during a tutoring program. Diagnostic laparoscopy is strongly recommended as the first step of laparoscopic as well as laparotomic gastrectomies (Grade B). Additional randomized controlled trials (RCT) that compare and investigate the long-term oncological outcomes of laparoscopic assisted gastrectomy are required.

Laparoscopic and mini-invasive surgery.

BACKGROUND: JGCA Gastric Cancer Treatment Guidelines (2004) include Laparoscopic Assisted Distal Gastrectomy (LADG) within the chapter of modified surgery. A metanalysis published in 2010 shows that LADG is significantly superior to Open Distal Gastrectomy (ODG) if comparing short term outcomes. Oncologic results prove to be comparable to ODG by one RCT and 2 retrospective studies. Little evidence is available on Laparoscopic Total Gastrectomy and concerns are raised about long-term oncologic outcomes. MATERIALS AND METHODS: Laparoscopic Subtotal Gastrectomy is carried out with 4 to 5 ports in the periumbilical region (Hasson trocar for laparoscope) and upper quadrants. After exploration of the abdominal cavity surgical steps include coloepiploic detachment, omentectomy, dissection of the gastrocolic ligament, division of the left gastroepiploic vessels, division of right gastroepiploic vessels, division of pyloric vessels. The duodenum is transected with a linear stapler. Incision of the lesser omentum and dissection of the hepatoduodenal ligament allows completion of D2 lymphadenectomy. The 4/5ths of the stomach are transected starting from the greater curve at the junction of left and right gastroepiploic arcades by linear stapler. Roux-en-Y loop reconstruction is performed through a stapled side-to-side gastro-jejunal anastomosis and a side-to-side jejuno-jejunal anastomosis. Reconstruction after Laparoscopic Total Gastrectomy is performed preferably by a side-to-side esophago-jejunal anastomosis according to Orringer. DISCUSSION AND CONCLUSION: A robotic assisted approach adds precision on lymphadenectomy and reconstructive techniques.